Well, where is it???

I purchased the 2.1 software update and I don't know what happened. I pushed the BUY button and later I agreed to all terms, ect and pushed the button. So far nothing. All sales are final and it still wants me to buy another 2.1 update. Nothing is in my purchase box either.
Well, I'm certainly not going to try to buy it a second time and get charged twice. Thanks to the I Am Rich fiasco and all sales are final.

"+Updating to iPhone 2.1 software will delete all music,+
+videos and photos on this iPod including iTunes+
+Store purchases. To persever your your media, apply+
+this update on the computer where you sync music,+
+videos and photos.+
+Updating on this computer will only presereve contracts, calendars,+
+text messages and other settings.+"
I don't understand this Warning. It says to update to 2.1 I will lose my media on my iPod. I don't want to lose my media but it says if you want to save your media, update on the PC where you Sync (where else would I sync?).
I don't get it. Is it saying... updating to 2.1 will cause you to lose your media unless you update on the PC where you sync your media???

Similar Messages

Crayons are the only color well - where did the rest go?

Using Mac os 10.3.9 with pages 2.02... I only have crayons available for color wells. Originally I had the wheel, the slider, etc. but now only have crayons. How do I regain the others? Thank you.
Mac OS X (10.3.9)

If the palettes are in other applications, then I'd suggest starting by deleting your preferences file. You'll find it in your home directory->Library->Preferences->com.apple.iWork.Pages.plist . Delete this file and restart Pages, and see if that works. If not, the next step would be to re-install iWork.

E55 - Well, where is IT?!!!

E55 and E75 announced on the same day in mid-Feb at MWC. 2-months later E75 available, 6-months later E55.....???? My two main suppliers can only hazard guestimates, currently running (maybe!) at the end of the month. Even Apple were not THIS bad with their i-poo phone. You might have had to wait from announcement to actual launch but at least it arrived on time! Think about it Nokia *GRRR*

"+Updating to iPhone 2.1 software will delete all music,+
+videos and photos on this iPod including iTunes+
+Store purchases. To persever your your media, apply+
+this update on the computer where you sync music,+
+videos and photos.+
+Updating on this computer will only presereve contracts, calendars,+
+text messages and other settings.+"
I don't understand this Warning. It says to update to 2.1 I will lose my media on my iPod. I don't want to lose my media but it says if you want to save your media, update on the PC where you Sync (where else would I sync?).
I don't get it. Is it saying... updating to 2.1 will cause you to lose your media unless you update on the PC where you sync your media???

LSMW - Open Sales Orders

Hello Friends
I want to find if anybody can guide me on how to get all open sales order tables , i want to create a format and create a flat file for uplodading the file , for this what do i need and how do i do it.
Also for creating LSWM can i use the existing one which i can just Assign the New file to the existing one .
Regards.

Dear Mehmood,
I want to find if anybody can guide me on how to get all open sales order tables
You want to extract all the open sales orders- which you can get from Table:VBUP key in overall document status in selection screen ( You can use VBUK also- but if there are certain sales orders in which some of the items are completed or few of them open, using VBUK - you will not get exact records)
Secondly, you can get the data by using Query also- in SQVI
design a query with VBAK / VBAP & VBUP
so that from VBAK you can give time period & sales area details
from VBAP - you can enter plant relevant details to filter certain records & item category as well
where as VBUP- filter wth the status.
once downloaded store in flat file.
Now Create LSMW object by using batch input recording method. after mapping the relevant fields,
prepare the flat file in such a - it suits to the upload file / recording file. then you can upload the already downloaded n stored open sales orders in flat file.
Hope this is what you are looking for.
Regards,
ReazuddinMD

Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Photoshop Elements 11 - Error when printing multiple times

After printing a photograph cannot print another. Error message: "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." have to close and reopen the program to print one more.
I have this program on my laptop as well where it does not have this problem. Have tried reinstalling but problem remains on my desktop.
Message title was edited by: Brett N

thanks for that 1.99jon. I have two printers connected, one which I use for photo printing and the other for docs. The docs one was default. First I discovered that if I used the default everything worked fine on repeat printing, but failed again when I chaged to the photo machine. Second I tried changing the default to the photo machine. Repeat printing fine on that now, bur it is also ok if I change to the docs printer. How weird!!
Hope I have made this clear enough.

Not able to load data in tables with correct way

Hi
i made one trigger to load data in view and tables.
CODE FOR TRIGGER>>>>
Object Details Code Errors SQL
CREATE OR REPLACE TRIGGER "WELL_GENERATOR_TRIGGER_1"
INSTEAD OF INSERT ON VIEW_WELL_GENERATOR_FORM
FOR EACH ROW
DECLARE
rowcnt number;
BEGIN
INSERT INTO facility (FAC_PK) VALUES (:NEW.FAC_PK);
SELECT COUNT(*) INTO rowcnt FROM WELL WHERE WEL_PK = :NEW.WEL_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL (WEL_PK,SITE,FAC_FK) VALUES(:NEW.WEL_PK,:NEW.SITE,:NEW.FAC_PK);
ELSE
UPDATE WELL SET WELL.SITE = :NEW.SITE,
WELL.FAC_FK = :NEW.FAC_PK
WHERE WELL.WEL_PK = :NEW.WEL_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM WELL_STATUS WHERE WELL_STATUS.STA_PK = :NEW.STA_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL_STATUS (WELL_TYPE, WELL_TYPE_DATE, OPER_STATUS, CLASS,WEL_FK)
VALUES(:NEW.WELL_TYPE, :NEW.WELL_TYPE_DATE, :NEW.OPER_STATUS, :NEW.CLASS,:NEW.WEL_PK);
ELSE
UPDATE WELL_STATUS SET WELL_STATUS.WELL_TYPE = :NEW.WELL_TYPE,
WELL_STATUS.WELL_TYPE_DATE = :NEW.WELL_TYPE_DATE,
WELL_STATUS.OPER_STATUS = :NEW.OPER_STATUS,
WELL_STATUS.CLASS = :NEW.CLASS,
WELL_STATUS.WEL_FK = :NEW.WEL_PK
WHERE STA_PK = :NEW.STA_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM PERMIT WHERE PERMIT.PER_PK = :NEW.PER_PK;
IF rowcnt = 0 THEN
INSERT INTO PERMIT (AUT_STATUS,WEL_FK) VALUES (:NEW.AUT_STATUS,:NEW.WEL_PK);
ELSE
UPDATE PERMIT SET PERMIT.AUT_STATUS = :NEW.AUT_STATUS,
PERMIT.WEL_FK = :NEW.WEL_PK
WHERE PERMIT.PER_PK = :NEW.PER_PK;
END IF;Now But still i am not getting result which i want.Like in WELL_STATUS table i could nt able to insert the value (WEL_FK) from (WEL_PK).And In PERMIT table column (WEL_FK) still i could nt able to insert the value (WEL_PK).
Now WEL_PK value autogenerate from the SEQ same with STA_PK and PER_PK.But instead of taking value from seq STA_PK take the value from WEL_PK (dnt know why ? But in data its shows me Same value WEL_PK and STA_PK).Same thing With PER_PK.
so where i am wrong ? i really need your help.
workspace:PRACTISE
UN:[email protected]
PW:testing
Application: 39289 - TESTTING
Thanks
Edited by: vijaya45 on Jul 13, 2009 9:44 PM
Edited by: vijaya45 on Jul 14, 2009 12:48 AM

