Welcoming Teen Grid Organizations to the Main Grid
Seems you are not aware of or ignoring some details.13-15 years: are NOT able to 'visit' the grid. They are NOT able so 'see' regular gid-sims. They're restricted to specific sims, assigned by the educators. They are NOT able to see search results neither in world not at marketplace.16-17 years: can connect to the regular grid, but are limited to PG sims, not able to see mature sims, even if these are adjacent.So it's very unlikely 16-17 year olds will visit your private mature place (at least the teens with proper age-info - the others (age-cheaters) are already talking on mature places.).And it will be quite impossible that you meet 13-15 agers - you have no access to their edu-sims, they have none to the grid.
It has been several weeks since we announced that Teen Second Life, our Second Life grid for 13- to 17-year-olds, will be closing at the end of this year, and that we would be admitting 16- and 17-year-olds to the main grid. Today, we are excited to tell you that we will be able to continue serving all of the educational and not-for-profit communities of the Teen Grid, including those that serve 13- to 15-year-olds, without an interruption in service.Since our announcement, we’ve been speaking with many people from the educational and not-for-profit communities in Teen Second Life to better understand their needs and determine what measures would be necessary to create a safe, secure, and collaborative environment for their students and faculty. I’m happy to say that we are able to meet these needs, and allow 13- to 15-year-olds access to limited locations on the main grid, with appropriate controls for administrators. We will implement these controls and transfer these rich and exciting projects from Teen Second Life before the end of this year.The 13- to 15-year-old students affiliated with these organizations will be unable to visit any regions except those of their hosting organization, and those accounts will not have the ability to search the Grid or to purchase items from the Marketplace. Unlike on Teen Second Life, adults that work with these students will now be a part of the broader Second Life experience, allowing them to bring rich educational content to their students. The ability to invite organization-approved guest speakers and other approved members of the community to safely interact these students will further enhance their learning experience. For more details, see the Teen Second Life transition wiki page.We are happy to provide this support for the educational community in Second Life, and we look forward to the community continuing to create innovative and exciting projects!
Similar Messages
-
Knight's Tour (works but I can't get the correct grid to print)
Hi all I have written a recursive Knight's tour method.
My trouble is when I print out the final grid it won't show the last position as being filled.
This is where I print out my grid. and it looks like this:
3 6 11 8
0 9 4 1
5 2 7 10
true
//count = number of squares in the grid = done
else if (count == (rows * cols)){
for(int i = 0; i < rows; i++){
for(int j = 0; j < cols; j++){
System.out.print(" " + grid[i][j]);
System.out.println("");
return true;
}This is the complete class
import java.util.Scanner;
public class KnightProblem{
private int [][] grid; //arrays for the grid
private int rows, cols; //size of grid
private int startx, starty; //starting loc.
private int count = 1; //keeps track of counted squares.
Scanner sc = new Scanner(System.in); //keyboard input.
//setter to get grid size, and starting loc.
public void setGrid(){
System.out.print("Enter the number of rows: ");
rows = sc.nextInt();
System.out.print("Enter the number of columns: ");
cols = sc.nextInt();
grid = new int[rows][cols];
System.out.print("Enter starting location, rows space column: ");
startx = sc.nextInt();
starty = sc.nextInt();
if(startx < 0 || startx >= rows || starty < 0 ||
starty >= cols){ //check start loc falls inside grid
System.out.println("Your starting location does not fall inside the grid" +
" please try again.");
System.exit(0);
System.out.print("Your " + rows + " by " + cols + " grid has been created, ");
System.out.print("with a starting location of " + "(" + startx + "," +
" " + starty + ")");
System.out.println();
for(int i = 0; i < rows; i++){
for(int j = 0; j < cols; j++){
grid[i][j] = 0;
//method to try and fill the grid
public boolean isFill(){
return isFill(startx, starty, count); //call recursive method.
//recursive method to fill the grid
private boolean isFill(int x, int y, int count){
//base case current loc outside grid
if (x < 0 || x >= rows || y < 0 || y >= cols){
//System.out.println("1st if " + count);
return false;
//current location already has a number
else if(grid[x][y] > 0){
return false;
//count = number of squares in the grid = done
else if (count == (rows * cols)){
for(int i = 0; i < rows; i++){
for(int j = 0; j < cols; j++){
System.out.print(" " + grid[i][j]);
System.out.println("");
return true;
else{
grid[x][y] = count; //set Count to current loc.
count++;
//if there is an empty space from one of the current neighbors then there
//is an open space from current loc.
if (isFill(x-2, y-1, count) || isFill(x-2, y+1, count) || isFill(x-1, y+2, count)
|| isFill(x+1, y+2, count) || isFill(x+2, y+1, count) || isFill(x+2, y-1, count)
|| isFill(x+1, y-2, count) || isFill(x-1, y-2, count)){
return true;
else{
grid[x][y] = 0;
return false;
} tester code
public class KnightTest{
public static void main (String[] args){
KnightProblem knight = new KnightProblem();
knight.setGrid();
System.out.println(knight.isFill());
}full output:
Enter the number of rows: 3
Enter the number of columns: 4
Enter starting location, rows space column: 1 3
Your 3 by 4 grid has been created, with a starting location of (1, 3)
3 6 11 8
0 9 4 1
5 2 7 10
true
Could anyone explain why that 0 isn't a 12?I figured it out after a little thinking!
else if (count == (rows * cols)){
grid[x][y] = count; // new code since last post.
for(int i = 0; i < rows; i++){
for(int j = 0; j < cols; j++){
System.out.print(" " + grid[i][j]);
System.out.println("");
return true;Before I wasn't giving it a chance to update the count one last time. -
why is the map not displaying correctly on "find my phone" on my computer. I am getting large grid squares on the map. I have tried deleting my history, tried zooming in & out, but the grid squares won't go away..
