Welcome to the Solutions and Architectures Collaboration Community

Welcome to the Solutions and Architectures Collaboration Community. We encourage everyone to share their knowledge  and start conversations related to Collaboration Solutions and  architectures.All topics are welcome, including Collaboration  Applications, Customer Collaboration, Telepresence, Unified  Communications and solutions to solve business problems.
Remember,  just like in the workplace,  be courteous to your fellow forum  participants. Please refrain from  using disparaging or obscene language  or posting advertisements.
Cheers,
Dan Bruhn

Hi,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25  modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the ethernets ports of these modules, even with the show inventory and show module I can see tah the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

Similar Messages

  • Welcome to the Solutions and Architectures Data Center & Virtualization Community

    Welcome to the Solutions and Architectures Data Center & Virtualization Community. We encourage everyone to share their knowledge  and start conversations related to Data Center and Virtualization  Solutions and architectures.All topics are welcome, including  Servers – Unified Computing, Data Center Security, Data Center  Switching, Data Center Management and Automation, Storage Networking,  Application Networking Services and solutions to solve business  problems.
    Remember,  just like in the workplace,  be courteous to your fellow forum  participants. Please refrain from  using disparaging or obscene language  or posting advertisements.
    Cheers,
    Dan Bruhn 

    Hi,
    I have a question...
    I going to install two Nexus 7009 with three N7K-F248XP-25  modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the ethernets ports of these modules, even with the show inventory and show module I can see tah the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

  • Welcome to the Design and Architecture Community

    Welcome to the Network Infrastructure Design and Architecture Community.  We encourage everyone to share their knowledge and start conversations on design and overall network topology. All topics are welcome, including requirements and constraints of the network, tools and techniques, issues of hierarchy, leading practices, services, build strategies, architectures and solutions to solve business problems.
    Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
    Cheers,
    Dan BruhnCSC Community Manager

    been waiting to see a forum like this. This forum should amalgamate all the other areas like R&S, security, DC design, and provide more quality , proven solns and discuss problems/challenges as well. Will be following this forum regularly
    thanks dan for creating this community
    Regards Kishore

  • Welcome to Solutions and Architectures Borderless Networks Community

    Welcome to the Solutions and Architectures Borderless Networks Community.  We encourage everyone to share their knowledge and start conversations related to Borderless Solutions and architectures. All topics are welcome, including Switches, Routers, Security, Wireless, Cloud and System Management, WAN Optimization and solutions to solve business problems.
    Remember,  just like in the workplace, be courteous to your fellow forum  participants. Please refrain from using disparaging or obscene language  or posting advertisements.
    Cheers,
    Dan Bruhn       

    Hi,
    I have a question...
    I going to install two Nexus 7009 with three N7K-F248XP-25  modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the ethernets ports of these modules, even with the show inventory and show module I can see tah the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

  • New Solutions And Architectures Community

    I am pleased to announce the launch of our new Cisco Solutions and Architectures Community with sub-communities for Borderless Networks, Collaboration, Data Center & Virtualization.  We encourage everyone to share their knowledge and start conversations  related to network design and overall Cisco network topology.
    All topics are welcome, including WAN, LAN, enterprise, service provider, data center / virtualization, wireless, security, collaboration, voice & video network design architecture and solutions to solve business problems.
    The  content from our pilot Network Infrastructure “Design and Architecture”  community will be merged into the appropriate Solutions and  Architectures sub-community.
    Cheers,
    Dan

    Hi,
    I have a question...
    I going to install two Nexus 7009 with three N7K-F248XP-25  modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the ethernets ports of these modules, even with the show inventory and show module I can see tah the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

  • Welcome to the new Oracle User Group Community

    Welcome to the new Oracle User Group Community. Whether you landed here via the redirect from the previous community site - IOUC.org - or navigated here directly, welcome. This new platform brings new community features to enhance the way you connect with user group peers and with Oracle, as well as make it easier for you to find information through a more intuitive interface. We invite you to provide your feedback on the new site. Log in using your OTN Forum credentials and join the discussion here. If you do not yet have OTN Forum log in credentials, navigate to http://community.oracle.com/community, click on the "Register" link in the upper right corner of the page and create your account.
    We look forward to hearing from you.

