Well, some minor problems with my GF4ti 4800
Hello
I have some problems with my Geforce 4 MX 440 - 8X. I updated all of my drivers and tried evreything.I have no problems playing games using this card. Everything is perfect. But then, when I enter the MSI 3D!Turbo Experience, the program will encounter some problems and will be closed. If I go to the display propeties and enter either MSI information or MSI Clock, again it will be closed due to errors. I don't think that this is the problem with my motherboard because if the motherboard is faulty, it wouldn't work with any GPU in the first place. I really want to rectify this problem so that I can tweak my card to the fullest ( or maybe this card is a total piece of crap). The following is the specification of my system
Pentium 4 2.4 B ( 533 Mhz FSB)
Asus P4S8X motherboard
Kingston 512 MB PC 2700 DDR ram
Maxtor 40 GB Diamond Max plus 8 HDD
MSI Geforce 4 MX 440 T8x ( ms8890)
Creative Sound blaster Live 5.1 SE
Samsung DVD rom
Imation CDRW
a 400 W PSU casing
* I also have a MSI Geforce f Ti 4800. It also has the same problem. These cards would work perfectly on another comp of mine. *
Help would be very much appreciated. Thank you.
Chang K.L.
i just bought this card
i formatted my harddrive
reinstalled winxp pro updated to service pack 1
and installed cumultive patch for internet explorer
when i try to click on the tabs "MSI information" & "MSI clock"
i always get a rundll32.exe error
also MSI 3D!Turbo Experience crashes internet explorer
with an error
AppName: iexplore.exe AppVer: 6.0.2800.1106
ModName: msivga.ocx ModVer: 1.0.1.0
Offset: 00010a6d
Similar Messages
-
Some serious problems with Mountain Lion
Hi everyone,
I upgraded my mid 2010 15" MBP to Mountain Lion 2 days ago, and I have some serious problems with my machine now.
- Wifi problem: like many members 's machines, mine has problem to connect to the wifi after sleep or restarting, I had to wait 10 to 15 minutes for it to connected to my home network. Anh I tried to remove all of my settings in System Preferences/Network and added new connection. And now it cant connect to wifi anymore. I'm writing this article while sitting on the floor with my Ethernet cable plugged in my MBP. I connected to internet through a DSL modem and a Airport Extreme as a bridge and Access Point. I also tried to set up all of my network device but my MBP can't connect to the wifi still.
- Keyboard problem with Pages: I was very happy with the new iCloud syncing for Pages documents but after 5 minutes, I met a big problem with Mountain Lion. Whenever I type in Pages with Vietnames Keyboard( Mac OS X built in or from another developer: http://www.trankynam.com/gotv/ ), Pages stops working immediately. I can still drag the Pages's window around but can't type or do any editing. After that I have to force quit pages. It is really stupid that I'm writing a book in Pages and now I have to stop my working till apple fixes this ridiculous bug. I tried German Keyboard as well and Pages worked flawlessly. Do you hate Vietnamese, Apple?
- Messages problem: Since upgrading to Mountain Lion I couln't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
Apple, please test your software more before release it. I feel like I have no computer at the moment because I can't work, can't surfing the web wirelessly and can't communicate with my friends.HI,
- Messages problem: Since upgrading to Mountain Lion I couldn't send or receive any messages. It worked perfectly in Messages beta.
Does anyone have the same problems like me? Any solution such as how to reinstall Messages(I googled but found nothing)
What Messages to what type of Buddies or Contacts ?
This
I found out that the problem with my wifi was my MBP received automatically a ridiculous IP such as 169.254.170.0 instead of 192.168.1.4 as it should be.
WIll be part of the Issue as will be DNS issues.
mDNSresponder crashed with Handsoff! v1.5.3. After upgrading Handsoff! to v2.0.2, it works again.
In this case mDNSresponder also being stopped will stop DNS working.
I would guess if you have resolved these that you can Chat to people again.
4:33 PM Friday; July 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls helpLindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard. -
I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.
Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.
-
I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?
try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard) -
I'm having a minor problem with my CSS for the menu on this page. The child "2014 Fall Season" under "Season Information" is not adopting the font attributes that all of the other children sub menus are using. I've racked my brain and can't figure out why. Any thoughts?
http://www.simiyouthsoccer.org/all_stars.htmlThat menu item contains no anchors (links) so it's not picking up link styles from your #menu CSS. Try adding a null anchor like the one above it.
