Welcome to the new FrameMaker scripting forum
As FM10 now has built-in scripting via ExtendScript, this sub-forum was set up as a venue for discussions related to the ins and out of using ExtendScript.
As well, questions on FrameScript and FDK programming are welcome here.
If you missed the kick-off webinar on May 26th by Rick Quatro on FM10 & Extendscript, the slides and sample scripts are available on Rick's blog here:
http://frameautomation.com/2011/05/31/framemaker-10-extendscript-slides/
Hi!.
We have Portal 3.0.9.8.3 patch (over 9ias 1.0.2.2.2a Minimal edition) and... a lot of problems about performance. We4ve oracle 9i(repository) running in another server,NT PIII 512MB RAM.
I4m getting the following errors:
1) portlet could not be contacted
2) Timeout occurred whilst retrieving page meta data
3) timeout for content....
I had increase the timeout's params...but without success.
It seems that DB process takes a lot!!!
Sometimes, after the third "refresh", I get the rigth page.
What4s happening??
I must to use 3.0.9.8.2 patch??
thanks,
Adrian.
Similar Messages
-
Welcome to the New NI Discussion Forums!
We are excited to present the NEW and IMPROVED NI Discussion Forums to you, our valued community members!
The community not only had a face-lift, it now offers a full set of advanced personalization features and it is available in seven languages!
Here are some tips to help you get around the new system:
What do the boxes next to the user names mean?
This is the new user ranking system. The three boxes represent the user’s score in the three performance metrics: ratings, posts, and logins. The darker the box is shaded, the higher the user has scored in that performance metric.
The box on the left is the average message rating the user has received.
The box in the center is the total number of posts the user has contributed to the community.
The box on the right is the number of times the user has logged into the community.
The blue boxes designate the user is an NI Employee while the gold boxes are reserved for NI Partners and customers.
How do I find a thread from the old system in the new system?
If you have the title of the thread, we recommend searching for it using the search bar at the top or bottom of the page.
If you do not have the title of thread or cannot find it with search, but you know that you posted to the thread, we recommend that you login and click on your Alias at the top of the page to view your profile. From your profile page, click on the Find All Posts by this User link and scroll through the results to find the thread.
If you do not have the title of the thread and you didn’t post to it, but you know the Alias of someone else who did post to the thread, conduct a User search to find that user. Click on their Alias to view their profile page and then use the Find All Posts by this User link to find the thread.
If you do not have the title of the thread and you don’t know the Alias of any user who posted to it, we recommend browsing the board that you believe it would be in until you find it.
How do I personalize the forums?
Once you login, click on the My Profile link at the top of the page. From the tabs on this page, you can modify your time zone, ratings preference, font size, emoticon style, etc to personalize your experience. As long as you remember to Save Changes before you leave the tabs, your forum will be personalized for you each time you login.
What languages are supported?
The user interface is translated into the following languages:
Chinese (Simplified)
Chinese (Traditional)
English
French
Korean
Japanese
Spanish
Note: The language in the My Preferences tab in the forums only controls the language for that session. As soon as you logout and login again, your language will be reset to the language that you have configured in your NI User Profile. To modify the language configured in your NI User Profile, visit www.ni.com/profile.
What was migrated?
Questions
Answers
Comments
Average Ratings per Answer
Attachments
Alias
Number of Questions Posted (Total Started Threads)
Number of Answers & Comments Posted (Total Replies)
Average Ratings Received per User
Board Subscriptions
What was NOT migrated?
Topics
Opinions
Replies
Polls
Average Ratings Given
Message Subscriptions
Keywords associated with Board Subscriptions
Enthusiast Subscriptions
Enthusiast Biographies
What does Float mean?
You can choose to pin boards or threads to the top of the lists so that when you are logged in they are the first things you see. To do this, click on the up arrow to the right of the board or message you want to Float to the top of your lists. When you no longer want this message or board at the top of your lists, you can click the arrow again to UnFloat the board or message.