Hello vijaya45,
Not sure if this will help, but I noticed you currently have a WELL_GENERATOR_TRIGGER_1 and a WELL_GENERATOR_TRIGGER_2, and "1" is disabled but "2" is enabled. Which one is supposed to be running at this point?
John

Not able to load data in view

Hi All
i had created one view based on four different tables.Now to enter the data in load i had successfully created INSTEAD OF TRIGGER on view.But data load into tables but when i try to see data in view then its shows me nothing.
so why my data not load in view but lad into four diff tables.
---VIEW CODE
CREATE OR REPLACE FORCE VIEW "VIEW_WELL_GENERATOR_FORM" ("WEL_PK", "STA_PK", "PER_PK", "FAC_PK", "WELL_TYPE", "WELL_TYPE_DATE", "OPER_STATUS", "STATUS_DATE", "CLASS", "SITE", "FAC_TYPE", "AUT_STATUS") AS
select     "WELL"."WEL_PK" as "WEL_PK",
     "WELL_STATUS"."STA_PK" as "STA_PK",
     "PERMIT"."PER_PK" as "PER_PK",
     "FACILITY"."FAC_PK" as "FAC_PK",
     "WELL_STATUS"."WELL_TYPE" as "WELL_TYPE",
     "WELL_STATUS"."WELL_TYPE_DATE" as "WELL_TYPE_DATE",
     "WELL_STATUS"."OPER_STATUS" as "OPER_STATUS",
     "WELL_STATUS"."STATUS_DATE" as "STATUS_DATE",
     "WELL_STATUS"."CLASS" as "CLASS",
     "WELL"."SITE" as "SITE",
     "FACILITY"."FAC_TYPE" as "FAC_TYPE",
     "PERMIT"."AUT_STATUS" as "AUT_STATUS"
from     "FACILITY" "FACILITY",
     "PERMIT" "PERMIT",
     "WELL_STATUS" "WELL_STATUS",
     "WELL" "WELL"
where "WELL"."WEL_PK"="WELL_STATUS"."WEL_FK"
and     "PERMIT"."WEL_FK"="WELL"."WEL_PK"
and     "FACILITY"."FAC_PK"="WELL"."FAC_FK"
---INSTEAD OF TRIGGER CODE...
CREATE OR REPLACE TRIGGER "WELL_GENERATOR_TRIGGER_1"
INSTEAD OF INSERT ON VIEW_WELL_GENERATOR_FORM
FOR EACH ROW
DECLARE
rowcnt number;
BEGIN
INSERT INTO facility (FAC_PK) VALUES (:NEW.FAC_PK);
SELECT COUNT(*) INTO rowcnt FROM WELL WHERE WEL_PK = :NEW.WEL_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL (SITE,FAC_FK) VALUES(:NEW.SITE,:NEW.FAC_PK);
ELSE
UPDATE WELL SET WELL.SITE = :NEW.SITE,
WELL.FAC_FK = :NEW.FAC_PK
WHERE WELL.WEL_PK = :NEW.WEL_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM WELL_STATUS WHERE WELL_STATUS.STA_PK = :NEW.STA_PK;
IF rowcnt = 0 THEN
INSERT INTO WELL_STATUS (WELL_TYPE, WELL_TYPE_DATE, OPER_STATUS, CLASS,WEL_FK)
VALUES(:NEW.WELL_TYPE, :NEW.WELL_TYPE_DATE, :NEW.OPER_STATUS, :NEW.CLASS,:NEW.WEL_PK);
ELSE
UPDATE WELL_STATUS SET WELL_STATUS.WELL_TYPE = :NEW.WELL_TYPE,
WELL_STATUS.WELL_TYPE_DATE = :NEW.WELL_TYPE_DATE,
WELL_STATUS.OPER_STATUS = :NEW.OPER_STATUS,
WELL_STATUS.CLASS = :NEW.CLASS,
WELL_STATUS.WEL_FK = :NEW.WEL_PK
WHERE STA_PK = :NEW.STA_PK;
END IF;
SELECT COUNT(*) INTO rowcnt FROM PERMIT WHERE PERMIT.PER_PK = :NEW.PER_PK;
IF rowcnt = 0 THEN
INSERT INTO PERMIT (AUT_STATUS,WEL_FK) VALUES (:NEW.AUT_STATUS,:NEW.WEL_PK);
ELSE
UPDATE PERMIT SET PERMIT.AUT_STATUS = :NEW.AUT_STATUS,
PERMIT.WEL_FK = :NEW.WEL_PK
WHERE PERMIT.PER_PK = :NEW.PER_PK;
END IF;
Thanks

