WES610N -- turn off LEDs?

I recently got a WES610N to connect the devices in my home entertainment center.  Setup was a snap, it works beautifully.  The problem I have is that the blue blinking LED lights are a huge distraction!  Every other home entertainment device I own has a way to dim or turn off the lights, often called a night mode.   Once the device is up and running I don't care about the information the LEDs give me.  Is there a way to hide these lights, short of taping something over them?

According to the scenario there is now way where you make the WES610N to a night mode or to off the LEDs. Well you can try to cover up the light if required.

Similar Messages

  • How to automatically turn off leds after 1 minute/button press

    I need help on how to turn off my LEDs 1 minute after my program starts or when the stop button is pressed.. I tried putting a while loop over the LEDs but it doesn't work.. Also the score automatically resets after 1 minute.. how do I maintain the score while turning off the LEDs? thanks.
    Attachments:
    FYP_3.vi ‏71 KB

    Find the example programme for ur need.Hopes this helps.
    Balaji PK (CLA)
    Ever tried. Ever failed. No matter. Try again. Fail again. Fail better
    Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.
    Attachments:
    Boolean On Off.vi ‏15 KB

  • MSI GTX 580 Lightning Xtreme Edition Turn Off LED's?

    Hello all MSI users.
    Strangely enough, I only heard about MSI Products since last night, and I knew straight up, I needed to get my hands on one of these outstanding products.
    The only thing that is holding me back from getting this amazing MSI GTX 580 Lightning Xtreme Edition is the question of if there is posibility in the utilities or on the card itself to turning off the LED's completely?
    (then of course turning them back on without damaging the GPU or the LED's.)
    The reason why I ask is, I usually leave my PC on over night to do either some long Downloads, a Defrag or a Deep Virus Scan, and as my PC is technically next to my bed, I don't want to be kept up all night with it shining in my face and then having to chuck a T-Shirt over the top of my case.
    Please inform me if there is any possibility of this to work without having to go to some 'Xtreme' to turn the LED's off.
    Much Appreciated Guys.

    not possible, when VGA is in IDLE there are less amounth of LEDs that's active.
    you can place a piece of black tape over leds to "disable" them

  • How to turn off LED near modem connector

    T500 has an amazingly bright green LED on the left side between the modem port and the DVD drive. It is on all the time, from what I can tell. Any way to turn it off - find it very annoying...

    A black Sharpie pen is how I deal with this common problem with today's electronics.
    T400 - 7417CTO, T9400, GMA 4500MHD, Vista Ultimate. 14.1 WXGA+ w/ LED Backlight, 2 GB DDR3, 160 GB Hard Disk 7200rpm, CD-RW/DVD-ROM, 4 cell Battery, 7-1 Media Card Reader. Intel WiFi 5100(AGN)

  • Is there a way to turn off a 24" LED Cinema Display without unplugging it?

    I recently bought a 24" LED Cinema Display to use with my Macbook Air 13".  However, it doesn't seem to have an "off" button.  When I close the MacBook Air, the display is active - so it can be used with peripheries - but I'm not sure how to turn it off safely.
    If there is no way to turn it off, which I suspect is the case, is it best to disconnect from the computer or from power to turn it off each day?
    Thanks for any suggestions.

    Hey ASMNYC,
    While the Apple 24" LED Cinema Display does not have an off switch as such, and can not really be turned off short of disconnecting from power, it is possible to put the display into a low power consumption mode - display sleep. See this article for more information about Energy Saver modes -
    About Energy Saver sleep and idle modes in Mac OS X - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • How to turn off screen on Macbook Air when connected to Computer LeD monitor?

    How to turn off screen on Macbook Air when connected to Led monitor screen?

