WEP Key for registering XP to use Airport connection?

In my Windows XP partition, the computer recognizes my Airport card, and can access the hardware; however, it's not allowed to connect with my ordinary password, rather it's calling for a multi-digit "WEP Key" - How do I figure out what my WEP Key is to allow it access?

Hi John,
Go to Applications-Utilities-Airport Admin Utility,
and click to open. Highlight your base station and
double click to open the preference window. In the
toolbar at the top of the window, click on Password.
In the drop down you will see the Hex equivalent
password (WEP key). This is the number you need to
enter in XP.
Thanks much!

Similar Messages

  • How do you find the wep key for the wifi?

    I need the WEP key to be able to acess my wifi through my playstation. And i am unsure of which operating system to choose i know i have the most up to date one though

    Is the Wi-Fi network, provided by your AirPort Extreme, configured for WEP wireless encryption? If not, and is using WPA or WPA2 instead, then the Playstation is not properly recognizing the security type.
    Which exact version of the Extreme do you have?
    By operating system, are you referring to the one you are running on your computer? Is so, what is the make & model of your computer?

  • How do i find WEP key for wrt54g

    Hi, my husband set up our system and i am trying to add a new wireless printer. He is out of the country for business, hence my problem. How do i find what the WEP key/ network key is? Thank you for your help.

    If you have other computer which had connected to this wireless network before, probably you can also use this wireless key finder on that computer to locate the WEP encryption key.
    Hope this helps.

  • Can't set WEP key for broadcom-wl?

    I did a fresh install of Arch this morning at my office. I have an Acer Aspire laptop with a Broadcom wireless card that works with broadcom-wl (I've used the driver for a long time and it works perfectly... with open or WPA networks). The network at my office is WEP. So after installing the drive, adding lib80211 and wl to my MODPROBE (and !b43 !ssb), I reboot and see my wireless as eth0.
    If I try to iwconfig eth0 key XXXX-XXXX-XX or iwconfig eth0 essid WIFINAME key XXXX-XXXX-XX, no matter what combination I try, I get an error saying that it's an invalid argument for SET_ENCODE. I've check the Wiki and man pages for iwconfig, and can't seem to find any solution. Does anyone know why I can't put in a WEP key?
    ((Side note: everytime I've installed Arch, my wifi starts out as eth0 until I get connected and run pacman -Syu. Then I reboot and it shows up as wlan0, and my Atheros ethernet is eth0 or eth1.))

    Thanks for a response. So this is a fresh-from-the-oven install. I usually get my wifi connection set up and then create my user and go about setting everything else up. Meaning I've been trying as root.
    I can see the wireless network with iwlist scan and it shows up as encryption key: on. Also, I tried using each lib80211 mod or some combination thereof in my rc.conf. No dice.
    Lastly, since I didn't include it before, here's the exact error I get when I try to assign a WEP key with iwconfig:
    Error for wireless request "Set Encode" (8B2A) :
    SET failed on device eth0; Invalid argument.
    UPDATE: I can set the key using [x] between key and XXXXXXXXXX. However, any combination I'm trying of essid and key/enc isn't showing up in iwconfig. No errors, but my iwconfig information isn't changing. It's progress... I think.
    UPDATE #2: I can iwconfig eth0 essid linksys (the office next to us) and grab that one (I don't know their password ) and it updates iwconfig, but our own network doesn't update iwconfig when I run iwconfig essid. >.<
    Last edited by mtcupps (2011-06-17 18:20:02)

  • To set the short cut key for the menu when using CommandDesign pattern

    Hi All
    I have a menu File which has two menu items Load and save.
    Here for implementing the actionperformed iam using the command design pattern.
    Now iam not able to set the short cut key for the menu item......
    Please help me..............
    Thanks
    Arch

    The Java Tutorials: [How to Use Menus|http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html]
    db

  • I have an hp wireless d110a printer how can i get another wep key for it to set it up?

    Have a new HP d110a wireless printer how do i get or put in another key that it will take to finish setting it up to work? I need help. I had one of these before,and had to send it back, and HP sent me another one just like it. It will not take anything i put in it. How do i fix this. I went through all the steps, and it still does not take anything. Need help.

