Went to go redeem os x lion and says my code is invalid...im stuck Help?
I got OS X Lion for free... when i purchased it, there were 3 steps and it said to redeem it and i did but it said my code is invalid. Help plz!
Found the answer!!
I'm using a web interface and missed the attachment icon.
As soon as I opened the attached PDF, it required a code to open the attached PDF!! Once I opened the PDF using the content code, my APP store code was inside.
And it is now working!!
Hope this helps you LoganTM
Similar Messages
-
I have redeemed a gift card and says the code was not properly activated what do i do?
i have redeemed a gift ccard and it said the card was not activated properly what do i do
Are you able to take the card back to the store that you bought it from and ask them to activate it properly ? If not then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
Trying to redeem my digital copy of Star Trek, the movie, and iTunes tells me I've already redeemed it, or the redemption code is invalid. Any help woud be greatly appreciated
You don't say which film you're struggling to download, I had problems with a-team and I ended up emailing the address on the leaflet, turns out they had a lot of problems with people's codes, they then gave me a new code to use! I have now managed to get the film downloaded?
-
Hello,
I have mac os x, version 10.6.3 in my macbookpro and i want to update to os x lion and could use I cloud, so could you help me to do it because I have already done like it says here and inthe middle cut the downloading so couldn't, thanks, marianoIf you have 10.6.3 you need to update to 10.6.8 first. So, http://support.apple.com/kb/DL1399
-
i just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk
It sounds like your hard drive either has a software problem that Disk Utility cannot fix or that the HD has failed (mechanically).
Your Mac may have booted either to your recovery partition or to internet recovery in an attempt to repair the drive- I can't tell from your post.
I'll assume that it was the recovery partition.
Try to boot into internet recovery (hold down option command R at restart), and see if you can repair your HD with Disk Utility. You should also repair permissions while you're there.
If that doesn't work, try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
If that doesn't work you have a few options:
If your mac originally came with installation disks, you can try to boot from the installation disk and then see if you can repair the HD.
There is a small chance that Techtool Pro 7 will be able to repair your HD if Disk Utility can't.
If none of that works then your HD has probably failed and will need to be replaced, which is not too difficult to do yourself if you can use a screwdriver. -
my niece gave me her old ipod touch 8GB and her passlock code. It is stuck in the "connect to itunes" mode and won't let me even access the slide to unlock. How do I fix??
You will need to Restore it as a New Device...
Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Apple store worked great, now it keeps telling me that I need to verify payment info and my security code is invalid for my card... The card is current? What's going on?
Did you enter the last three digits on the back of the card for Visa or Master or the 4 digit # on the front of Amex?
-
HT201303 My apple ID is locked and say go contact support to unlocked need help ?
My Apple ID is locked and say go contact support to unlocked need help?
You can contact iTunes support via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
-
when i download the windows support it stops in the middle of the bar and says; Device appears to be offline. HELP ME OUT!!
Try downloading from here http://www.apple.com/support/bootcamp/downloads/
Is your device correctly formatted in accordance with the Bootcamp Installaion Instructions? -
updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?
It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
Here's a thread that helped me with iPhoto:
https://discussions.apple.com/thread/4794375?start=0&tstart=0 -
Updated to Mountain lion, and now iPhoto & iMove don't work. Help!
I updated to Mointain Lion, and now my iPhoto & iMove don't work. I would rather not have to pay for them AGAIN..
The error i get is "You can't open the application 'iPhoto' because thr PowerPC applications are no longer supported"
Any help greatfully recievedYes.
Current iPhoto is 9.4.3.
Current iDVD is 7.1.2
Current iMovie is 9.0.9
You can either buy iLife 11 which will update or download from the App Store, which doesn't have iDVD. -
Yes Im a lot of a novice so be patient with me lol I am trying to put a 2006 Edition of a weight programme on my laptop, but when I down load it it just comes up in weird script and says cannot operate in Dos mode can anyone help.
ThanksWelcome to Apple Support Communities.
Sounds like you have a program designed to run on Microsoft Windows, or even older (1980's) MS-DOS, rather than Mac OS X. If you have Windows on your Mac installed via Boot Camp, try booting into Windows first, and then loading the CD. If you don't have Windows, it's probably cheaper to buy a new program designed for Mac than to purchase a copy of Windows (US$120 or more), not even knowing for certain if your old program will run. -
I am trying to re-able my disabled iPod. It is a 4th Generation iPod touch 8gb. It has a crack screen and the lock/sleep button and the volume buttons do not work. It says in red ribbon on the top of the screen, "iPod is disabled Connect to iTunes". When I connect it to iTunes it doesn't show up in the left sidebar. Instead a message pops up and says, "iTunes could not connect to the iPod 'Madyz iPod' because it is locked with a passcode. You must enter you passcode on the iPod before it can be used with iTunes." What do I do? I would really appreciate help.(: thanks.
If you can't enter the passcode then you have to place the iPod in recovery mode and then restore the iPod via iTunes. For ecovery mode see:
iPhone and iPod touch: Unable to update or restore
Note that this requires using the sleep/wake button. If you are not successful then there is nothing else that I know you can do. -
Trying to download free photoshop and received error code 148:3 can you help
Need help tying to download free photoshop and receiving error code 148:3
Something is preventing the licensing from working. Make sure to run with sufficient user privileges and file permissions.
Mylenium -
I bought a creative suite 2 student addition on ebay with coupon code but this code is invalid.How can I register this software and get a serial nr?
CS2 is a very old version and Adobe has stopped shipping it since ages.
Buy the new Adobe CS6 or contact the reseller from where you bought this software.
Note : Adobe now offers month-to-month and one-year subscriptions for most individual CS6 applications. In addition, Adobe now offers membership in Adobe Creative Cloud, which gives users ongoing access to most Creative Suite applications. This means you can continue to use your application on a month-by-month basis for a fraction of the full purchase price. Learn more about CS subscription editions.
Maybe you are looking for
-
Hi, Two problems here guys 1. My iTunes won't sync. Since the update to iTunes 11 it refuses to transfer purchaces from my iPhone 4S and won't put stuff from my phone into my iTunes library and I can't put anything on my phone through my laptop. Both
-
AVCHD - How to import from my camera?
I got a Sony CX-12 camcorder that records movies in full HD, an amazing image quality. But when I import the movies from the camera the files become incredibly large... And when I export the movie from iMovie08 the image quality is so poor... By this
-
Powerview modifying a calculated measure in SSAS cube
We are running SQL Server 2012 and Sharepoint 2013 we are having problems with Powerview modifying a calculated measure in the underlying multidimensional cube. We have a powerview report with multiple pages that allows a user to utilize a global fil
-
How to make sub-categories in iTunes playlists
I have many playlists for separating certain types of music, like most people do. I was wondering if there is a way to place sub-categories in playlists already made. For example: iTunes>Playlists>Recently Added>10 Most Recently Added>5 Most R
-
LOV Query --- Urgent Please Help
Is there any way to hide the %sign from the top field of LOV If not, then any way to hide that field, but not affecting its working and functionality...... Please do reply me if you know something Thanx in advance