WELL THEN WHAT IS A GOOD PROSUMER CAMCORDER TO BUY???

In response to the "do not buy hdd cameras" thread, I am now left quite confused. anyway, I would like to be pointed in the proper direction of a new prosumer ntsc camera for my video production company. we do indie music videos and shorts, and sometimes educational movies. I am really trying to stay within $4000 range and I already know that is pretty low so please dont bother telling me that. but what is a specific camera model that will be effective for what I am doing and why? I currently have 2 XL2s and was looking to replace them with HDs since most are making that switch and it is becoming more of a demand. Thanks.

Recognize that producing work in HDV format is considerably more complex than just changing cameras.
Capture problems, conforming issues, monitoring changes and so on are very real challenges.
Jerry Hofmann wrote an article about this for the Creative COW magazine. It can be found here.
http://magazine.creativecow.net/downloads.php
Dowload the 1st issue of the COW magazine (it's free after registration) and read the workflows.
x

Similar Messages

  • What is the best miniDV camcorder to buy to export miniDV tapes to Macbook pro?

    Hey there,
    I have miniDV tapes with home videos that I want to export to iMovie or FCP 5.0 so I can turn the footage into digital video clips to burn to DVD's.  They were shot on a Sony handicam that no longer works.  I bought a Panasonic PV-gs15 in order to do the job but it doesn't export video, only pictures from SD card. Now I just want to get the best camcorder or device (within financial reason) for the job.  Can anyone tell me the best way/Camcorder to get this video off these miniDV tapes and onto my computer please?

    Hi
    May be You find something of interest in my notes regarding this (and iMovie - but it is General)
    NO CAMERA or A/D-box
    Cable
    • Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    • Camera set in Playback mode - NOT Recording mode
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK e.g. recording and playback to TV)
    A/D-box
    • Is the dip-switches set right ?
    • Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
    • Try resetting it
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    External device’s (hard disk’s)
    • Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
    • MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited. No Camera or A/D-box
    • GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
    • Does Your Mac have a FireWire Port
    • White MacBooks - don't
    • MacBook-Air - don't
    if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
    else - NO SOLUTION
    Only option as I get it is either
    • Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
    • Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
    • If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
    You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
    has one and this FW-Card-port works greatly.
    SoftWare
    • Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    • Screen Saver - OFF
    • Energy Saver - OFF
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie’08 (7.1.?), 09 or 11 ?
    • iMovie HD 6 (6.0.4/3) ?
    Other ways to import Your miniDV tape
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE   Mac OS Extended   formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About . . / More . .
    under Firewire.. what do you read . . ?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choice / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    No Camera or bad import
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that helps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
    MaryBoog wrote
    Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
    //support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
    What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
    Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
    Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
    Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
    This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
    Yours Bengt W

  • What is a good practical book to buy for Tuxedo

    Hi everyone
    i need to know what would be the most practical book to buy for the Tuxedo. it
    doesn't have to be a manual but something thats practical.
    Thanks very much
    mario

    I'm not worried about it at all. I might not ever use Tuxedo again.
    The software will surely be maintained and updated, but Mario was asking about books.
    Wayne
    William Cai wrote:
    I think Chinese team can deal with this product . Don't worry about that !
    Take care!
    William
    "Wayne W. Scott" <[email protected]> ????
    news:[email protected]..
    Don't hold your breath! Not with all the maintenance work being moved toChina.
    /wws
    Winfried Scheulderman wrote:
    ..and it's ONLY useful book at this moment - worth its money.
    Even if it sticks to TUX 6.x, all the basic concepts are clearly
    explained and
    still valid to date.
    Actually it deserves an update (BEA?).
    Winfried
    "William Cai" <[email protected]> wrote:
    Hi, Mario
    "The Tuxedo System" is the bible for tuxedo developer. You can find it
    through www.amazon.com .
    Take care!
    William
    "Mario" <[email protected]> ????
    news:40482d09$[email protected]..
    Hi everyone
    i need to know what would be the most practical book to buy for theTuxedo. it
    doesn't have to be a manual but something thats practical.
    Thanks very much
    mario

  • What is a good car charger to buy?

    I've read that there are sometimes problems with chargers fitting into some of the cases. Any recommendations?

    Cheapest one that works. Look on Amazon. 

  • About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

    About an hour ago, I purchased Real Racing 2 from the Mac App Store for $12.99, but since then it has not downloaded one bit, even though I have a stable wifi connection. The money has already been taken from my account as well. What should I do?