    Hi,
    Only you (or relatives) know your WEP key, it should be in your access point (AP), you can logon to it and check this out.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • N8, unable to enter full WEP key for WLAN

    I have a 28 character WEP key, but my N8 seems to be limiting me to 26 characters. I've tried it a couple of times & still the same, am I imagining it???
    Any way round this?
    Nokia N8 on Belle

    there isn't a limit of 26 there unless maybe you need an update but i'd try resetting your device first, i've just had a look and i got over 30 characters before i stopped

  • Using Airport connection to send faxes

    Wanted to know if it is possible to send a fax using Airport. I am all connected for printing but can't work out how to send a fax other than plugging the modem into a telephone line. Thanks

    You cannot use the Airport Base Station as a faxmodem. You need to plug your Powerbook's own built in faxmodem to a telephone line.

  • WEP key for Cisco 2100

    Hi
    I am having a lot of trouble trying to set a WEP, or any other key. When I am visiting 192.168.100.1 there is no option for log in or anything, only observe. The pages 192.168.0.1, 192.168.1.1 & 192.168.2.1 also time out every time. When I ping, these 3, it continuously times out too. It has been like that for some days. I have had this modem for around a year but only recently wanted to set up Wifi through a USB adapter and discovered this problem. I'm using windows 7, tried some drivers but they didn't help or weren't even compatible. PLease, can somone tell me how to get my WEP etc key so I can get this set up before Xmas?
    Edit: I have so far tried every suggestion from my ISP & information posted on the internet and nothing helped

    Hi,
    you should be able to access the controller by the following way:-
    Step 1 Connect your PC to the service port and configure it to use the same subnet as the controller (for example, 192.168.10.1).
    Step 2 Start Internet Explorer 6.0 SP1 (or later) or Firefox 2.0.0.11 (or later) on your PC and browse to http://192.168.1.1. The configuration wizard appears.
    it is possible that the issue is windows 7 which you are using. Please check with XP or any other machine to make sure windows 7 is not causing the issue. Please check the config guide for step by step access:-
    http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70intf.html#wp1142477
    Once you are able to access the controller, then you can setup WEP:-
    http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70sol.html
    thanks,
    Vinay
    If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

  • Accessing wireless for a dell computer using airport express

    I use my macbook with my wireless network using an airport express base in my home. My guest wants to pick up the wifi in my house. His Dell computer doesn't pick up the wifi. His tech guy says the problem is the airport express base. My mac book picks up wifi great. Can more than one user get wifi with an airport base? Is there an incompatibility problem with a dell laptop not being able to get the wifi? I do not speak tech language at all and would appreciate any help. Thanks.

    Hello cynthia Morton. Welcome to the Apple Discussions!
    Can more than one user get wifi with an airport base?
    Yes, the AirPort Express Base Station (AX) can support up to 10 concurrent wireless devices at the sae time.
    Is there an incompatibility problem with a dell laptop not being able to get the wifi?
    The AX is a standard 802.11b/g wireless router, or if you have the newer model, it will also support 802.11n devices. Most Dells that are wireless capable, should support these same standards.
    Are you running wireless encryption (WEP, WPA or WPA2) on your AX? What is the operating system on his Dell laptop? Windows XP or Vista? If it is XP, which Service Pack level ... SP1, SP2, or SP3?

  • How can I change a wep key for a previous wifi

    I have a previously saved wireless, but i dont know how to edit the settings and change them, like the wep key

    Hello w:
    I think an Apple store would be the best approach.
    Barry

  • Setting WEP key in DOS

    I am trying to find a way to store the WEP key in DOS on a machine. I have the CSCODI drivers loading just fine. However to get into our network login screen in dos here. we have to have the wep key stored.
    I am using the Aeornet 350 PCI card, and whenever I try to run wepdos to get / store the information, I receive an error 8003: IO ports inaccessable.
    How would I go about getting around this?
    Thanks!

    I had this same type of problem a while ago. The Cisco DOS drivers require some type of PCMCIA card and socket service to be running. This support is not native to your PC BIOS and needs to be included in your config.sys file. Check w/ your PC vendor to see if they've provided DOS card services for your machine.
    thanks

  • N8 How to change WEP key

    I have typed in a wrong WEP key for a WLAN network
    So when I try to use that WLAN Network, it will show connected but I cannot surf at all.
    How can I change the WEP key ?
    Solved!
    Go to Solution.

    Settings>Connectivity>Settings>Destinations>Internet>YOUR CONNECTION>WLAN Security settings>WEP key settings>WEP Key
    Easy?!

