Werb services to proxy- synchronous scenario

Hi experts,
Can anyone help me with the detailed scenario of synchronous WEB SERVICES TO PROXY step by step. I tried searching in sdn but no luck.
Also tell me here that XI will expose the Outbound Interfaces as a Web Service Interface. how the Web Service Description (WSDL File) will be generated for the Interfaces in Integration directory?
Also mapping is not required here.
Thanks
Veeru

what types of business systems have to create for this webservices to proxy kind of scenario
you dont need multiple business systems....just create one business system in SLD and then import it into ID.
Assign the inbound message interface to this business system and configure your scenario.
Check if a Business System already exists for this SAP system....if there is another Proxy/ IDOC/ RFC scenario developed for this SAP system then there should be a Business System created...just re-use the same.
If you need help on how to create SLD then just make a simple search on SDN.....you will find good blogs/ documents.
On the Sender side (WS) you need to create Business Service in ID.
Regards,
Abhishek.

Similar Messages

File to Proxy synchronous scenario

Experts,
I am working on a File to proxy synchronous scenario.
I am doing the content conversion at the sendre side by using java program as input structure is very complex so have to go fr java code. Its a txt file at sender side.
Once I read the file in XI, am doing a graphical mapping ( just one to one mapping) then using the server proxy , a service entry is getting created then response am sending to the receiver.
My question is , can I use graphical mapping as I am using a java class for content conversion? both in one scenario is possible?
I have developed a java code for content conversion and it is working fine. How to use this .jar file in XI?
Can Any one help me wz thsi one?
Thanks in Advance
Virendra

My question is , can I use graphical mapping as I am using a java class for content conversion?
You can use as long as the structure generatde by the JAVA program is same as the source-message structure of the message mapping.
I have developed a java code for content conversion and it is working fine. How to use this .jar file in XI?
In my opinion this should be the adapter module....as the conversion needs to be done in the channel and inclucing it as a mapping wont help.
Regards,
Abhishek.

SOAP to Proxy synchronous scenario

Hi,
Hope you are all doing well.
I have a SOAP to Proxy synchronous scenario. As part of this scenario, the data structure of the response sent by SAP is different from the response sent back to the SOAP requester. Hence I have used request message mapping between the SOAP request sent by requester and the one passed on to SAP and response message mapping between the response sent by SAP and the one passed on to the requester. Both the message mappings are incorporated in a single Interface mapping.
The problem is that the interface is behaving like a asynchronous one, i.e., request is passing over to SAP but though the proxy is giving a response back, the same is not coming over to XI.
It would be really helpful if you can let me know what might have gone wrong.
regards
Debansu

Hi,
you should have that:
1. Two Message Mapping:
1.1. a Message Mapping for request    (called MM_request)    , from MT_SOAP_request     to   MT_Proxy_request.
1.2. a Message Mapping for response (called MM_response) , from MT_Proxy_response   to   MT_SOAP_response.
2. One Operation Mapping (in PI 7.1) or Interface Mapping (in PI 7.0) from SI_SOAP to SI_ Proxy with:
2.1 in the tab "request", so from MT_SOAP_request     to   MT_Proxy_request    , give your Message Mapping "MM_request".
2.2 in tab "response"   , so from MT_Proxy_response   to   MT_SOAP_response, give your Message Mapping "MM_response".
3. In you Directory, you define a flow like that:
from SI_SOAP to SI_ Proxy by using your Operation Mapping.
If I missed nothing, that's all.
MT = Message Type
MM = Message Mapping
SI =Service Interface in PI 7.1 or Message Interface in PI 7.0.
regards.
Mickael
Edited by: Mickael Huchet on Oct 19, 2011 4:07 PM

SOAP - XI- PROXY synchronous scenario

Hi Experts,
I have a
SOAP -
XI -
PROXY Synchronous Scenario
I have done the following things ESR and ID
ESR:
1. Created DT and respective MT for Request and Response.
2. Created Service Interfaces with Synchronous mode with respective MT's.
3. Created Two separate MM with respective Request and Response MT's.
4. Created Operation Mapping and call both Request and Response Mappings in it.
Integration Directory (ID):
1. Configured considering Sender SOAP and Receiver ECC Services.
2. Configured CC with required parameters in Sender SOAP CC and Receiver XI CC.
3. Generate wsdl from Sender agreement and save it as a local file.
I am getting error in receiver agreement. Do I need to specify any Module parameters in Module TAB for Sender CC or Receiver CC to synchronous scenario.
Please hep me out.
Thanks