<li><a href="#">2014 Fall Season &9658;</a><ul>
EDIT: The code for a Right Triangle should be this ► (with the # sign)
Nancy O. -
Some strange problem with Flash/As3
Hi,
I am having some strange problem with my flash cs3.
Whatever script I write in as3 doesn't work, even a stop() function doesn't work . But when I change my publish setting to as2 it works fine.
Not sure about the root cause, may be some setting or preference or my cs3 is corrupted.
Can anybody please advise.
Thanks,
Kishortry this
create a new fla as3,
select frame 1
open the actions panel
paste in the following code
var squares:Array = new Array;
setup();
function setup():void {
for (var i = 0; i < 25; i++) {
var square:Sprite = new Sprite();
//square.name = "square" + i;
square.graphics.beginFill(Math.random() * 0xffffff);
squares.push(square);
squares[i].graphics.drawRect(0, 0, 100, 100);
squares[i].x = i*3;
squares[i].y = i*3;
squares[i].filters = [];
square.graphics.endFill();
stage.addChild(squares[i]);
for (var j = 0; j < squares.length; j++) {
squares[j].addEventListener(MouseEvent.MOUSE_DOWN, dragMovie);
squares[j].addEventListener(MouseEvent.MOUSE_UP, dropMovie);
squares[j].buttonMode = true;
function dragMovie(event:MouseEvent):void {
event.target.startDrag();
function dropMovie(event:MouseEvent):void {
event.target.stopDrag(); -
I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault. -
I installed lv 6.1 on a windows 98 system. As I am having problems of stability (frequent crashes, much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch available.
My experience with Win98 is that it is not a very stable system, regardless of software used. For example, Win2000 and XP are far more stable than 98. I've had it crash on its own if I leave the computer on for several days.
I wouldn't recommend running programs for long time (few days) on this OS.
This being said, can you be more specific in your question. What kind of stability problems did you have, which VIs did you run (if possible post them here), did you change the interrupts and priority levels on those VI, do you get error messages or blue screen....
Zvezdana S. -
Some small problems with my new 3G iPhone
Having some small problems with my new iPhone, nothing major, just annoying.
1. When I plug my iPhone in to charge/sync my Adobe photoshop keeps trying to download the photos on my iPhone, which causes an error message from Adobe that it can't download and it stops all syncing and removes my iPhone from iTunes. I have to unplug and reinsert USB cable and sometimes it works ok and sometimes I have to reinsert again. Also when charging, it will disconnect, reconnect and the samething all over again, photoshop trying to get photos and an error message.
2. Can't send e-mails via 3G? Only can get, have to connected to a WiFi to send e-mails, or is this normal?When your iPhone includes photos in the Camera Roll, it is also detected as a digital camera when connected to your computer, and whichever app you have selected to import photos will automatically launch to import the photos. If you haven't imported these photos, it is a good idea to do so as with any other digital camera. I import the photos followed by deleting the photos from the iPhone after the import process is complete. If I want any of the imported photos available on my iPhone for viewing, I add the photos to an existing album that is selected to be transferred to my iPhone under the Photos tab for my iPhone sync preferences, or add the photos to a new album followed by selecting the album under the Photos tab followed by a sync.
If your iPhone's Camera Roll does not include any photos that have not been imported, Adobe Photoshop should not launch automatically when your iPhone is connected.
I know how to disable the selected application for photo import from launching automatically regardless with a Mac, but not with Windows.
Regarding the sending email problem, who is the email account provider and does the email account provider have an authenticated SMTP server?
Most ISPs block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection unless the SMTP server is authenticated. When connected to the internet via AT&T's cellular network, it is no different in this regard. AT&T's SMTP server is included and available by default for use with an email account that does not have an authenticated SMTP server when connected to the internet via AT&T's cellular network, but you probably won't be able to use this SMTP server for sending messages with the account when connected to the internet with your ISP via an available wi-fi network - especially if the email account is provided by your ISP.