Welcome to Apple Support Communities
It means that it is not connected to the Internet, so it may be turned off. Another option would be that somebody has resetted it to default settings and has changed the Apple ID, being impossible to track your son's iPhone. Anyway, report it to the police because it is the only thing you can do at the moment -
Localconfig is not found out in the new grid Oracle_HOME
Hi There,
Ifollowed the metalink Note ID 736121.1 to upgrad ASM for Non-RAC from 10gr2 to 11gr2. The 11gr2 Grid installation is successful, which is on a different directory from the current ASM directory. What I did for insallation is software only installation. However, when I'm doing step 4 in the Note, localconfig is not found out in the now Grid home directory(/ora/fs0000/app/grid/11.2.0/bin). even no DBUA is found out either. I'm unable to upgrade ASM for non-RAC from 10r2 to 11gr2.
With the successful installation of 11rr2 grid, the CSS is running in 11gr2, but No DBUA is found out in the new Grid Oracle_HOME directory.
$ ps -ef | grep d.bin | grep -v grep
oracle 7751 1 0 Sep 17 ? 40:56 /ora/fs0000/app/grid/11.2.0/bin/ocssd.bin
oracle 7618 1 0 Sep 17 ? 27:32 /ora/fs0000/app/grid/11.2.0/bin/ohasd.bin reboot
$ ls -ltr /ora/fs0000/app/grid/11.2.0/bin/local*
/ora/fs0000/app/grid/11.2.0/bin/local*: No such file or directory
$ ls -ltr /ora/fs0000/app/grid/11.2.0/bin/db*
-rwxr-x--- 1 oracle dba 13790 Jan 1 2000 /ora/fs0000/app/grid/11.2.0/bin/dbstart
-rwxr-x--- 1 oracle dba 6074 Jan 1 2000 /ora/fs0000/app/grid/11.2.0/bin/dbshut
-rwxr-xr-x 1 oracle dba 2426 Jan 1 2000 /ora/fs0000/app/grid/11.2.0/bin/dbhome
-rw-r--r-- 1 oracle dba 5297 Oct 3 2006 /ora/fs0000/app/grid/11.2.0/bin/dbgeu_run_action.pl
-rwxr-x--- 1 oracle dba 666264 Nov 2 2009 /ora/fs0000/app/grid/11.2.0/bin/dbfs_client
-rwxr-x--- 1 oracle dba 0 Nov 3 2009 /ora/fs0000/app/grid/11.2.0/bin/dbvO
-rwxr-x--- 1 oracle dba 0 Nov 3 2009 /ora/fs0000/app/grid/11.2.0/bin/dbfsizeO
-rwxr-x--x 1 oracle dba 554200 Sep 17 16:00 /ora/fs0000/app/grid/11.2.0/bin/dbv
-rwxr-x--x 1 oracle dba 11680 Sep 17 16:00 /ora/fs0000/app/grid/11.2.0/bin/dbfsize
Here are the steps in Note 736121.1:
1) Install the new 11g ASM Oracle Home (on a different directory) as described in the Installation Guide associated with your specific platform :
http://www.oracle.com/pls/db111/portal.portal_db?selected=11&frame=
==)> Installation Guide for <your platform/Os>
2) Shutdown all the database instances that are using ASM as storage option.
3) Shutdown the ASM instance.
4) Reconfigure the CSS service:
Connect as root OS user and execute:
$ORACLE_HOME/bin/localconfig reset
Where: $ORACLE_HOME is the new 11g ASM Oracle Home
5) Startup the ASM instance (connected as Oracle OS user) as usual (using the 10g Oracle Home).
6) From another graphical session, set the environment variables (ORACLE_HOME, PATH, etc.) pointing to your new 11 ASM Oracle Home.
7) Then execute the DBUA from the new ASM 11gOracle_Home/bin/dbua:
DBUA will show 2 options:
=)> upgrade ASM instance.
=)> upgrade the database
8) Select [upgrade ASM instance] option. The DBUA will upgrade your ASM instance to release 11g automatically.
9) Finally, please startup the databases that are using ASM as storage option.
Does anyone has experience upgrading 10g ASM for Non-RAC to 11gR2?
Thanks in advance.
Edited by: user618594 on 20-Sep-2010 4:17 PMstrangely, i seem to have left out the word "bought" to the first sentence.
"I have bought the album Fading West by Switchfoot..." -
In previous versions, setting browser.newtab.url to about:blank disabled the newtab grid.
Now that I've updated to Firefox 18, Firefox doesn't remember the setting.
When I restart Firefox, it changes the browser.newtab.url that I had set to about:blank back to about:newtab.If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved -
Is it possible to display list alv and grid alv in the same screen
Hi
There are methods to display more than 1 alv grid in the same screen by using block append grid . In the same manner its available for more than 1 list alv report display by REUSE_ALV_BLOCK_LIST_APPEND.
My question is I want to display 1 alv list and 1 alv grid report in the same output screen .
Please let me know how to do it ? I will definetly appreciate the answers.
Thanks!!Hi Anindita,
Previously i ad told v cant display two lists together in same screen. But u can use Block ALV for this. Use FM "REUSE_ALV_BLOCK_LIST_APPEND.
In OO u can use Cl_GUI_EAST_SPLITTER_CONTAINER for displayin more than two lists in same screen.
If useful giv points
Regards
Vanitha P -
How to get the alv grid report in another screen when double click on basic
Hi.