Hi
Thanks for your reply.here i am adescribing my code for the tables.
CREATE TABLE "FACILITY"
(     "FAC_PK" NUMBER(8,0),
     "FAC_STATE_UK" VARCHAR2(4),
     "DELFLAG" VARCHAR2(1),
     "FAC_TYPE" VARCHAR2(1),
     "FAC_NAME" VARCHAR2(80),
     "STREET1" VARCHAR2(50),
     "STREET2" VARCHAR2(50),
     "CITY" VARCHAR2(60),
     "SATE" VARCHAR2(2),
     "ZIP" VARCHAR2(14),
     "LABEL_STREET_1" VARCHAR2(30),
     "LABEL_STREET_2" VARCHAR2(30),
     "LABEL_CITY" VARCHAR2(15),
     "LABEL_COUNTY" VARCHAR2(10),
     "STATE_OR_TRIBE" VARCHAR2(3),
     "SIC_CODE" VARCHAR2(4),
     "NAICS_CODE" VARCHAR2(6),
     "PETIT_STATUS" VARCHAR2(2),
     "STATE_CONTACT_NAME" VARCHAR2(30),
     "TRIBAL_NAME" VARCHAR2(30),
     "TOTAL_WELLS" NUMBER(5,0),
     "LANDOWNER_TYPE" VARCHAR2(1),
     "LOC_IDENTITY" VARCHAR2(1),
     "PROJECT_STATUS" VARCHAR2(25),
     "TRIBE_YN" VARCHAR2(1),
     "INFO_SOURCE" VARCHAR2(35),
     "FAC_DESC" VARCHAR2(3),
     "FAC_LAT" NUMBER(10,8),
     "FAC_LONG" NUMBER(11,8),
     "FAC_ACC_VALUE" NUMBER(6,0),
     "FAC_HORIZ_DATUM" VARCHAR2(3),
     "FAC_METHOD" VARCHAR2(3),
     "FAC_POINT_LINE_AREA" VARCHAR2(3),
     "FAC_SOURCE_SCALE" VARCHAR2(2),
     "FAC_COUNTY" VARCHAR2(35),
     "FAC_HIST_LAT" VARCHAR2(100),
     "FAC_HIST_LONG" VARCHAR2(100),
     "HIST_NOTES_ACTDATE" DATE,
     "HIST_NOTES_ACTNEEDED" VARCHAR2(15),
     "HIST_SUBMITBY" VARCHAR2(35),
     "HIST_ENTRYDATE" DATE,
     "HIST_ID" VARCHAR2(64),
     "AUD_ACTION" VARCHAR2(10),
     "AUD_TIME" DATE,
     "AUD_BEFORE_VALUE" VARCHAR2(80),
     "AUD_AFTER_VALUE" VARCHAR2(80),
     "HIST_NAME" VARCHAR2(100),
     "HIST_CONTACT" VARCHAR2(80),
     "HIST_FULL_STREET" VARCHAR2(100),
     "HIST_FULL_FAC_NAME" VARCHAR2(200),
     "FORMER_FAC_NAME" VARCHAR2(100),
     "COMMENTS" VARCHAR2(300),
     "HIST_ORIGINATOR" VARCHAR2(20),
     "PHONE" VARCHAR2(15),
     "PHONE_EXT" VARCHAR2(8),
     "FAX" VARCHAR2(15),
     "EMAIL_ADDRESS" VARCHAR2(30),
     "EMAIL_ADDRESS_DOMAIN_NAME" VARCHAR2(30),
     "FAC_URL" VARCHAR2(60),
     "LAST_UPDATE_LOTUS_NOTES" DATE,
     "NUM_INSPECTIONS" NUMBER(6,0),
     "NUM_PERMITS" NUMBER(6,0),
     "NUM_CONVERSIONS" NUMBER(6,0),
     "LAST_UPDATE" DATE,
     "USERNAME" VARCHAR2(16),
     "CREATED_BY" VARCHAR2(16),
     "CREATED_ON" DATE,
     "EDITED_BY" VARCHAR2(16),
     CONSTRAINT "FACILITY_PK" PRIMARY KEY ("FAC_PK") ENABLE,
     CONSTRAINT "FACILITY_STATE_UK" UNIQUE ("FAC_STATE_UK") DISABLE
CREATE OR REPLACE TRIGGER "BI_FACILITY"
before insert on "FACILITY"
for each row
begin
if :NEW."FAC_PK" is null then
select "FACILITY_SEQ".nextval into :NEW."FAC_PK" from dual;
end if;
end;
for the WELL table----
CREATE TABLE "WELL"
(     "WEL_PK" NUMBER(8,0) NOT NULL ENABLE,
     "FAC_FK" NUMBER(8,0),
     "CNT_FK" NUMBER(8,0),
     "GEO_FK" NUMBER(8,0),
     "WEL_STATE_UK" VARCHAR2(4) DEFAULT '09DI',
     "DELFLAG" VARCHAR2(1) DEFAULT 'N',
     "NAME" VARCHAR2(80) DEFAULT 'No data',
     "SITE" VARCHAR2(50) DEFAULT 'No data',
     "HIGH_PRIORITY_YN" VARCHAR2(1) DEFAULT ('N'),
     "AQUI_EXEMPT_YN" VARCHAR2(1) DEFAULT ('N'),
     "TOTAL_DEPTH" NUMBER(5,0),
     "WELL_IN_SWA" VARCHAR2(1) DEFAULT ('U'),
     "AUD_ACTION" VARCHAR2(10),
     "AUD_TIME" DATE,
     "AUD_BEFORE_VALUE" VARCHAR2(80),
     "AUD_AFTER_VALUE" VARCHAR2(80),
     "LAST_UPDATE" DATE DEFAULT sysdate,
     "USERNAME" VARCHAR2(16) DEFAULT user,
     CONSTRAINT "WEL_AQUI_EXEMPT_YN_CK" CHECK (AQUI_EXEMPT_YN IN ('Y', 'N', 'U' )) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "WEL_HIGH_PRIORITY_YN_CK" CHECK (HIGH_PRIORITY_YN IN ('Y', 'N', 'U' )) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "WEL_WELL_IN_SWA_CK" CHECK (WELL_IN_SWA IN ('Y', 'N', 'U' )) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "WEL_WEL_STATE_UK_NN" CHECK (WEL_STATE_UK is not null) DEFERRABLE INITIALLY DEFERRED DISABLE,
     CONSTRAINT "WEL_WEL_STATE_UK_CK" CHECK (WEL_STATE_UK IN ('09DI', 'CAOC', 'GUEA', 'MPEQ', 'NVEP', 'NNUI' )) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "WEL_PK" PRIMARY KEY ("WEL_PK") DEFERRABLE INITIALLY DEFERRED ENABLE