    Hi Kashif,
    Glad you like the new Community. Communication among user group leaders works a little differently on this site than on the previous site. Rather than having communication focus around e-mail distribution lists, communication now is focused within the site itself. The intent is that this will provide users the one place to come for information, rather than having to sort through lots of e-mail threads. That doesn't mean that e-mail is completely out of the picture though. Users can opt-in to receive e-mail notifications when an individual piece of content is changed, or when content is posted to a space. Look for the "Receive email notifications" link under "Actions" to start receiving notices. To stop receiving notices, go back to the same content/space and click "Stop email notifications".
    Your Relationship Manager will be talking with you and the other leaders in your region over the next few days and weeks regarding how you and your group of leaders want to communicate.
    Best regards,
    Oracle User Group Team

  • I have a problem when you run Firefox to download a claim this tool (askToolbarInstaller-1.12.2.0.exe) What is the solution and how to prevent download scent tool.

    I have a problem when you run Firefox to download a claim this tool (askToolbarInstaller-1.12.2.0.exe) What is the solution and how to prevent download scent tool.

    i have the same exact problems too and it's starting to bother me further more...

  • Welcome to the Voice and Video over WLAN Discussion

    Welcome to the Cisco Networking Professionals Connection Wireless Forum. This conversation will provide you the opportunity to discuss issues surrounding Voice and Video over WLAN. We encourage everyone to share their knowledge and start conversations on issues such as bandwidth intensive wireless applications, and any other topic concerning Voice and Video over WLAN.
    Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
    We encourage you to tell your fellow networking professionals about the site!
    If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected]

    This is easily done with dial peer statements . The dial peer in your originating router must route the calls to the terminating router first. That would look like :
    dial-peer voice xxxxx voip ( the xxxxx is just a tag)
    destination-pattern 45... (that would route any 5-digit calls beginning with 45)
    session-target ipv4:xxx.xxx.xxx.xxx (ip address of the terminating router)
    If digitones are to be dialed after the connection is established, use the statement:
    dtmf-relay-h.245-alphanumeric
    You could also use a statement to specify the codec to be used:
    codec g711ulaw
    You would need multiple voip dial peers if the calls were going to different routers based on the dialed digits. If all calls are sent to the same terminating router, use all wild cards in the dest-pattern statement.
    At the terminating router configure pots dial peers:
    dial-peer voice xxxxx pots
    dest-pattern 45...
    port x/x (whichever port the call is to be terminated on)
    prefix 45 (this re-inserts matched digits which are stripped off by the pots dp)
    Repeat for other ports which will receive calls.
    Paul

  • ZERO Total Costs of the Solution and No Result Log after Optimiser Run

    Hi Experts
    I found that after SNP optimiser run for one variant with selected product and location, the Result Log generated & Total Costs of the Determined Solution is ZERO from OPTIMISER LOG.
    Before optimiser run, I had run consistency check /SAPAPO/CONSCHK, /SAPAPO/TSCONS & /SAPAPO/OM17.
    Also note, sale optimiser profile is used later with other set of products and location, but there Result Log and Total Costs of the Determined Solution is there in optimiser log.
    What could be the reason of this? Please suggest.
    Regards
    Pradipta Sahoo

    Hi Pradipta,
    Did you see any result from your optimizer run? Means, if you see some pln ord/purch req. , generated from the optimizer run, to meet the demand?  If yes, then it sounds like a master data issue with cost maintenance. If no, then it could be master data issue with  cost maintenance or there is no source (for example- no t-lane for those products you used in the optimizer run) to meet the demand and you have set the indicator for 'no order w/o source'.
    Anyway I would suggest to check the following-
    1. As Anand said, make sure you have maintain all the penalty cost for the product-locations where you have the demand. Also please check if the products are assigned to the lane (from Source to destination location).
    2. If you have maintained any production cost  in PPM (if used one) or storage cost in the demand location or transportation cost (in the T-lane), then make sure these all cost are way lesser than the non-delivery penalty cost.
    But yes, even if, this is the case, then optimizer should generate some non-delivery penalty cost, when demands are not fulfilled! So, it seems like there is no penalty cost.
    Did you use any optimizer cost profile or it is same as previous one?
    Please update us.
    Thanks,
    Satyajit

