WEP password from my iMac G4 flatscreen not support by Time Capsule
Hello,
I've just installed my new Time Capsule (dual band) today in combination with my new MacBook Pro. It all works fine, however I also have an 'old' iMac G4 17" flatscreen and here is the problem: although I use Mac OS X 10.4.11 I can't connect to the newly designed WiFi 802.11n network as I used to do so. When I fill in the correct WPA-personal password (the same as I use for my MacBook Pro) the button OK doesn't get highlighted so I can't click on it. It seems that my old iMac only support WEP-password security, but I can't believe that.
What do I do wrong and what should I do in order to get my old iMac G4 17" flatscreen connected to my new (Time Machine powered) wireless network?
Thanks in advance for your swift help!
Kind regards,
Marco
Hi,
I've set the parameter for 'Radio Modus' for the Time Capsule on:
'Only 802.11n(5GHz) - 802.11b/g' , because I don't know the difference between all these settings.
Still I can't log in with my iMac G4 flatpanel as the AirPort software which is part of Mac OS X 10.4 by the way only supports the following modus:
PASSWORD options"
- No
- WEP-password
- WEP 40/128-bits hex
- WEP 40/128-bits ASCII
- LEAP
- WPA (personal)
- WPA (business)
- wpa2KeyTypes
Non of the WPA password options seem to work!!??@
Do you perhaps have an idea how to configure the 'Radio Modus' for my Time Capsule and what kind of Password methodology I should use accordingly?
Thanks!
regards,
Marco
Similar Messages
-
I receive a "not connected to the internet message" several times daily on my iMac connected via airport to a time capsule which accesses the internet via a cable modem. Software/firmware is up to date on the iMac (OSX 10.6.8) and Tme Capsule(7.5.2). Browser is Safari 5.1.
When I input my password at the prompt to enter network preferences, all the lights go green (ie... ethernet, ISP etc.) and the connection re-establishes immediately and states "the connection appears to be working normally".
It more of a nuisance than anything and seems to have started ocurring over the past couple of months. I also have a windows XP box also connected to the same cable modem that I never have internet connectivity issues with. I've verified all the physical aspects of the connections and can't see any evidence of any actual drops in the modem logs. I suspect it is just an intermittent communication loss between the Imac and the Time Capsule, but I am not very familiar with Mac equipment yet.
Just wondering if anyone has experienced a similar problem and what you did (if anything) to resolve it?
Thanks.The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network. -
iPhoto - When I add new photos to iPhoto from my iMac they do not appear in the "Photos" library. They do appear in Last Import. Any thoughts?
If you are seeing your photos in "Last Import", the photos are somewhere in your library. Perhaps the dates are wrong, and you do not see the photos arranged by date, where you expect them to be.
Select one of the photos on "Last Import", then ctrl-click it and select "Show in Event". That will take you to the event in event view. -
forgot username and password from the email iCloud chozhe not know forgot. purchase the product, all documents have. What to do?
If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625. If you don’t know your password you can reset the password as explained here: http://support.apple.com/kb/PH2617.
-
How do I remove master password and administrator password from my iMac ?
How do I remove master password and administrator password from my iMac ?
You can change it or reset it however I don't think you can remove it. Please look over:
http://support.apple.com/kb/ht1274 -
Xcode is running from a volume that does not support ownership. Please move Xcode to one that does.
I have Problem, I can't install Xcode 6.1 on my iMac due "Xcode is running from a volume that does not support ownership. Please move Xcode to one that does."
I have two HD partition, First one I use for my Lion OS, and the second I just installed Yosemite since Xcode 6.1 need OS upper than lion.
Here's my HD Info.
Mac HD : Yosemite
Machintosh HD: Lion
I do try to uncheck and check when I install Xcode. Maybe I don't know where should I put Xcode.dmg when I want to install.
Thank you. Sorry bad english.Run Disk Utility select the volume you are installing Xcode on and look at the bottom of the screen and make sure Owners Enabled: says yes.
Also make sure there are no other versions of Xcode anywhere on your system. If there are delete them all and then do a fresh download and install of Xcode, BTW why are you nor installing from the Mac App Store, where did you get the dmg from?
post back if that does not resolve the issue.
regards -
I wanted to know how to unlock my iphone, since I had to restore it and when it restarted, it appeared this message: "The SIM card que you currently have installed in this iphone is from a carrier that is not supported under the Currently actuvation policy that is assigned by the server activion. this is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request que this iphone be unlocked by your carrier. Please contact Apple for more information. "
I need help, I use my phone for everything enclusive to work. I appreciate if you can help. I'm from Brazil. My name and giullia.Did you purchase this device from Apple or an authorized reseller? It sounds as if you had a device that was jailbroken/hacked to operate on your carrier. Upon updating the iOS, it is now locked back to the original carrier the device was locked to.