ALTER TABLE "WELL" ADD CONSTRAINT "WELL_CON_FK" FOREIGN KEY ("FAC_FK")
     REFERENCES "FACILITY" ("FAC_PK") ON DELETE CASCADE ENABLE
CREATE INDEX "WEL_PK" ON "WELL" ("WEL_PK")
CREATE OR REPLACE TRIGGER "WEL_WEL_PK"
BEFORE INSERT ON "WELL"
FOR EACH ROW
BEGIN
SELECT "well_PK_seq".NEXTVAL INTO :NEW.wel_pk FROM DUAL;
END;
ALTER TRIGGER "WEL_WEL_PK" ENABLE
FOR THE WELL_STATUS TABLE -----
CREATE TABLE "WELL_STATUS"
(     "STA_PK" NUMBER(8,0) NOT NULL ENABLE,
     "WEL_FK" NUMBER(8,0),
     "DELFLAG" VARCHAR2(1) DEFAULT 'N',
     "WELL_TYPE" VARCHAR2(12) DEFAULT '5X',
     "WELL_TYPE_DATE" DATE,
     "OPER_STATUS" VARCHAR2(2) DEFAULT 'AC',
     "STATUS_DATE" DATE DEFAULT sysdate,
     "CLASS" VARCHAR2(2) DEFAULT '5',
     "R9_WELL_TYPE" VARCHAR2(4),
     "LAST_UPDATE" DATE DEFAULT sysdate,
     "USERNAME" VARCHAR2(16) DEFAULT user,
     CONSTRAINT "STA_CLASS_CK" CHECK (CLASS IN ('0','1','2','3','4','5', 'CV')) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "STA_CLASS_NN" CHECK (CLASS is not null) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "STA_STATUS_DATE_NN" CHECK (STATUS_DATE is not null) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "STA_OPER_STATUS_NN" CHECK (OPER_STATUS is not null) DEFERRABLE INITIALLY DEFERRED DISABLE,
     CONSTRAINT "STA_OPER_STATUS_CK" CHECK (OPER_STATUS IN ('AC','UC', 'TA', 'PA', 'AN', 'PW' )) DEFERRABLE INITIALLY DEFERRED DISABLE,
     CONSTRAINT "STA_WELL_TYPE_NN" CHECK (WELL_TYPE is not null) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "STA_PK" PRIMARY KEY ("STA_PK") DEFERRABLE INITIALLY DEFERRED ENABLE
ALTER TABLE "WELL_STATUS" ADD CONSTRAINT "WELL_STATUS_CON_FK" FOREIGN KEY ("WEL_FK")
     REFERENCES "WELL" ("WEL_PK") ON DELETE CASCADE ENABLE
CREATE INDEX "STA_PK" ON "WELL_STATUS" ("STA_PK")
CREATE OR REPLACE TRIGGER "WELL_STATUS_STA_PK"
BEFORE INSERT ON "WELL_STATUS"
FOR EACH ROW
BEGIN
SELECT "STA_PK_SEQ".NEXTVAL INTO :NEW.sta_pk FROM DUAL;
END;
ALTER TRIGGER "WELL_STATUS_STA_PK" ENABLE
For the PERMIT table-----
CREATE TABLE "PERMIT"
(     "PER_PK" NUMBER(8,0) NOT NULL ENABLE,
     "WEL_FK" NUMBER(8,0),
     "DELFLAG" VARCHAR2(1) DEFAULT 'N',
     "NUM_AOR_WELL" NUMBER(6,0),
     "AUT_STATUS" VARCHAR2(2) DEFAULT 'RA',
     "AUT_STATUS_DATE" DATE DEFAULT sysdate,
     "OWNERSHIP_TYPE" VARCHAR2(2) DEFAULT 'PB',
     "SUBMISSION_DATE" DATE,
     "PER_STATE_UK" VARCHAR2(4) DEFAULT '09DI',
     "REQUIRED_YN" VARCHAR2(1) DEFAULT 'N',
     "LAST_UPDATE" DATE DEFAULT sysdate,
     "USERNAME" VARCHAR2(16) DEFAULT user,
     CONSTRAINT "PER_AUT_STATUS_CK" CHECK (AUT_STATUS IN ('IP', 'AP', 'GP', 'EP', 'RA', 'NO' )) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "PER_AUT_STATUS_NN" CHECK (AUT_STATUS is not null) DEFERRABLE INITIALLY DEFERRED ENABLE,
     CONSTRAINT "PER_OWNERSHIP_TYPE_CK" CHECK (OWNERSHIP_TYPE IN ('PB', 'PN', 'PF','FG', 'OI','OS', 'OT', 'PV', 'OR' )) DEFERRABLE INITIALLY DEFERRED DISABLE,
     CONSTRAINT "PER_PER_STATE_UK_CK" CHECK (PER_STATE_UK IN ('09DI', 'CAOC', 'GUEA', 'MPEQ', 'NVEP', 'NNUI' )) DEFERRABLE INITIALLY DEFERRED DISABLE,
     CONSTRAINT "PER_PER_STATE_UK_NN" CHECK (PER_STATE_UK is not null) DEFERRABLE INITIALLY DEFERRED DISABLE,
     CONSTRAINT "PER_REQUIRED_YN_CK" CHECK (REQUIRED_YN IN ('Y', 'N')) DEFERRABLE INITIALLY DEFERRED DISABLE,
     CONSTRAINT "PER_REQUIRED_YN_NN" CHECK (REQUIRED_YN is not null) DEFERRABLE INITIALLY DEFERRED DISABLE,
     CONSTRAINT "PER_PK" PRIMARY KEY ("PER_PK") DEFERRABLE INITIALLY DEFERRED ENABLE
ALTER TABLE "PERMIT" ADD CONSTRAINT "PERMIT_CON_FK" FOREIGN KEY ("WEL_FK")
     REFERENCES "WELL" ("WEL_PK") ON DELETE CASCADE ENABLE
CREATE INDEX "PER_PK" ON "PERMIT" ("PER_PK")
CREATE OR REPLACE TRIGGER "PERMIT_PER_PK"
BEFORE INSERT ON "PERMIT"
FOR EACH ROW
BEGIN
SELECT "PER_PK_seq".NEXTVAL INTO :NEW.per_pk FROM DUAL;
END;
ALTER TRIGGER "PERMIT_PER_PK" ENABLE
THESE ALL ARE TABLE STRUCTURE