Hi Ram,
I am getting error in receiver agreement. Do I need to specify any Module parameters in Module TAB for Sender CC or Receiver CC to synchronous scenario.
It looks like you did not create a receiver agreement, or if you did, it did not match the interface that is given or configured in Interface Determination. Can you recheck your configuration?
Regards,
Mark

Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

Dear Experts,
I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
Cc monitoring in NWA.
1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
local IE i.e. Tx SXMB_MONI.
Note : In NWA , I can see only 1 message that too in cancelled status.
2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
it should in ACTIVE status in Tx SMQR..
Regards
Rebecca

Hi Thomas,
Valuable inputs..
1. Since I don't have any audit log for successful message, would you be able to share referring to the
below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
Regards
Rebecca

Web Service u0096 ABAP proxy synchronous interface

hi experts,
can you suggest me how to do this scenario?
Web Service ABAP proxy synchronous interface.

hi,
you can create a web service on XI
which will call ABAP proxy (on ERP, SRM etc)
in a synchronous way (you just need to generate the proxy class
in TCODE SPROXY)
then you can fill the method of your generated proxy class
and you will have WS - ABAP proxy interface
have a look at this to undrstand server proxy:
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Respone message in an synchronous scenario

Hi,
I want to create a scenario:
third party system (via WebService) <-> SAP PI <-> SAP (ABAP Proxy)
I have a SOAP to Proxy synchronous scenario.
Its an synchronous outbound and an synchronous inbound interface.
It is possible to transfer the response message from the inbound interface to the outbound interface?
The response message is a very elemetary mesage (only a key).
With the message from the third party system I will insert data in the SAP system. The new key I will return to the third party system via the response messages.
Any help please?

Surely you will have two mappings in place.One mapping will correspond to the request message, while the other one will correspond to the response.When you are doing the mapping for response, then however do it in reverse manner. For example suppose in your case System A is the sender and System B is receiver. Then you make two message types for each system,one for request and one for response.In the mapping for request, the message type of System A will be source and that of system B will be target because request is going from A to B. However in the response mapping, as the response is coming from B to A, in the mapping you will have the message type for system B as source structure and that of System A in target..And you will add both of these mappings in the Operation mapping in the message mapping tab.

Proxy to File Synchronous Scenario

Hello,
My scenario is
SAP System ----->(Proxy) PI -------->(File) FTP
Synchronous Scenario
I have been using the RequestResponseBean and ResponseOnewayBean module in the Sender Request Adapter channel to convert the file adapter from Asynchrounous to Synchronous scenario.
While Triggering Data From Proxy the receiver request channel is placing the file in the FTP.
But the sender Response channel is saying that "No suitable Sender agreement found" error.
Also in the Audit log :SOAP: call failed com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error encountered while executing mapping: com.sap.aii.af.service.mapping.MappingException: 204 .
Getting the above error.
Also I need the Sender Response Channel to pick the file after 10 minutes of placing the file in the FTP by the receiver Request channel.
Please help on this.

My question is , can I use graphical mapping as I am using a java class for content conversion?
You can use as long as the structure generatde by the JAVA program is same as the source-message structure of the message mapping.
I have developed a java code for content conversion and it is working fine. How to use this .jar file in XI?
In my opinion this should be the adapter module....as the conversion needs to be done in the channel and inclucing it as a mapping wont help.
Regards,
Abhishek.

Synchronous scenario for SOAP to PROXY

Dear Experts,
    I will be working on the following scenarios.
XI will expose the Outbound Interfaces as a Web Service Interface. Web Service Description (WSDL File) will be generated for the Interfaces in Integration directory. DSS (decision support system) will use this WSDL file to define the data types and develop the Web Application. The Web Application sender sends the request message (Start Date, End Date and Table name) synchronously to XI using SOAP Adapter as communication channel. XI sends the message to SAP R/3 via ABAP Proxy. The ABAP Proxy extracts the data from SAP R/3 and sends the data back to XI . XI further passes on the data to DSS.
Request
Sender Application:     DSS
Target Application:     SAP R/3
Sender XI Adapter:     SOAP
Receiver XI Adapter:     XI
Response
Sender Application:     SAP R/3
Target Application:     DSS
Sender XI Adapter:     XI
Receiver XI Adapter:     SOAP
It's a synchronous interface. Please help me out right from the SLD design. I just want an idea how to proceed with this.
How many mapping will have to do? also very important point , can any one help me out, how to write an ABAP proxy for the same. I will have rewards for every answer as time is very very less and work is more.
Thanks
Veeru