I have created an alv report using class cl_gui_alv_grid.I got another report in the same screen,when double clicked on basic list(using double_click event).I want to get this report in another screen.What i have to do?(In classical reports i worked with sy-lsind = 1 ,but how to do here?)
How to set color to the selected rows in the alv grid report?I worked with change_data_from_inside method of cl_gui_alv_grid.But it didn't work out..
With Regards,
Ramana.On double click event . you will have to call another screen say 9000.
now within screen 900 PBO.. you will have to prepare the fieldcatalog/layout.. and the table to be displayed there.
in PAI of screen 9000, you can return to the original ALV.
method double_click.
call screen 9000.
endmethod.
" now in PBO create a module display_alv2
module display_alv2.
'prepare the fieldcat/layout info for new alv
'add the data to the new ALV table
'instantiate the grid call.. etc
'call the ALV
endmodule
"in PAI
module exit.
case sy-ucomm.
when 'ENT1'.
leave to screen 0.
endcase.
endmodule
while preparing the field catalog you can mention the EMPHASIZE field, whish will give color to tht column
E.g
*--Service Order
ls_fieldcat-tabname = 'IT_FINAL_VALID'.
ls_fieldcat-fieldname = 'AUFNR'.
ls_fieldcat-scrtext_m = 'Service Order'.
ls_fieldcat-ref_table = 'AUFK'.
ls_fieldcat-ref_field = 'AUFNR'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-outputlen = 12.
ls_fieldcat-emphasize = 'C400'. "This will add color to the cell
APPEND ls_fieldcat TO fcat_valid.
Hope this helps. -
OK I think that is resolved but I cannot pull the Data.
The Grid does not populate with data......Just keeps trying to pull it.
THE CFC FUNCTION:
<cffunction name="comments" access="remote" returntype="struct">
<cfargument name="page" required="true">
<cfargument name="pageSize" required="true">
<cfargument name="gridsortcolumn" required="true">
<cfargument name="gridsortdirection" required="true">
<cfquery name="selectAll" datasource="#dsn#" dbtype="#i#">
SELECT autoid, CONVERT(VARCHAR(10), sDate, 101) as sDATE, DAGRSN, branch,
DODAAC, clin, hours
FROM reporting.DAGRSCRAPS
</cfquery>
<cfreturn queryconvertforgrid(selectAll,page,pagesize)/>
</cffunction>
THE DATA GRID ITSELF:
<cfform name="myform" id="myformid">
<cfgrid
name = "myGrid"
format="html"
bindOnLoad="yes"
bind="cfc:pdgps.admin.backoffice.components.Data.comments({cfgridpage },{cfgridpagesize},{cfgridsortcolumn},{cfgridsortdirection})"
pageSize="10"
preservePageOnSort="true"
selectMode="single"
selectOnLoad="no"
font="Verdana"
fontsize="11"
label="True"
stripeRows="true"
stripeRowColor="##D9CCFF"
selectColor="##994FE6">
<cfgridcolumn name="autoid" display="no" >
<cfgridcolumn name="branch" header="SERVICE" type="string_noCase" >
<cfgridcolumn name="DODAAC" header="DODAAC" type="string_noCase" >
<cfgridcolumn name="DAGRSN" italic="yes" display="yes" header="DAGRSN">
<cfgridcolumn name="sDATE" display="yes" header="Date" mask="EEE DD-MMM-YY H:NN A">
<cfgridcolumn name="clin" width="35" display="yes" >
</cfgrid>
</cfform><cfargument name="gridsortdirection" required="true">
<cfset var selectAll = "">
<!--- this 'var' scopes the selectAll variable to be local to this function --->
<cfquery name="selectAll" datasource="#dsn#" dbtype="#i#">
Also, where are the 'dsn' and 'i' variables defined. They do not appear to be part of this function. Using a CFC function remotely has a great effect on what variables scopes may or may not be accessed. -
How to send the ALV GRID output to spool by using the print button in std t
How to send the ALV GRID output to spool by using the print button in standard tool bar.
We have created a button in the va02 transaction. If user click on the button the new screen will be display on that screen we are populating the alv grid output using the oops concept. But i am unable to send the output to spool using the print button in the standard tool bar.
I am able to display the Print parameter dialog box but i am not able to send it to spool.
Kindly help.
Thanks In Advance.
G.V.RamanaHi Shaik,
There is not properties button in my print screen.
MODULE user_command_0900 INPUT.
WHEN 'EXCEL'.
PERFORM excel_download.
WHEN 'PRI'.
PERFORM print_output.
form Print_output.
CALL FUNCTION 'RSPO_LIST_LAYOUT_FITS'
EXPORTING
columns = 80
device = 'ANY '
lines = 65
maxpenality = 1999
TABLES
layouts = lt_layouts1
EXCEPTIONS
unknown_device = 1
OTHERS = 2.
IF sy-subrc = 0.
LOOP AT lt_layouts1.
IF lt_layouts1-penality < 1000 AND
lt_layouts1-penality < l_min_penality.
l_layout = lt_layouts1-layout.
l_min_penality = lt_layouts1-penality.
ENDIF.
ENDLOOP.
IF NOT l_layout IS INITIAL.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
mode = 'CURRENT'
line_size = 80 "#EC *
new_list_id = l_new_list_id
no_dialog = l_no_dialog
layout = l_layout
IMPORTING
out_archive_parameters = rs_arc_params
out_parameters = rs_pri_params
valid = l_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0. " INS SLIN
ENDIF. " INS SLIN
IF rs_pri_params-linsz LT 80 OR
rs_pri_params-linsz LT gt_stack-s_lprint-width.
gt_stack-print_line_break = 'X'.
ELSE.
CLEAR gt_stack-print_line_break.
ENDIF.
