Well all test complete, New PSU... Have to RMA
Well guys thanks for all the help, After receiving the new PSU I began all the test over again, the same things began to happen, even with the board out of the case as MSI tech support suggested. So I on my way back to Newegg to RMA the board. I decided to save a little money on the PSU and put it towards some better memory.
For all of you that helped a big !!!
and of course I'll keep you all posted!
Curious
Quote
Originally posted by curiousg
OHH P.S.
Do you think the PSU is a little overkill??
Yes it is.
Similar Messages
-
Hi all,
Im completely new to Java, and have very minimal experience in other languages.
Im starting with Java \o/
A few questions -
What other online resource sites are there?
What books are good?
What fundamental mistakes should i not make?
Any help would be appreciated.
Thanks
Markthanks all, will take a look around and im sure i will
have some fun :D
Markalso, when in doubt, come here and ask your question..be aware that people here have limited time to spend browsing the forums' threads and so a well written, specific thread subject increases your chances of getting a reply from the experienced guys around. When asking about an error, always post the code in question and include the exception message given by the java compiler..to post the code, I would recommend you use the [code] and tags, especially if it's a long listing...those tags will format your code in a readable way so that people reading can easily do so...most important thing and as people have mentionned already...have fun!!! :) -
I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
Water was accidentally poured on my computer and it was completely ruined, I lost everything I had including all of my applications.I have now purchased a new computer and would like to redownload the copy of Photoshop Elements that I purchased last year can I do this? How can I do this? And for crying out loud how do you get to talk directly to a customer service representative?
Which version of photoshop elements and operating system?
Perhaps one of these is it:
(under Downloads for older versions)
Download and Installation Help -
I just bought a new macbook pro 13-inch 6 days ago. I ran coconut battery test and it says age of the macbook is 22 weeks. It shows 4 battery load cycles and battery capacity is 96%. Is this all normal? Does anyone have same issues?
"Is this all normal?"
Yes.
"Does anyone have same issues?"
What issues?
Coconut indicates an approximate battery capacity, and 96% is excellent. During testing and run-in, the MBP is charged and discharged, and a cycle count of 4 is appropriate. -
I downloaded later version of IPad software to watch a film. I backed up on itunes. All going well until i try to restore from itunes and all it says is you have used 5 authorisations. I've tried deauthorising and it then says I have been successful and now i have 0 computers authorised. I have two apple ID's so tried both. I cant locate anywhere it says deauthorise all. i've followed all help instructions to the letter over and over again. I am going on holiday thursday and cant get anything on my IPAD other syncing with Itunes but then on computer screen says cant sync unless deauthorise one of your 5 computers. Nightmare. I've spent hours since sunday and no further forward. Anyone any clues?
Hello EricaLock
There are a few restrictions when it comes to deauthorize all option. One of them is that there has to be at least 2 accounts signed in. Another option is that you can only deauthorize all once a year. Check out the article below for more information and if you are still stuck, there is an option for further assistance with contacting the iTunes Store for support.
iTunes Store: Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
Regards,
-Norm G. -
Hi
I had my iTunes hacked recently. My account has been disabled. Changing passwords and ID I cannot upgrade all my existing apps purchased on my own pad! Help please.Did you create a completely new account or update the existing one ? If you created a new account then any
content bought/downloaded via the old one will remain tied to that old account, and it can't be copied or transferred to a new account, so you will need to get your old account re-enabled in order to download updates to its apps.
You might be able to get it re-enabled it via this page : http://iforgot.apple.com
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/
If you've changed the password on the old account but the iPad isn't recognising it, then try logging out of your account on it by tapping on your id in Settings > Store and then log back in and see if that 'refreshes' it on the iPad. -
Hello I am having problems viewing areas of a pdf...it's a form fillable pdf that someone else has completed and saved..I'm able to view all but the areas that have been filled in.. any info would help
Hi Bob, I just tried your suggestion, but the interactive PDF is in spreads by default, no way to change the setting. When I choose to view by single page in Acrobat, it displays a single spread.
