Well...do I get it or not??
final cut pro x....
Medickep wrote:
I like it, but many here don't. Some of the old school ways of doing editing are gone, just like the VCR. If you're a prosumer, I would say go for it. If you're a Pro, I would put it on one machine and check it out first. It does run bad when both versions are on the same machine. Maybe they share the same system folders???
So far everything I wanted was right there, except for drop shadow, which I guess is a motion effect now. Lots are complaining about FCP X, but if you notice, they're complaining instead of learning the software!!
There aint much TO learn here. There are hardly any features.
Similar Messages
-
I get a message 'not a valid widget' when I try to add an interaction slide? Please help
Hi Guys,
I hope everyone is well.
I get a message 'not a valid widget' when I try to add an interaction slide? Can some please help me?
Many thanks,
Peter PanayiHi Rod,
I hope you are well. I can insert a widget by going into insert then selecting the widget. Thanks very much for your message.
Best regards,
Peter Panayi -
Hello, I have purchased and installed Lightroom 5 on my Mac Desktop. I travel with a MacBook Air and would like to have Lightroom 5 on this device as well. The MacBook Air does not have a CD/DVD slot. How do I get Lightroom 5 on my MacBook Air so I can use it while travelling?
Adobe - Lightroom : For Macintosh
Just download and install 5.7.1. Don't worry about earlier versions.
You'll need to enter your serial number to license the software. -
Question
(OS 10.6.8 Imac)I cannot open an adobe file on wels fargo online getting Session-1.cgi could not be open unknown error etc.. on othe browsers it works (safari,Chrome)If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem. -
I have just inherited my husbands ipad, all transferred well except my hotmail account will not set up, I have read all forums but none have helped, keep getting "can not verify" when I try set it up. I have removed email and re added, turned on off iPad and iPhone but neither will set up, I have given up and forwarded all new emails from hotmail to icloud until I sort this out. Please help it's doing my brain in!!!! Thanks
You need to turn off find my ipad in settings
Then restore to factory settings ipad will then be
as new then enter you Apple ID and password
bsydd uk -
my macbook 13 inch late 2007 model got soaked in wine I bought a pro to replace it , I want to use my hard drive froom the old one on the macbook pro and use it as an external , I already purchased the case , now the motherboard I understand gets bad but not the hard drive , right? but everything else still is in there right. ?
I got my case from owc computing
thye used a cloner last time I got the hard drive from them , but the apple had to be working. and now it's just not going to turn on wine is sticky forget about
no worries I enjoyed it for 6 years could have gone longer I have all this extra gig ram memory, and a new digital drive for ith had broke
all I want it my hard drive available at owc and make it a usb drive and acc3sss my stutt ? thansk any ideas and also on how I could sell or use the parts I can salvage, and yay my new pro ix 17 inches silver sleek full ms office i life and i work. included 389 awesome price , no need for new this does awesome . rather than buying an optical drive for 200.00 I got a new computer to me and better for a lot less.
I am gratefful , just please help on the hard drive question as external ,
thanks
just didnt want to make this sound like a sob sitiuation and also inspire others what can be done.
and I then will be able to upgrade to Snow Leopard and i life 2011.Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500 plust 250 plus 120 GB drives all of them
ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
yipeee
thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -
Hi Everyone,
I've been battling with this for a while and I'm getting nowhere. I'm attempting to install DPM 2012R2 onto a fresh VM with a local SQL installation. The setup is as follows:
Server OS: 2008R2 SP1
SQL: 2008 R2 standard with SP3(tried SP2 before this)
Collation: SQL_Latin1_General_CP1_CI_AS
Reporting services installed: Yes(ticked do not configure during the installation)
Enabled reporting servics on port 80 with the default URL
DPM Installation does not throw any errors during the preinstall stage(The server passes all the checks)
Basically, when Installing. I get this error(extract):
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
[10/12/2014 2:35:25 p.m.] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception
---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
exception ---> System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: The report definition is not valid or supported by this version of Reporting Services. This could be the result of publishing a report definition of
a later version of Reporting Services, or that the report definition contains XML that is not well-formed or the XML is not valid based on the Report Definition schema. Details: Root element is missing.