IF l_valid NE 'X'.
rs_pri_params = ls_pri_params_sav.
rs_arc_params = ls_arc_params_sav.
ENDIF.
ENDIF.
ENDIF.
endform. " Print_output
CALL METHOD gv_cost_tot_alv_grand->set_table_for_first_display
EXPORTING
is_layout = gs_layout_cost_tot_grand
CHANGING
it_fieldcatalog = gt_fcat_cost_tot_grand[]
it_outtab = gt_cost_tot_grand[].
Please check my code -
Why are keywords not being shown in the Browser Grid View
Hi,
All the tutorials and manuals seem to have screenshots showing the browser grid view images with keywords at the bottom of the image. Now matter what i try i cannot get them to show up. Here are some of the things I've tried/observed.
- in the split view and viewer views the keywords show up as expected
- used the "browser metadata overlays" option (bottom right) to switch the browser between "show metadata" and "switch to basic view"
- used the "browser metadata overlays" edit option to confirm that both basic and standard overlays/views are configured to show keywords (ie. keyword is in the list on the right)
- i can see labels (red, green etc) in the browser grid view
- quit, deleted all my library preferences, restarted aperture
Are you seeing keywords in the browser view? Any ideas what i'm doing wrong?
Also note I imported my library from iPhoto.
Cheers
OliverHi i dont have primary checked heres what ive done
Hi thank youve tried editing all the basic and extended metadata options and so far i have managed to get the key words to show up on one photo at a time with a colour label.
To do this i have to go to the metadata tab on the left add a custom field to the general tab called it keywords to keep things simple lol.
This is the only way of getting my keyword to appear below the photo
However when i try and tag all the photos in the project with the same keyword and label it only tags the last one in the project ive held down cmd /option /ctrl nothing / some of these just tag one random picture with the metadata
i thank you guys in advance for your help
Craig -
Lightroom 4.4: Only 3 thumbnails will display at a time in both Grid view and the Film Strip
Hi. I have Lightroom 4.4. and Windows 7--both of which have been working fine for several months. Starting a few days ago, however, thumbnails have refused to load for any NEW photos I import. They appear gray/blank in both Grid view and the film strip. However, if you click on any of the film strip thumbnails (while in either Grid view or Develop mode), that thumbnail and corresponding image WILL load--until up to three have done so. Then they begin disappearing again, allowing you to view no more than three images' thumbnails at any one time.
I can't review a shoot via Grid mode this way. I'm also afraid to use Lightroom while it's misbehaving, for fear of corrupting the catalog somehow (though all the images appear to be there). Searching this forum, I found several people who experienced having all of their thumbnails blank out and who were able to correct this by either reinstalling or removing their color profiling software. However, 1) I did this (and it didn't work), and 2) it isn't that all my thumbnails that have disappeared. All the thumbnails and images imported prior to the bug, still initially display correctly.* And I can get three thumbnails of the newer images to appear at a time.
*The asterisk is because after I poked around some more, I realized that if I opened other folders and began post-processing images from older uploads (vs. just viewing them), the thumbnails that initially displayed correctly everywhere also blank out and begin appearing in this up-to-three-at-a-time fashion.
Help, please?
With many thanks,
RitaAlas, it didn't work. I did it twice--the second time rebooting the computer before starting Lightroom. I didn't expect the reboot to make a difference, but I did discover something else in the process: the second time I tried this, I accidentally opened a different catalog--and new photos imported just FINE into that one, thumbnails and all! For one moment I thought the reboot HAD made the difference. However, when I reopened the catalog I actually wanted, the original problem remained. Thumbnails don't load with import, and, when forced, only display up to three at a time.
So the problem seems specific to this catalog.
And yes--thank you for affirming that reinstalling Lightroom wouldn't work, either. (I forgot to mention that's what I had tried first. It didn't help--but it's nice to know it wasn't supposed to.)
Thank you so much for your reply. Do you have any other ideas, please?
With many thanks, truly,
Rita -
Error whil adding Header to the ALV grid using OO
Hi Guys,
I want to display the Header for the ALV grid using Splitter .
when i am doing like that .I am getting a screen on the top of that screen I am getting a EMPTY screen .I don't know why likat.
What i need is just to display a Grid with header?Can anybody Please help me reagarding this problem.
the Code is Below.
*& Report Z_TEST_PGM
REPORT Z_TEST_PGM NO STANDARD PAGE HEADING
LINE-SIZE 120 MESSAGE-ID zotc.
Tables : CKMLMV003 , CKMLMV001.
TYPE-POOLS: slis.
Types : Begin of t_CKMLMV003_out,
WERKS type CKMLMV003-WERKS,
MATNR type CKMLMV003-MATNR,
MISCH_VERH type CKMLMV003-MISCH_VERH,
KALNR_BAL type CKMLMV003-KALNR_BAL,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
MGTYP type CKMLMV003-MGTYP,
End of t_CKMLMV003_out,
Begin of t_CKMLMV001_out,
MATNR type CKMLMV001-MATNR,
KALNR type CKMLMV001-KALNR,
LIFNR_ND type CKMLMV001-LIFNR_ND,
EKORG_ND type CKMLMV001-EKORG_ND,
End of t_CKMLMV001_out,
Begin of t_CKMLMV003_Temp,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
End of t_CKMLMV003_Temp,
Begin of t_Final_out,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
WERKS type CKMLMV003-WERKS,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out,
Begin of t_Final_out1,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out1.
Global Structures *
Data : i_CKMLMV003_str type t_CKMLMV003_out,
i_CKMLMV001_str type t_CKMLMV001_out,
i_Final_str type t_Final_out,
i_Final_str1 type t_Final_out,
i_CKMLMV003_Temp type t_CKMLMV003_Temp.