  • A message to Creative from the Linux and geek users commun

    Please pardon the possible misspellings/syntax errors in this post, as English is not my nati've language. I am still confident that you will grasp the essence of my message. Thank you.
    I have been following the downfall of Creative in the last few days, and all I can say is : You had it coming. I am another customer who was decei'ved by buying one of your expensi've product. I spent 450$ on your X-Fi Elite pro, only to wait endlessly for stable vista drivers, which are still unstable and crippled. Yes, I know you had problems with how Microsoft changed completely its audio API a few months before launching, but the fact is that this is stuff that can happen, and you had to allocate more budget in order to develop drivers quickly to satisfy your customers. Instead, you just ignored us. And now you're paying for it.
    It's kind of sad that your stock price is falling, but at the same time, it's about time the consumers could unite and get their revenge, and you are actually paying for laughing in our faces for so long. I have been waiting and waiting for a driver for Linux, since you would not provide stable drivers for Vista. Your website dedicated to open source drivers looks like it was coded in 995, with crappy graphics, just to show us that you don't care. And after waiting for over a year for drivers, you gave us a non-working driver, and you won't post any updates at all. ?
    I shell out 450$ for an X-FI Elite Pro, and you laugh into my face, not once (with sub-par drivers for Vista and a long wait), but twice with your non-working Linux drivers ? I'm disgusted.
    I wish your corporate people would understand what just happened, and listen to us, the geeky consumers, who buy, recommend, and install your products for themselves, customers, friends, and family. ? But I know that it does not work that way. Your marketing people, your legal department, your finance departement and all your corporate structure don't CARE about the end-user, but you have made a big mistake by ignoring us all these years. If you want to save your company, you really, really need to open up and develop a totally different relationship with your customer base. But knowing how this works, I'm sure that :?
    . Nobody important in the company structure will take time to read this thread, hoping it will go away, and thinking that the new product lines will make us forget all of this;
    2. You will not take this Public Relations Disaster seriously and think it will simply disapear
    Well let me tell you what's gonna happen : Don't underestimate us, your customers. We will remember what happened in the past few days, but also how you treated us in the past few years. Unless you radically change your practices, and really show good faith, you are certainly going down. I, for one, am considering selling my X-Fi Elite Pro and rely only on onboard sound because at least the drivers work on all available platforms. But if you only knew how I wished to have decent support under Linux or Vista ! But you don't even talk with us, you provide crappy drivers and then forget us !? That's not the way to treat us !? So, unless you provide more than your little PR stunt of april st, where you don't even apologize and recognize your lack of support, I will never buy any of your products again, and I will tell everybody I know to stay away from your products.
    Be aware : This is not a feeling that will go away in a few weeks/few months. I have been using Creative Cards since 996, and have always been a loyal customer, but I implore you to change, and to do it fast. I really hope you do.
    Thank you for your time. ?

    Thank you Igor, your article is very interesting indeed, and thanks for the other responses as well, it is really appreciated.
    I recently tried OSS on Linux, which offers partial support for the X-FI, but with no success. I fear that without any proper documentation provided to ALSA, the complexity of the X-Fi hardware won't allow the development of acceptable drivers for Linux anytime soon. As for Creative development for Linux, well, just go and check out their support page : http://opensource.creative.com/soundcard.html.
    It is beyond my comprehension as to why Creative simply refuses to document its hardware. I mean, I know about IP considerations and such, but the reality is that Creative has a very large part of the market for high-end audio products, and they do not have yet any serious competitors for the gaming/music enthusiast market who don't want to rely on onboard audio. (I know about M-Audio and a few others, but they mainly appeal to profesionals). So, to document their hardware for the open source community has more benefits than risks, since they don't have to pay for driver development, and since they almost sued daniel_K, I'm not afraid that their legal department would track anyone who would try to breach any IP rights by developing some hardware with the documentation they would release. So WHY ? WHY Creative, won't you release proper documentation? Why won't you help us help you ? Is it just by ideology ? That opening your code is bad ? Well, you're wrong. ?
    But it may not be too late, should you *AT LEAST* provide us communication about what's going on at Creative regarding open source. Is it that hard for a Multinational Firm to hire a few developers to develop a driver for Linux ? Why won't you put up a blog for your developer, who can talk about what they're doing, what are the limitations, the hurdles, but at least show a little transparency and stop pretending you really care. ?

  • Ask the Expert: Architecting your Collaboration Solution with Social and Video

    With Gebran Chahrouri
    Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about ways that Enterprise Social and Video are woven into traditional Voice solutions and Architectures  with Cisco expert Gebran Chahrouri. Extend your Cisco collaboration architecture to reach into Cloud and/or on premise Cisco WebEx Social and TelePresence offerings. Gebran will be answering any questions about architecting a current solution or devising a roadmap to take your collaboration deployment to the next level.
    Gebran Chahrouri is a principal engineer and architect for the WebEx Social product with a focus on scalability. Since joining Cisco in 1998 he has held engineering leadership and software management positions on products including Customer Contact, Cisco IPICS, and the Cisco TelePresence Exchange service. Chahrouri has nearly 30 years of experience in architecting, managing, and developing software products at Cisco, ROLM, IBM, Siemens, and Aspect. He holds a master's degree in electrical and computer engineering from the University of Michigan and has over 20 patents filed by the U.S. Patent Office.
    Remember to use the rating system to let Gebran  know if you have received an adequate response. 
    Gebran might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community discussion forum shortly after the event.This event lasts through February 22, 2013. Visit this forum often to view responses to your questions and the questions of other community members.

