Well that didn't take long....21.5" iMac Failure
3 days as a new iMac owner and it's already broken. So far PC/Windows wins! Just getting a white screen with an Apple logo and the activity icon spinning. Any suggestions? I was just importing photos into iPhoto and had just got used to the way iPhoto works and then everything started to freeze. Now my install CD is stuck inside the darn thing. Not a good way to start things off if Apple is going to convert this long time Windows user. Any suggestions?
+already broken+
Of course it's not broken. Restart and it'll be fine. Importing photos from where/what? If from another hard drive, understandable. Break the import into smaller amounts, such as importing from one user at a time, instead of all photos from all users in one session.
Why was your install dvd in the drive, anyway? To eject it, hold down the mouse at the very beginning of startup or restart, continuing to hold down until disc ejects - it must eject.
Similar Messages
-
How to identify EEs that didn't take a course?
Hello!
I know that there are many reports where I can pull the information of employees that took certain course, but what if I want a report to show only those employees that didn't take it (or perhaps a single report that show all employees, specifying which ones took and which ones didn't take the course).
I know I could use two different reports and then a vlookup, but I'm wondering if there are a simpler way of doing it
Thank you very much!!!Hello,
Another method could be the usage of AdHoc Queries (if you're familliar with). The infoset need to use the LDB PNP and you should add infotypes like 0 1 2 plus 1001 with relationship A/B025. You should be able to keep a result in memory and use the merge / exclude options.
regards
Hadrien -
In OS X 10.4.10 Air tunnes and other stuff takes longer to connect
Since I upgraded to OS X 10.4.x everything that is wireless takes longer to connect. For example iTunes takes like 13sec. to connect to the Airport Express. My Logitech bluetooth mouse takes like 17sec. to reconnect when it looses signal. And in Safari when I am listening to audio samples in Amazon.com it's like 1992 again it takes 20sec. to hear a 30sec. sample. All of this used to be much faster in OS X 10.3.9.
Does anyone notice this, and if so, is there a way to make things a little bit snappier?
Thanks
Message was edited by: caschreierTry doing a power cycle.
Shut all the computers, routers, airports, expresses...turn them off.
Wait a few minutes, then turn on again:
modem first, then router, then expresses, then computers.
This may not be the complete fix, but it may help the network sluggishness. -
Outgoing connections take long
Hi. I've the feeling, that outgoing connections take long / very long. When I connect via ssh to a server it takes 30-60 seconds until the server answers. Connect with ICQ, the same problem. I think it's a local problem, because it works very fast on tiger. Are the any firewall properties to set it.
Thank you.Yeah, I get the same thing. Adium won't even connect to msn. SSH takes anywhere from 30-60seconds to connect.
I've still got a g4 iBook running 10.4 with no problems at all.
I've set my firewall to be off as far as I know.
Did you get a solution for it?
Thanks -
I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?
What's the format of your video? That will give you a hint as to what plugin is failing (or missing).
If you don't know, what's the URL of your site - it shouldn't take long for someone to work out the specifics. -
Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording. -
I installed PSE 13 three weeks ago. It worked well for a while, then started to crash whenever I tried to save a file for the web. I trashed the preferences. That didn't seem to help. PSE 11 still works well on my Mac, so I think it's a software problem. I also ran the permissions repair on Disk Utility. I have Yosemite on a MacBook Pro with 4 GB of RAM.
I've not used Keynote 5.3 in OS 10.7.5 in quite some time, but I do know that in more current OS versions there is a Saved Application State folder in the Username/Library folder which can get corrupted/ messed up when an application crashes. The User Library folder, as I recall, is hidden in the Finder, but accessible by pressing and holding the Option key while clicking on the Go menu in Finder.
"com.apple.Keynote.savedState" is the folder, or perhaps file, you want to find and delete- making sure Keynote is not open at that time, which if it can't start without crashing will not be a problem.
This is a "trick" I've used with other applications that got stuck in a loop of trying to restore a pre-crash state, and obviously couldn't start as that state led to the crash. I do not see that savedState file for Keynote on my 10.9 computer, but that is where I would look.
Good luck! -
i can't change the brightness on my macbook pro. i tried the buttons on the keyboard, went to settings and tried to do it from there, didn't work. i have restarted my computer as well and that didn't make a difference. please help.
Reset the PRAM and SMC.
