Welcome to the NI VeriStand Discussion Forum

Welcome to the National Instruments NI VeriStand discussion forum. This group is intended to provide a discussion forum for developers and engineers
using National Instruments NI VeriStand. Through the ni.com support site, this forum and other online tools, you have the opportunity to obtain
information and examples about NI VeriStand and to ask question to help you in creating Real-Time test applications using NI VeriStand.
In addition to answering current questions it provides a mechanism for recording this information and allowing new developers to browse the history
of the group for information that has already been discussed.
While this is not a direct support channel administrated by the NI Applications Engineering group, it gives you the tools to help and support each other (with some assistance from NI Applications Engineers if needed). You may also use this forum to provide feedback and information to NI about the needs for support and for new features.
Regards,
Angela M
Product Support Engineer

Hello Ravens Fan,
I would definitely encourage you and others interested to check out ni.com/veristand which has some more detailed explanation, as this software does many things that are difficult to cover in a short post.
NI VeriStand is a software which helps users to configure and run a Real-Time test application. This includes Hardware-in-the-Loop testing and model based control in a more configuration based environment than if you were to program this directly, in LabVIEW for instance. It has many built in features to control timing, data communication, setup your Real-Time target configuration and more. It is a standalone application, but has many ways to be customized to extend the software capabilities.
The Getting Started with NI VeriStand page has some demonstration videos which are a great way to get some more insight into this product.
I hope this helps, feel free to try it out as that really is the best way to better understand the software.
Regards,
Angela M

Similar Messages

Welcome to the Mars General Discussion Forum

Welcome to the Mars General Discussion forum. Please use this
forum to discuss Mars and supporting content on Adobe Labs.

for a second i thought about the planet... heheheh
"Nancy - Adobe Comm. Expert" <[email protected]>
escreveu na mensagem
news:ehnm89$949$[email protected]..
> Thanks, Andres! I missed it somehow! :)
> Nancy
>
> "Andres Cayon" <[email protected]> wrote in
message
> news:ehn94t$naf$[email protected]..
>>
http://labs.adobe.com/wiki/index.php/Mars
>> 8-)
>> --
>> Andres Cayon
>>
http://www.dwug.es
>> ---------------------------------------
>> "Nancy - Adobe Comm. Expert"
<[email protected]> escribió en el mensaje
>> news:ehmo1n$3o3$[email protected]..
>>> Okay .. I'll bite. I've been to Labs and seen
the mobile authoring link
>>> and the Flex 2 for Mac link .. what is Mars?
>>>
>>> Nancy Gill
>>> Adobe Comm. Expert for Dreamweaver
>>>
>>> "Daniel T" <[email protected]>
wrote in message
>>> news:ehmcsk$lb1$[email protected]..
>>>> Welcome to the Mars General Discussion
forum. Please use this forum to
>>>> discuss Mars and supporting content on Adobe
Labs.
>>>
>>>
>>
>>
>
>

Welcome to the VirtualBench discussion forum!

Welcome to the VirtualBench discussion forum. This is a great place to ask questions and find answers on this new all-in-one, software based instrument. Please see the product support page for technical resources.
Katie Collette
National Instruments

Debrosse wrote:
Question...I'm having a hard time finding the iOS app in the app store. When i search Virtual Bench, nothing comes up. Is there an alternative link to get to the app?
The iOS app is not yet available, but you can request to be notified when it is published in the app store.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

Welcome to the LabVIEW Communications Discussion Forum!

All,
Welcome to the discussion forum for LabVIEW Communications System Design Suite! This is an open forum for users of LabVIEW Communications to share their product related questions and knowledge with each other. Like our other NI discussion forums, NI engineers will be active in helping to resolve questions and provide feedback.
For getting started materials, tutorials and example code, try visiting the SDR Community.
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

You are still posting in the wrong forum and in an unrelated thread. This forum here is about software defined radio (SDR).
LabVIEW Champion . Do more with less code and in less time .

Welcome to the New NI Discussion Forums!

