WEP not working? TIVO Wireless

I have an Airport Express configured with WPA and it works fine. Now I"m trying to incorporate a TIVO Wireless system and it requires WEP. THe problem is that when I reconfigure the Airport to WEP, it loses it's connection (blinking amber light). Is there some other setting I must change for the Airport Express to work correctly configured for WEP? THanks!

Hi deco22 and welcome to Discussions,
Airport Express Lights
Try this:
Power Cycle your Airport Express. Just unplug the Airport Express from the power source wait 2 minutes and plug it back in.
if that doesn't work then
You might have to do a reset
Airport Express Reset
Hope this helps

Similar Messages

Home Sharing not working between wireless PC's / devices and ethernet wired PC's on the same router.

Home Sharing is not working between wireless PC's / devices and ethernet wired PC's on the same router. I installed a new Verizon FIOS ActionTec MI424WR GigE wireless / ethernet router, replacing the original FIOS router. With the old router Home Sharing worked fine across and among all iOS and Windows wired and wireless devices. With the new router Home Sharing works between and among the Wired PC's but not between the wired PC's and the Wireless connected PC's or iOS devices. Home Sharing also works between and among the wireless connected PC's and iOS decices but not between them and the wired PC's.
Only the router was changed. No changes were made to any of the devices except all were updated with the latest version of iTunes 10.7.0.21 and the iSO devices were updated to iOS vrsion 6.01. Three PC's are wired and all are running Windows 7. There also is a Windows Home Server connected to the router by ethernet port. It does not run iTunes but does provide WebDAV services to my iOS devices. This works fine. Two PC's are wireless, one running Windows 7 and one running Windows 8. All of the PC's are connected to the same (new) router via it's ethernet ports and it's wireless access point. Two of the wired PC's are connected via a high-speed ethernet hup that is connected to the router (Home Sharing works fine between the two PC's on the hub and the PC on the router). All wired and wireless devices on the router are visible and members of the router's Home/Office virtual network.
All of the PC's are visible in the Windows network and all shared files are accessable from all PC's, both wired and wireless.
Obviously the router seems to be the issue, something between the ethernet and the wireless access point components. I checked the settings and found nothing that would prevent Home Sharing between the wired and wireless devices. There is no setting that isolates the wireless network. I have done the following:
Read the router user manual and checked all the settings
Rebooted the router and tested.
Turned off the router's firewall and tested.
Home Sharing is turned on all the devices and all use the same Apple ID.
Restarted iTunes and tested.
Verified iTunes is "Allowed" in each PC's firewall.
Again, I can Home Share between the two wireless PC's but not between either of the wireless PC's and any of the wired PC's. I can Home Share between my iPads and iPhones and either of the two wireless PC's but not with any of the wired PC's. I can Home Share between any of the wired PC's but not between any wired PC and a wireless PC or iOS device.
I hope someone may have had a similar problem and has a fix suggestion. I'm stumped! I have a;so contacked ActionTec and awaiting an answer.

Solution from ActionTec is:
Log into your router.
Click the Advanced icon
Cclick Yes
Click on the IGMP Proxy
Select Disable
Click Apply

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas?

I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router. Also my Netgear ethernet/homeplug for wireless TV internet no longer works. Any ideas? I have tried unplugging, restarting, and resetting. No luck! Thanks!

You should probalby contact Netgear

HT1750 space.bar.and.delete.key.not.working.on.wireless.keyborad

space.anddelte
space.and.delete.keys.not.working.on.wireless.keyboard.help!

Before replacing the keyboard do 2-3 SMC resets using the instructions in iMac SMC and PRAM reset

[T400] Cisco VPN client not working over wireless adapter (but works on cabled connection)

I have a very strange problem.
I need to connect to my work via the cisco vpn client (version 5.0.00.0340).
My previous laptop (T43 , windows XP) worked well through both wired / wireless connections. My desktop machine (vista) works via wired connection (it has no wireless connection).
On my new T400, the VPN client works via a wired connection but not via the wireless adapter.
On the wireless apapter, the vpn seems to connect OK, but when I try to access resources via the VPN there is little response.
I get this in the vpn log...
405 08:56:57.073 04/16/09 Sev=Warning/2 IPSEC/0xE3700003
Function CniInjectSend() failed with an error code of 0xa4510009 (IPSecDrvCB:846)
I've tried disabling the firewall (in both the T400 and the router), removed access connections, and disabling tcp v6. I've rebooted everything too.
But, nothing seems to work. I suspect the problem is on the t400 somewhere, because the old laptop used to work OK via wireless.
I've seen some google links on cisco vpn not working via wireless but nothing seems to apply to my exact situation yet.
Anyone else had this problem or know of a fix? Thanks in advance.
Solved!
Go to Solution.

all good now, got it working.
The Deterministic network thing was not installed on the wireless adapter for some reason.
So, I installed the latest wireless driver, reinstalled the vpn and all is good now.

