Were any reboot after sleep problems NOT fixed by the EFI firmware update?

The subject says it all. I wanted to get a read on whether this EFI update really did solve the reboot after sleep problem for all 2008 Mac Pros. If have an early '08 Pro that had the problem before the update and it didn't go away after the update (and it's not due to some other problem like kernel panics, etc.), then please post details in this thread. thanks!

We have 4 total systems (all had the issue, all slightly different configurations) and the reboot-on-wake issue has disappeared on all 4 of them.
Looks like a definitive fix to me.

Similar Messages

Slow Booting time after installing MacBook Pro EFI Firmware Update 2.0 on 13 Inches Mac 2010 model

I'm experiencing a slow boot time after my computer installed a MacBook Pro EFI Firmware Update 2.0 itself on 13 Inches 2010 model, how to downgrade or fix it?
My computer is starting 2 times slower then it should be, why Apple done this to me?
Please help who really know somthing about Macs.

I have the same problem, especially when I open my laptop from sleep. It takes at least 2 minutes for the computer Internet connection to work.
Never had that problem prior to the last firmware update 2.7.
Is there a way to revert back to 2.6?

EFI Firmware update 1.4 - Mac does not shut down

I am trying to install the EFI Firmware update 1.4 on my Macbook. The initial steps load correctly but when it is time to shut down the computer via the EFI update software, I keep getting the message that the laptop needs to be plugged in to a power source (which it already is). When I click ok, it just continues to repeat the message.
I cannot get past this stage to continue with loading the update. Does anyone know how to bypass this? Many thanks.

I've had issues similar to this, but not exactly. For me it was that the computer would never shut down, i left if over night one time and it kept going. try booting off the disk and checking your disk integrity and repairing permissions. That's what fixed my problem.

EFI Firmware update 1.4 was not successful, no progress bar

I have a MacBook Pro 2.16 Core 2 (MBP22.00A5.B02). Software update prompts me to download and update the Firmware 1.4 udpate. After following the instructuions, shutting down the computer, and restarting holding down the power button, I hear the beeps but nothing comes up but a blank (grey/white) screen. After several minutes (like 10) it restarts and the updater returns and shows not successful.
I tried to archived and reinstalled the OS with no luck
I have a 160GB Hitachi HD that came as ordered when I bought the computer new.
I have verified that the HD is GUID partition scheme
Only upgrade I have done is an extra 1GB stick of samsung original memory from OWC
I was hoping the firmware update might help cool down (and quiet down) this noisy "pro" laptop, but no luck. Please help someone.
Console shows:
2007-10-18 16:27:08.270 MacBook Pro EFI Firmware Update[189] MacBook Pro EFI Firmware Update version 1.4
Run the executable in the Contents/MacOS folder with '-h' option to learn about running remotely.
2007-10-18 16:27:08.272 MacBook Pro EFI Firmware Update[189] OS version is 10.4.10 build 8R2232.
2007-10-18 16:27:08.275 MacBook Pro EFI Firmware Update[189] No AppleEFINVRAM
2007-10-18 16:27:23.309 MacBook Pro EFI Firmware Update[189] EFIUpdaterController::showError:1
2007-10-18 16:27:23.309 MacBook Pro EFI Firmware Update[189] CommonUpdaterController::showError:1