SCCM 2012 R2 Client only showing 2 items under Actions

I've enable AD Forest Discovery on Primary Site also checked Automatically create AD site boundaries when they are discovered and Automatically create IP address range boundaries for IP subnets when they are discovered.
I didn't change this (default) Disable AD Forest Discovery on CAS.
I am still running SCCM 2007 R3 SP2 in Production environment. Do I need to remove all the boundaries first on SCCM 2007? Before I could install SCCM 2012 R2 client?
The reason that I manually install SCCM 2012 R2 client to my test computers just want to see if the SCCM 2012 R2 client will install without any issues. Right now, there's :(
On my Client Push Installation Properties, I haven't Enable automatic site-wide push installation. I just don't want SCCM 2012 R2 client is automatically pushing it out. Should I enable this? Is there any effect?
Two nights ago, I manually deploy SCCM 2012 R2 client (right click to deploy SCCM Client) to my test Win7x64 Enterprise and Win8.1x64 Enterprise. Until this morning Actions are not fully there (it should be total 11)
SCCM 2012 R2 client (version 5.00.7958.1000) installed but SCEP 2012 is not install (I think there's a problem here) since I checked the Actions button on both of Win7x64 Enterprise and Win8.1x64 Enterprise are only showing 2 Actions:
1. Machine Policy Retrieval & Evaluation Cycle
2. User Policy Retrieval & Evaluation Cycle
I've checked on both of Win7x64 Enterprise and Win8.1x64 Enterprise logs (using CMTrace):
1. CcmExec.log -> no errors
2. LocationServices.log -> Current AD site of machine is Default-First-Site-Name
3. ClientLocation.log -> It knows my new MP (correct one)
4. ClientIDManagerStartup.log -> with errors below
ClientIDManagerStartup.log has lots of RED errors (same one):
<![LOG[RegTask: Failed to send registration request message. Error: 0x8000000a]LOG]!><time="11:26:13.695+420" date="07-03-2014" component="ClientIDManagerStartup" context="" type="3" thread="1716"
file="regtask.cpp:1297">
I am hoping someone will be able to point me to the right direcly, please. Thanks, Reza
Reza Prawirasatya

Idan,
Thanks for the info.
I have check this registry below:
Check in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Mobile Client
It's pointing to my new site code of SCCM 2012 R2 (it's not SCCM 2007 site code).
What I did wrong I deploy SCCM 2012 Client Custom Settings to a collection that I created and also Antimalware Policies to that collection as well where that collection has 0 (none members).
So I deleted and just simply pointed both SCCM 2012 Client Custom Settings and Antimalware Policies to All Systems and all my test computers (workstations & servers) have SCCM 2012 R2 client along with SCEP 2012.
I have more questions below:
What's the best way for me to approach this SCCM 2012 R2 Client push to a test computers (workstations and servers).
I have SCCM 2007 R3 SP2 is still running in Production, currently Boundaries set as IP subnet (not using AD Site, it used but I changed it 2 years ago).
Now, SCCM 2012 R2 Primary Site set Enable AD Forest Discovery with Automatically create AD & Automatically create IP address range boundaries for IP subnets.
Of course, by turning this option above, it will pick up lots of different IP subnets. Even the one our sister company (lots of different domain).
1. In SCCM 2012 R2 Boundary Groups, I set Default-First-Site-Name (AD Site), under Site Systems tab, I have also my Primary Site SCCM 2012 R2 here.
Here's the questions:
1. Do I need to add IP subnet in SCCM 2012 R2 Boundary Groups? Do I need to add let's say 10.xxx.20.xxx (IP subnet here).
2. Also, do I need to delete IP subnet in SCCM 2007 Boundaries that correspond to that IP subnet? Let's say I have 10.xxx.20.xxx (IP subnet here) and remove this one since I have added on number 1?
Reza Prawirasatya