We are excited to present the NEW and IMPROVED NI Discussion Forums to you, our valued community members!
The community not only had a face-lift, it now offers a full set of advanced personalization features and it is available in seven languages!
Here are some tips to help you get around the new system:
What do the boxes next to the user names mean?
This is the new user ranking system. The three boxes represent the user’s score in the three performance metrics: ratings, posts, and logins. The darker the box is shaded, the higher the user has scored in that performance metric.
The box on the left is the average message rating the user has received.
The box in the center is the total number of posts the user has contributed to the community.
The box on the right is the number of times the user has logged into the community.
The blue boxes designate the user is an NI Employee while the gold boxes are reserved for NI Partners and customers.
How do I find a thread from the old system in the new system?
If you have the title of the thread, we recommend searching for it using the search bar at the top or bottom of the page.
If you do not have the title of thread or cannot find it with search, but you know that you posted to the thread, we recommend that you login and click on your Alias at the top of the page to view your profile. From your profile page, click on the Find All Posts by this User link and scroll through the results to find the thread.
If you do not have the title of the thread and you didn’t post to it, but you know the Alias of someone else who did post to the thread, conduct a User search to find that user. Click on their Alias to view their profile page and then use the Find All Posts by this User link to find the thread.
If you do not have the title of the thread and you don’t know the Alias of any user who posted to it, we recommend browsing the board that you believe it would be in until you find it.
How do I personalize the forums?
Once you login, click on the My Profile link at the top of the page. From the tabs on this page, you can modify your time zone, ratings preference, font size, emoticon style, etc to personalize your experience. As long as you remember to Save Changes before you leave the tabs, your forum will be personalized for you each time you login.
What languages are supported?
The user interface is translated into the following languages:
Chinese (Simplified)
Chinese (Traditional)
English
French
Korean
Japanese
Spanish
Note: The language in the My Preferences tab in the forums only controls the language for that session. As soon as you logout and login again, your language will be reset to the language that you have configured in your NI User Profile. To modify the language configured in your NI User Profile, visit www.ni.com/profile.
What was migrated?
Questions
Answers
Comments
Average Ratings per Answer
Attachments
Alias
Number of Questions Posted (Total Started Threads)
Number of Answers & Comments Posted (Total Replies)
Average Ratings Received per User
Board Subscriptions
What was NOT migrated?
Topics
Opinions
Replies
Polls
Average Ratings Given
Message Subscriptions
Keywords associated with Board Subscriptions
Enthusiast Subscriptions
Enthusiast Biographies
What does Float mean?
You can choose to pin boards or threads to the top of the lists so that when you are logged in they are the first things you see. To do this, click on the up arrow to the right of the board or message you want to Float to the top of your lists. When you no longer want this message or board at the top of your lists, you can click the arrow again to UnFloat the board or message.
Why are there smiley faces in the sample code pieces?
There are times when the pieces of code include the same characters that are used to create an emoticon in the forums. To disable emoticons so that you can see the code correctly, follow these steps:
Sign In or Register to the forums if you are not already logged in
Click My Profile in the User Bar at the top of the page
Click My Preferences to view the My Preferences tab
Change the Emoticon Type to None in the My Preferences tab in your Profile
Click Save Changes
Now when you browse to the thread, the code should be displayed correctly.
Emoticons will no longer be displayed in any messages you view in the forums until you change the Emoticon Type back to one of the other types.
If you have additional questions or feedback about the upgrade, refer to the Help or post to the Feedback on NI Discussion Forums board.
Molly K
Web Support Manager
National InstrumentsMessage Edited by Support on 11-20-2004 06:14 AM
Molly K.
Web Support & Operations Manager
National Instruments