Why are there smiley faces in the sample code pieces?
There are times when the pieces of code include the same characters that are used to create an emoticon in the forums. To disable emoticons so that you can see the code correctly, follow these steps:
Sign In or Register to the forums if you are not already logged in
Click My Profile in the User Bar at the top of the page
Click My Preferences to view the My Preferences tab
Change the Emoticon Type to None in the My Preferences tab in your Profile
Click Save Changes
Now when you browse to the thread, the code should be displayed correctly.
Emoticons will no longer be displayed in any messages you view in the forums until you change the Emoticon Type back to one of the other types.
If you have additional questions or feedback about the upgrade, refer to the Help or post to the Feedback on NI Discussion Forums board.
Molly K
Web Support Manager
National InstrumentsMessage Edited by Support on 11-20-2004 06:14 AM
Molly K.
Web Support & Operations Manager
National InstrumentsJust a couple of comments:
1. In the CVI forum, I couldn't post a message which included the C #include syntax with angle brackets. It interpreted the angle brakcets as HTML, gave me an HTML syntax error, and deleted the angle brackets as well as the .h file they enclosed. There may be a way in HTML to escape the angle brakcets so they can be included as text rather than interpreted as HTML, but I shouldn't have to do that in a C forum.
2. When I got the HTML error message above, it also deleted the file I had attached so when I posted the message, there was no attachment.
3. I don't get automatic hyperlinks in any posts I read or create. The text of the URL is there, but I can't just click to link to the new page. Am I missing some option?
4. Older but updated messages don't come to the top. I like to see new activity even if I'm not subscribed to that thread.
5. When reviewing the list of messages in the forums, I'd like to see the ratings of the author and of the reply (even before opening the message). In the old forums, the messages where tagged "Answered by Enthusiast" and/or "High rating".
6. I'd like to see the buttons to rate an answer even if I'm not logged. If I try to rate an answer when I'm not logged on, it could prompt me to log on first. If the rating buttons are only available if you're logged on, I think the number of ratings will be drastically reduced.
7. I miss the list of top contributors (formerly known as Enthusiasts). I think it was a good way to foster community and to get to know active members. It also generated some friendly competition to see who had more posts and who had higher ratings.
8. I liked the old organization with two sections to show the newest answered questions separate from the newest unanswered questions.
9. Some of the new search options are good additions. I'd like to combine the user search and the message search. For example, I might like to search for any message from Bilal on DLLs.
10. I had to make this a Top 10 list. I'm impressed by the amount of work that went into the new forums. Keep it up! -
FrameMaker Scripting forum?
I was hoping to start a discussion on the new FrameMaker Scripting board, but found I could neither start a new discussion nor reply to an existing one.
Is it locked for some reason? Would it be inappropriate to ask for input here? Is anyone aware of other forums where ExtendScript for FrameMaker is being discussed?Sorry, but the nice (@$!%^*!!!!*@^!) Jive Software is misbehaving. It seems like only some accounts can start a discussion. I've paged the Adobe-admin and hopefully this will be cleared up shortly.
-
Welcome to the NEW Skype Web SDK forum!
Hello and welcome to the new Skype Web SDK forum!
This forum is dedicated to the new Skype Web SDK, the html5/javascript web client API for Skype for Business Server 2015. This API also has some compatibility with Lync Server 2013. This API only supports on-premise environments.
When asking a question, please specify your environment: device, OS, browser, server, and any other related information.
-- How To Ask a Question: http://support.microsoft.com/kb/555375 -- This posting is provided "AS IS" with no warranties, and confers no rights. Use of included script samples are subject to the terms specified at http://www.microsoft.com/info/cpyright.htmoutdated self response..after 25 tries i was able to correct my spelling in the real post
-
Welcome to the new forums for GroupWise 2014. You can find more information about GroupWise 2014 at http://www.novell.com/products/groupwise/
Here you can ask questions, share experiences, and talk to others about your 2014 experiences and/or get the information you need about upgrading to this new version of GroupWise.
