WER patch for system update patch 1.2 in System Update

This patch, on my machine, removed the task scheduler entry to run System update patch utility on Windows Event id 1001. ie , it turns off SUP a newer version of LPU, Lenovo patch utility. SUP is installed with system update.

So first of all you solution.
open Command Controll (CMD) (i would recommend in administator mode)
navigate to the folder where you saved your "systemupdate.exe"
type systemupdate502-06-26-2013.exe /s /a /v"/qn"
(this will install System Update silent. For more inforamtion about that you should visit the microsoft support)
Now wait a bit (depends on how fast your maschine is)
Now open Metro, press this new little "down arow" and there you must find your installed systemupdate
So and now a few words more:
I had this same Problem on a Leaked Final Windows 8.1 version. This means when in October Win8.1 will offical realease, Systemupdate will not work. I think lenovo should go back to his roots and provide the best support they could instead of blocking all work to Windwos 8.1 Threads. I know many people that buy your Laptops only because of the good support.

Similar Messages

Any non-public patches for the never patched Adobe Illustrator CS4?

I've been having lots of bugs with CS4 and Illustrator in Javascript. Sometimes AI just locks up, produces a random error unless restarted before trying again, or otherwise has a bug such as the one where in some circumstances the "paste()" command produces an error for some documents unless I put an alert on a line prior to the paste statement.
Since upgrading everyone to CS5 is expensive is there anything I can do when faced with CS4 bugs that will apparently never be patched? Some problems just have no workaround short of quitting AI and restarting it.

Im not a user of this 'at the moment' my combo of intel mac and cs version are the only unsupported one (hey ho)… But you may want to look at the scriptographer plug-in and see if thats of any benefit to you?
http://scriptographer.org/download/
You may find all sorts of improvements…

Problem when apply SAP Bundle Patch for 10.2.0.5

Hi,
We are trying to apply SAP Bundle Patch (SBP) SAP_102052_201102_SOL64.zip and SAP_102052_201103_SOL64.zip using MOPatch utility. Both MOPatch and OPatch utility have been updated with the latest download from SAP. When applying patch for SAP_102052_201102, most patches went through except for one patch that requires OPatch to be version 10.2.0.5.0. The OPatch version downloaded from SAP is 10.2.0.4.9. Even the OPatch delievered together in the SAP_102052_201102_SOL64.zip file is 10.2.0.4.9.
Below are extract of the opatch log file for this patch:
INFO:ApplySession applying interim patch '10248542' to OH '/oracle/DEV/102_64'
INFO:Starting to apply patch to local system at Wed Mar 23 10:49:25 SGT 2011
SEVERE:OUI-67073:ApplySession failed: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Wed Mar 23 10:49:25 SGT 2011
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Wed Mar 23 10:49:25 SGT 2011
INFO:Stack Description: java.lang.RuntimeException: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
Help appreciated.
Regards,
Lim

Hi,
I went to
http://service.sap.com/oracle-download
then
Oracle 10.2.0.5
then
OPatch
The file I can see there is generic for ALL operating systems and the name is:
OPatch_10205_Generic_v0.zip
it seems that the version is 10.2.0.5, not 10.2.0.4.9 as you mentioned.
I have downladed it and look at the README:
Patch summary:
README file for OPatch 10.2.0.5.0, the Oracle Interim Patching Tool.
I'm not installing it, but it seems that the version is not the same as yours.
Is this the one you have downloaded?
Have you installed it properly? => may be you are running an older one

I'm using my iPad with iOS v 6.1.3- is there a security patch for the SSL/TLS vulnerability for this, or do I have to go to 7.0.6?

I'm using my iPad with iOS 6.1.3. Is there a security patch for this version, or do I have to update to iOS 7.0.6?

There is an update for iOS 6... v6.1.6. But it is only available to iPhone 3GS and iPod touch 4th gen users. http://support.apple.com/kb/HT6146?viewlocale=en_US&locale=en_US
For iPad, the highest supported os for iOS 6 is v6.1.3. If you want to get the security patch, you'll have to go to iOS 7.0.6.
Hope this answers your question.
~Joe

Shared library patch for C++ (Version 5)

Hi,
I was atttempting to install StarOffice 5.2 on an UltraSparc10 runnning Solaris 7. Got this message: "Please install the patch 'Shared library patch for C++ (Version 5)' or contact your system administrator." I searched the Sun website for such a patch, and found none. Does anyone know what this is and where to get it?
Thanks, John Craig

you can search for this patch in http://sunsolve.sun.com
the patch number is: 105591-09
[email protected]