Hi macinfrance!
I installed the EFI Firmware update successfully on my computer.
It seems to me that your list of nvram is lacking an entry telling your bootloader (boor.efi) exists on your normal harddrive partition.
I suggest the following (i am not quite sure if it will work):
1. Go to the system preferences and select the startdisk fane. Then, be sure to select your system harddrive.
2. Then restart your computer.
3. Make a restore CD in case something goes wrong (instructions at: http://www.apple.com/support/downloads/firmwarerestorationcd14.html )
4. Try the firmware update again.
When i type nvram i get the following contents:
084202115164:~ dagdiesen$ nvram -p
efi-boot-device <array ID="0"><dict ID="1"><key>BLLastBSDName</key><string ID="2">disk0s2</string><key>IOMatch</key><dict ID="3"><key>IOProviderClass</key><string ID="4">IOMedia</string><key>IOPropertyMatch</key><dict ID="5"><key>UUID</key><string ID="6">C68ABA3F-9D52-4699-AA58-69DDF3DCB1FF</string></dict></dict></dict></arra y>%00
efi-apple-payload0-data %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%02%00%00%00%00 %00%04%01*%00%01%00%00%00(%00%00%00%00%00%00%00%00@%06%00%00%00%00%00qS%00%00%f2 U%00%00%9eP%00%00%f6U%00%00%02%02%04%04^%00\%00E%00F%00I%00\%00A%00P%00P%00L%00E %00\%00F%00I%00R%00M%00W%00A%00R%00E%00\%00L%00O%00C%00K%00E%00D%00%00M%00B%00P%002%002%00_%000%000%00A%005%00%000%007%00B%00.%00f%00d%00%00%00%7f%ff%04%00
efi-apple-payload0 <array ID="0"><dict ID="1"><key>BLLastBSDName</key><string ID="2">disk0s1</string><key>IOMatch</key><dict ID="3"><key>IOProviderClass</key><string ID="4">IOMedia</string><key>IOPropertyMatch</key><dict ID="5"><key>UUID</key><string ID="6">00005371-55F2-0000-9E50-0000F6550000</string></dict></dict></dict><dict ID="7"><key>IOEFIDevicePathType</key><string ID="8">MediaFilePath</string><key>Path</key><string ID="9">\EFI\APPLE\FIRMWARE\LOCKEDMBP22_00A507B.fd</string></dict></array>%00
boot-image %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%02%00%00%00%00 %00%04%01*%00%02%00%00%00(@%06%00%00%00%00%00`%0b%ef%0d%00%00%00%00?%ba%8a%c6R%9 d%99F%aaXi%dd%f3%dc%b1%ff%02%02%04%04%18%004%00a%00a%006%00e%007%000%000%000%00% 00%00%7f%ff%04%00
SystemAudioVolume n
efi-boot-device-data %02%01%0c%00%d0A%03%0a%00%00%00%00%01%01%06%00%02%1f%03%12%0a%00%02%00%00%00%00 %00%04%01*%00%02%00%00%00(@%06%00%00%00%00%00`%0b%ef%0d%00%00%00%00?%ba%8a%c6R%9 d%99F%aaXi%dd%f3%dc%b1%ff%02%02%7f%ff%04%00
The first entry is referring to the normal system partition where the loader for the Mac OS resides. The second entry is referring to the hidden EFI partition on the harddrive and the new EFI firmware image.
Hope this helps.

My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forc

My problem is after updating to Yosemite does my mail client any longer. I can not even open the mail, and when I "forced closes" mail and try to open it again to go in the entered settings running the colored wheels around and allows me only to forcing close again? does anyone have a solution to the above problem?

You mean the default OS X mail app? Try reinstalling OS X Yosemite if that's the case.
If you are referring to 3rd party mail applications, that's a compatibility issue. Some apps don't work in the new operating system. You have to wait until the developer updates the app, or you have to revert back to Mavericks to continue using it.

I can't play any purchased movies. Sounds like it is the 6.0 update. So what is the fix? Am I just stuck not being able to use my Apple TV until...?

I can't play any purchased movies. Sounds like it is the 6.0 update. So what is the fix? Am I just stuck not being able to use my Apple TV until...?

Sorry I can't help but I have potentially a similar problem.
We have an Apple TV 3 and after the most recent software update (potentially coincidental timing), our purchased movies & TV shows will no longer play for our US account. We can play previews but that's it. We also tried renting a new movie but that didn't work either. No error messsage, just select play, it thinks about it, then returns you to the same screen again.
Any help greatly appreciated.
Thanks

After "sleep" keyboard not responding, mouse is working ok (mouse is wireless, k/board is not)

after "sleep" keyboard not responding, mouse is working ok (mouse is wireless, k/board is not)

Probably a defective keyboard. I had that problem a few months after I got my Mac Pro. Apple replaced the keyboard and it has worked fine ever since.

Any plans to fix wireless networking after the 40S51U Firmware Update 2.2.5 broke it?

After the 40S51U Firmware Update 2.2.5 wireless passwords must be re-entered every time the device is powered on. It's been almost 4 months since the untested patch was released – is a fix coming?

You're the only person I can remember having that issue. You should call customer support.
- Peter

Problems with EFI Firmware Update to 1.5 for mid 2010 Mac Pro, and sleep issues

Hello to the community, I have run into an annoying issue.
I need to update the EFI firmware on my 8 core mid-2010 Mac Pro. I downloaded the EFI update from the apple website from here : http://support.apple.com/kb/DL1321
But everytime I download it, as I click to install, it gives me the message:
Alert
This software is not supported on your system.
But clearly this is the correct EFI for my computer. I tried burning the Firmware restoration onto a CD from here:
http://support.apple.com/kb/DL1320
But the computer did not respond the way it said it should (with the 3 flashes/beeps etc.) and have the optical drive open for the CD.
So I'm completely stuck.
*Also my Mac Pro had issues with sleep, when I put it to sleep, sometimes when I try to bring it back, it restarts itself, and other times, it just turns itself on and the monitor screen remains black, so I have to hit the power button to turn it off then back on again. This only happnens when the computer has been put to sleep for a slightly extended period of time, roughly 20mins +, sometimes longer. I was trying to solve this problem by first updating the firmware because I think it could be related to that, but I've had this problem with the firmware so I couldn't find out. This is actually the bigger problem for me because it will affect my work. I am currently using an iMac while I fix up this mac pro.
I'm a music composer so I've upgraded many aspects of my system due to work. I have a 1TB Samsung 840 evo SSD, 2 seagate 2 TB HDD, and 1 WD 1TB HD (the original one in the mac pro), along with 32 GB of RAM. So my only problems are the firmaware and the weird activity when the computer is put to sleep.
Some help would be greatly appreciated!
I'm running OS X Mavericks 10.9.2
mid-2010 Mac Pro
8 core processor (2 X 2.4gHz)