Thank You for participating with us in this community and sharing your knowledge/experiences!Forums,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com -
Welcome to the SAP Education & Research forum!
Welcome to the SAP Education & Research forum!
This forum is a great way for you to share your SAP knowledge or get help from SAP experts worldwide on the range of SAP Education & Research topics and products. Before you post, take a look at our [Forum Guide|http://wiki.sdn.sap.com/wiki/display/SCNGUIDE/Forums].
Please also check our [Wiki FAQ|http://wiki.sdn.sap.com/wiki/display/HER/FAQ] and use the search before you post. More detailed [rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], can be found on the Wiki.
Implementation guidelines, cookbooks, etc, can be found on the [BPX page|http://www.sdn.sap.com/irj/bpx/highered] for SAP Education & Research
Happy posting!
The Community Team
Rob and SilkeI'm not sure that it is actually possible to parameterize the DYNR. Anyway, it would still leave you the problem that the field descriptors in the command interface would all be wrong.
My suggestion for getting around this is to make several recordings using the SAPGUI command, creating a new command for each screen change. You can then edit the script so that the different cases between which you want to differentiate are separated by IF...ELSEIF...ENDIF commands.
You might then have something that looks like this (pseudocode):
* SAPGUI command for common "opening part" of transaction
IF (subtype = 'LA').
*SAPGUI covering screen 2001
ELSEIF (subtype = 'LW').
* SAGPGUI covering screen 2000
ENDIF.
* SAPGUI for common "closing part" of transaction - if relevant. -
Welcome to the new Oracle User Group Community
Welcome to the new Oracle User Group Community. Whether you landed here via the redirect from the previous community site - IOUC.org - or navigated here directly, welcome. This new platform brings new community features to enhance the way you connect with user group peers and with Oracle, as well as make it easier for you to find information through a more intuitive interface. We invite you to provide your feedback on the new site. Log in using your OTN Forum credentials and join the discussion here. If you do not yet have OTN Forum log in credentials, navigate to http://community.oracle.com/community, click on the "Register" link in the upper right corner of the page and create your account.
We look forward to hearing from you.Hi Kashif,
Glad you like the new Community. Communication among user group leaders works a little differently on this site than on the previous site. Rather than having communication focus around e-mail distribution lists, communication now is focused within the site itself. The intent is that this will provide users the one place to come for information, rather than having to sort through lots of e-mail threads. That doesn't mean that e-mail is completely out of the picture though. Users can opt-in to receive e-mail notifications when an individual piece of content is changed, or when content is posted to a space. Look for the "Receive email notifications" link under "Actions" to start receiving notices. To stop receiving notices, go back to the same content/space and click "Stop email notifications".
Your Relationship Manager will be talking with you and the other leaders in your region over the next few days and weeks regarding how you and your group of leaders want to communicate.
Best regards,
Oracle User Group Team -
Welcome to the Novell File Reporter Forum
Welcome to the new Novell File Reporter forum. You can find information
about this product here: http://www.novell.com/products/file-reporter/
This forum is for discussions about this product.On 19/01/2012 18:00, Novell wrote:
> Welcome to the Kanaka for Mac forum. See the press release:
>
> http://www.novell.com/news/press/201...available.html
"Novell Kanaka for Mac is available to Open Enterprise Server customers
with a current maintenance license and can be downloaded through the
Novell Customer Center at http://www.novell.com/center."
To find your Kanaka download click My Products then Novell Open
Enterprise Server.
> Thanks for adding your experiences, knowledge, and questions here in the
> forums.