Global Internal Tables *
Data : i_CKMLMV003_out type standard table of t_CKMLMV003_out,
i_CKMLMV001_out type standard table of t_CKMLMV001_out,
i_Final_out type standard table of t_Final_out,
i_Final_out1 type standard table of t_Final_out.
ALV Report Internal tables *
DATA : t_fieldcatalog TYPE slis_t_fieldcat_alv,
s_fieldcatalog TYPE slis_fieldcat_alv,
t_basic_fieldcatalog TYPE slis_t_fieldcat_alv,
s_basic_fieldcatalog TYPE slis_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv,
v_repid TYPE sy-repid.
*ALV Header declarations
Data: t_header type slis_t_listheader,
i_header_str type slis_listheader,
i_line_event_str TYPE slis_alv_event,
i_events TYPE slis_t_event,
wa_layout type slis_layout_alv.
Data : grid1 type ref to cl_gui_alv_grid,
g_custom_container1 type ref to cl_gui_custom_container,
grid2 type ref to cl_gui_alv_grid,
g_custom_container2 type ref to cl_gui_custom_container,
i_FCAT TYPE LVC_T_FCAT,
i_FCAT_str type lvc_s_fcat,
Structure for layout
i_layout_s TYPE lvc_s_layo,
gt_final1 type table of t_Final_out.
DATA: CCCONTAINER1 TYPE SCRFNAME VALUE 'CCCONTAINER1',
CCCONTAINER2 TYPE SCRFNAME VALUE 'CCCONTAINER2',
G_PARENT_TOP TYPE REF TO CL_GUI_CONTAINER ,
G_SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
G_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT,
G_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER.
Global Variables *
Data :cnt(4) type n value '0',
g_plant type CKMLMV003-WERKS ,
g_QuanTStr type CKMLMV003-MGTYP ,
g_PurchOrg type CKMLMV001-EKORG_ND,
flag type n value '0',
g_cnt6 type n value '0',
g_cnt7 type n value '0',
g_cnt8 type n value '0',
g_cnt9 type n value '0',
g_cnt10 type n value '0',
g_cnt11 type n value '0',
g_cnt12 type n value '0',
g_cnt13 type n value '0'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-011.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-006 for field s_matnr.
Select-Options : S_MATNR for CKMLMV003-MATNR .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-007 for field S_WERKS.
SELECT-OPTIONS:S_WERKS for CKMLMV003-WERKS Default '2003'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-008 for field S_GJAHR.
SELECT-OPTIONS:S_GJAHR for CKMLMv003-GJAHR default Sy-DATUM(4) .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-009 for field S_PERIO.
SELECT-OPTIONS:S_PERIO for CKMLMV003-PERIO .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(25) TEXT-010 for field P_MGTYP.
Parameters : P_MGTYP type CKMLMV003-MGTYP .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
At Selection-Screen on s_matnr .
Perform Validate_MatNumber.
At Selection-Screen on s_werks .
Perform Validate_CostingPlant.
At Selection-Screen on s_GJAHR .
Perform Validate_FiscalYear.
At Selection-Screen on s_PERIO .
Perform Validate_Period.
At Selection-Screen on p_MGTYP .
Perform Validate_QuantityStrType.
*& Form Validate_MatNumber
text
Form Validate_MatNumber.
DATA l_MATNR TYPE CKMLMV003-MATNR.
IF NOT S_MATNR[] IS INITIAL .
CLEAR L_MATNR.
SELECT single MATNR FROM CKMLMV003
INTO l_MATNR
WHERE MATNR = s_MATNR-LOW or MATNR = s_MATNR-HIGH.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Material Number'(001).
ENDIF.
ENDIF.
ENDFORM. "Validate_MatNumber
*& Form Validate_CostingPlant
text
Form Validate_CostingPlant.
DATA l_werks TYPE CKMLMV003-WERKS.
IF NOT S_WERKS[] IS INITIAL .
CLEAR L_WERKS.
SELECT single WERKS FROM T001W
INTO l_WERKS
WHERE WERKS = s_WERKS-low or WERKS = s_WERKS-high.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Costing Plant'(002).
ENDIF.
ENDIF.
ENDFORM. "Validate_CostingPlant
*& Form Validate_FiscalYear
text
Form Validate_FiscalYear.
DATA l_GJAHR TYPE CKMLMV003-GJAHR.
IF NOT S_GJAHR-low IS INITIAL or S_GJAHR-high IS INITIAL.
CLEAR L_GJAHR.
SELECT SINGLE GJAHR FROM CKMLMV003
INTO l_GJAHR
WHERE GJAHR LE sy-DATUM(4) .
IF NOT S_GJAHR-low LE sy-DATUM(4) or S_GJAHR-high LE sy-DATUM(4).
MESSAGE e999 WITH
'Enter a Valid Fiscal year'(003).
ENDIF.
ENDIF.
ENDFORM. "Validate_FiscalYear
*& Form Validate_Period
text
Form Validate_Period.
DATA l_PERIO TYPE CKMLMV003-PERIO.
IF NOT S_PERIO[] IS INITIAL .
CLEAR L_PERIO.
SELECT single PERIO FROM CKMLMV003
INTO l_PERIO
WHERE PERIO GE 1 and PERIO LE 12 .
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Period'(004).
ENDIF.
ENDIF.
ENDFORM. "Validate_Period
*& Form Validate_QuantityStrType
text
Form Validate_QuantityStrType.
DATA l_MGTYP TYPE CKMLMV003-MGTYP.
IF NOT p_MGTYP IS INITIAL.
CLEAR L_MGTYP.
SELECT SINGLE MGTYP FROM CKMLMV003
INTO l_MGTYP
WHERE MGTYP = p_MGTYP .