TS3276 when I use cable my mail does not work. with wireless ok

when I use cable my mail does not work. with wireless ok

Unpower and restart it. If that doesn't help, try holding menu and left navigation keys TOGETHER for 6 secs.
AC

Airport Express not working with wireless router

I just bought Airport Express to play music on my stereo. My PC running XP is connected to my wireless router (TeleWell TW-EA510v3) with ethernet cable and airport express wirelessly. Problem is that Airport Utility (and iTunes) can't find AE if it's not connected to router with ethernet cable.
I can connect to AE from Aiport Utility by "configure other" option so it's connected to my wireless network correctly.
Is this kind of set up even possible (pc wired to router and AE wireless)? I have tried tried WEP, WPA/WPA2 and no encryption on my wireless network and AE connects ok every time but Airport Utility still can't find it. I even tried to make a WDS network but AE was not compatible with my router. Now I can't come up with anything else to try.
Is there anything else to do? Should I buy WLAN adabter to my PC and would AE work then?
Why can't Apple make Airport Utility to recognise AE with given IP like with "configure other" option? Should not be too hard to program?!
Message was edited by: -MTL-

Follow the isntruction lisetd below...they work.
Actually, the ae is a slick device, once you get it to work.
Make sure that one (or both) checkboxes in Airport Utility > Airport Express tab
(middle of page) are not checked...if one or both are checked, they limit (hide) wireless connectivity options (e.g., WEP-64) to choose from.
P.S. You must have patience: it may take a couple of minutes to establish the connection and turn the led to solid green. So, give it a chance.
===============================================================================
OMG!!! You are da man!!!
I have this streaming perfectly now!! Here is what I did for others to see and use (it does work perfectly)
Step 1) Clear/Reset the Airport Express
Step 2) Connect the Airport Express directly to the Router/Modem via Ethernet to set up Wireless
Step 3) Do it via the Manual Set-up Effort Listed Below following:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing Linksys wireless network>
o Wireless Security: <select the encryption type of the existing wireless network> I have 64bit WEP
(Same as 40bit on the drop down menu)
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)
Once it congratulates you, unplug the ethernet cable
Verify in Aitport Utility that it still recognizes (if not, repeat the above). Note this may take a few minutes, so be patient.
Now place the airport express with your stereo (or whatever) and again be patient as it tries to find the network
(mine took 4 minutes) then it turns green and you are off listening to music on your stereo downstairs in another room.
Frustrating when it does not work at first, but keep trying and it will work!!
Thanks everyone for your help!!
===============================================================================

Bridge does not work for wireless clients - connecting to existing network.

Hi - I really hope somebody can help out here, after hours of trial & error, I have finally given up
I need to connect my Airport Extreme Base Station to my existing network. I have a linksys router (192.168.15.1) connected to my modem and this linksys router acts as DHCP server too.
I suppose I have to use "bridge mode" for that to work. But should the linksys be connected to the AEBS using the AEBS's WAN or LAN port?
If I use "bridge mode", then wired computers to the AEBS works fine - getting an IP from the linksys etc. BUT, the wireless clients will have a self-assigned IP and not get through to the internet. It's like the AEBS will not allow wireless clients to "get through" unless AEBS itself is handing out IP addresses.
Page 36 of this manual ( http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf ) shows the setup I want. But in the picture, it says "Ethernet WAN port" but the text says: "The Apple wireless device (in this example, a Time Capsule) uses your Ethernet network to communicate with the Internet through the Ethernet LAN port ( <--> )." I don't know which one to use, WAN or LAN - they show WAN but say LAN?
When I set it up as "share an IP address", the AEBS status tells me "double nat" and to change from "shared IP" to "bridge mode". I do that, and everything seems fine - for the wired clients. Now the wireless clients cannot connect, Airport on the MacBook Pro just say "Connection failed" and the MacBook says "Invalid password" (translated from danish), even though I set the Airport Utlity to save the password in keyring, so it should be correct... If I disable wireless encryption, the wireless clients will connect but get a self-assigned IP, and therefor not work (cannot get online)...
It seems the only way I can get wireless to work, is if I set AEBS up as DHCP, but then it won't be on the "same network" as the linksys (192.168.15.1), but rather on 10.0.x.x as I select. If I select 192.168.x.x within AEBS, I'm also getting some error messages, conflict/subnet thing.
Anyway - I really hope somebody knows how to get wireless clients to get an IP address from existing ethernet when connected to the AEBS.
Thanks!!