I access two email accounts with the iPhone's mail client and both accounts have an authenticated SMTP server. I've never had any problems sending with either account regardless the ISP being used for an available wi-fi network, or when connected via AT&T's cellular network. -
Does Lion support MS Office for Mac 2011? The RoaringApps compatibility list shows Office 2011 having some unspecified problems with Lion. Any confirmation yest showing compatibility with Office 2011?
I'm running MS Office 2011 on Lion and it runs just fine. No "Full Screen", but it runs just fine. There may have been an update to install (I know there was an iWork one anyway), but even before I installed any updates Office '11 worked just fine.
-
Minor Problem with MagSafe Power Adapter
I got my MBP almost a year ago now (partially why I'm asking the question) and I've noticed that my power adapter doesn't always show the charge light. Sometimes it is not on at all, and sometimes it is less bright in color (both green and amber).
If I remove it and put it back it usually corrects itself.
It if fully functional; even if the light is completely out and plugged in it still shows as charging.
So, is this normal? I never remember having this sort of problem with my PB G4.I would think the led light on my adapter cable was broken, but I discovered it works fine on a co-workers MBP. His adapter, which we know works, does NOT work (ie. the led does not come on) when attached to my computer. This indicate to me that the problem, whatever it is, can sometimes be with the computer and not the adapter.
I would be curious if others with apparently dead leds have tried their chargers on other MBPs.
Here's the long version of my story:
My 5W MagSafe completely fried after only 9 months.
The new adapter was fine for several days until this morning.
My "low battery" warning popped up, so so I plugged it in to recharge and immediately noticed the little led on the charger cord did not come on.
I found it hard to believe that I had another bad adapter, so before making the trip back to the store, I went into the studio where there are some other MBP users.
I plugged my adapter into another laptop and the led came on. It appeared to function completely normally. I tried MagSafe adapters from two other MBPs, but the led did not come on on either of them while attached to my computer.
This made me think there was some sort of problem with the connector on the computer itself. Just visually, it appears to be clean and corrosion free.
The next obvious step, it seemed, would have been to try swapping batteries with the other laptops, but mine is a 17" and everyone else here has 15"... and so we have different battery sizes.
One of the people here at the studio had a little utility called "Coconut Battery", that reports information about the battery health. When I ran it on my laptop, I got what I thought were rather surprising results.
It showed the usual things like current charge (21%), battery capacity and so on. But under "Additional Info" it said "Charger connected: Yes" and "Battery is charging: No".
I figured this narrowed it down to a problem with the battery. But as I was showing these results to my co-worker, the "Current Battery Charge" changed from 21 to 22%. Huh? We left it plugged in and it continued to show a steady climb in the charge, as if it is working normally. Except there is no led light, and the software still says it is not charging. Odd.
I then noticed that the built-in battery level indicator on the status bar was also showing the same increases. The led lights on the back of the battery are indicating an increase as well.
Just out of curiosity, I ran a second battery health analyzer program and again got these conflicting results. This one reported the same battery charge and capacity and so on as the previous one. It also recognized that the laptop was running off of AC power, that there was a battery, but it said "Not Chargeable."
So now I am going to let it continue until I have a full charge and then see if the computer will run as usual from the battery.
I don't think the store here is going to give me another adapter since this one appears to work just fine on the other computers.
Any thoughts on why the led would work on other laptops but not mine?
Why the battery health monitors report that the battery is being charged, but also that it is "not chargeable"? -
Minor problem with protective c
Ok so I recently purchased the Creative Zen Vision M Mp3 player. It's great so far and I have no real complaints about it at all, well at least not yet, but I think i'll love this player once I get used to it. By the way the touch pad isn't as bad as people seem to make it out to be, at least it is not for me.
Anyways I also bought the protecti've leather case that was designed for this MP3 player, here is my problem though. When I try and press the buttons like play/pause, the options button, back, etc with the leather case on they don't seem to do anything. I take the case off and it works fine. It's a minor problem, but I can see it becoming annoying after so many times of taking the case off to select a different song or change options or to even pause the song.
Has anyone had this minor problem and if so were they able to find a solution? Any help would be great.That menu item contains no anchors (links) so it's not picking up link styles from your #menu CSS. Try adding a null anchor like the one above it.