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Quantity Structure Type'(005).
ENDIF.
ENDIF.
ENDFORM. "Validate_QuantityStrType
INITIALIZATION of Fields
Class LCL_EVENT_HANDLER DEFINITION.
Public section.
Methods:
TOP_OF_PAGE for Event TOP_OF_PAGE OF CL_GUI_ALV_GRID
IMPORTING E_DYNDOC_ID.
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD TOP_OF_PAGE.
Top-of-page event <br />
PERFORM EVENT_TOP_OF_PAGE USING G_DYNDOC_ID.
ENDMETHOD. "top_of_page
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
Data : G_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Initialization.
v_repid = sy-repid.
Start-of-Selection.
Perform get_CKMLMV003.
Perform get_CKMLMV001.
Perform Get_Finaldata.
Perform Layout_FieldCatalog.
call screen '101'.
Perform ALVGrid_Final_Display.
*& Form Layout_FieldCatalog
text
Form Layout_FieldCatalog.
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-024.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'GJAHR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-012.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'PERIO'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-013.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 4.
s_fieldcatalog-fieldname = 'WERKS'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-025.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 5.
s_fieldcatalog-fieldname = 'LIFNR_ND1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-014.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 6.
s_fieldcatalog-fieldname = 'MISCH_VERH1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-015.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 7.
s_fieldcatalog-fieldname = 'LIFNR_ND2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-016.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 8.
s_fieldcatalog-fieldname = 'MISCH_VERH2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-017.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 9.
s_fieldcatalog-fieldname = 'LIFNR_ND3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-018.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 10.
s_fieldcatalog-fieldname = 'MISCH_VERH3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-019.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 11.
s_fieldcatalog-fieldname = 'LIFNR_ND4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-020.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 12.
s_fieldcatalog-fieldname = 'MISCH_VERH4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-021.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 13.
s_fieldcatalog-fieldname = 'LIFNR_ND5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'MISCH_VERH5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
if g_cnt6 <> '0'.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'LIFNR_ND6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 15.
s_fieldcatalog-fieldname = 'MISCH_VERH6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt7 <> '0'.
s_fieldcatalog-col_pos = 16.
s_fieldcatalog-fieldname = 'LIFNR_ND7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 17.
s_fieldcatalog-fieldname = 'MISCH_VERH7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt8 <> '0'.
s_fieldcatalog-col_pos = 18.
s_fieldcatalog-fieldname = 'LIFNR_ND8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 19.
s_fieldcatalog-fieldname = 'MISCH_VERH8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt9 <> '0'.
s_fieldcatalog-col_pos = 20.
s_fieldcatalog-fieldname = 'LIFNR_ND9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 21.
s_fieldcatalog-fieldname = 'MISCH_VERH9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt10 <> '0'.
s_fieldcatalog-col_pos = 22.
s_fieldcatalog-fieldname = 'LIFNR_ND10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 23.
s_fieldcatalog-fieldname = 'MISCH_VERH10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt11 <> '0'.
s_fieldcatalog-col_pos = 24.
s_fieldcatalog-fieldname = 'LIFNR_ND11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 25.
s_fieldcatalog-fieldname = 'MISCH_VERH11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt12 <> '0'.
s_fieldcatalog-col_pos = 26.
s_fieldcatalog-fieldname = 'LIFNR_ND12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 27.
s_fieldcatalog-fieldname = 'MISCH_VERH12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt13 <> '0'.
s_fieldcatalog-col_pos = 29.
s_fieldcatalog-fieldname = 'LIFNR_ND13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 30.
s_fieldcatalog-fieldname = 'MISCH_VERH13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
ENDFORM. "Layout_FieldCatalog
*& Form get_CKMLMV003
text
Form get_CKMLMV003.
Select WERKS
MATNR
MISCH_VERH
KALNR_BAL
GJAHR
PERIO
MGTYP
from CKMLMV003
into table i_CKMLMV003_out
Where ( MATNR in s_MATNR and
WERKS in s_WERKS and
GJAHR in s_GJAHR and
PERIO in s_PERIO and
MGTYP = p_MGTYP ).
Sort i_CKMLMV003_out by MATNR KALNR_BAL.
ENDFORM. "get_CKMLMV003
*& Form get_CKMLMV001
text
Form get_CKMLMV001.
If Not i_CKMLMV003_out is Initial.
Select MATNR
KALNR
LIFNR_ND
EKORG_ND
from CKMLMV001
into Table i_CKMLMV001_out
for all entries in i_CKMLMV003_out
Where ( KALNR = i_CKMLMV003_out-KALNR_BAL
and WERKS = i_CKMLMV003_out-WERKS
and MATNR = i_CKMLMV003_out-MATNR ).
sort i_CKMLMV001_out by MATNR KALNR.
ENDIF.
ENDFORM. "get_CKMLMV001
*& Form Get_Finaldata
text
Form Get_Finaldata.
Loop at i_CKMLMV001_out into i_CKMLMV001_str.
Loop at i_CKMLMV003_out into i_CKMLMV003_str.
If ( i_CKMLMV001_str-KALNR = i_CKMLMV003_str-KALNR_BAL and i_CKMLMV003_str-MATNR = i_CKMLMV001_str-MATNR ) .
If ( flag = 0 ).
g_plant = i_CKMLMV003_str-WERKS.
g_PurchOrg = i_CKMLMV001_str-EKORG_ND.
g_quantstr = i_CKMLMV003_str-MGTYP.
flag = 1.
ENDIF.
Move i_CKMLMV003_str-MATNR to i_Final_str-MATNR.
Move i_CKMLMV003_str-WERKS to i_Final_str-WERKS.