I've given up and had to go back to running "Double NAT" which also reports as a "problem" within the AEBS, but I just "ignore" it so the light will always be green.
It still ***** though, as "Double NAT" is also a reason for "Back to my Mac" not working properly, but how the ** am I supposed to avoid Double NAT when the wireless will not work in bridged mode?!

Time capsule not working as wireless base station suddenly

I have been using my time capsule as base station for wireless network in our house for some time and suddenly network is not working for all wireless devices in the house. Desktop imac is connected to internet via ethernet cable through time capsule and works fine so I know problem is not with cable modem or signal coming to house. Laptops appear to be connected to my network fine but when attempting to connect any site through safari or firefox I just get the spinning wheel thingy.

Check that the laptops are getting DNS and router (gateway) from the TC.. if not reset it and do the setup again.
What OS are you actually running on the laptops.. this problem started with Lion and is much worse in ML.. it is actually not a Snow Leopard issue which you list as the OS.

Log on screen not working with wireless keyboard only usb KB

Since upgrading to mountain lion from the latest version of Lion, I am not able to log on with my wireless keybord only with usb kb but the wireless kb is working well, it react but no stars ** appear in the log on password field
So i enter with the usb kb and then the wireless kb is working well
I put all keybord settings to default
I reset smc and pram but same behaviour
Any hint to fix this ?

I fought for it for long time. I used command-r, option key, command-option-r, option-r, everything you can imagine but it did not work. I even shut down the imac and then tried all these combinations but it still did not work. I EVEN TRIED APPLE's OFFICIAL ANSWER TO THIS ISSUE BUT BELIEVE ME IT DID NOT WORK AS WELL. Then I deeply thought for a while and shutdown the iMac. Then I took off the batteries from the wireless keyboard. Then Waited for 5 seconds or so. Then I just started the wireless keyboard with the button on the side. It started blinking. I immediately understood that my trick is going to work. I understood the problem. While the keyboard was blinking I started the imac. Now after startup chime from apple i just pressed the option key. And guess what- THE RECOVERY OPTION POPPED UP! See, the point is after you restart or shutdown the keyboard is still kind of paired with the imac so when you start it those keys are kind of overlooked. When you reaaly take out the batteries from the keyboard the pairing is lost. When you restart the imac the pairing is established during the startup chime tone. This is precisely the moment to press those keys like option or command-r. The command-r key works only if you have imac that was preinstalled with 10.8
I hope this saves your hours of work! I really wished that APPLE knew it. I have so much believed in this company so far.

Itunes Sharing not working over wireless

I have three PC's both running the latest version of ITunes.
Desktop 1 is running Windows XP and connects directly into the Action Tec Router via a wired connection.
Laptop 1 is running Windows 7 and connects to the Action Tec router via a wireless connection.
Laptop 2 is running Windows Vista and connects to the Action Tec router via a wireless connection.
All PC's can connect on the Internet. The wireless connection uses WPA/PSK. Any firewalls are disabled.
Desktop 1 can see the Library of both Laptop 1 and Laptop 2. From Desktop 1, When I click the library of laptop 1 Itunes says "laptop1 library is not responding".
Laptop 1 and Laptop 2 do not see the library of either Desktop 1 or the other Laptop.
If I move Laptop 1 from a wireless connection to a wired connection, the sharing works fine.
Anyone know why the wireless is causing Itunes sharing to not work?
Thanks, Jim
Solved!
Go to Solution.

So this morning I was playing the Windows 7 laptop and decided to delete my windows wireless profile on the laptop called home and my existing home SSID on the Verizon router. I created a new SSID called boo with no security. I connected to that SSID and Itunes sharing worked between the desktop and laptop. I then added WPA2/PSK to the boo SSID and sharing still worked. Finally I went back to my original SSID called home and WPA2/PSK, recreated the home profile and Itunes sharing worked again.
I then went to the Windows Vista Laptop and without making any changes to it, Itunes sharing worked.
So in the end it seems deleting the current SSID configuration and rebuilding it on the verizon router cured the problem (for now).
Jim

Lumia 920 not working after wireless charge

This is not my phone specifically, it is a family memers phone on my plan.
So she has had the phone for a month and from what i know, it worked fine no issues. ATT forgot to order her a wireless charger so they finally did and used it for the first time last night. Not sure how long she charged, but after chargine, the phone did not work and she could not boot the phone.
I asked her to ry to do a soft reset by holding the volume and middle button, the phone vibrates after 10 seconds, but it shoes a blue screen. I asked her to do a hard reset wiping everything and starting frrom factory, same thing happens with a blue screen coming on and nothing else.
Im not certain if she had the update either, i doubt she has the update. Is there a way to get this phone up and running or will i have to do a warranty exchange?
Thanks

Sounds like you have tried everything, so apart from installing the Portico update that was pushed for AT&T and Rogers devices in the last few days, and checking that she is up-to-date with all the Nokia system app updates in the Store, there is nothing much else that can be done. You most likely will need to take the phone back to the point of purchase and request a replacement, as it sounds it is hardware defective.