Just a couple of comments:
1. In the CVI forum, I couldn't post a message which included the C #include syntax with angle brackets. It interpreted the angle brakcets as HTML, gave me an HTML syntax error, and deleted the angle brackets as well as the .h file they enclosed. There may be a way in HTML to escape the angle brakcets so they can be included as text rather than interpreted as HTML, but I shouldn't have to do that in a C forum.
2. When I got the HTML error message above, it also deleted the file I had attached so when I posted the message, there was no attachment.
3. I don't get automatic hyperlinks in any posts I read or create. The text of the URL is there, but I can't just click to link to the new page. Am I missing some option?
4. Older but updated messages don't come to the top. I like to see new activity even if I'm not subscribed to that thread.
5. When reviewing the list of messages in the forums, I'd like to see the ratings of the author and of the reply (even before opening the message). In the old forums, the messages where tagged "Answered by Enthusiast" and/or "High rating".
6. I'd like to see the buttons to rate an answer even if I'm not logged. If I try to rate an answer when I'm not logged on, it could prompt me to log on first. If the rating buttons are only available if you're logged on, I think the number of ratings will be drastically reduced.
7. I miss the list of top contributors (formerly known as Enthusiasts). I think it was a good way to foster community and to get to know active members. It also generated some friendly competition to see who had more posts and who had higher ratings.
8. I liked the old organization with two sections to show the newest answered questions separate from the newest unanswered questions.
9. Some of the new search options are good additions. I'd like to combine the user search and the message search. For example, I might like to search for any message from Bilal on DLLs.
10. I had to make this a Top 10 list. I'm impressed by the amount of work that went into the new forums. Keep it up!

Welcome to the Novell File Reporter Forum

Welcome to the new Novell File Reporter forum. You can find information
about this product here: http://www.novell.com/products/file-reporter/
This forum is for discussions about this product.

On 19/01/2012 18:00, Novell wrote:
> Welcome to the Kanaka for Mac forum. See the press release:
>
> http://www.novell.com/news/press/201...available.html
"Novell Kanaka for Mac is available to Open Enterprise Server customers
with a current maintenance license and can be downloaded through the
Novell Customer Center at http://www.novell.com/center."
To find your Kanaka download click My Products then Novell Open
Enterprise Server.
> Thanks for adding your experiences, knowledge, and questions here in the
> forums.
Documentation is available at http://www.novell.com/documentation/kanaka/
A video with an overview of the product is also available at
http://www.novell.com/communities/no...lient-solution
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Welcome to the Call of Duty Forums!

Welcome to the Call of Duty Forum!
This is the place to discuss any Call of Duty title from Call of Duty: Finest Hour right back in the PS2 era, right up to Call of Duty: Ghosts!
As usual, please adhere to the house rules and enjoy!
Call of Duty: Modern Warfare II
Platform:
PlayStation 3
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Black Ops
Platform:
PlayStation 3
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Modern Warfare 3
Platform:
PlayStation 3
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Black Ops II
Platform:
PlayStation 3
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Black Ops Declassified
Platform:
PlayStation Vita
Screenshot:
Handy Links:
Information Page
Get the Full Game
Call of Duty: Advanced Warfare
Platform:
PlayStation 3/PlayStation 4
Screenshot:
Handy Links:
Information Page
Get the Full Game (PS3 Gold Edition)
Get the Full Game (PS4 Gold Edition)
Get the Season Pass (PS3/PS4)
Call of Duty: Ghosts
Platform:
PlayStation 3/PlayStation 4
Screenshot:
Handy Links:
Information Page
Get the Full Game (PS3)
Get the Full Game (PS4)
Get the Season Pass (PS4)
Call of Duty: Black Ops III
Platform:
PlayStation 4
Release Date:
06/11/2015
Screenshot:
Handy Links:
Pre-Order
Threads you should check out..
Multiplayer - So, what do you think? - by Yaster

Same here!

Welcome to the Kanaka for Mac Forum

Welcome to the Kanaka for Mac forum. See the press release:
http://www.novell.com/news/press/201...available.html
Thanks for adding your experiences, knowledge, and questions here in the
forums.

On 19/01/2012 18:00, Novell wrote:
> Welcome to the Kanaka for Mac forum. See the press release:
>
> http://www.novell.com/news/press/201...available.html
"Novell Kanaka for Mac is available to Open Enterprise Server customers
with a current maintenance license and can be downloaded through the
Novell Customer Center at http://www.novell.com/center."
To find your Kanaka download click My Products then Novell Open
Enterprise Server.
> Thanks for adding your experiences, knowledge, and questions here in the
> forums.
Documentation is available at http://www.novell.com/documentation/kanaka/
A video with an overview of the product is also available at
http://www.novell.com/communities/no...lient-solution
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Welcome to the Windows 7 discussion board. Please read before posting.