    The only way you can turn it off is to close the lid - so you would need an external wired or wireless keyboard and mouse/trackpad attached.
    Matt

  • How to turn off the wi-fi led (f12)?

    my Pavilion dv6-6c60el has F12 wi-fi led always lit.  Can't switch off hitting f12, Control F12,FN F12, every combination.
    Note that wifi connection is disabled because i'm connected via lan.
    thanks, Tommaso

    Tommaso
    It might be a case of one man's "it makes me crazy" to another's "The light is good" kind of a thing.
    I do not know of a "for sure" way to turn off the button light.   Various methods have been suggested on Google.
    =====================================================================================
    The following solution may work IF you are running Windows 7 or below.  This is NOT a solution for Windows 8.
    Wireless assistant for many systems running Windows 7, Vista, XP.
    HP Wireless Assistant sp49018 V3.50.12.1
    Installing and Using HP Wireless Assistant
    ===========================================================================
    Workaround - One Definition:
    A method for overcoming a problem or limitation in a program or system.
    You might, for lack of wishing to damage the keyboard, use a tiny bit of electrical tape to block the light.
    IF you are going to be the ONLY owner of the computer and you never want to see the light again, dab it with a bit of black model plane paint.
    If this is really making you nuts, you can take apart the system hardware and perhaps disconnect the light at the source.
    =====================================================================================
    Side Bar:
    Though it may cause side effects, that of causing your Wireless / Bluetooth to become unusable or unstable, you could set the Device Manager for the wireless and bluetooth drivers to allow the system to turn OFF the driver "to save power".  I have no idea whether this will work and it does have the aforementioned side effects.
    Example:
    Windows 8:
    Windows key + X > M (opens the Device Manager)  >
    Windows 7:
    Control Panel > set icon view > Device Manager >
    Next...
    Network Adapters >
    Right-Click your Wireless Adapter > Properties > Power Management >
    Select as appropriate:
    UNCHECK “Allow computer to turn off this device…”
    UNCHECK “Allow this device to wake computer” >
    OK
    Windows key + X > M (opens the Device Manager)  > Bluetooth >
    Right-Click your Bluetooth Adapter > Properties > Power Management >
    Select as appropriate:
    UNCHECK “Allow computer to turn off this device…”
    OK
    ====================================================================================
    Good Luck!
    Kind Regards,
    Dragon-Fur

  • If I turn off Mac Mini Mid2011, LED doesn't turn black.

    I turned off the Mac Mini Mid 2011. BUT, the Mac Mini's Light(White LED) doesn't want to turn off and the only way to COMPLETELY shut down is to force shut down.I'm worrying about bad sectors so I'm asking.
    Is there any way to solve?

    mazwig wrote:
    I just want to know if I turn off iMessages and iCloud Back up, and ONLY use SMS myself and my family just SMS's me - and do this on my PHONE ONLY and not touch his ipad (so he doesn't know), if he will get any of my messages I send or receive on his ipad please. Its just a temp thing and I just want to take action myself on my own phone and want to know if this will work. Does anyone know?
    SMS messages will not go to the iPad Mini. It's not capable of receving them. If you have access and can do it without it causing a problem, remove your iPhone from the Apple ID Support profile:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "Edit Products"
    Click on the "X" to the right of the product.
    Click "Unregister"
    If anyone in your family uses iMessage, they will go to both you and your boyfriend unless you do that.
    To be completely safe, you may want to simply use an alternate message app such as Skype, Viber, Whatsapp (assuming everyone has a smartphone) until the issue is resolved. Google Voice will also allow you to send and receive texts to another number on your phone.
    Best of luck.

  • My 27' Led cinemadisplay turns off when I am working

    Hello,
    A couple of weeks ago, my Led cinema strated to turn off while I am working, it only turn on again when I unplug and lug again the electric socket.
    I am already tried new socket, new cable. It happend in my office and in my house. So it is something with the display.
    This now happend many times and its very annoying.
    What should I do?
    Thank you

    Hi this post might help https://discussions.apple.com/thread/2782776?tstart=0

  • GT70 Turn off Display LED Backlight

    Does anyone know how to turn off the DISPLAY LED Backlight when using an external monitor on a GT70 running 64bit windows 8?