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at Microsoft.ReportingServices.WebServer.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties, Warning[]& Warnings)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Reporting.ReportingService2005.CreateReport(String Report, String Parent, Boolean Overwrite, Byte[] Definition, Property[] Properties)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateReport(String pathOfReport, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployFileInServer(Boolean recreate, ReportDBInfo rptInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.DeployReports(String sourceFolderPath, Boolean recreate, Boolean calledFromSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.InstallReports(Boolean calledFromSetup, String sourceFolderPath, String sqlServerName, String sqlInstanceName, String dbConnectionString)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.DeployReports(Boolean isRemoteReporting, String sqlMachineName, String sqlInstanceName, String rsMachineName, String rsInstanceName, String installerPath)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.DeployReports(String reportserverConfigFilePath, Boolean isOemSetup, String sqlMachineName, String sqlInstanceName, Boolean isRemoteReporting, String reportingServerMachineName, String
reportingInstanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.DeployReports(Boolean isRemoteReporting, Boolean isUpgrade)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[10/12/2014 2:35:25 p.m.] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[10/12/2014 2:35:25 p.m.] Information : Data Protection Manager installation has failed. All the items that were copied during the installation process have been removed.
For details, click the Error tab.
Any ideas?
I've managed to get it to this stage. Originally I didn't have encryption keys or a listening port(which I fixed).Can you try following steps:
If there are SSL certificates on your computer, by default SQL 2008
installation configures HTTPS for reporting websites. When DPM tries to
deploy reports on these websites it may fail if the reporting websites
are not accessible (might be due to invalid/expired certificates). To
workaround this, provided you do not require HTTPS for reporting websites do
the following:
1. Edit C:\Program Files\Microsoft DPM\SQL\MSRS10.MSDPMV3BETA1EVAL\Reporting
Services\ReportServer\rsreportserver.config
2. Set the SecureConnectionLevel to 0 if the current value is 2 (A value to
2 means secure connection is required)
3. Connect to SQL reporting service configuration manager and connect to the
instance MSDPMV3BETA1EVAL
4. Click on Web Service URL, click advanced and remove SSL identities
5. Repeat the above for Report Manager URL
6. Make sure report manager URL and web service URL are accessible with out
any errors.
6. Restart report server
If that doesn't solve the problem, please try following steps:
1. Open Start-> All programs->SQL server 2008->Configuration Tools->Report
Server Configuration Manager
2. Connect to the instance which the DPM is using to install.
3. Browse Report Manager URL and web service url
4. If report manager URL or web service url throws any error say 500 or 404
fix the error. (Try also replacing machine name with localhost in url)
5. Otherwise delete DPMReports folder (if present) using below instructions
6. Restart reporting services
7. Try DPM setup again.
Deleting DPM reports:
1. Open report manager URL in IE
2. Click show details on right hand side
3. Put a tick against DPMReports folder
4. Click Delete button.
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx -
When I drag ANY JPEG into a new folder of ANY kind, I get an alias, not an original. And, when I drag aliases onto a blank disk to burn it, I get burned aliases, NO originals. That's what I'm asking. How do you drag a JPEG and NOT get an alias?
Finder Help describes how to move, copy etc.
As well, Apple - Support - Discussions - Moving or Copying Files and ... -
i have a i phone 5 that we are getting a message not enough storage this Iphone cannot be backed up beacause there is not enough Icloud storage available. But we cannot go to settings or close out the message . i cannot power off the phone or anthing. How do i clear this off the phone.
First, press and hold the home and power buttons until the Apple icon appears.