Move i_CKMLMV003_str-GJAHR to i_Final_str-GJAHR.
Move i_CKMLMV003_str-PERIO to i_Final_str-PERIO.
Move i_CKMLMV003_str-MISCH_VERH to i_Final_str-MISCH_VERH1.
Move i_CKMLMV001_str-LIFNR_ND to i_Final_str-LIFNR_ND1.
Move-Corresponding i_CKMLMV003_str to i_CKMLMV003_temp.
Append i_Final_str to i_Final_out.
Clear : i_CKMLMV003_str .
ENDIF.
ENDLOOP.
Clear : i_CKMLMV001_str , i_Final_str , i_CKMLMV003_temp.
ENDLOOP.
Sort i_Final_out by WERKS MATNR GJAHR PERIO .
Loop at i_Final_out into i_Final_str.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO and i_Final_str-WERKS = i_Final_str1-WERKS.
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
When 6.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH6.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND6.
g_cnt6 = 1.
When 7.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH7.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND7.
g_cnt7 = 1.
When 8.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH8.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND8.
g_cnt8 = 1.
When 9.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH9.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND9.
g_cnt9 = 1.
When 10.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH10.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND10.
g_cnt10 = 1.
When 11.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH11.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND11.
g_cnt11 = 1.
When 12.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH12.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND12.
g_cnt12 = 1.
When 13.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH13.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND13.
g_cnt13 = 1.
ENDCASE.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO .
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
ENDCASE.
**Move-Corresponding i_Final_str to i_Final_str1.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
ENDFORM. "Get_Finaldata
*& Form top_of_page
text
Form top_of_page.
clear t_header.
refresh t_header.
i_header_str-typ = 'H'.
I_header_Str-info = Text-035.
append I_header_str to t_header.
clear I_header_str.
Date
I_header_str-typ = 'S'.
I_header_str-key = Text-036.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO I_header_str-info. "todays date
append I_header_str to t_header.
clear: I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Quantity Structure Type :'.
I_header_Str-info = g_QuantStr.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Purchase Org :'.
I_header_Str-info = g_PurchOrg.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Plant :'.
I_header_Str-info = g_Plant.
append I_header_str to t_header.
clear I_header_str.
CLEAR i_line_event_str.
i_line_event_str-name = 'TOP_OF_PAGE'.
APPEND i_line_event_str TO i_events.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
ENDFORM. "top_of_page
*& ALVGrid_Final_Display
Form ALVGrid_Final_Display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_DEFAULt = c_valx
i_callback_top_of_page = 'TOP_OF_PAGE'
i_Save = c_valx
it_fieldcat = t_fieldcatalog
it_sort = t_sort
it_events = I_events
TABLES
t_outtab = i_final_out1.
ENDFORM. "ALVGrid_Final_Display
*& Form ALVGRID_OO_Display
text
Form ALVGRID_OO_Display.
i_FCAT_str-col_pos = 1.
i_FCAT_str-fieldname = 'MATNR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = 'MATERIAL'.
i_fcat_str-scrtext_m = Text-024.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 2.
i_FCAT_str-fieldname = 'GJAHR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-012.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 3.
i_FCAT_str-fieldname = 'PERIO'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-013.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 4.
i_FCAT_str-fieldname = 'WERKS'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-025.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 5.
i_FCAT_str-fieldname = 'LIFNR_ND1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-014.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 6.
i_FCAT_str-fieldname = 'MISCH_VERH1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-015.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 7.
i_FCAT_str-fieldname = 'LIFNR_ND2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-016.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 8.
i_FCAT_str-fieldname = 'MISCH_VERH2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-017.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 9.
i_FCAT_str-fieldname = 'LIFNR_ND3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-018.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 10.
i_FCAT_str-fieldname = 'MISCH_VERH3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-019.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 11.
i_FCAT_str-fieldname = 'LIFNR_ND4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-020.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 12.
i_FCAT_str-fieldname = 'MISCH_VERH4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-021.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 13.
i_FCAT_str-fieldname = 'LIFNR_ND5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 14.
i_FCAT_str-fieldname = 'MISCH_VERH5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
if g_cnt6 <> '0'.
i_FCAT_str-col_pos = 15.
i_FCAT_str-fieldname = 'LIFNR_ND6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 16.
i_FCAT_str-fieldname = 'MISCH_VERH6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
ENDIF.
*if not grid1 is Initial.
If sy-SUBRC = 0.
Call Method grid1->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
CALL METHOD G_DYNDOC_ID->INITIALIZE_DOCUMENT
EXPORTING
BACKGROUND_COLOR = CL_DD_AREA=>COL_TEXTAREA.
Processing events <br />
CALL METHOD GRID1->LIST_PROCESSING_EVENTS
EXPORTING
I_EVENT_NAME = 'TOP_OF_PAGE'
I_DYNDOC_ID = G_DYNDOC_ID.
Call Method grid2->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
Endform. "ALVGRID_OO_Display
Form EVENT_TOP_OF_PAGE using DG_DYNDOC_ID
TYPE REF TO CL_DD_DOCUMENT.
DATA : DL_TEXT(255) TYPE C.
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = 'Flight Details'
SAP_STYLE = CL_DD_AREA=>HEADING
SAP_FONTSIZE = CL_DD_AREA=>LARGE
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
Endform.
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
Create Object G_DYNDOC_ID
EXPORTING STYLE = 'ALV_GRID'.
if g_custom_container1 is initial .
create object g_custom_container1
Exporting
Container_name = CCCONTAINER1
Exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
Others = 5.
Create Object G_SPLITTER
Exporting PARENT = g_custom_container1.