<li><a href="#">2014 Fall Season &9658;</a><ul>
EDIT: The code for a Right Triangle should be this ► (with the # sign)
Nancy O. -
Graphics Corruption in Some Apps - Problem with Geforce GT750
Hi
I am recently facing a graphics corruption problem with my 2013 MBPr. Yesterday I noticed that the window that shows the mail in Mail.app suddenly showed just some noise (just some strange colors). I restarted the app and it was gone. Then I installed a game named "Tales from the Borderlands". On the menu of the game I noticed the corruption again. Every time I would exit and rerun the game, the distortion would randomly change. Here are some examples:
The problem appeared throughout the game too.
Then I forced "Integrated Only" using a gfxCardStatus to use Intel Iris Pro instead of Geforce GT750. I started the game and the problem was gone. I tried some more times again by switching GPUs and every time I noticed that the problem is with Geforce GT750 and Intel Iris Pro has no problem.
Any ideas what is causing the problem and what should I do? Thanks in advance for any help.Hi Tormirez,
I can't believe my eyes.. I actually was afraid this might happen.
Since I've been following the 2011 MBP forum after i had my MBP repaired (reflow by someone near Antwerp, Belgium), I've been learning some specific things about the very likely nature of these GPU issues.
All these issues seem to be related to the replacement of leaded solder by nearly pure tin solder + not soldering according to the best profile (temperature vs time).
The factor of time saving = money saving may very well play a role here.
When you consider the nature of that leaded solder problem versus the soldering profiles, it's not hard to imagine that the problem isn't just in the 2011 model range, but may actually have started FROM that range...! I've already heard that some 2012 models also failed in a similar way.
It may all be quite logical; tin solder needs a roughly 60ºC higher temperature to get into full liquid state then leaded solder.
As the cheapest way to produce boards is probably rolling entire boards through ovens, melting the parts on it, it would require very precise monitoring of temperatures UNDER the CPU and GPU, to be SURE you have a full flow going on.
But, at the same time, as you're cooking ALL components around 240ºC, they may have chosen not to stay at this temperature long enough. Or, maybe they stop at 240ºC, while 242ºC might be the minimum required temperature to guarantee full flow.
Etc.. It's a very complicated mix of factors that determines if small or large batches of board could contain errors at all or not.
But it may at least be called "bizarre" that these solder errors are found in tens of thousands 2011 MBPs, but also in 2012 models, and in the PS4 and also other brand Windows PCs!!
If you want to test your GPU hard, download GpuTest OSX x64 0.7.0 from ( geeks3d . com / gputest ) and run the FurMark based stress test on HD resolution for 30-60 mins straight, then turn your machine off completely for 15-30 mins (until it's really cold, put it down on some cold stone floor might help), then repeat several times.
If the same problem would be hidden in there as in the 2011 models, this is the way to get it triggered soon.
If you ask me, this might be the first report of the same problem in the 2013 series.....
Question; do you game a lot? If you answer yes, then it would pretty much make a connection to this similar problem I think!
I'm curious about the results of the stress test! -
Having Some Real Problems with SSI
Please forgive me if my questions seem inexperienced. I am
just learning how to incorporate server side includes into a new
site I'm working on and am having some real problems getting things
to work properly...
I have been reading everything I can find on SSI's, and have
finally got everything to work properly on my local system,
however, now, I'm having issues after uploading the files to my
server (IX Web Hosting).
According to this document (“How to incorporate
Server-Side Includes into an HTML page “) from the Adobe
Knowledgebase, step number 4 says to…
Text
“Highlight all the text displayed in black and delete it.
The HTML inspector should contain only the information in red. It
is especially important NOT to have <html>, <head>
or<body> tags in the SSI, because this will cause the HTML on
the page to become invalid once the SSI is inserted.”
Text
Well, I tried that, but the code just looks exactly as it
does in the code viewing pane. No RED characters anywhere! So I
just deleted all the <html>, <head>, and <body>
tags and saved the file.
Now, when I insert the SSI into a new html file (which I
saved as .shtml because that’s what my web hosting provider
requires) everything looks great on my local system, but when I
upload the files to my server and try to test the page with the SSI
inserted into it, I get the following error message:
HTTP/1.1 404 Object Not Found Server: Microsoft-IIS/5.0 Date:
Sat, 05 May 2007 19:42:48 GMT X-Powered-By: ASP.NET Connection:
close Content-Type: text/html
404 Object Not Found
Both files are located in the same directory (maybe
that’s a problem?)