Viru ,
So the Business systems will Web as ABAP for ECC and other will be third party. I am right.
Yes
Can u suggest me how to proceed with the mapping. Any snap shots for this scenario?
Mapping will be simple using Mapping editor in IR .
If u have please provide me.
for your refernce :
Few proxy based scenarios :
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d4db211-0d01-0010-1e8e-9b07fc2113ab
http://help.sap.com/saphelp_bw30b/helpdata/en/64/30063c66171b3de10000000a11402f/content.htm
I am working on XI 3.0 for this scenario. how to handle the webservices here.
for Web service based scenarios :
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
Regards ,

Synchronous Scenario SOAP to Proxy and Proxy to SOAP

Hi Sdn,
I am new to Synchronous Scenario.
Third party will send SOAP message requesting some information from SAP.
SOAP - > PI -> Proxy SAP
they are expecting a response Proxy - > PI -> SOAP.
Could you please let me know how to design teh Synchronous Scenario in PI .
Thanks

> Create DT and respective MT for Request and Response.
> Create Service Interfaces with Synchronous mode with respective MT's.
> Create Two separate MM with respective Request and Response MT's.
> Create Operation Mapping and call both Request and Response Mappings in it.
> Complete the Configuration part considering Sender SOAP and Receiver ECC Services.
> Configure CC with required parameters in Sender SOAP CC and Receiver XI CC.
> Generate wsdl from Sender agreement and save it as a local file.
> Use SOAP UI or any available Tool for testing purpose. Import the generated wsdl, provide input data and execute the test.
> If you are comfortable with expected result, deliver wsdl to the Sender Party.
> For Inbound Proxy, you can refer initial replies.
Hope it helps.!
Regards,
Sunil

SAP Client Proxy to Webservice Synchronous Scenario

Hi Experts,
I have an outbound Synchronous Scenario.In which i have to trigger a Client Proxy from SAP side and Connect to a WebService using PI.
I have with me the WSDl and URL for Webservice.Can anyone guide me with the necessary steps.
Regards
Gaurav

Hi gaurav,
From client proxy u have to send request and get the response back...
So, for this create 2 corresponding data types and message types. and mapping will be between request message type which u created and request wsdl message and another mapping for response wsdl message and response message type which u created.
create service interface outbound synchronous(give the message types which u created) and inbound synchronous(give the wsdl request and response messages).
Regards,
Sunitha

Java Proxy - XI - RFC Synchronous Scenario OUTBINDING Problem.

Java Proxy -> XI -> RFC Synchronous Scenario. Problem
Hi,
 I'm doing a Java Proxy -> XI -> RFC Syncronous Scenario.
 A Java Server Socket is running as a Demon. When a client make a request to the Java Server Socket, this one call Java Proxy Client and set up the parameters.
 The first time that execute the scenario it works perfectly but no the next one and so on.
 The error when I check the monitor (TCODE: SXMB_MONI) is in PLSRV_OUTBOUND_BINDING.
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="1" type="T">no outbound binding found.</Trace>
<Trace level="1" type="T">No standard agreement found for , DES210_DEV, , JPX_DEV, urn:servipago:SERVIPAGO_SAP_02, mi_os_t1</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
And it has sense, because my scenario doesn't begin with the execution of FM (RFC).
A Hint, my services in the first try are:
 Sender Service: JPX_DEV (Java Proxy Client)
 Receiver Service: DES210_DEV (R/3 4.6C)
But the second try and so on the services that I saw in the monitor are:
 Sender Service: DES210_DEV (R/3 4.6C)
 Receiver Service: JPX_DEV (Java Proxy Client)
I can't understand why they swich each other.
Any idea?

Hi,
Outbound binding problem is because of Reciever Determination/Agreement is not activated or refreshed correctly.
Try to recreate or refresh and activate it. Then check it.
also do the cache refresh in SXI_CACHE.
Also in go to Integration Builder(XI home page)->Administration->Cache Overview and do all the cache refresh.
Hope this helps
Regards,
Moorthy