Generic Patchs for 11.2.0.4 WIN 2008

Hi Friends,
As per SAP note 1949250 - Oracle 11.2.0: Patches / Patch collections for 11.2.0.4 below are the required Bundel and Generic patches.
Oracle Database Patch
Patch ID
Patch Description
PATCHBUNDLE11204P_10-20010784.ZIP
19651773
Windows 64-bit, Bundle Patch
PATCHBUNDLE11204P_10-20010783.ZIP
19651773
Windows 32-bit, Bundle Patch
PATCHBUNDLE11204P_7-20010784.ZIP
18842982
Windows 64-bit, Bundle Patch
PATCHBUNDLE11204P_7-20010783.ZIP
18842982
Windows 32-bit, Bundle Patch
p9584028_112040_Generic.zip
9584028
Generic, Database Upgrade scripts (SAP Note 1431793)
p9656644_112040_Generic.zip
9656644
Generic, Database Vault scripts (SAP Note 1502374)
p13724904_112040_Generic.zip
13724904
Generic, additional patch
p17511071_112040_Generic.zip
17511071
Generic, additional patch
p17259786_112040_Generic.zip
17259786
Generic, additional patch
But on service market place I see below patches one patch extra (P18304304GEN11204P_1-20010784.ZIP Patch 18304304 for Windows 64-bit)
P13724904GEN11204P_1-20010784.ZIP Patch 13724904 for Windows   1
P17259786GEN11204P_1-20010784.ZIP Patch 17259786 for Windows   1
P17511071GEN11204P_1-20010784.ZIP Patch 17511071 for Windows   1
P18304304GEN11204P_1-20010784.ZIP Patch 18304304 for Windows 64-bit
P9584028GEN11204P_1-20010784.ZIP Patch 9584028 for Windows   1
P9656644GEN11204P_1-20010784.ZIP Patch 9656644 for Windows   1
PATCHBUNDLE11204P_10-20010784.ZIP Windows Patch Bundle 10 with CPUOct2014
PATCHBUNDLE11204P_7-20010784.ZIP Windows Patch Bundle 7 with CPUJul2014
Can any one please let us know why this generic patch is not mention in SAP Note?? Do we have to apply this Patch 18304304?? if yes why it is not mention in the note?
Thanks
Tabrayz

Hi
Just have a look to the readme file inside the patch... it is RAC specific, so if if you do not have RAC no need to apply it.
Regards
=========================================================================
Interim Patch for Base Bug: 18304304
=========================================================================
Date: 2014 Feb 25 15:12:56 CET
Platform Patch for          : GENERIC
Product Patched             : RDBMS
Product Version #           : 11.2.0.4.0
RAC Rolling Installable     : YES
SAP note                    : 1976879
Bugs Fixed by this patch:
18304304: SAP SPECIFIC POWERSHELL SCRIPTS FOR MS CLUSTER ENVIRONMENTS

MPS run, planned orders were created for all levels ?

Hello PP members
I ran a small scenario
material    MRP Type     Low Level    SG           M/T Type
A      M0         000             40              FERT
B               PD              001              40             HALB
c               PD              002               10             ROH
Maintained PIRs(MD61) for material A, and ran MD41( Single Item Multi level Planning)
As material A is an MPS item, I was expecting that it should create planned orders only for material A, but in this MPS run it created planned orders for material B & C. (Looked into MD04, where I see planned orders were created
for all the levels)
As per the MPS run, it will plan only for one level of BOM (in this scenario for material A)
Any suggestions, why planned orders were created for material B & C
please clarify

Just check
System must have created a dependent requirement planned order and not the planned order for requirement you put in demand management for B and C
i.e. if you enter a demand in MD61 for B and C, run the transaction, system will not consider this requirement during MPS run. MPS run will consider the requirement if the requirement for the child is comming from parement where parent is MPS item.
Hence you need to run MRPm for B amd C if teh requirement(not dependdent requirement from A) is to be considered.
I hope you are clear
Edited by: Rajesha Vittal on Jan 28, 2008 8:06 AM

HT4356 Is there an update or patch for Epson workforce 435 to AirPrint with my apple products

Is there an update or patch for Epson workforce,435 printer to AirPrint with my apple products,I.e. iPhone and iPad?

Tonye0426-
You might contact Epson, but I doubt there is a way to upgrade it to AirPrint compatibility. If you were recently sold the printer for use with an iPad or iPhone, you can take it back and either exchange it or get your money back.
As Deggie stated, your choices include Apps on the iPad like PrintCentral or the Epson App, or running a program on your computer that shares its printer as AirPrint over WiFi. Programs that can do that are Printopia and FingerPrint, and are reported to work well. Your computer must be on and awake any time you want to print. <Printopia for Macintosh> <FingerPrint for both PC and Mac>
Fred

Patches for Sun Studio 12 Update 1

Dear all,
I have recently installed Sun Studio 12 Update 1 on an x86 system and have some questions pertaining to the required patches. According to my understanding of the text on the homepage for SS12U1 (http://developers.sun.com/sunstudio/downloads/patches/ss12u1_patches.jsp) it should be possible to download these also without a service contract, but this does not seem to be possible. The SunOS 5.10_x86: Microtasking libraries (libmtsk) patch 120754-6 distributed with the SS12U1 does not seem to be sufficient for 64-bit OpenMP programs. For correct functionality of the compiler patch 120754-7 appears to be needed.
My question thus is if it should be possible to access the required Sun Studio 12 Update 1 patches without a service contract?
Any help regarding this is highly appreciated.