Accounts being created with administrative group rights

Hello,
The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes. It runs Hsphere control panel. I am trying to identify how the following hack is happening.
1) There are users being created with Administrative group rights.   Below is the EventViewer log for the user creation:
User Account Created:
    New Account Name:    username
    New Domain:    PCNAME
    New Account ID:    PCNAME\username
    Caller User Name:    PCNAME$
    Caller Domain:    DOMAINNAME
    Caller Logon ID:   (0x0,0x3E7)
    Privileges       -
Attributes:
    Sam Account Name:    username
    Display Name:   <value not set>
    User Principal Name:   -
    Home Directory:   <value not set>
    Home Drive:   <value not set>
    Script Path:   <value not set>
    Profile Path:   <value not set>
    User Workstations:   <value not set>
    Password Last Set:   <never>
    Account Expires:   <never>
    Primary Group ID:   513
    AllowedToDelegateTo:   -
    Old UAC Value:   0x2DAB2B0
    New UAC Value:   0x2DAB2B0
    User Account Control:   -
    User Parameters:   <value not set>
    Sid History:   -
    Logon Hours:   <value changed, but not displayed>
There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
2) I tried to identify what Caller Logon ID:   (0x0,0x3E7) means. I found out from here:
http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
Output from LogonSessions.exe is pasted below (snippet):
[0] Logon session 00000000:000003e7:
    User name:    DOMAINNAME\PCNAME$
    Auth package: NTLM
    Logon type:   (none)
    Session:      0
    Sid:          S-1-5-18
    Logon time:   9/11/2014 12:41:53 PM
    Logon server:
    DNS Domain:
    UPN:
        4: System
      316: smss.exe
      364: csrss.exe
      392: winlogon.exe
      440: services.exe
      452: lsass.exe
      628: svchost.exe
      756: LMAgent.exe
      840: svchost.exe
     1000: spoolsv.exe
     1252: avagent.exe
     1268: camWMIAgent.exe
     1324: cissesrv.exe
     1380: cpqrcmc.exe
     1404: vcagent.exe
     1440: svchost.exe
     1480: HsQuotas.exe
     1740: inetinfo.exe
     1780: EmailAgent.exe
     1856: snmp.exe
     1884: sysdown.exe
     1920: smhstart.exe
     2192: svchost.exe
     2388: cmd.exe
     2396: hpsmhd.exe
     2444: cqmgserv.exe
     2464: cqmgstor.exe
     2484: HSphere.exe
     2596: wmiprvse.exe
     2676: cmd.exe
     2684: rotatelogs.exe
     2692: cmd.exe
     2700: rotatelogs.exe
     2732: searchindexer.exe
     2812: hpsmhd.exe
     2824: cqmghost.exe
     2852: svchost.exe
     3044: cmd.exe
     3052: rotatelogs.exe
     3080: cmd.exe
     3088: rotatelogs.exe
     5452: svchost.exe
     5596: GravitixService.exe
     7392: csrss.exe
     7232: winlogon.exe
     6888: csrss.exe
     9832: winlogon.exe
    10388: wawrapper.exe
    10352: cpqnimgt.exe
     9496: msiexec.exe
     6068: w3wp.exe
     4748: webalizer.exe
3) I also learned from http://support.microsoft.com/kb/243330/en-us that Sid:          S-1-5-18 means:
SID: S-1-5-18
Name: Local System
Description: A service account that is used by the operating system
That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
The server is fully patched and it is running Lumension security product. What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
Hope someone with advanced admin skills can advise.
Thank you

Hi,
You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group. So no users with Administrative group should be ever created. If this happens,
it constitutes a breach of server security=positive hacking attempt.
>how in the world users are being created and then being assigned administrative group rights.
In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
I want to be able to understand in full how/what process is allowing users to be created with Admin rights. In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
it so that we can patch this particular hole.
Best Regards,
Amy

SMS - Text Messaging in S40 vs S60

Dear all,
I have two Nokia mobile phones, one is Nokia 6600 Fold that is based on regular S40 edition 6 OS and the other is Nokia E71 that is based on S60 edition 3. Both are wondurful phones, honestly.
My problem with theS60 based mobiles, which is meant for business in the first place, is in the text messaging. On the other hand, I don't have any problem in the text messaging in the S40. Simply, S40 has the ability to let you send a text message to the most recent people you’ve already sent a text message to. Besides, it allows you to also choose from the call log; recent poeply you've called or received calls from. S60 does not have this, I assume this feature as a competitive powerful business feature.
If you are in business, you sometimes want to send a message to some colleague who just called you, and his colleague as well where you'll pick from the contact list, then to some other manager who just send you a message on the same subject. I use this feature a lot, at least 10 SMS's a day. It's hectic to re-search all the contact list to add recepient while you can easily pick them from the menu in S40 based mobiles.
Does anyone know when Nokia is willing to add this feature to the S60 based mobiles, or any workaround that would ease my life with the S60's? :mansad:
Regards,
Stalwart

Thanks Balky, at last I found someone who could understand my pain.
Well, the AA would solve around 20% of the problem. I hope we see this feature in the S60 mobiles shortly. It's an awesome one that S40 already have regardless of its primitiveness compared to the S60. Anyway, i got a lovely comparison that lists what S40 have more than the S60, Here it is:
Nokia Video (French, but it is a must watch): S40 vs S60, the two operating systems that drive the b...
bye!

New infinity install or lack of it ?

Well where do I start from the beginning I suppose was with sky 4 years for phone broadband tv upgraded to fibre in jan 13 but nothing but problems due to poor speeds and congestion so managed to cancel within 3 month cooling off period so looked around for a better deal decided to for bt infinity 2 evening weekend calls £50 sainburys gift card and £20 for 3 months,which I ordered on 13 march for install on 28 march great! Until 2 days later found offer improved to £100 gift card contacted bt said cannot get the new offer unless cancel order and reorder but will put back my install date by another week so I left it as it was,
Bt home hub was delivered on the 26 two days before install great,then install day engineer booked between 8-1 pm around 8am phone goes dead off until around 11 then connected to bt but no 1571 call minder and no caller display which was ordered and confirmed by bt,gets to 12.30 no engineer phoned bt said he was behind due to weather but would call when he's on his way,waited another 2 hours still nothing phoned bt again they said engineer not coming now because the line was not connected at the time he was in the area,what? a joke they said that infinity cannot now be installed until next week due to this and that they needed to place a new order for call minder and caller display to be activated 4 April , I said this is not good enough and left me with no Internet they said that we will give you £40 credit on your bill and if you go out and buy a mobile Internet dongle until infinity is installed, what a joke! Told me to phone back Saturday to get a engineer booked once system is updated, well this was not what I was expecting from bt thought sky was bad but this is even worse think I have jumped out of the frying pan into the fire ! Well let's see if bt can deliver on speeds stated 55 down and 16 up when I finally get connected if not will be cancelling this so far terrible service !
Solved!
Go to Solution.