When I choose to view by spreads, it displays 4 pages, two spreads. That's the topic of this whole discussion, I believe. I do own CS 6 at home, however my employer supplied me with CS 5.5. And I have very little, if any, influence on purchasing.
So, I have no good way to make an interactive PDF (with differing recto/verso headers and footers), that is accessible and shows the correct header/footer. It's either single pages (with one header/footer), or recto/verso headers/footers but PDF only as a spread, as well as I can tell.
Unless you know something else I can do...
Best, Marilyn -
I am new to Mac. How do you share an app with all users so you only have to install once?
You only have to install applications once, after which are available to all users on your Mac. But each user account will have its own individual preferences to set and may have some initialization to do the first time the application runs in each account.
Also, most applications that require entry of a license code accept the code once and apply it to all user accounts on your Mac. But there are some exceptions, some applications, that don't seem to do this (or don't do it well) and you may have to enter your license code in each user account the first time you run those applications in each account. For example, iTunes will ask you to accept the license the first time you run it in each user account. -
Dear Sir or Madam, I have got my iPhone cleaned all paid apps after I have this PC signed up for more sync PCs. How can I retrieve my paid apps accounts or I do have to buy it once more and lose my info completely?
Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases. -
I have my entire music library (purchased and burnt CD's) on my iPod Touch from one computer and I wanted to sync it all to my new computer. I was hoping it would all transfer via sync when I plugged it in but it doesn't seem to work. Please help?!
Ok, I had a glitch, forced to restart, and lost my train of thought.
Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
If you moved the itunes folder, it needs to go back.
I can't download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again. -
I just downloaded iTunes on my new PC and all the music that I have purchased through ITunes that was backed up on the cloud won't play. It is telling me I must authorize this computer before it can play pre purchased music. how do I authorize my computer to play this music?
Thank you for any assistance.Tigon's already got you covered here. But I'll chime in with some English localisation advice.
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them: -
Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please help
The remote app can either automatically find libraries available on a network (with home sharing available) or if you haven't got home sharing enabled, you can manually pair an itunes library with the remote app (using a number that is generated by the app and then typed into the itunes library).
That is why I am so confused, as it seems to be the home sharing that is the problem! -
If i restore my new iphone from my last backup will it delete all of the new content that I currently have on my phone? would it be better off to set it up as a new iphone? and if i set it up as a new iphone what will that do?
If you restore from your last backup, it will replace what you now have on your phone. If you set it up as new, you will have a phone just out of the box without any of your data on it. You can download any apps again. You can sync your music through iTunes.
-
i recently moved all of my photos from one portable drive to a new and much larger one. I use LR 5 and and all of the folders now have a ? in their folder icon. The thumbnail is there but no actual photo. How do i reconnect them?
Jim Boehme
[email protected]Duplicate post
see the answer at your earlier post LR 5
Maybe you are looking for
-
Experts I want to upload data. Please give me a sample Code for it Thanks in advance
-
Fun and Extremely Useful Project for a Script Lover
I am thinking about dabbling with PowerShell scripting because I and other business users could really use a script that intercepts commands to open .xlsx files and does the following: 1) Checks to see if an excel file of the same name is already ope
-
MacBook Pro Thunderbolt with black screen
Hi, my MacBook Pro 15" 2GHz, Core i7 with Thunderbolt, OS 10.6.7 has some problems: Sometimes I have to let run it during the night. When I wee it the next morning, it won't sleep, it is still on, but the screen stays black. Can't put it to sleep mod
-
Function Module to get the TOP N PRODUCTS
Hi Experts, Can you please let me know how can i get the top n products configured using programming? Please help. Thanks, Neeraj
-
Guys, When using the DBUA there is a component wise progress bar showing whats passed, whats in progress and whats left yet. Does anyone know what "Upgrading Oracle Server" there stand for?