    Just to make sure, open Mac App Store and click Purchases. Can you pause the download and restart it?

  • What's a great, affordable Mini-DV camcorder to buy for Final Cut?

    I just got a MacBook Pro and Final Cut Express. What's a great Mini-DV camcorder to buy if I was to get my feet wet with video editing? I've just graduated from film school, looking to make short films and short documentaries. Does anyone know what a good entry level camera would be and what type of equipment I'd need? Thank you so much, I'm on my own in this so any help I could get would be great!

    hey there RohanRuin, welcome to Discussions!
    what you get should be determined by your needs/project & your budget... if you just completed film school don't you have some idea of the features & capabilities of cameras & other tools necessary to shoot clean usable footage. anyway.... any prosumer Sony, Panasonic or Canon will be a good buy as they have manual controls as well as automatic, they also have features being left out on lo-$$ consumer cams, such as mic in, headphones out, analog to digital conversion. JVC & Canon HDV cams have interchangeable lenses.
    a solid tripod that works w/ your cam(size & weight), lights & stands-will it be "guerilla" lighting that you cobble together from your local Home Depot, or will you buy Lowell instruments in a 3-5 piece kit? ....softboxes? you'll need/acquire all sorts of stuff as you progress in your career. i still have/use a few of the reflector shop lights i got when i began 25 years ago to shoot small projects 'cause that's what i could spend. also think about some sort of external mic-ing so as not to record cam noise. there's more but i think you need to assess your needs & budget first.
    i use Sony mini DV & HDV cams, & depending on the project, a compact audio mixer, Shure & CAD mics. iighting instruments w/ barndoors & gels, foamcore reflectors, a couple of battery-powered on cam lights. a cheap lav that works for interviews,... get the most cam that you can (3-chip over one-chip) so you can continue to use it for a few years, a good lav mic if you'll need it or a good stick mic, boom & stand, maybe a couple of halogen shoplights are my starter suggestions.
    good luck.

  • What's a good external keyboard for MBP

    Given that the MBP keyboard is so inadequate and Apple is seemingly too stubborn to give us a good one, an external keyboard is mandatory. However, I'm not sure what's good in the Apple world. There is, of course, the Apple keyboards and I'm going to take a look, but there are also some from Logitech and others. Does anyone have any suggestions on good ones? I purchased the iHome IH-K236LS, but just looking at it and feeling it and seeing that it requires a power cord is not making me feel like it's a good purchase. Plus the mouse feels incredibly cheap. Like something from a kids toy. And it requires two of the three USB ports (but does add two on the keyboard). Anyway, I'm thinking I'd better check into other possibilities, so any suggestions would be appreciated.

    People have such different views of what makes a "good" keyboard, GTGeek, that it is almost impossible to make suggestions without getting a better idea of what your requirements are.
    I grew up using manual typrewiters (Olivetti Lettera 32's etc), migrated to IBM and Brother electrics, and then nearly 30 years of different computer and data terminal keyboards.
    In the early years, perhaps not surprisingly, the closer a computer got to approximating that of an IBM golfball the happier I was. Few computer keyboards seemed to have the "feel" or travel that I was used to. Despite this i gradually found I adapted to almost all of them.
    I still have many of my older computers and I often get a bit of a shock when I use them these days! My favourite in days gone by on a portable was on the NEC8021a, but today when I use it the keys seem too sculpted and to have too much travel (both features I once really liked about it!)
    The keyboards on modern MBPs , of course, are at the opposite extreme - flat keys and little travel. The same goes for Apple's own current external keyboards. I now use them all the time, but if you don't like the keyboard on a current MBP I doubt you will want to yourself. The feel is very similar.
    The older white Apple Bluetooth keyboards had more travel , and more sculpting and a nice feeling of "solidity", but can only be found second hand these days.
    I personally like the Apple Pro wired keyboards in days gone by, but, as with the white bluetooth they are now history.
    I have two Logitech wireless and and a Microsoft USB keyboard tucked away in the draw (together with just about every keyboard Apple have ever made) . The Logitech and MS ones feel very "plasticky" compared to Apple offerings, but, as I said, I have simply adapted to the latter over time. You might find them fine if that is what you are used to.
    On Mac notebooks my favourites in the past were those on the PB1400, the PB 12 and the earlier models of the MBP, but I've adapted to the current MBP ones now as well.
    All of which adds up to the fact that the only way to decide something like this is to test them yourself, and, perhaps, to be prepared for a period of adjustment whatever you get before you can really judge it. Familiarity breeds contempt, they say, but in the case of keyboards it has always seemed quite the opposite to me. What you have been using most in recent times always seems to be the best after a while!
    Cheers
    Rod