Welcome to the Windows 7 discussion board.
As above, this is a new discussion board created solely for Windows 7. I am sure many of you would be eagerly anticipating the launch on Oct 22nd. Some of you may already have questions about using existing Creative products on this operating system.
Here are some of the Knowledge Base articles & links that you might find useful:
Windows 7 Introduction
Windows 7 FAQ
Windows 7 - Driver Availability Chart
Microsoft Windows 7 website
Microsoft Technet
Microsoft Developer Network

I can understand your point of view and I respect it in regards to Small Basic being a learning language. None the less, let me make a suggestion that would be more ageeable, I think, to different kinds of people. Why not make different versions
of this new language: version 1 for beginners that I heard would be out by the end of this year,
version 2 for intermediates and version 3 for more advanced programmers. All this would culminate to the Visual Basic language. These 3 versions would smoothe out the gap between SB and Visual Basic. Your new programmers would
evolve at the same time your versions would come out and Microsoft would have a long term policy of loyal programmers.

Welcome to the Adobe InContext Editing Forum!

Welcome to the Adobe InContext Editing forum. This is a place
to get help with InContext Editing, post questions to other users,
and share your impressions and feedback with the team at Adobe.
We’ll be checking in as often as possible to provide answers
to your questions and point you in the right direction.
Be sure to check the
Frequently
Asked Questions (FAQ) page as well as previous topics on the
forums. The FAQ will be updated regularly with new information, so
that should be your first stop when you have an InContext Editing
question. If you’re just getting started with InContext
Editing, be sure to check out the product tutorials in the
Developer
Center.
Your comments and suggestions will help us shape the future
of this service, so we’re looking forward from hearing your
thoughts!
‐ The InContext Editing Team

CAN ANYONE HELP PLEASE
1. CTRL E has never worked and I have always edited my site via a link that my web designer has given me ,I don't get an error message just nothing happens, any ideas?
2. When I go through the link given to me by my web designer to edit the site the site appears but everything is smaller, font boxes etc, and not the correct size, I can edit ,however when I then exit editing and check to see if my site has changed nothing has .
Viewing the site outside of incontext editing all is normal, correct size etc , it is only when I'm in editing that the site appears different and not right.This is a recent problem and all ( apart from CTRL E ) has been fine.
Its almost like I have 2 websites one out here and one in incontext editing , any suggestions
Many thanks
Rik

Welcome to the Sun Update Connection forum.

Welcome to the Sun Update Connection forum. Sun Update Connection services lets you analyze and update your systems and stay up to date from anywhere-while providing easy access to patches and software updates. The Sun Update Connection, System Edition incorporates a number of exciting features. These features* include access to all Solaris 10 software updates (security fixes, device drivers, recommended updates and feature updates) through the following update mechanisms:
� Sun[sm] Update Manager � A client-side application with a graphical user interface (GUI) and command-line interface (CLI) for locally managing updates on your system
� Sun[sm] Update Connection - Sun-hosted Web application for remotely managing updates on one or more of your systems
� Update Connection Proxy - A local caching proxy server which serves updates from Sun to the client systems that are inside your enterprise security domain. (requires use of Sun Update Manager.)
� SunSolve Patch & Updates Portal - A venue for downloading patches and obtaining patch readme's
For more information about these tools, please see the following documentation:
- Sun Update Manager 1.0 Administration Guide
- Sun Update Connection 1.0 Administration Guide
- smpatch(1M) man page
- patchsvr(1M) man page
- Sun Update Connection, System Edition 1.0 Preview
Release: Installation Guide and Release Notes
* Please note that in the future, some features will require a valid Sun Service Plan. Please see the "Get Started" Page for more information.
http://www.sun.com/updateconnection/getstarted
You can also access a Frequently Asked Questions (FAQ) document from the Sun Update Connection services web application by clicking Help or directly at
http://www.sun.com/service/sunupdate/faq.html
And of course, you can post questions here on the Sun Update Connection forum and we will do our best to respond.
Happy updating,
Sun Update Connection Offering Team

.