Tthe recent lockdown of all patches by Oracle, making them available only under a support contract, makes the issue of Sun Studio 12.1 patches discussed here quite important. If 120754-07 is required for proper SS12.1 functionality, then users without support contracts must not upgrade their systems to more recent Solaris versions, as SS12.1 will have to be re-installed, and the 07 patch will be unavailable. When will SS12.2 or SS13 (?) be released? If Oracle really wants to make some money, they will never release any further SS updates, thus requiring customers to buy contracts to get the darn patch.
Check these prices for SS support contracts:
Sun Studio 12 Update 1 Standard Sun Software Service Plan 1-year
$1,015.00
Sun Studio 12 Update 1 Premium Sun Software Service Plan 1-year
$1,218.00
http://developers.sun.com/sunstudio/downloads/index.jsp

Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

hello,
After installing the Adobe reader, I got the following error message:
Error 1328.Error applying patch to fileC:/Config.Msi/PTEADA.tmp.It has probably been updated by other means, and can no longer be modified by this patch.For more information contact your patch vendor

For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

The new Update with the Patch for Camera Raw is not working. Code U44M1P34

Hi there,
i have a problem with the new CC Update - including the patch for Camera Raw 8.7.1
Error Code: U44M1P34
Photoshop CC (2014)
After Effects CC (2014)
Brisge CC
The logfile shows 1 fatal error:
FATAL: Payload 'Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number following.
I have tried to uninstall an reinstall. Did not work at all, because the same Problem is shown.
I did not install in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw Update.
Are there others with the same Problem? Any ideas?
Thanks in advance and Greetings,
Joerg

Hi Jeff,
it seems that i have found a dirty, but working solution for my problem on this site: Getting fatal Exit Code 34 when installing an app
To change these 3 folder names and reinstalling of my Programs worked fine without any errors:
Adobe PCD -> Adobe PCDold
backup -> backupold
caps -> capsold
Now the Programs are on the actual status with all updates included and everythings seems to be fine.

In Acrobat X for CS6 on a Windows7 64-bit won't open after update. Is there a patch because unistall/reinstall only lasts till the next update?

I have Acrobat X that came with my CS6 suite. It will work fine for a few months but when a new update comes along it won't open at all. Even turned off updates and its still happening. I have gone through the process in your FAQ: Update errors for Window Acrobrat about 3 times now (Uninstall and reinstall from disk). Is there a patch that I can load to have this stop happening? I am pretty much frustrated that I have to do this every two months.

Hey tkuhlmann,
Could you please refer the KB doc link mentioned below and see if this helps:
Doesn't launch after 30 days | Installed as part of a CS6 suite
Let me know.
Regards,
Anubha

HT6147 Why haven't they done a patch for those of us who have not updated and prefer to use iOS 6?

Why haven't they done a patch for those of us who have not updated and prefer to use iOS 6?

Totally agree with Andy. Apple needs to support its users whether or not they decide to update to iOS 7.
The reviews from i Pad 3 owners (like me) is that when they've updated to iOS 7 they've experienced latency and sluggishness. Why would I ruin a perfectly good iPad by updating to iOS 7?
Please let me know where I can find a patch for iOS 6.
Thanks!

Next System Firmware patch after v7.2.7.d for SPARC T5120 & T5220?

Hello
We've patched the firmware before on our T5120's, scheduling an outage only to realize that a yet more recent patch has been released just days after our outage.
Based on previous patch release frequencies I believe the next release would be soon for ...
Hardware PROM: SPARC Enterprise T5120 & T5220 Sun System Firmware
after Patch Id: 139439-09
was released Date: Feb/17/2010
Unbundled Release: 7.2.7.d
Anyone know when this is?
Thanks, Roger

Hello Roger,
there is generally no patch release frequency. Patches fix bugs and/or add support for hardware (sometimes for minor design changes, required because a supplier of a component changed).
In case this particular system has a very high number of firmware patches, I would suggest that you use your service contract, either to review pending bugs or opening a service case.
These forums are only user-to-user, it's very unlikely that you get an offical statement. The Storage Forum is an execption, there volunteer people from the storage division, who sometimes advice about up-coming releases.
Michael

Any updates and/or patches for Aperture 3.2?

Just wondering if there are any updates and/or patches for Aperture 3.2. Especially for "Detect Edges" mode.

Hi
I don't know if it solves your problem, but version 3.2.1 has been released on last Thursday. You could update and try it.
Regards, Michael

WER patch for system update patch 1.2 in System Update

Similar Messages

Maybe you are looking for