Documentation is available at http://www.novell.com/documentation/kanaka/
A video with an overview of the product is also available at
http://www.novell.com/communities/no...lient-solution
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details. -
Welcome to the Kanaka for Mac Forum
Welcome to the Kanaka for Mac forum. See the press release:
http://www.novell.com/news/press/201...available.html
Thanks for adding your experiences, knowledge, and questions here in the
forums.On 19/01/2012 18:00, Novell wrote:
> Welcome to the Kanaka for Mac forum. See the press release:
>
> http://www.novell.com/news/press/201...available.html
"Novell Kanaka for Mac is available to Open Enterprise Server customers
with a current maintenance license and can be downloaded through the
Novell Customer Center at http://www.novell.com/center."
To find your Kanaka download click My Products then Novell Open
Enterprise Server.
> Thanks for adding your experiences, knowledge, and questions here in the
> forums.
Documentation is available at http://www.novell.com/documentation/kanaka/
A video with an overview of the product is also available at
http://www.novell.com/communities/no...lient-solution
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details. -
Anyone tried the new Weblogic Scripting Tool (WLST)?
Has anyone tried using the new WebLogic Scripting Tool (WLST) that was recently
posted on the dev2dev WebLogic Utilities site: http://dev2dev.bea.com/resourcelibrary/utilitiestools/adminmgmt.jsp
It looks to be a handy tool that is built upon jython and enables you to easily
navigate, inspect and manipulate the WebLogic MBean tree on a running server.
It also has a nice scripting tool which allows you to convert a config.xml file
into a script that can be run to recreate a domain or specific resources within
the domain. This is exactly something I have been looking for because we occasionally
recreate domains or subsets of a domain for testing and POC purposes.
The utility is fairly well documented and works well for the most part. The only
issue I have run into so far is that is does not seem to understand JMS Distributed
Destinations. When I try to convert a config.xml that contains a DD to a script
it throws a null pointer exception. I have not tried a cluster yet.
I noticed the utility was authored by someone at BEA. Is there potential that
BEA will support this in the future if it catches on? Has anyone had experience
with WLST or jython that would cause you to reccomend (or not) using it?
Thanks.Darryl,
Thanks for the valuable feedback. My comments are inline.
Darryl Stoflet wrote:
As a fairly long time wlshell user who recently started testing wlst there are
few features I have found lacking in wlst.
1. For monitoring purposes I am frequently using the -g and -r options to wlshell's
get command for graphing and repeating respectivelyI haven't looked at -g and -r options in wlshell, but will do so.
Although there is no graphical monitoring of attributes in wlst, but
there is certainly some monitoring capability (which will be enhanced
further in the coming version). Please take a look at the
monitorAttribute() function.
wls:/(offline)> help('monitorAttribute')
Description:
Monitors the specified attribute every by polling every interval.
Syntax:
monitorAttribute(attributeName, interval, monitorFile)
attributeName = Name of the attribue that you would like to monitor.
interval = Time (in seconds) to wait before the next fetch
monitorFile=[optional] File path where the monitored data will be
written to.
Example:
wls:/mydomain/runtime/ServerRuntimes/myserver/ExecuteQueueRuntimes/weblogic.kernel.Default>
monitorAttribute("ServicedRequestTotalCount",10)
Press Return to quit monitoring
Monitoring started for attribute ServicedRequestTotalCount
wls:/(offline)>
>
2. wlshell 2.0 adds the option when connecting to the admin server to also connect
to all managed servers in that domain. This is a nice feature for monitoring because
you then have access to all the runtime mbeans in each managed serverYes, this indeed seems to be a very nice feature. We will consider this
for our next release.
>
3. There is not a good way to pass cmd line options(variables) to wlst. In wlshell
I can send cmd line options via -v. I have tried something similar with wlst using
-loadProperties but this is a little laborious because I do not necessarily want
to create a properties file when a passing in only one or two variables. Also
I find loadProperties lacking somewhat (see 4 below)ok, I just realised that there is indeed a bug in wlst where the command
line arguments are not being honored. In Jython one can access the
command line arguments from the sys.argv variable. For example,
java weblogic.WLST -i foo.py var1 var2 var3
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to Weblogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> print sys.argv
['foo.py', 'var1', 'var2', 'var3']
wls:/offline>
But this isn't working properly, please keep using the loadProperties
untill this has been fixed.