  • What's a good interface to record voice/guitar tracks in Logic Pro

    Hello - could you tell me what would be a good interface to record voice/guitar into a Logic Pro project please?  Thanks.

    planetCAS wrote:
    re the firmware update - there is talk that this should only be done if you are going to use USB - and also that it needs to be done via Windows.........I am confused re this?
    I don't know about that, I don't own a Phonic, but if you only have to do it for USB, well, then there's no problem and you don't have to do anything, so...
    Also when you say DAW (what does that stand for?
    Digital Audio Workstation; Logic, Cubase, Protools etc are all DAWs. You'll probably encounter this term once in a while...
    I just want to make sure and sorry if i sound silly but I should be able to use Phonic as my interface with Logic Pro without using Cubase?
    Yes.

  • What is C++ good for?

    I think it's kind of weird that Microsoft can't build a class designer that displays manged types in C++. Why is it that C++ always comes last out of all of the languages! I know it isn't the most popular language but still, you begin to feel like Microsoft are trying to shut it off so there are only 2 languages, C# and VB. Over the years I have learned to program in C++ because of the pointer functionality and the sense of control you have over your code. Where as in C# you know less about what pointers and memory are doing and as a result it makes it easier to program in C#.
    But then it begs the question what is C++ really good for at the end of the day. There is less and less functionality for it and it's language with many syntax obstacles compared to the easy and quick ways of writing C# code.
    I would really appreciate different sides of the debate because then it might help me to realize that learning all about C++ wasn't such a waste of time after all.
    Thanks in advance

    What is C++ good for?
    simple answer: it's the only language you can use to write real programs with (= for a computer) ... all other "programming" languages are some kind of scrippting tools in my eyes
    but today they even call html and css a "programming" language ... that's like saying "hey, I'm a chef, I know how to cook water"
    it's true, that we should talk about C/C++ and not about C++ alone and it's also true, that there are things in those language which I would like to change... but far less than in C#, Java and VB... oh and by the way: no, it's not complicated,
    it's powerful ... with C/C++ you can program the machine! you can decide what it should do! and you know if you're talking about a pointer, a variable, and integer or what ever...
    and if somebody is passing a string by value... well, then... this person simply isn't a programmer... that's it ...
    so, again... what is C/C++ good for? it's the only way to write computer programs
    that's what I think...
    Rudolf

  • What is so good about Oracle Database?

    Dear Sir,
    The project that I'm working on is using Oracle database. Therefore, I don't have not much experience in other rdbms.
    Sometime my customer ask, what is so good about oracle compare to others like ms sql server, sybase, informix, mysql and so on.
    So, hope someone can give some distinctive strength about Oracle database. This is important for me as well as customer so that we can understand that why using Oracle database is the right choice.
    Please advise.
    Thanks.

    i use napster to discover new music. if i really like it, i track down the CD. 28k wma's or mp3s or whatever sound pretty bad. you're not right about them sounding like cassettes. i think you are forgetting just how bad cassettes sound. most 28k's i've heard sound better then cassettes, but paying $9.99 for 28k tracks....NO WAY. $3 for 28ks? sure the upside of 28ks over cassettes tho is the fact that you can transfer the files around from player to player and mp3s dont get stretched out in the sun :smileyvery-happy:

  • What's a good book for getting started?

    I've been doing web design in HTML and ColdFusion for almost 3 years. It's clear that ColdFusion is on it's way out and I need to learn J2EE/Java/JSP etc. I have a few questions:
    Java is a term I've heard associated with C++ and other types of programming as well as Web design. Are the Java/C++ Java and the Web Java basically the same type of language? Is the Web Java and JavaScript the same thing? I'm very confused!
    What is a good book for getting these types of questions answered and getting started in J2EE/Java/JSP? There are quite a few variations of script languages out there and I want to make sure I learn the right stuff, ie the stuff that employers are going to be needing.
    Thanks!

    Here is a free online version of a good book:
    http://pdf.coreservlets.com/Core-Servlets-and-JSP.pdf
    Print it off or read from the screen. Otherwise, there are several good Java books out there. What I would do is go to the bookstore and thumb through a few books. Depending on what type of book you want (example based or theory) find the books that you think would satisfy your learning style. Write down the names and authors, go home and buy them used online at Amazon for tremendous discounts. This way you can buy several versus just one.