Hi Jaseb41,
Thanks for the post. I am sorry that you have been left without an Internet connection. Did you a get new engineers appointment confirmed? If no then I will be more than happy to get one booked ASAP.
Please drop me an email via the 'Contact Us' link in my profile. (click on my name and you will find the link under the "about me" section). Include your BT account details and the link to this thread.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Deployment Application To Weblogic Server Failed

Hello every body
I need your help in this problem please :
I'm using Oracle JDeveloper 11.1 in my local machine, I Installed Weblogic Server 10.3 on the server and it's works well, I made new JDBC connection in Weblogic Server and it's works well too.
I made new ADF Fusion web Application and I used the same connection that I used in Weblogic server and it's works well.
I made new Application Server Connection from my local machine and It's works well with my user account.
In my project I made new WAR deployment, Also I configured my Application properties to Bind Application to the Weblogic server Instance.
1-when I try to deploy my project to Weblogic server I get this error message :
Deploying Application...
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application test_webapp on AdminServer.: Failed to load webapp: 'test_webapp.war'.
weblogic.application.ModuleException: Failed to load webapp: 'test_webapp.war'
#### Deployment incomplete. #### Feb 15, 2009 12:18:01 PM
Deployment Failed
2-Another application was deployed before to Weblogic server, it seems running well, whereas Weblogic Server marks my deployment health as OK, but when I try to run it for test using this URL : http://serverIP:Port/Deployment Name, I get this Error : Error 403--Forbidden
What Should I do for both cases ?
Thanks a lot ...

Thanks Timo
But first I don't use any library at my project , this is last log in Weblogic Server logfile :
####<Feb 16, 2009 1:56:58 PM EET> <Warning> <DeploymentService> <D2KR2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <Osama> <> <> <1234785418343> <BEA-290008> <Deployment service servlet encountered while extracting uploaded file to directory ".\servers\AdminServer\upload\test_webapp". Exception is: "invalid distance code".>
Where D2KR2 is my Server Name
Osama is my user in Weblogic Server
test_webapp is the Application name
My problem didn't solved yet, and I'm new at JDeveloper ADF.
Where I can find clear information about deploying projects to Weblogic server.
Thank's Agin ...
Edited by: user8330337 on 15/02/2009 04:09 ص

Performance Issue when setting connection information

I am writing a Winforms application using VB.NET
I have developed a method that sets the Crystal Reports Connection.
This method first grabs the connection string from the config file creates a Crystal Reports ConnectionInfo object.
The following code then takes over 5 seconds to run:
Dim myTables As Tables = report.Database.Tables
Dim myTableLogonInfo As TableLogOnInfo = New TableLogOnInfo()
myTableLogonInfo.ConnectionInfo = myConnectionInfo
Then this code takes over 6 seconds to run:
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
myTable.ApplyLogOnInfo(myTableLogonInfo)
    myTable.LogOnInfo.ConnectionInfo.DatabaseName = myTableLogonInfo.ConnectionInfo.DatabaseName
    myTable.LogOnInfo.ConnectionInfo.ServerName = myTableLogonInfo.ConnectionInfo.ServerName
    myTable.LogOnInfo.ConnectionInfo.UserID = myTableLogonInfo.ConnectionInfo.UserID
    myTable.LogOnInfo.ConnectionInfo.Password = myTableLogonInfo.ConnectionInfo.Password
Next
This only occurs the first time that the form is loaded, the subsequent times it is
335ms (as compared to 5349ms) and 52ms (as compared to 6228ms)
However, when the application is reloaded the same slow times re-occur.
There are not many different tables in my report generally 3 or less. Only 1 table in this case.
This is currently in test and VS2008 and SQLServer2005 are both running locally. The same issue does occur in the QA environment as well, where the application is run on the client and the database is on a server on the same LAN.
So my question is, can I improve the speed of this portion of code? Why does it take so long to set the report connection information? Am I doing connections to the report incorrectly?
Any ideas?
Thanks,

This is an expected behavior. First time the code is run, the app loads all the CR runtime; assemblies, dlls, COM dlls, etc., etc. Once these are in memory, the performance improves significantly. For more details and possible work-arounds, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b] article.
Ludek

Using a custom itemrenderer in datagrid to update value in the same row but different column/cell