    You mean display all only on external?
    Just righclick desktop and go to resolution setting. Set screen output only on external. You can do it in Intel graphic card settings too.
    You can use Fn button on keyboard too. If i good rember FN + F2(just check images on buttons).
    If you want to have 2 monitors but from some reasons you want to turn of screen on build in for some moment there is button to do next to power button 0 right side.

  • Charge led blinks every second when Laptop NX9420 is turned off.

    I have a new battery, in a HP Compaq NX9420 and it can run the laptop for 2 hours isch,
    it can also run it on power adaptor only, battery removed, so both battery and charger is ok.
    But,
    When turning off the laptop from within windows it goes off and all is normal, after some 3-12 hours the charge led starts to blink amber/orange every second, if I press on/off button nothing happens, I have to remove the battery and slap it in again then it starts,
    (after pressing on/off ofc.) the battery is slightly drained what I can see?
    checked everything in bios but nothing
    tested also HP Battery check and it says all ok.
    Motherboard busted?
    RTC battery weak? I still keeps track of time and settings bioswise.

    Hi,
    I don't know people call this but we normally call it as an "handsake", all smart batteries should do this way.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to turn OFF status LED on VC220?

    I'm looking for a way to turn off the status LED on a VC220.  This is not the IR LED, but instead the large blinking LED on the front.
    The documentation mentions that it can be turned off, but I can't find a menu option for this.
    Thanks for your help!
    --Joe
    Status LED
    Indicates the following status:
    LED Off—The power is off or the LED status is turned off.
    Flashing green in one second intervals—The camera and network is functioning.
    Steady orange—The camera can’t detect a networking signal; thus the camera is not functioning. For example, the Ethernet cable is not attached.
    Flashing orange—The PIR sensor noted movement. Flashing green rapidly—The firmware is being
    upgraded.
    Flashing orange rapidly—The camera’s default settings are being restored.
    Alternating flashing green and orange—Video has been lost.

    Joe,
    Use the Network Setting > IP Setting page to set the IP address and other related
    settings. When you complete the configuration, click Save to save the settings;
    otherwise click Cancel to discard the changes.
    • Disable LED Operators—Select to disable the LED illuminators. You may
    choose to do this if you don't want to alert others that the network camera is
    on. Use the Network Setting > IP Setting page to set the IP address and other related
    settings. When you complete the configuration, click Save to save the settings;
    otherwise click Cancel to discard the changes.
    http://www.cisco.com/en/US/docs/security/csbvsc/vc220/administration/guide/VC220AdministrationGuide.pdf
    page; 41
    Hope this is what you're looking for,
    Jasbryan

  • Turn off the status LED or make it a stable light

    As I remember, with earlier Time Capsule or Air Port Express models, there was an option to turn off the green LED status light or make the light stable so it does not flicker when data is being transferred.
    I think had my previous (recently departed) Time Capsule set to this mode, so I had a stable green light instead of nervous flickering with every transfer of data.
    I just installed a new 3 TB Time Capsule. Can I toggle the light setting somewhere in the actual version of AirPort Utility? I did not find any possibility to do that.
    Best,
    Georg

    Can I toggle the light setting somewhere in the actual version of AirPort Utility?
    Apple removed the settings in AirPort Utility 6.x versions regarding the options on the light.
    If your Time Capsule is operating normally, it will have a steady green light.
    Flashing amber indicates that the Time Capsule has a message for you.
    No light indicates that the Time Capsule is not currently powered on....or it has died.

  • Please add LED turn OFF option for DL2100

    If there is an option for LED turn off on EX2, why can't it be on DL2100, since it's basically the same OS ?Please add this option on this device, thank you !

    Hi Rahul,
    Which release of Oracle Applications are you on?
    Regards,
    Mohammed

  • My Power Led Not Turn Off

    hello,
    When i turn off my PC " Manually (With the Button)" the power led stays always on. When Windows Turns off the PC the led turn off. I don't understand what's happening.
    Help me!!!

    Hi:
    Did you make sure that the cables are connected the way it should?
    Look at your MOBO manual and see how to connect the power led. Maybe you're missing something.
    Edyros!  

Maybe you are looking for