  • You must register your tables using JDDI before you request them

    Hey Guys....
    I'm trying to query a custom table created on a SQL Server 2005 database, the same RDBMS for the SAP Web AS. I'm using a different database from the sytem's standard.
    I created a Datasource for it. I can get the connection, but when I execute a query I get the following message.
    Please note that I used everything SAP recommends for JDBC connector. I have done this previously for an oracle database but this time this approach (MS SQL) is not working...
    I don't understand what it means for registering the tables using JDDI.
    Could you please show me some light?
    java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseRemoteException: SQL statement(s) cannot be executed over DataSource "ZPORTAL". If you are using an Open SQL DataSource, you must register your tables using JDDI before you request them. Reason: java.sql.SQLException: [NWMss][SQLServer JDBC Driver][SQLServer]Invalid object name 'BC_DDDBTABLERT'. [id = Unknown]
         at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.executeFromAppThread(DataSourceManagerImpl.java:1201)
         at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.executeInitStatements(DataSourceManagerImpl.java:532)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
         at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
         at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
         at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
         at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:409)
         at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.invoke(BasicMBeanServerInterceptor.java:277)
         at com.sap.jmx.provider.ProviderInterceptor.invoke(ProviderInterceptor.java:258)
         at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
         at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
         at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:131)
         at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:212)
         at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:766)
         at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
         at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
         at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
         at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
         at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: java.sql.SQLException: [NWMss][SQLServer JDBC Driver][SQLServer]Invalid object name 'BC_DDDBTABLERT'.
         at com.sap.dictionary.database.catalog.XmlCatalogReader.getTable(XmlCatalogReader.java:98)
         at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:126)
         at com.sap.sql.catalog.impl.BufferedCatalogReader.getTable(BufferedCatalogReader.java:89)
         at com.sap.sql.sqlparser.CheckColAndTabVisitor.checkTabs(CheckColAndTabVisitor.java:247)
         at com.sap.sql.sqlparser.CheckColAndTabVisitor.performCatalogChecks(CheckColAndTabVisitor.java:170)
         at com.sap.sql.sqlparser.CommonSQLStatement.checkSemantics(CommonSQLStatement.java:184)
         at com.sap.sql.jdbc.common.StatementAnalyzerImpl.check(StatementAnalyzerImpl.java:42)
         at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:126)
         at com.sap.sql.jdbc.common.StatementAnalyzerImpl.preprepareStatement(StatementAnalyzerImpl.java:109)
         at com.sap.sql.jdbc.common.CommonStatementImpl.execute(CommonStatementImpl.java:217)
         at com.sap.engine.services.dbpool.wrappers.StatementWrapper.execute(StatementWrapper.java:167)
         at com.sap.engine.services.dbpool.deploy.DBInitializer.run(DBInitializer.java:69)
         ... 4 more

    I changed the SQL Engine parameter to "Vendor SQL" under Additional tab of my datasource configuration

  • How would I create a Summary Chart for the Current Year Using a Count by Month?

    Post Author: MarkS
    CA Forum: Charts and Graphs
    I have a data set of 3 date fields.  I would like to create a summary counting all of the occurrances of each of these dates per month, similar to using a SumProduct() command in excel.
    For example, my data is as follows:
    Registered Date  |    Application Date   |   Sale Date
    1/1/2007             |      2/1/2007            |     2/20/2007    
    1/10/2007           |      2/1/2007            |     3/20/2007
    2/20/2007           |      3/10/2007          |     3/20/2007
    I would like to summarize this information by month as follows:
                          |  Jan '07   |   Feb '07  |  Mar '07  |  TOTAL
    Registered      |      2        |   1           |    0         |   3
    Applications    |     0         |   2           |   1          |  3
    Sales             |     0         |   1            |  2            |  3
    TOTAL           |   2            |  4            |  3            | 9
    Is there any way to do this?

    Post Author: V361
    CA Forum: Charts and Graphs
    Yes, but it will require some effort. Group on "Sale Date"  Change the group to group by month.   You can then create a running total for "Registered Date","Application Date"," Sale Date"      For Registered date, I used Field to summarize Registered Date,  Type of summary was count, Evaluate use a formula, reset on change of group 1 (I only have one group, "Sale Date")  The formula will look like this.
    month ({Registered Date  }) in &#91;1,2,3,4,5,6,7,8,9,10,11,12&#93;
    You would build your other running totals (Counts) using the same methods,
    Once you have these, you should be able to create your chart.

Maybe you are looking for