Only the carrier the device is locked to can authorize an unlock. You will need to make contact with that carrier and see if they provide unlocking services, and if they do, if you qualify for an unlock. Otherwise, you are out of luck. One that carrier can take care of the unlocking. -
I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?
Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331 -
How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.Firstly how are you connecting to the TC.. wireless or ethernet?
Please open a command window and ping it.. ping by name and by IP address.
If ping succeeds at least by IP it should work.
In windows explorer type
\\10.0.1.1 (or whatever the TC ip is.. that is the default).
Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
7.6.4 firmware on the TC is useless. It works better on 7.6.1
If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls. -
It says SIM card is from a carrier that is not supported activation policy?
after reseting my phone i am very stunned because it says that The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Cant understand what to do now...Sounds like the iPhone was hacked to be unlocked. When restoring an iPhone with iTunes that was hacked to be unlocked, the hack is removed and re-locked to the carrier the iPhone was sold as carrier locked with when new.
-
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.
-
iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update
I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set). -
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information
what can in do?Well unfortunatly that advice does not always work. I bought a unlocked iphone4 from apple several years ago and went to att on a no contract basis. Six months later the phone crashed while updating the operating system. Apple replaced the phone with a new one. All is fine till I got a iphone5 and gave te phone to my cousin. The phone is now locked to att but att says the IMEI number is not a valid ATT IMEI and therfore cant unlock it. Apple says there is nothing They can or are willing to do so now I am stuck for a 600.00 phone that can't be used.
If anyoun knows a way naround this situation mI would appreciate a heads up. -
RAW files from Olympus C-5060WZ are not supported
I've found out that although iPhoto supports RAW files from C-7070WZ, it does not support C-5060WZ. And that's a big issue for me, because I have a lot of ORF pictures from this camera. Is there some workaround for this? Or maybe I can hope that support for my camera will be added in the future?
Drolevar:
Welcome to the Apple Discussions. If you can find an application that can convert those photos to a DNG file format iPhoto will be able to handle them. Adobe has a free DNG converter available here: http://www.dpreview.com/news/0609/06091901adobecameraraw35.asp. The following page will list the supported cameras: http://www.adobe.com/products/photoshop/cameraraw.html. If you don't see your camera try it any way. But be sure to use it on a copy of the file as it converts the original if you're not careful in setting up the options.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
sir have this error so what can i do The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
It looks like the iPhone is locked to a carrier that is not the one you are trying to use.
You need to determine which carrier it is locked to and then contact them to see if they are willing to authorise the unlocking of your iPhone. As ManSinha mentioned, many carriers will only authorised the unlock if requested by the customer who had the contract with them for this iPhone.
Remember that only the carrier who owns the lock on your Iphone can authorise Apple to unlock the iPhone in their servers. You need to contact the carrier or have the previous owner of the iPhone request the unlocking.
Maybe you are looking for
-
I can't open .mov attachments in mail with ios 7.1? Please help?
Hi Ever since I downloaded ios 7.1 I can't open .mov attachments in my email. I can email a movie file to myself from the same device and when I click to download it, I get a generic icon and it simply goes to a white screen. I never had this problem
-
Hi , When I'm clicking on "Assigned Condition Records" tab for any hierarchy node in BP group hierrarchy, system is giving error "Usage PR and maintenance HIER_NODE cannot both be supplied".I've maintained maintenance group HIER_NODE properly in SPRO
-
I bought Sketch 2 and it crashed. Can I re-install it? How?
I bought Sketch 2 from the App Store two days ago. After working less than an hour it froze and I had to restart my Mac. After that every attempt to start Sketch gives an immediate crash. I submitted the error report to Bohemian Coding (the author) b
-
I noticed yesterday that the time between pressing the startup button and hearing the chime and thus the boot process starting took about 5-10 seconds. But just now I turned it on, and when i hit the power button it was almost instant from when i hit
-
hi, Our client is using 4.6c system. I want to download PO attachment with GOS functionality. I tried using FM BDS_GOS_CONNECTIONS_GET in 4.6c system. But this FM is not present in 4.6c System. Is there any other way of downloading PO attachment with