No response message in Proxy to JDBC synchronous scenario

Dear Team,
I am working on synchronous scenario Sender ABAP proxy <===> SAP PI 7.31 <===> Oracle Database.All the necessary proxy configuration has been successfully tested.
Business Scenario:
ABAP proxy will send a single Vendor Id to Oracle DB as request and in return , it has to retrieve all the columns related to Vendor as response.Oracle Database stores all the Vendor information.There are 11 columns including the vendor Id in the view for the Vendor records.
Design :
For Request structure:
a-->Created MT for Sender ABAP Proxy with only 1 field for Vendor Id.
b-->Created MT for Receiver JDBC with Action as SELECT , Table with "View Name" , Access with Constant Blank for all 11 column and Key as Vendor Id.
I have been following the link and Bhavesh Kantilal document.
http://help.sap.com/saphelp_nw73/helpdata/en/44/7b7171fde93673e10000000a114a6b/content.htm?frameset=/en/44/7b7855fde93673e10000000a114a6b/f
rameset.htm&current_toc=/en/ca/b977f1c7814201954f20bb87ad7aab/plain.htm&node_id=71
For Response structure:
Created MT for Receiver JDBC with All the column names.
Created MT for target ABAP ECC with the same 11 column name of JDBC response.
Note :
1.Database team shared a excel file as a sample payload which has all the column names of a vendor and I created my DT with the same naming conventions as they are maintaining in their database i.e. Column names are in CAPs, in the same order and even the special characters in the column name.
2. The PING test connection for Cc works fine to database.
Please read out my queries as the I am not receiving any response from Oracle DB and gives error as timeout exception:
1.Since I am trying to retrieve all the column of the view , am I doing the correct procedure of putting all the column name in the JDBC request structure and making a Select statement. Can I add < * > to fetch all the column name and if so where can I add it.
2. Whats the difference between SELECT and SQL_QUERY and on what circumstances I can add it?
3. How can I test ICO in ID?
4. Can I use any SOAP tool to test the messages? Is there any functionality in NWA to test the messages directly to JDBC .
Hope all your inputs can improve my design part.
Regards
Rebecca

Hi Rebecca,
Did you go through all of these links below?
PROXY to JDBC- SYNC
Proxy to JDBC Sync, with Idoc Receiver
JDBC to PROXY Sync Scenario | SCN
JBDC Receiver Insert Statement Response
Re: Synchronous JDBC select
receiver JDBC structure
Regards,
Jannus Botha

Synchronous Proxy - SOAP Scenario (Error 500 in Response).

Hi
I've built a few Synchronous Proxy -> SOAP Scenarios,
with 'Do Not Use SOAP Envelope' option.
For two of them, I'm facing a common error.
The error is: ADAPTER.HTTP_EXCEPTION (HTTP 500 Internal Server Error).
When I paste the EXACTLY SAME payload picked up from XI, into the SOAP client, it works giving valid response.
Trying to figure out the issue.
R/3 System:
WAS 620 (Level 0041)
XI System:
PI 7.0 (Level 0007)
SOAP System:
BizRights (Approva) 3.0
Any help is appreciated.
Rajendra.

Hi,
Following SAP notes may help you- 804124, 807000
Regards,
Moorthy

Proxy Receiver Synchronous scenario

Hi EveryBody,
I am working on a synchronous scenario in which Proxy is receiver.
I have generated the PROXY for the inbound synchronous Interface and also have created a Program
in se38.
I need to call a RFC function module in the code and push the data from Proxy to RFC and also
have to send the response from RFC to XI via Proxy.
Can somebody help me out on the same?
Helpful answers will be rewarded points.
Thanks,
RK

Hi Rupash,
For example...
method ZXI_II_MI_PROXY_IN_DNI_NOMBRE~EXECUTE_SYNCHRONOUS.
**** INSERT IMPLEMENTATION HERE **** ***
DATA:
lv_ID type char10,
lv_NAME type char30.
lv_ID        = input-MT_PROXY_DNI-DNI.
*lv_NAME      = input-MT_PROXY_DNI-NOMBRE.
CALL FUNCTION 'ZXI_001'
EXPORTING
   P_DNI          = lv_ID
IMPORTING
   P_NOMBRE = lv_NAME.
output-MT_PROXY_NOMBRE-NOMBRE = lv_NAME.
endmethod.
FUNCTION zxi_001.
""Interfase local
*" IMPORTING
*"     VALUE(P_DNI) TYPE CHAR10 OPTIONAL
*" EXPORTING
*"     VALUE(P_NOMBRE) TYPE BEZEI30
CHECK NOT p_dni IS INITIAL.
SELECT SINGLE nombre INTO p_nombre
   FROM zxi_0001
   WHERE dni = p_dni.
ENDFUNCTION.
Regards,
Carlos

Werb services to proxy- synchronous scenario

Similar Messages

Maybe you are looking for