My wireless key board does not work but wireless mouse does?

I can not get my wireless keyboard to work again after i changed the batteries, It work sonewhat before I chaged the batteries but don't work at all now. I tried removing the thing pluged into the usb port and i pushed the connect button on the bittom of keyboard but nothing works. The wireless mouse works fine. What could be wrong?

Not sure which KB you have, but I'd check a few things.
1) You might have a dead battery or two - perhaps try batteries known to be working in another device, such as a TV remote control.
2) The KB shouldn't need to be re-synced just via a battery change. However, if you do resync - you might need to hold the sync button longer. On my TouchSmart IQ804, I usually push mine about 10 seconds or so. I can pull the USB tranceiver out of the back of the unit and put it in the side/front port, that way I can watch the LED that indicates sync/transfer better.
I know that there are some good wireless KB troubleshooting documents on the HP website - here is a link to one of them.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006821&lc=en&cc=uk&dlc=en
-DM (a long-time HP employee)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

T500 Ethernet Connection Not working, but wireless is working

Hi
In my laptop, when I try to connect to internet using the Ethernet card, it is not working.
My laptop has the following configuration.
T500; Windows Vista 64
Ethernet card: Intel(R) 82567LM Gigabit Network Connection
Following are what I observed.
1. From command prompt, when I executed the command ipconfig, it is not listing the ethernet adapter connection.
C:\Windows\system32>ipconfig /all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Palasseri-Mana
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : My WiFi PAN
   Physical Address. . . . . . . . . : 00-21-6A-1A-24-B3
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection 2:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : WiFi STA
   Physical Address. . . . . . . . . : 00-21-6A-1A-24-B2
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::42a:c2e2:cf9f:7b87%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.0.12(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Sunday, February 21, 2010 6:12:15 PM
   Lease Expires . . . . . . . . . . : Sunday, February 28, 2010 6:12:14 PM
   Default Gateway . . . . . . . . . : 192.168.0.1
   DHCP Server . . . . . . . . . . . : 192.168.0.1
   DHCPv6 IAID . . . . . . . . . . . : 234889578
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-88-93-46-00-24-7E-13-AE-17
   DNS Servers . . . . . . . . . . . : 192.168.0.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{7DB78E75-7547-408D-97D2-C347AF27F
5F9}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{5D3FE014-FD4D-40E1-AB3A-94B48F4A9
392}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 14:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
2. Control Panel\Network and Internet\Network Connections : Under this, when I list all the connection, the Ethernet connection is showing it as Enable.
3. When I unplug the network cable, at Control Panel\Network and Internet\Network Connections, I see the status as Cable Unplugged..
4. I downloaded the latest driver and installed, but didnt change this behavior.
How can I fix this ethernet issue. Any help is deeply appreciated.
Thanks,
NP

palasseri wrote:
Thank you for your reply.
Yeah, it is listed under the Device Manager.
I see one potential error under the event viewer. Thank you for that pointer.
The IP address lease 192.168.0.11 for the Network Card with network address 00216A1A24B2 has been denied by the DHCP server 192.168.0.1 (The DHCP Server sent a DHCPNACK message).
Any idea why this is coming???
I get that exact same error when I change my MAC address and my computer is trying to connect to my router.
This message is probably just the result of your computer not recognizing your Ethernet Adapter.
I have never had this problem and am just shooting in the dark, but I would say you either have a bad Ethernet card, or your Adapter is not configured correctly.
I keep wanting to go back to your adapter in the Device Manager.
Is the Device Status "This Device is working Properly"?
Under Power Management, is the "Allow the computer to turn off this device to save power" unchecked?
Are you downloading the drivers from Lenovo's website?
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70199
Have your tried Uninstalling the adapter, and reboot.
Your system may automatically reinstall the adapter. If not, you can manually reinstall it.
T500 ~ T9400 2.53GHz 1066MHz 6MBL2 ~ Vista 32bit Home ~ WXGA 15.4 LED ~ ATI Mobility Radeon 3650 ~ 4GB ram ~ Camera ~ 160GB 7200rpm HD ~ Intel Turbo Memory 2GB ~ CD-RW/DVD ~ Intel WiFi 5300

Help...volume buttons not working on Wireless keyboard

I have a OSX v10.5.8 and just got a new wireless keyboard but can't get the volume buttons to work, tried some updates and this is not working either...what am I doing wrong, its driving me mad

all depends on the particular keyboard, my one has to use the function ( fn) and volume up or down keys together

WEP not working? TIVO Wireless

Similar Messages

Maybe you are looking for