Well, not sure if I have an issue...

I have a 3-month old MBP. Everything's great, but I have recently noticed the battery losing charge while charging. I start the machine, and the MagSafe light is green. After I open a few windows, I notice the light changes to orange/red... I also notice when charging, the remaining time may say 15 mins remaining until charged, then a few minutes later it may say 25 minutes until charged... I know batteries can lose oomph over time, but is this normal? The battery is rather new -- shows 23 cycles.
I do tend to have multiple windows/sessions open at once, connected to various servers via Citrix, etc... but that's nothing compared to some of the graphics crunching/photo editing/movie editing that many of you do on a daily basis.

I called Apple service for the similar issue before. they told me to clear SMC,PRAM and NVRAM, not very useful to me, but you can have a try.
http://support.apple.com/kb/HT1379?viewlocale=en-us
http://support.apple.com/kb/HT3964?viewlocale=en-us

Similar Messages

When i go to sing into apple id it says "We apologize but we are unable to verify your account information online". When i go to "Not sure if you have an Apple ID?" It says "We apologize but we are unable to verify your account information online"

When i go to sign into apple id it says "We apologize but we are unable to verify your account information online". When i go to "Not sure if you have an Apple ID?" It says "We apologize but we are unable to verify your account information online" When i try to sign in with my email it says "you already have an account????

Might I suggest a password reset?
Maybe you can click on the Reset Password link instead of trying to log in at appleid.apple.com.
I'm not sure if that would work, but its worth a try.
~Lt. Leviathan

I have a MacBook Air (Intel Core 2 Duo) Mac OS X 10.6.8, I would like to update to Lion, but I am not sure if I have the latest version of SNOW LEOPARD v10.6.8, do I need to update to Leopard first and then to Lion or could I just update to Lion?

I have a MacBook Air (Intel Core 2 Duo) Mac OS X 10.6.8, I would like to update to Lion but I am not sure if I need the Snow Leopard, I am not sure if I have it, or if I can just download the Lion. Please help.

Select About This Mac from the Apple menu. The dialog will display the installed version.

I have recently updated my macs software then been onto Photo Booth and realised that all of my pictures/videos have been deleted and are not in iPhoto? Im not sure where they have all gone?

PLEASE HELP
I have recently updated my macs software then been onto Photo Booth and realised that all of my pictures/videos have been deleted and are not in iPhoto? Im not sure where they have all gone?

Photobooth and iPhoto are two quite different apps with no connection between them. I'd try the Using Mac OS X forum for whatever version of the OS you have.

HT4061 i am not sure if i have backed up before updating

I am not sure if i have backed up my phone before updating. My icould is showing an update of october 2012? and itunes restore backup is not coming up? Please help,

To check if you have done a back up on iTunes go to:
Mac
iTunes>Preferences>Devices
Windows
Edit>Preferences>Devices
If you did back up your iPhone to iTunes it will show up here. In terms of iCloud sign into iCloud on the iPhone then go to storage and back up and it should shows you a back up of the iPhone IF it was backed up to iCloud. For a guide to show how to restore from a back up in any of these locations follow the link below:
http://support.apple.com/kb/ht1766
All the best

Can't update the flashplayer becasue it states I need to close firefox? Not sure why, I have an updated version of flashplayer but when I go in through firefox it tells me I need to update it, but won't because I am in firefox.

Can't update the flashplayer becasue it states I need to close firefox? Not sure why, I have an updated version of flashplayer but when I go in through firefox it tells me I need to update it, but won't because I am in firefox. This seems to be a problem when I am in FB.

You must close Firefox to install the update after it is saved to your hard drive. Follow the instructions below.
There are 2 versions of Adobe Flash. Both must be installed and updated on Windows systems. In Firefox it would show as Shockwave Flash in your plug-ins, if you had it installed.
*an ActiveX version for IE only
*a plug-in version for Firefox and most other browsers
#'''Install or Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE

HT204053 for some reason i have more than one apple id, not sure how, must have set one up ages ago and forgot about it. can i delete one, or merge them? how do i know im not going to lose info if i delete one account?

for some reason i have more than one apple id, not sure how, must have set one up ages ago and forgot about it. can i delete one, or merge them? how do i know im not going to lose info if i delete one account?

You can neither merge or delete them. Pick one and stop using the other. If they both have purchases associated with them you will have to keep using both.