My question is simple, exactly what should I absolutely NOT
delete out of the source SSI file? Is there some part of it other
than the content I want to reference that needs to stay in there?
Also, both my server side include file and the html file that
references it are saved with the .shtml extension. Is this wrong?
Or does the ssi file need to be saved with an.ssi extension?
Again, sorry for the amateurish questions, but we all have to
learn sometime right?
Any help would be greatly appreciated!
Thanks,
~GregHere's an shtml skeleton page -
<html>
<head>
<title></title>
</head>
<body>
<!--#include file="foo.html" -->
</body>
</html>
and here's 'foo.html' -
<p>Hello world</p>
Does that help?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Myrrhlin225" <[email protected]> wrote in
message
news:[email protected]...
> Please forgive me if my questions seem inexperienced. I
am just learning
> how
> to incorporate server side includes into a new site I'm
working on and am
> having some real problems getting things to work
properly...
>
> I have been reading everything I can find on SSI's, and
have finally got
> everything to work properly on my local system, however,
now, I'm having
> issues
> after uploading the files to my server (IX Web Hosting).
>
> According to this document (?How to incorporate
Server-Side Includes into
> an
> HTML page ?) from the Adobe Knowledgebase, step number 4
says to?
>
>
Text
?Highlight all the text displayed in black and delete it.
> The
> HTML inspector should contain only the information in
red. It is
> especially
> important NOT to have <html>, <head>
or<body> tags in the SSI, because
> this
> will cause the HTML on the page to become invalid once
the SSI is
> inserted.?
Text
>
> Well, I tried that, but the code just looks exactly as
it does in the code
> viewing pane. No RED characters anywhere! So I just
deleted all the
> <html>,
> <head>, and <body> tags and saved the file.
>
> Now, when I insert the SSI into a new html file (which I
saved as .shtml
> because that?s what my web hosting provider requires)
everything looks
> great on
> my local system, but when I upload the files to my
server and try to test
> the
> page with the SSI inserted into it, I get the following
error message:
>
> HTTP/1.1 404 Object Not Found Server: Microsoft-IIS/5.0
Date: Sat, 05 May
> 2007
> 19:42:48 GMT X-Powered-By: ASP.NET Connection: close
Content-Type:
> text/html
> 404 Object Not Found
>
> Both files are located in the same directory (maybe
that?s a problem?)
>
> My question is simple, exactly what should I absolutely
NOT delete out of
> the
> source SSI file? Is there some part of it other than the
content I want to
> reference that needs to stay in there?
>
> Also, both my server side include file and the html file
that references
> it
> are saved with the .shtml extension. Is this wrong? Or
does the ssi file
> need
> to be saved with an.ssi extension?
>
> Again, sorry for the amateurish questions, but we all
have to learn
> sometime
> right?
>
> Any help would be greatly appreciated!
> Thanks,
>
> ~Greg
>
>
Maybe you are looking for
-
I have an 8gb ipod which has only 1200 songs on it, no photo's, no apps and no video's and it's telling me that my storage is full, can anybody help/
-
Greetings Everyone, We are implementing PS for a manufacturing firm in the next two weeks. We as well have implemented PS for our own use too. We have customized some around 6 Reports and 3 Module Pool. Now please let me know any other reports that m
-
Hi, Lets say we have two SSAS Databases. In each we have Dynamic Dimension Security implemented. The Database are only accessable to Users by the msmdpump.dll. We have some Standard Reports in Xlcubed which can be accessd by Sharepoint.So far so good
-
Target node/queue unavailable for 12i Concurrent Managers on Redhat Linux
Hi, I was able to sucessfully install Release 12 Vision on Redhat Linux.. Every thing is working fine but concurrent managers are not active except the Internal Manager. Rest of the Managers has no value in the node name field and the status is "Targ
-
Risk Owners approval using ABAP Function class
Dear All I have implemented ABAP function class ZCL_GRAC_WFA_RISK_OWNER to identify the risk owners once the role approval is done, the Workflow is working fine with one exception. My scenario is like this - i have mapped P059 risks to PR risk approv