    Hi Jason,
    Thanks for your question.
    WebEx Social combines the power of social networking, content creation, and real-time communications. Employees can quickly connect with people, communities and information they need to get work done.
    The product tour video (http://www.cisco.com/en/US/prod/collateral/ps10680/vds_cQuad_prodTour.html) featured at http://www.cisco.com/web/products/quad/index.html gives a really good overview of the product.
    If you prefer a document to read I recommend http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps556/case_study_c36-706800_ps10668_Products_Case_Study.html
    I would be happy to answer any further questions.
    - Gebran

  • Welcome to the LabVIEW Communications Discussion Forum!

    All,
    Welcome to the discussion forum for LabVIEW Communications System Design Suite! This is an open forum for users of LabVIEW Communications to share their product related questions and knowledge with each other. Like our other NI discussion forums, NI engineers will be active in helping to resolve questions and provide feedback.
    For getting started materials, tutorials and example code, try visiting the SDR Community. 
    Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments

    You are still posting in the wrong forum and in an unrelated thread. This forum here is about software defined radio (SDR).
    LabVIEW Champion . Do more with less code and in less time .

  • Receiving CS0246 error after renaming solution and project.

    I am receiving this error...
    Server Error in '/RCIS.Mapping.WebApplications' Application.
    Compilation Error
    Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. 
    Compiler Error Message: CS0246: The type or namespace name 'MappingServicesWebApplications' could not be found (are you missing a using directive or an assembly reference?)
    Source Error:
    Line 26: using System.Web.Optimization;
    Line 27: using System.Web.Routing;
    Line 28: using MappingServicesWebApplications;
    Line 29:
    Line 30:
    Source File: c:\Windows\Microsoft.NET\Framework64\v4.0.30319\Temporary ASP.NET Files\rcis.mapping.webapplications\4e36dc23\d07c1fd0\App_Web_index.cshtml.a8d08dba.0ryezucn.0.cs    Line: 28 
    Show Detailed Compiler Output:
    Show Complete Compilation Source:
    Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.34237
     after renaming the Solution and project from "MappingServicesWebApplications" to "RCIS.Mapping.WebApplications"
    I've searched the entire solution and can not find the text "MappingServicesWebApplications"
    anywhere...the solution builds fine, this is only happening at runtime...I'm not sure where to look for what is generating this text?

    Hi T junky,
    Glad to see this issue has been resolved and thank you for sharing your solutions here.It will be very beneficial for other community members who
    have similar questions.
    Have a nice day,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The project file ' ' has been renamed or is no longer in the solution.

    Hello Folks:
       Developing on Win 8.1 Pro, Visual Studio 2010 Pro, C++.
       I'm revisiting a project I haven't touched in over 2 years. 
       Attempts to build result in a pop up displaying this error:
          The project file ' ' has been renamed or is no longer in the solution.
       And the build terminates. 
       Things might have changed in the underlying static libraries used by other projects. 
          I've looked through the Solution Explorer and the project's properties "Framework and References" window but I don't see anything with such an odd name. 
       How do I resolve this problem?
          Thanks
          Larry

    Some other things to try:
    1. Reload each project in the solution (Right-click/Unload Project; Right-click/Reload project).  See if any of them has an issue reloading.
    2. If you have multiple projects in the solution: Make a copy of the solution and load the copy.  Go in Build Dependencies and uncheck all.  Now build each project individually and see which one has the problem.  (Some of them might not link
    due to missing libraries, but that's OK.  You just want to see that the build starts).  Double-check which configuration Visual Studio picks when it builds each project; if they are not all the same, the problem is with the project configurations.
    3. Load the solution file with the XML editor.  (Make sure no other Visual Studio instance has the solution open when you do this).  Check each Project line for oddities, specifically, empty or mangled names, or missing project files.  Also
    check the Configurations.  It could be that the problem project doesn't have an equivalent configuration to the one you are building.  Sometimes the configuration definitions in the solution file get messed up.

  • Getting the Username and password Of Enterprise Portal in WebDynPro

    Hi Friends,
              I have developed one webdynpro application to read the excel sheet from KM Repository. i have used URL to open the connection to that excel file and to get the Inputstream.
              While opening the connection to the excel, I've hardcoded the username and password. I need to get the username and password of the user who login into the Enterprise portal and runs that application. then  i need to pass that username and password along with URL of the Excel sheet.
              Could you people find the solution and replied to me. I am waiting for your bright answer.
    Thanks and Regards,
    Sandeep Kumar Bonam.

    A very standard question in this forum.
    Refer this :
    Re: How to get User Id in Web dynpro application
    Regards,
    Subramanian V.

Maybe you are looking for