HT5824 hi..i m not sure if i have used the icloud before..how do i know if my iphone has been backed up by icloud?

hi....i m very blur at this...not sure if i have used icloud before...how do i know if my iphone has been backed up ?
it all happened 2 days ago when my iphone lost everything after updating to ios7. I couldn't even restore back up even i have done my back up before updating...
just trying my luck here , if anyone can help he to retrieve my photos and notes.

Access iCloud.com on a computer to check
http://support.apple.com/kb/PH2702
Lost or Stolen iOS device > http://support.apple.com/kb/HT5668

I can't import video from my Canon XF 100 into Final Cut Pro X. I'm told they are not compatible. Anyone have similar issues and/or solutions?

I can't import video from my Canon XF 100 into Final Cut Pro X. I'm told they are not compatible. Anyone have similar issues and/or solutions?

Google XfcpX.

I have an IPad 2,I have previously had no problem sending photos by email.But now for some reason photos I send are not successfully been sent. I'm not sure if I have changed a setting by mistake. Is there a particular Setting I should be concentrating on

I would be very appreciative if anyone could give me some advice!I have an IPad 2,I have previosly had no problem sending photos by email.But now for some reason photos I send are not successfully been sent. I'm not sure if I have changed a setting by mistake. Is there a particular Setting I should be concentrating on to making it successfully work again?Cheers!I look forward to hearing back from you!Aussie Fella!

is this how you send your photo?
                        Tap a photo, album, or event to select it.
                        Tap > Email.
                        Confirm or change the photos you want to share by tapping an option.
                              Select all the photos in an album or event: Tap All.
                              Select a range of photos: Tap Choose, tap Range, tap the first and last photos in the range, and tap Next.
                        Type the address of the recipient, add a message, and tap Send.

Need Mac download not Windows anyone else have that issue when ordering?

Need Mac download not Windows anyone else have that issue when ordering?

Yes! Yes! Yes!
And you can't complain because this company does not provide anyone to answer these questions and it theft by stealth.
My Mac order was switched to PC first time so I decided to buy again and this time it just won't download. I get a Jrun Servlett Error page instead.
This company is shonky
[email protected]

How can I tell which Adobe Forms Central subscription I have? My employer purchased it for me and I am not sure. I have the proof of purchase page.

My employer purchased it for me and I am not sure. I have the proof of purchase page. I asked for the Acrobat Pro so I could have all the features but many of the features I wanted to use say " Upgrade to edit."

Hi,
I request you to please let me know your registered email address with Adobe and the order ID, so that we can check your account details.
Regards,
Nakul

Not sure if I have a problem

Hi All,
Well, have my MBP 2.53 and started setting it up but seem to have a couple of issues and not sure if it's the MBP or if it's normal so any advice or input would be helpful.
1. When repairing permissions on the Unibody (10.5.5 with all updates installed) the message:
Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
appears and then it takes an average of about 85 seconds where there is the rolling bar and the message reading permissions database beside it before it changes to the progress bar. Once the progress bar appears and it starts to repair permissions then it is no slower than my old MBP using 10.4.
Is the 85 second 'Reading Permissions Database' normal under 10.5 or is this unusual? This is the first time using 10.5 so I have no basis for comparison.
2. When opening a few .jpg files (about 30) at the same time in individual windows is it normal for the unibody MBP to beachball? Did not happen on my old MBP so again not sure if its a 10.5 thing and need your input.
Have only had the Unibody for a day and a half but starting to get a little concerned.
Thanks for any and all input.
Cheers

1. Yes, it's normal. Leopard uses a completely different method of tracking permissions than Tiger, so the time it takes to repair permissions is much longer - typically from 5-10 minutes depending on what's currently on the hard drive.
2. Don't know. Do not own a new model so I can't test one to see. It may be slower after you first start them up because Spotlight is indexing the drive for the first time. This indexing could take quite some time (several hours) if you continue to use the computer while indexing is taking place. This could easily cause everything to run slower. If Spotlight is still indexing your drive, then wait until it finishes before doing any work. If you click on the Spotlight icon in the right corner of the menu bar a drop down pane will show the progress, and you will see a tiny dot inside the icon that indicates Spotlight is working on indexing the drive.