Here's what I have so far. I have one datagrid (dg1) with enable drag and another datagrid (dg2) with dropenabled. Column3 (col3) of dg2 also has a custom intemrenderer that's just a hslider.
When an item from dg1 is dropped on dg2, a custom popup appears that asks you to use the slider in the popup to set a stress level. Click ok and dg2 is populated with dg1's item as well as the value you selected from the popup window. I was also setting a sliderTemp variable that was bound to the itemrender slider to set it but that's obviously causing issues as well where all the itemrenderer sliders will change to the latest value and I don't want that.
What is needed from this setup is when you click ok from the popup window, the value you choose from the slider goes into dg2 (that's working) AND the intemrenderer slider needs to be set to that value as well. Then, if you used the intemrenderer slider you can change the numeric value in the adjacent column (col2).   I just dont know how to hook up the itemrenderer slider to correspond with that numeric value (thatds be in col2 on that row);
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" minWidth="955" minHeight="600"
                    xmlns:viewStackEffects="org.efflex.mx.viewStackEffects.*" backgroundColor="#FFFFFF" creationComplete="init(event)"
                    xmlns:components="components.*" xmlns:local="*">
     <mx:Script>
          <![CDATA[
               import mx.binding.utils.ChangeWatcher;
               import mx.collections.ArrayCollection;
               import mx.controls.Alert;
               import mx.controls.TextInput;
               import mx.core.DragSource;
               import mx.core.IUIComponent;
               import mx.events.CloseEvent;
               import mx.events.DataGridEvent;
               import mx.events.DragEvent;
               import mx.events.FlexEvent;
               import mx.events.ListEvent;
               import mx.events.SliderEvent;
               import mx.events.SliderEventClickTarget;
               import mx.managers.DragManager;
               import mx.managers.PopUpManager;
               import mx.utils.ObjectUtil;
               [Bindable]private var myDP1:ArrayCollection;
               [Bindable]private var myDP2:ArrayCollection;
               [Bindable]public var temp:String;
               [Bindable]public var slideTemp:Number;
               private var win:Dialog;
               protected function init(event:FlexEvent):void{
                    myDP1 = new ArrayCollection([{col1:'Separation from friends and family due to deployment'},{col1:'Combat'},{col1:'Divorce'},{col1:'Marriage'},
                         {col1:'Loss of job'},{col1:'Death of a comrade'},{col1:'Retirement'},{col1:'Pregnancey'},
                         {col1:'Becoming a parent'},{col1:'Injury from an attack'},{col1:'Death of a loved one'},{col1:'Marital separation'},
                         {col1:'Unwanted sexual experience'},{col1:'Other personal injury or illness'}])
                    myDP2 = new ArrayCollection()
               protected function button1_clickHandler(event:MouseEvent):void
                    event.preventDefault();
                    if(txt.text != "")
                         Alert.yesLabel = "ok";
                         Alert.show("", "Enter Stress Level", 3, this,txtClickHandler);
               private function image_dragEnter(evt:DragEvent):void {
                    var obj:IUIComponent = IUIComponent(evt.currentTarget);
                    DragManager.acceptDragDrop(obj);
               private function image_dragDrop(evt:DragEvent):void {
                    var item:Object = dg2.selectedItem;
                    var idx:int = myDP2.getItemIndex(item);
                    myDP2.removeItemAt(idx);
               protected function dg1_changeHandler(event:ListEvent):void
                    temp=event.itemRenderer.data.col1;
               protected function dg2_dragDropHandler(event:DragEvent):void
                    event.preventDefault();
                    dg2.hideDropFeedback(event as DragEvent)
                    var win:Dialog = PopUpManager.createPopUp(this, Dialog, true) as Dialog;
                    win.btn.addEventListener(MouseEvent.CLICK, addIt);
                    PopUpManager.centerPopUp(win);
                    win.mySlide.addEventListener(Event.CHANGE, slideIt);
               private function txtClickHandler(event:CloseEvent):void {
                    trace("alert");
                    if (event.detail==Alert.YES){
                         myDP2.addItem({label:temp});
               private function addIt(event:MouseEvent):void{
                    myDP2.addItem({col1:temp, col2:slideTemp})
               private function slideIt(event:SliderEvent):void{
                    slideTemp = event.target.value;
          ]]>
     </mx:Script>
               <mx:Panel x="10" y="10" width="906" height="481" layout="absolute">
                    <mx:Image x="812" y="367" source="assets/woofie.png" width="64" height="64" dragDrop="image_dragDrop(event);" dragEnter="image_dragEnter(event);"/>
                    <mx:DataGrid x="14" y="81" width="307" height="251" dragEnabled="true" id="dg1" dataProvider="{myDP1}" wordWrap="true" variableRowHeight="true" change="dg1_changeHandler(event)">
                         <mx:columns>
                              <mx:DataGridColumn headerText="Examples of Life Events" dataField="col1"/>
                         </mx:columns>
                    </mx:DataGrid>
                    <mx:DataGrid x="329" y="81" height="351" width="475" dragEnabled="true" dropEnabled="true" id="dg2"
                                    wordWrap="true" variableRowHeight="true" dataProvider="{myDP2}" editable="true"
                                    dragDrop="dg2_dragDropHandler(event)" rowHeight="50" verticalGridLines="false" horizontalGridLines="true" >
                         <mx:columns>
                              <mx:DataGridColumn headerText="Stressor" dataField="col1" width="300" wordWrap="true" editable="false">
                              </mx:DataGridColumn>
                              <mx:DataGridColumn headerText="Stress Level" dataField="col2" width="82" editable="false"/>
                              <mx:DataGridColumn headerText="Indicator" dataField="col3" width="175" paddingLeft="0" paddingRight="0" wordWrap="true" editable="false">
                                   <mx:itemRenderer>
                                        <mx:Component>
                                             <components:Compslide/>
                                        </mx:Component>
                                   </mx:itemRenderer>
                              </mx:DataGridColumn>
                         </mx:columns>
                    </mx:DataGrid>
                    <mx:Text x="14" y="10" text="The first category of underlying stressors is called Life Events. The list includes both positive and negative changes that individuals experience. Both can be stressful. For example, becoming a parent is usually viewed as a positive thing, but it also involves many new responsibilities that can cause stress. " width="581" height="73" fontSize="12"/>
                    <mx:TextInput x="10" y="380" width="311" id="txt"/>
                    <mx:Text x="10" y="335" text="Add events to your list that are not represented in the example list. Type and click "Add to List"
" width="311" height="51" fontSize="12"/>
                    <mx:Button x="234" y="410" label="Add to List" click="button1_clickHandler(event)"/>
               </mx:Panel>
</mx:Application>

how do i go about doing that? do i put a change event function in the itemrenderer? and how would i eventually reference data.col2?

Well, where is it???

Similar Messages

Maybe you are looking for