The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available on the device. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud as well. Tap Show All Apps to get the complete list of apps and MB used for backup storage.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847` -
I'm using Logic 9 with a Macbook Pro. On one project I'm getting a message 'not enough processor power' and the computer stops playing
I've tried freezing all tracks but this has no effect. I've also bounced all soft synth tracks to audio, but to no avail. The computer stops playing
even at the start of the track where there is nothing but a kick drum happening.......Thank you for the suggestions.
I had previously tried all of the above but the airport/wireless thought. Unfortuneately, none of these things made a difference, including the wireless suggestion.
Currently, I am using my Mac's "cheapo" internal audio hardware (haha). I have a one year old 27-inch iMac, a good pair of bose speakers, and a polk sub. I don't believe it is an issue with my setup, considering I completely disconnected and unplugged it.
I did, however, do a little info hunting on the internal audio situation, since I was curious what is actually included, and I stumbled upon this interesting little tidbit about my model of iMac:
https://discussions.apple.com/thread/2718054?start=0&tstart=0
I had previously wondered if I was hearing my mouse in my speakers as well (not just in logic). It appears that this model of iMac may have some grounding issues, as someone later in the thread suggested purchasing and using a ground loop isolator, which seemed to fix any extra interference for them.
Ironically though, I have since opened logic, and do not seem to be encountering my previous static issue(yet).
Fingers crossed, hoping that I will not be experiencing it again. Going to purchase a ground loop isolator, and continue to mess around with logic, just to make sure it was not just an internal audio issue with my iMac. -
Oct 22, 2013 11:58 PM
downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........running 10.8.5 til today................???????? Can run in safe boot, but what do i do now ??? thanks
MacBook Pro, OS X Mountain Lion (10.8.3), Intel core i5 2.3GHzWell, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !! -
downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........thanx
running 10.8.5 til today........................???????? Can run in safe boot, but what do i do now ??? thanksWell, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !! -
I am doing a presentation in Keynote and can't get my presenter notes to show only on my Mac. They are showing on the screen as well as my Mac. I tried to change it under "View" but they are either totally off or totally on. What am I doing wrong?
Sounds like you have display set to "Mirror"
Apple menu > System Preferences > Displays > Display tab > deselect mirror displays -
i keep getting you do not have enough privileges when opening itunes as well as error 1201 can someone please help?
See Here for Troubleshooting
Free Disc Space
http://www.thexlab.com/faqs/freeingspace.html
See Here for Resolving Startup Issues
http://support.apple.com/kb/ts1417 -
I would estimate that this has started to happen about a month ago. I am getting "page is not found" on a multitude of sites. Some are from Yahoo, some from Facebook, and others are from various sites. It doesn't matter where the site is from- it happens to all of them. It is getting to be so annoying I am almost debating to go back to using Explorer, as much as I dislike that browser as well. Any help with this issue would be greatly appreciated.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
I get a Account not verified message. When I hit resend it never sends.
When I try to login to iCloud I get the Account not verified message. I hit the resend email prompt but never receive the email.
Make sure you are checking the email address you used to set up your iCloud account. Check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.
Maybe you are looking for
-
Trying to create a pivot in Oracle 10.2.0.4
I have the following query that pulls data from three tables, SORPCOL, SORDEGR and STVSBGI. SORPCOL houses prior college info for certain applicants for admissions, SORDEGR houses degree information, including the associated GPA at prior colleges, an
-
Nokia 2652 - How to switch off automatic answering
Hi, Does anybody know if it is possible to switch off the automatic answering a few seconds after you open up the phone to see who's calling?
-
Question: on trying to install iTunes got the following message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services. I am this computer's administrator. What should I do now?
-
Satellite P870/05P - TV Tuner cannot find channels
I have just purchased the P870/05P laptop with TV tuner. I have plugged in the antenna cable from my TV to the laptop and run up Arcsoft TV 5.0 and perform a channel scan. It doesn't find any channels at all. Can someone please provide any suggestion
-
What is a Business Process?
What is a Business Process? According to me it Depends upon client Requirements. ir Inq-Qt-Order-Del-Billing. Correct me If I am wrong.