>
4) loadProperties treats all created variables as strings. While this is understandable
from the perspective that getProperty returns a string, it would be nice if wlst
was smart enough that when a property is numbers only its an int, otherwise a
string etc.
wlshell does this logic/conversion for you which really simplifies calling methods
that expect the particular datatype. To get around this problem you can create a script file say,
variables.py which would look like,
# variables that will be used
theInterpreter.set('var1',10)
theInterpreter.set('var2','i am a string')
java weblogic.WLST variables.py
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to Weblogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/(offline)> print var1
10
wls:/(offline)> print var2
'i am a string'
>
5. I'd like to be able to send cmd output etc to a file while running within wlst.
In wlshell its a simple as adding >> filename to the end of the command. In wlst it is not as simple as doing >>, it is more than that. You can
choose any output stream to direct your output to. In your case you can
create a FileOutputStream and route the output to this stream for any
particular command.
Example,
# create a file output stream say fos
from java.io import FileOutputStream
fos = FileOutputStream("output.txt")
# save the default output stream to a variable to
# switch it back
sys.stdout=fos
# Now all output for any function will go to output.txt
ls()
cd('foo')
# after done with your functions switch it back
sys.stdout=origOutput
This is the right Jython way to do it. This works for all output streams
, very useful when you embed an interpreter in a servlet and would like
to display the output via a PrintStream etc.
>
>
All in all wlst is a nice tool. Personally if the above features were added it
would be much easier to transistion to wlst for good.
Also I really like the wlst offline tool. Its nice to be able to do the whole
create and configure domain process with one tool. Will this be supported. Yes indeed. We are working on merging both the tools into one.
I do
not want to rely on it too much if it will not work in future weblogic versions.It will be supported in future release of weblogic.
Thanks,
-satya
>
Thanks,
Darryl
"Steve Hess" <[email protected]> wrote:
Hello,
I am the BEA Product Manager behind WLST.
WLST, as it appears today on dev2dev, is an early release version of
a tool that
BEA does intend to support as part of our next major release. We decided
to issue
early versions of the tool because of the demand for a supported scripting
solution,
and to generate feedback from our user community. I encourage you to
work with
WLST, and assure you that this tool represents our current direction
in management
scripting.
Also note, this newsgroup can be used to issue questions, concerns and
feedback
about WLST. The engineering and PM team will monitor this group and
respond to
your questions as quickly as we can. While we will not be able to respond
to
every feature request, we really value your suggestions, and will endeavor
to
improve the tool in ways that meet your real-world needs.
Cheers,
Steve Hess
Director, WLS PM
"George Lupanoff" <[email protected]> wrote:
Has anyone tried using the new WebLogic Scripting Tool (WLST) that was
recently
posted on the dev2dev WebLogic Utilities site: http://dev2dev.bea.com/resourcelibrary/utilitiestools/adminmgmt.jsp
It looks to be a handy tool that is built upon jython and enables you
to easily
navigate, inspect and manipulate the WebLogic MBean tree on a running
server.
It also has a nice scripting tool which allows you to convert a config.xml
file
into a script that can be run to recreate a domain or specific resources
within
the domain. This is exactly something I have been looking for because
we occasionally
recreate domains or subsets of a domain for testing and POC purposes.
The utility is fairly well documented and works well for the most part.
The only
issue I have run into so far is that is does not seem to understandJMS
Distributed
Destinations. When I try to convert a config.xml that contains a DDto
a script
it throws a null pointer exception. I have not tried a cluster yet.
I noticed the utility was authored by someone at BEA. Is there potential
that
BEA will support this in the future if it catches on? Has anyone had
experience
with WLST or jython that would cause you to reccomend (or not) using
it?