  • What's a good file recovery program for a MacBook Pro running IS 10.7.5?

    Hey gang - I ordered a miniStack 4TB external hard drive from OWC a few months ago during a long overseas trip. I finally unwrapped it and started dumping data to the drive from the 1TB drives (also from OWC) I used via my MacBook Pro. I connected the 4TB to the laptop with FW800.
    I came back from the gym (gone about two hours) and saw a "the drive wasn't disconnected properly..." window. There was a clicking noise coming from the drive, which means mechanical failure.
    I went into Disk Utility and the drive is there but it's grayed out. I changed cables to USB 3.0. Unplugged the drive. Shut down the laptop. Then went through the start up and nadda.
    So before I run off a disk repair place in town and spend $1000, what's a good hard drive recovery program to use to pull the data? I only dumped 1.5TBs until the 4TB and have other drives to dump that data too if I need to.
    Thanks.
    Cheers,
    Bill.

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service, such as Data Recovery by DriveSavers, which is very expensive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • Lost a 2 hard drives, have 7 k photos on a touch that I need to load on IMAC with a new hard drive, how do I do it.  Just never went from a Touch to iMac.  I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!

    Lost my hard drive and also an Ipad, but have 7 k photos on a Touch that I need to load on fixed IMAC with a new hard drive, how do I do it. (There were more photos than the 7k, but they were saved on other drives, thank goodness).  7K pohotos on the Touch are no where else, must be saved!  Just never went from a Touch to iMac.  I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!  New Aperture and IPhoto on IMAC with no other photos loaded on the new hard drive yet.

    I'd ask in the iTouch forum where there are more iTouch users there than here and they should know how to off load the photos.  It might take a 3rd party app. 
    OT

  • What's a good video app to use? I have iPhoto and iMovie, but they won't let me email a video. I also want to be able to make a dvd of my home movies. Any suggestions?

    What's a good video app to use? I have iPhoto and iMovie, but it these wont let me do certain things, such as email a video. I also want to be able to make a dvd of my home movies. Any suggestions?

    Unless you want a new computer, forget about AVCHD. It requires too much muscle to edit comfortably on anything but the fastest computer.
    What camera is nice, depends on your budget. Formats that are easy to edit are HDV, DVCProHD (P2) and XDCAM. In the consumer range you could look at the Canon HV40 or XH-A1s, in the prosumer range look at the Panasonic AG-HPX170, Canon XH-H1s, JVC GY-ND250 or Sony HVR Z5 or Z7 and all Sony XDCAM cameras, especially the EX1 and EX3. In the professional range look at the Sony PDW-F355 or upward.

  • What's a good way to do a thread dump into a separate file

    What is a good way to do a thread dump automatically into a separate file.
    Example. I run a script to do the thread dump, but unfortunetly, it goes into my stdout log file with the rest of my weblogic errors.
    Any ideas? I want it in a separate file when I run my script?

    Do a Google search on "Drobo S" "benchmark."  I don't have a Drobo S, only the regular Drobo.  But here's a guy who tested one on Windows:
    http://mansurovs.com/drobo-s-review-usb-3-0-2nd-generation
    This one has it a bit faster:
    http://the-gadgeteer.com/2011/12/31/drobo-s-storage-array-review/
    Do read up on a few reviews of it, and be absolutely clear that interface speed (i.e. eSATA versus Firewire versus Thunderbolt) is NOT the same as the performance of the system.  The Drobo cannot keep up with any interfaces... at least the Drobo and the Drobo S cannot.
    I am not using the FS model which is a NAS.  I am using the plain old "Drobo" which is slower than the Drobo S, but that's not to say that the Drobo S is fast, because it is not.
    The Drobo in theory is really attractive: Dead simple to manage, can mix and match drive sizes, offers you some data protection, etc.  However do note that protected storage is not, in and of itself, a backup.  You need other backups besides just the data on the Drobo.  And, because it's so slow, it's really not a great fit for photo storage.  See this review from a guy who used to think the Drobo was great for that and then appended his review:
    http://www.stuckincustoms.com/drobo-review/
    To be as clear as possible, IMO the BEST backup strategy with something like Aperture (so long as your managed Aperture library is of a manageable size, like < 800 GB), is to get a few small portable Firewire 800 drives and keep vaults on each one.  They are great because they are easy to use, to have with you, are bus powered, and you WILL offsite them.

Maybe you are looking for