According to this article, your EFI firmware is up to date:
Computer
Model identifier
EFI Boot ROM version
SMC version
Mac Pro
Mac Pro (Late 2013)
MacPro6,1
MP61.0116.B04 (EFI 2.0)
2.20f18 (SMC 2.0)
Mac Pro (Mid 2010)
MacPro5,1
MP51.007F.B03 (EFI 1.5)
Mac Pro (Early 2009)
MacPro4,1
MP41.0081.B07 (EFI 1.4)
Mac Pro (Early 2008)
MacPro3,1
MP31.006C.B05 (EFI 1.3)
Mac Pro (8-core)
MacPro2,1
MP21.007F.B06 (EFI 1.2)
1.15f3 (SMC 1.1)
Mac Pro (Original)
MacPro1,1
MP11.005C.B08 (EFI 1.2)
1.7f10 (SMC 1.1)
EFI and SMC firmware updates for Intel-based Macs

When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https:

Question
When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?

Try some basic troubleshooting.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

After installing an SSD into my optical bay, I've found out I need EFI Firmware Update 2.2. I can only find 2.3 which is not supported on my Mac. What can I do?

You do not want EFI 2.2, it bricked many 2011 MacBook Pro machines.
EFI 2.3 is the fix. Software Update should install it if you need it, but it goes to the boot drive as that's where the hidden EFI resides.
Check out this link of machines and their EFI versions
https://support.apple.com/kb/HT1237
Also if your SSD should be in the hard drive bay as it makes a better boot/applicaitions drive, not a good storage drive as it wears out with repeated use and is not "scrubbable" like a regular hard drive
The hard drive should be in the optical bay and used as a storage drive, you have things all messed up inside your machine, Apple doesn't support or expect the optical drive to be used as such to begin with, then as a boot drive is just asking for trouble. So use the optical bay as storage and not as a boot bay.
Also you can't install OS X or Windows or use a Firmware restore disk because it only works from a internal optical drive, which you have removed.
https://support.apple.com/kb/HT2213
You need to learn all about cloning etc., as you have no other means to boot the machine.
https://discussions.apple.com/message/16276201#16276201

Rented movie does not play after download if not connected to the internet

rented movie does not play after download if not connected to the internet

Hello b noir.
Thank you for your interest in solving my problem.
What I did I opened iTune. I read the information about what does my computener need to play back a rented movie. My computer is okay to play back rental movies. So I went to the iTunes store, I searched for the movie I want to watch, i singned in into my Mac account and I bought the movie. The movie started to download to my computer, it took some time because I bought a HD version, but it never stop and after a couple of hours or little less the movie was in the Rented folder of my iTunes and also I checked to be sure that was in the movie folder. So, next day I open iTunes and click on the movie, it opens but I wait for five minuetes and never started to play back, so I tried several time and I looked for info in different internet forums but I couldn't find anything that help. So I posted the problem in this forum and also I called Apple. Apple contacted me and they let me to download the movie again. So I did it and now I will watch the movie later. Not sure if the movie will play back normally or if I am going to have the same problem. I'll keep you posted.
Apple representative did not know why this happened.
Thanks.

Battery not working after Apple software EFI firmware updated

Hi, My Macbook Pro (C2D 15inch 2.5GHZ) battery stop functioning after I applied Apple software EFI firmware update.
I'm using Newtech NuPower® (High Capacity) branded battery.
Problems after applied EFI update;
- Battery not charging
- Indication dispalays 0%
Anyone having a same issue?

OWC responsed tonight that they will replace my battery.

After Effects is not available in the apps list

After Effects is not available in the apps list on creative cloud that I just downloaded.
I tried to download it from the site, but It would automatically launche creative cloud which, again, doesn't include after effects !!
What should I do ?

Apparently I'm using 32-bit operating system
and AE requires 64-bit support.

TS1702 Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Any suggestions

Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Has anyone got any suggestions. Thanks

If you don't tell us what solutions you've already taken, we're probably going to waste a lot of time telling you to do things you've already done.

Were any reboot after sleep problems NOT fixed by the EFI firmware update?

Similar Messages

Maybe you are looking for