Welcome to the Organizational Change Management Forum!

This forum is associated with the Welcome and Rules of Engagement posted in the SDN threads.
If you are new to our forums, have a look at this <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/collaborationareas/collaborationfaq">Forum FAQ</a>.
Don't forget to reward one another for support, contribution, and good content.
cheers,
Marilyn Pratt

On 19/01/2012 18:00, Novell wrote:
> Welcome to the Kanaka for Mac forum. See the press release:
>
> http://www.novell.com/news/press/201...available.html
"Novell Kanaka for Mac is available to Open Enterprise Server customers
with a current maintenance license and can be downloaded through the
Novell Customer Center at http://www.novell.com/center."
To find your Kanaka download click My Products then Novell Open
Enterprise Server.
> Thanks for adding your experiences, knowledge, and questions here in the
> forums.
Documentation is available at http://www.novell.com/documentation/kanaka/
A video with an overview of the product is also available at
http://www.novell.com/communities/no...lient-solution
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Welcome to the SAP Education & Research forum!

Welcome to the SAP Education & Research forum!
This forum is a great way for you to share your SAP knowledge or get help from SAP experts worldwide on the range of SAP Education & Research topics and products. Before you post, take a look at our [Forum Guide|http://wiki.sdn.sap.com/wiki/display/SCNGUIDE/Forums].
Please also check our [Wiki FAQ|http://wiki.sdn.sap.com/wiki/display/HER/FAQ] and use the search before you post. More detailed [rules of engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], can be found on the Wiki.
Implementation guidelines, cookbooks, etc, can be found on the [BPX page|http://www.sdn.sap.com/irj/bpx/highered] for SAP Education & Research
Happy posting!
The Community Team
Rob and Silke

I'm not sure that it is actually possible to parameterize the DYNR. Anyway, it would still leave you the problem that the field descriptors in the command interface would all be wrong.
My suggestion for getting around this is to make several recordings using the SAPGUI command, creating a new command for each screen change. You can then edit the script so that the different cases between which you want to differentiate are separated by IF...ELSEIF...ENDIF commands.
You might then have something that looks like this (pseudocode):
* SAPGUI command for common "opening part" of transaction
IF (subtype = 'LA').
*SAPGUI covering screen 2001
ELSEIF (subtype = 'LW').
* SAGPGUI covering screen 2000
ENDIF.
* SAPGUI for common "closing part" of transaction - if relevant.

Where are the Agile PLM discussion forums?

I'm looking for the Agile PLM discussion forums. I see the odd post in a variety of non-related forums, but do not see any listed that are specific to Agile PLM.

It seems there is no forum with that name or specific area.
As PLM is part of the big Apps family, we might focus in on EBS category of fourms:
https://forums.oracle.com/forums/category.jspa?categoryID=3
One of the Supply chain forums possibly, but from a quick search I'd say posts/discussions exist in {forum:id=475}.

Welcome to the Storage Networking Discussion

Welcome to the Cisco Networking Professionals Connection Emerging Technologies Forum. This conversation will provide you the opportunity to discuss issues surrounding Storage Networking. We encourage everyone to share their knowledge and start conversations on issues such as storage consolidation, disaster recovery, data replication and any other topic concerning Storage Networking.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
We encourage you to tell your fellow networking professionals about the site!
If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected]

Hi guys,
I am new to Oracle so I have 2 basic Technology&Software questions for an RFI, which I wasn't able to find answered for EBS R12:
8.1 Please list any specific hardware requirements/prerequisites your company’s product may have with regards to the application & database servers, clients/workstations…
8.2 Please list any specific software requirements/prerequisites your company’s products may have with regards to the operating system, database….
I know it is pretty basic stuff, but would appreciate any kind of information on these topics.
Thanks a lot!
Denisa

Welcome to the NI VeriStand Discussion Forum

Similar Messages

Maybe you are looking for