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 1
COLUMN = 1
RECEIVING
CONTAINER = G_PARENT_TOP.
*Assigning the Part 2 to GRID
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 2
COLUMN = 1
RECEIVING
CONTAINER = g_parent_grid.Hi,
Check if any event is triggered from the event handler class, upon selection.
Usually, the events are handled on double click or on hotspot etc.
Regards,
Satish Kanteti -
How do I change the transparency grid to gray in Camera Raw 8.7.1?
I am using Scott Kelby's The Adobe Photoshop CS6 Book for Digital Photographers. He has a tutorial on Lens Correction in Camera Raw where he uses vertical tilt to correct perspective on an image taken with a 10 mm lens (Chapter 3, page 69 if that matters to anyone). The correction is extreme and after correcting, the areas where the transparency grid would show are gray in his image. On my copy of Camera Raw 8.7.1, I get the familiar checkered transparency grid (I am using the same image supplied from the books web site. He continues on with a Free Transform and Content-Aware correction to eliminate the "gray" area without explaining how the transparency section in his image got to be gray. Doing a selection on the transparency to complete the Content-Aware is not possible as described in his book. Is something I am missing with PS CC 2014? I have asked four other photographers using CS6 and CC. Two report they have the checkered grid and one has a gray area and yet another has a white area. How can I get the gray area as described in the book?
In case you are accessing this discussion by email, please be aware that I edited my last post:
In have sent a query to the Kelby web site asking for an explanation.
Great, I was going to suggest that right off the bat in my first post, but refrained from that so as not to be accused of being condescending.
I always get a gray grid for transparency in ACR, no matter what, never a solid-color gray or solid any-other color.
To be honest, I can't fathom why you would care that you get the same result.
Totally off topic: I can't stand Kelby. :-/ -
Can we show / hide the minor grid in a graph programatically?
I know how to do it statically and I know how to show / hide the major grid programatically. I am using labview 6.0.
thanksthierry_d,
This feature is not available in LabVIEW 6.0.x, but there is a minor grid color property in LabVIEW 6.1. If you really need this property, then I would suggest upgrading to LabVIEW 6.1.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask -
How to increase the alv grid size dynamically
Hi all,
I have to develop the report with the following requirement:
I have to take bwkey from t001k on basis of bukrs and bwkey. this bukrs and bwkey are entered in selection-screen.
I have to select matnr, lbkum, salk3 from mbew on basis of bwkey in selection-screen.(this is select options)
now the ouput should be as follows:
for example :
ef01 efo2 ef03
matnr lbkum salk3 lbkum salk3 lbkum salk3 total
700001 3 4 0 0 0 0 7
700010 0 0 2 1 0 0 3
The output should be as mentioned above.
In the above output,
in the first record for 700001, the total of 3 and 4 is displayed as total 7 and
for 700010 , it is displayed as 3.
the get the output as above in the alv grid,
I have taken bwkeys in t001k and remaining fields from mbew and joined them in final internal table.
now in the final table ifinal, i have the following fields,
matnr lbkum salk3 bwkey total.
now when i want to display the output, it is displaying as normal output like
mantr bwkey lbkum salk3 total
700001 etap 3 4 7
700002 etap 1 2 3
but i want to display in the first mentioned format.
so i tried to attach the bwkey values in it001k(this is internal table for t001k) for the final field catalog so that this bwkeys are displayed as column headings in the final output. but it is not displaying.
Please suggest me the solution to display the output in the above first mentioned
format as soon as possible
points will be awarded.
thanking u in advance.
A.Srinivashi ,
u can set the row count to any number , here I am setting it to 5 using the method set_visible_row_count
1 Change the visible row count to u20185u2019
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
lo_cmp_usage->create_component( ).
ENDIF.
DATA lo_interfacecontroller TYPE REF TO iwci_salv_wd_table .
lo_interfacecontroller = wd_this->wd_cpifc_alv( ).
DATA lo_value TYPE REF TO cl_salv_wd_config_table.
lo_value = lo_interfacecontroller->get_model(
lo_value->if_salv_wd_table_settings~set_visible_row_count( '5' ).
u can also go thru this useful links for CONFIGUIRING ALV :
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40794172-b95a-2910-fb98-b86d8a0918b4;jsessionid=(J2EE3417400)ID0488867050DB10849380333905377829End
SAP List Viewer (ALV) [original link is broken]
Configuring ALV
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1190424a-0801-0010-84b5-ef03fd2d33d9?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/db22242d-0701-0010-28a2-aeaa1fefd706;jsessionid=(J2EE3414800)ID0133346050DB00727847586176044227End?overridelayout=true&bcsi_scan_06B6B0A4B65849C2=0
I hope it shud solve ur query.
regards,
amit
Maybe you are looking for
-
Wierd Album Ordering With The New Artwork
With the Artwork view (the middle one of the three)... When im playing music on shuffle, when the song skips to a particular song, it moves that song up to the top of the list of the songs for that album. So instead of having the tracks sorted by Alb
-
How to change original file name?
When I rename a video, it doesn't change the title in info or the name which is shown at the top of the QuickTime window. Can I change that name?
-
Error when run the compiled code
I have code below, import java.sql.*; public class testmysql{ public static void main(String args[]){ Connection conn = null; try{ String userName = "root"; String password = "password"; String url = "jdbc:mysql://localhost:3307/ectol_
-
What is the xpath syntax to find all xml comments?
-
Filter Infotypes based on Company Code for the Message Type HRMD_A
Hi, I have a requirement to send different infotypes for different Company codes using the same distribution model for the message type HRMD_A. Example : For the BUKRS 2500 I need to send infotype 0000 ,0002,0006 For the BUKRS 2600 I need to send inf