Thanks. -
Welcome to the Adobe InContext Editing Forum!
Welcome to the Adobe InContext Editing forum. This is a place
to get help with InContext Editing, post questions to other users,
and share your impressions and feedback with the team at Adobe.
We’ll be checking in as often as possible to provide answers
to your questions and point you in the right direction.
Be sure to check the
Frequently
Asked Questions (FAQ) page as well as previous topics on the
forums. The FAQ will be updated regularly with new information, so
that should be your first stop when you have an InContext Editing
question. If you’re just getting started with InContext
Editing, be sure to check out the product tutorials in the
Developer
Center.
Your comments and suggestions will help us shape the future
of this service, so we’re looking forward from hearing your
thoughts!
‐ The InContext Editing TeamCAN ANYONE HELP PLEASE
1. CTRL E has never worked and I have always edited my site via a link that my web designer has given me ,I don't get an error message just nothing happens, any ideas?
2. When I go through the link given to me by my web designer to edit the site the site appears but everything is smaller, font boxes etc, and not the correct size, I can edit ,however when I then exit editing and check to see if my site has changed nothing has .
Viewing the site outside of incontext editing all is normal, correct size etc , it is only when I'm in editing that the site appears different and not right.This is a recent problem and all ( apart from CTRL E ) has been fine.
Its almost like I have 2 websites one out here and one in incontext editing , any suggestions
Many thanks
Rik -
Welcome to the Organizational Change Management Forum!
This forum is associated with the Welcome and Rules of Engagement posted in the SDN threads.
If you are new to our forums, have a look at this <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/collaborationareas/collaborationfaq">Forum FAQ</a>.
Don't forget to reward one another for support, contribution, and good content.
cheers,
Marilyn PrattOn 19/01/2012 18:00, Novell wrote:
> Welcome to the Kanaka for Mac forum. See the press release:
>
> http://www.novell.com/news/press/201...available.html
"Novell Kanaka for Mac is available to Open Enterprise Server customers
with a current maintenance license and can be downloaded through the
Novell Customer Center at http://www.novell.com/center."
To find your Kanaka download click My Products then Novell Open
Enterprise Server.
> Thanks for adding your experiences, knowledge, and questions here in the
> forums.
Documentation is available at http://www.novell.com/documentation/kanaka/
A video with an overview of the product is also available at
http://www.novell.com/communities/no...lient-solution
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details. -
Welcome to the Mars General Discussion Forum
Welcome to the Mars General Discussion forum. Please use this
forum to discuss Mars and supporting content on Adobe Labs.for a second i thought about the planet... heheheh
"Nancy - Adobe Comm. Expert" <[email protected]>
escreveu na mensagem
news:ehnm89$949$[email protected]..
> Thanks, Andres! I missed it somehow! :)
> Nancy
>
> "Andres Cayon" <[email protected]> wrote in
message
> news:ehn94t$naf$[email protected]..
>>
http://labs.adobe.com/wiki/index.php/Mars
>> 8-)
>> --
>> Andres Cayon
>>
http://www.dwug.es
>> ---------------------------------------
>> "Nancy - Adobe Comm. Expert"
<[email protected]> escribió en el mensaje
>> news:ehmo1n$3o3$[email protected]..
>>> Okay .. I'll bite. I've been to Labs and seen
the mobile authoring link
>>> and the Flex 2 for Mac link .. what is Mars?
>>>
>>> Nancy Gill
>>> Adobe Comm. Expert for Dreamweaver
>>>
>>> "Daniel T" <[email protected]>
wrote in message
>>> news:ehmcsk$lb1$[email protected]..
>>>> Welcome to the Mars General Discussion
forum. Please use this forum to
>>>> discuss Mars and supporting content on Adobe
Labs.
>>>
>>>
>>
>>
>
> -
Welcome to the Sun Update Connection forum.