Barry -
Hello .. I've been subscribed for ic;oud for 20$ per year and I found it useless for many reasons: that I can not disconnect my mobile while the uploading process and it takes long time for uploading my data .. Its not a reliable system that's why I need to deactivate the space service and take my money back .. Thanks
The "issues" you've raised are nothing to do with the iCloud service.
No service that uploads data allows you to disconnect the device you are uploading from while uploading data. Doing so would prevent the upload from completing. It is a basic requirement for any uploading service that you remain connected to it for uploading to be possible.
The time it takes to upload data to iCloud is entirely dependent on how fast your Internet connection is, and how much data you are uploading. Both of these things are completely out of Apple's control. Whichever upload service you use will be affected by the speed of your Internet connection. -
I am a novice. I just bought a nikon d5200 and would like to know which Photoshop would serve me well at this juncture. I do not plan on becoming a professional, but would like to be able to edit and enhance the photographs that I will take. With several Photoshop programs on the market please advise me as to which I should purchase for the purposes I described ?
I am a novice. I just bought a nikon d5200 and would like to know which Photoshop would serve me well at this juncture. I do not plan on becoming a professional, but would like to be able to edit and enhance the photographs that I will take. With several Photoshop programs on the market please advise me as to which I should purchase for the purposes I described ?
-
I like to use my Itune card but take out my credit card info, that I will no longer use but it does not say (none) what do I do?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the region where you are located.
9. Tap "Done". -
I just bought my macbook pro 2 weeks ago and have noticed that when I go to start it up, it takes longer to power up than when I first bought it. Does anyone know why this may be and of a fix for it?
Hi. It could be that the more you pile on the HD, the longer it will take to boot. When I first bought my MBP, it took maybe 30 seconds. But as I began putting more content on the HD, it seemed to take a bit longer to boot. You may also want to consider putting your MBP in sleep mode. That's what I do with mine and it doesn't hurt at all as far as I can tell.
-
so basically i brought i iphone 5s it was perfectly working until i found some faults i sent it to apple and it has already been 11 days, also i live in peterborough is it supposed to take that long or is it supposed to take longer because im worried
If you 'sent' it somewhere it could have been delayed in transit. Or whatever is required to correct the matter isn't available. Have you phoned to confirm they have received it? Your nearest store is Cambridge, probably a very busy one.
-
Yesterday when I turned on my iPad there was icon that ask do I want to upgrade IOS well I didn't know what that was so I said yes . Well every since my iPad gas gone crazy . When I go to a send button it keeps showing the copy and paste icon over the button . Today I was sending a phone load to friend . It was a $3.85 load . But button kept showing that stupid copy and paste icon so I kept pushing the button . Well I ended up sending $3.85 three times . How do I get the upgrades out or how do I fix my iPad ?
What does this have to do with iPhones much less using them in an Enterprise environment?
Try posting to the correct forum. -
Has anybody noticed that it takes longer to boot up since the last update on my iMac?
It seems to me that bootup now takes extra time to complete on my 21" iMac since the last security update. Is this real, or have I never noticed it before?
It seems to me that bootup now takes extra time to complete on my 21" iMac since the last security update. Is this real, or have I never noticed it before?
Maybe you are looking for
-
How to get the history data from r3?
Hi Experts, I have loaded stock data for jan through the flat file load. The stock consists for 2,9,16,23,30 th dates of Jan. Remaining dates stock came from R3. so problem is stock seems double(Not exactly) for one site(Plant). i checked in BI and i
-
IE10 rendering error in UWL sub dialogs like connections status
Hi, I am using a custom framework and added the browser document mode iview with the sap-ie=EmulateIE8 parameter as described in various blogs. I also added this parameter to iviews where applicable but there are still rendering error messages in som
-
HT1414 iphone was restoring and now it is frozen on connect to ipod . how do i reset
iphone is frozen at connect to itunes screen. please help
-
Why the pacman try to install a pakage not suit my platform?
Hi,I got a problem today when I try to pacman the unzip pakage. The pacman just try to install the unzip pakage that not suit my platform Here is the message info: drmagic@gentoo etc : sudo pacman -S unzip resolving dependencies... done. looking for
-
My iPhone 4 is lagging bad and is taking forever to send messages , it also is saying that storage is almost full but i have 1.5GB left on my 6.3GB. Please help I have tried doing a soft restart by holding the home and power button that didn't help.