XML Bursting program was messed up the report format and output, not sure what is causing an issue

Hi All,
I need burst the report based on the customer number for some customers and burst based on invoice number for some customers in the same bursting program. I have made the changes accordingly and sending email attachments as expected, but when the output sent for as an attachment for each invoice the report does not printing in full format, its completely ignore one child block. Not sure what was the issue. This is very very urgent please help me out.
Following is my bursting code:
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR">
      <xapi:delivery>
         <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
        <xapi:message id="123" to="${EXCLUDED_BILL_TO_EMAIL}" attachment="true"
           subject="Confirmation for your Invoice(s)">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the attached invoice(s).
Regards,
Customer Service
        </xapi:message>
         </xapi:email>
      </xapi:delivery>
      <xapi:document output="XX_INVOICE_EMAIL_${CUST_NO}" output-type="pdf" delivery="123">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[EXCLUDED_BILL_TO_EMAIL!='N']"/>
      </xapi:document>
   </xapi:request>
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR">
      <xapi:delivery>
         <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
        <xapi:message id="123" to="${EXCLUDED_BILL_TO_FAX}" attachment="true"
           subject="Confirmation for your Invoice(s)">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the invoice(s).
Regards,
Customer Service
        </xapi:message>
         </xapi:email>
      </xapi:delivery>
      <xapi:document output="XX_INVOICE_FAX_${CUST_NO}" output-type="pdf" delivery="123">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[EXCLUDED_BILL_TO_FAX!='N']"/>
      </xapi:document>
   </xapi:request>
   
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
      <xapi:delivery>
         <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
        <xapi:message id="123" to="${BILL_TO_EMAIL}" attachment="true"
           subject="Confirmation for your Invoice ${INVOICE_NO}">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the attached invoice.
Regards,
Customer Service
        </xapi:message>
         </xapi:email>
      </xapi:delivery>
      <xapi:document output="XX_INVOICE_EMAIL_${INVOICE_NO}" output-type="pdf" delivery="123">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[BILL_TO_EMAIL!='N']"/>
      </xapi:document>
   </xapi:request>
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
      <xapi:delivery>
         <xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
        <xapi:message id="123" to="${BILL_TO_FAX}" attachment="true"
           subject="Confirmation for your Invoice ${INVOICE_NO}">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the invoice.
Regards,
Customer Service
        </xapi:message>
         </xapi:email>
      </xapi:delivery>
      <xapi:document output="XX_INVOICE_FAX_${INVOICE_NO}" output-type="pdf" delivery="123">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[BILL_TO_FAX!='N']"/>
      </xapi:document>
   </xapi:request>
   
   <xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
      <xapi:delivery>
           <xapi:filesystem output="${OUT_DIR}/INV_${SALES_ORDER}_${ORG_ID}_${INVOICE_NO}_${REQUEST_ID}_${INVOICE_DATE}.pdf">
           </xapi:filesystem>
      </xapi:delivery>
      <xapi:document output-type="pdf">
         <xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".////XXARINVOICE[P_ATTACH='Y']"/>
      </xapi:document>
   </xapi:request>
</xapi:requestset>
Thanks in Advance,
Jagadish

Initialize this:
                    String pet = "":>
error is H:\JAVA\PetAdvice.java:88: variable pet might not have been initialized
                    return pet;Geez, the error tells you the source file and the line # at which the problem occurred, in addition to a lucid description. Why couldn't you figure it out for yourself?
%

Problem with HP Officejet 8620 (just bought it) not sure if Printer or wireless issue.

Alright so hopefully I have put this in the right forum.
I just bought an HP Officejet 8620, and set it up. It printed the test pages fine yet upon trying to print homework it would dissapear in the Print Queue while saying it was "printing". Thus nothing has come out of the printer except test pages so I am in a bit of a bind.
Now the computer brought up a trouble shoot issue stating "problem with wireless network".
To give some back ground on this issue our previous printer HP Officejet 6500A about a month ago starting printing abnormally slow, and eventually reached a crawl not doing anything.
So im not totally lost, yet as of now do not know what is going on.

Hello Libertine74,
Welcome to the HP Forums.
I see that you are having some connectivity issues when attempting to print wireless.
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with when the Printer Does Not Maintain Wireless Connection.
Please feel free to write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Well, not sure if I have an issue...

Similar Messages

Maybe you are looking for