Welcome to the Sun Update Connection forum. Sun Update Connection services lets you analyze and update your systems and stay up to date from anywhere-while providing easy access to patches and software updates. The Sun Update Connection, System Edition incorporates a number of exciting features. These features* include access to all Solaris 10 software updates (security fixes, device drivers, recommended updates and feature updates) through the following update mechanisms:
� Sun[sm] Update Manager � A client-side application with a graphical user interface (GUI) and command-line interface (CLI) for locally managing updates on your system
� Sun[sm] Update Connection - Sun-hosted Web application for remotely managing updates on one or more of your systems
� Update Connection Proxy - A local caching proxy server which serves updates from Sun to the client systems that are inside your enterprise security domain. (requires use of Sun Update Manager.)
� SunSolve Patch & Updates Portal - A venue for downloading patches and obtaining patch readme's
For more information about these tools, please see the following documentation:
- Sun Update Manager 1.0 Administration Guide
- Sun Update Connection 1.0 Administration Guide
- smpatch(1M) man page
- patchsvr(1M) man page
- Sun Update Connection, System Edition 1.0 Preview
Release: Installation Guide and Release Notes
* Please note that in the future, some features will require a valid Sun Service Plan. Please see the "Get Started" Page for more information.
http://www.sun.com/updateconnection/getstarted
You can also access a Frequently Asked Questions (FAQ) document from the Sun Update Connection services web application by clicking Help or directly at
http://www.sun.com/service/sunupdate/faq.html
And of course, you can post questions here on the Sun Update Connection forum and we will do our best to respond.
Happy updating,
Sun Update Connection Offering Team.
-
Welcome to the Call of Duty Forums!
Welcome to the Call of Duty Forum!
This is the place to discuss any Call of Duty title from Call of Duty: Finest Hour right back in the PS2 era, right up to Call of Duty: Ghosts!
As usual, please adhere to the house rules and enjoy!
Call of Duty: Modern Warfare II
Platform:
PlayStation 3
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Black Ops
Platform:
PlayStation 3
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Modern Warfare 3
Platform:
PlayStation 3
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Black Ops II
Platform:
PlayStation 3
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Black Ops Declassified
Platform:
PlayStation Vita
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Advanced Warfare
Platform:
PlayStation 3/PlayStation 4
Screenshot:
Handy Links:
Information Page
Get the Full Game (PS3 Gold Edition)
Get the Full Game (PS4 Gold Edition)
Get the Season Pass (PS3/PS4)
Call of Duty: Ghosts
Platform:
PlayStation 3/PlayStation 4
Screenshot:
Handy Links:
Information Page
Get the Full Game (PS3)
Get the Full Game (PS4)
Get the Season Pass (PS4)
Call of Duty: Black Ops III
Platform:
PlayStation 4
Release Date:
06/11/2015
Screenshot:
Handy Links:
Pre-Order
Threads you should check out..
Multiplayer - So, what do you think? - by Yaster
Same here!
Maybe you are looking for
-
No picture w/ mini dvi adapter
ok. So, I have an Apple mini dvi to video adapter. I use it all the time on my tv's using both composite and s-video (s video on my HD flat screen, and composite on m cheaper tv.) Everything works great. no problems. Until I go to my girlfriend's hou
-
Hello i have a audigy 4 pro the problem i am having is i cannt get it to pwer up. I have tryed useing a brand new remote with new battery to turn it on but note happens. The blue light stays on and that it.
-
How do i change my wallpaper to black?
How do i change my wallpaper to black like it shows on some of the boxes ive seen before?
-
Little problem using JSP technology and editing long text with CR/LF inside. I've got a form containing a TEXTAREA in witch you can enter text and, of course, CR/LF. I can submit the form and record the text correctly in the database. If I call the c
-
Is it possible to create Thread for Swing Components or for JApplet?
Can i create a Thread by extending Thread class or implementing Runnable interface for Swing Components? Can i create a Thread by extending Thread class or implementing Runnable interface with JApplet? thanks