Westell 2100 Stopped Working

All right, I've been trying to fix this thing myself, but I've only become more confused. I'm no computer expert, so I'll have to be walked through any suggestions if it comes to manually changing an TCP/IP or something.
I've had this Westell 2100 in my service for years with no problems, then suddenly, it stopped working! I went through the usual, turn of the modem, wait, turn back on, hold reset button for 30 sec, etc. But no luck. The Ethernet light is solid green, the power is solid green, but the ready light is blinking slowly. Apparently that means it's trying to connect, but I can leave it there for an hour with no changes. I thought maybe it was a problem with the phone cable, so I switch to a new one. Still no changes.
Then I came here and saw a post somewhere saying that service to Westell 2100 was discontinued? Does that mean I'm not getting service simply because of my modem and I need to buy a new one? I want to make sure before I go out and buy one, only to find out it won't work either.
I don't know if this means anything but, we asked Verizon to stop our landline phone. I'm pretty sure the modem was still working for a little while afterward, but I can't remember.
Any help, please? I miss my home internet connection.

My frist thought would also be your service disconnection. I had a simmilar experince happen with another compeny many years ago.
However if by chance that isnt the cause. Than then I would suspect one of a few things. The top ones is ether the jack went bad(I seen this happen on a computer I worked on) or my brother had his modem go bad despite the fact he just got it. Then of course there's the chance the line was damaged or a filter messed up(Assumming your using filters).
Hope this helps.

Similar Messages

Adobe Premier Pro CC Has Stopped Working

Hii guys I just installed the premier pro cc on my windows 8 pc and when I try to open it, it just stop working...why is this happening ?
My PC is working with an intel(R) core (TM) i3-2100 CPU @3.10 GHz
4 GB ram
64 Bit

Hi,
Here's how to install the previous versions:-
Creative Cloud Help | Install, update, or uninstall apps

TNSping ok..can't connect with sqlPlus ...just stopped working

Hey Guys,
I have an Oracle Server running for the last year with little issues.
The lister just stopped working...
I can TNSPing ok...I just can't connect with toad or sqlplus anymore from another computer..
I can connect with sqlplus on the same computer...just not from any other computers.
=================================================================
C:\Documents and Settings\Phil>tnsping elvis 5
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 17-JUL-2008 11:10:28
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=7.7.1.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)))
OK (70 msec)
OK (40 msec)
OK (50 msec)
OK (50 msec)
OK (40 msec)
C:\Documents and Settings\Phil>
==================================================
Listener status info
================================================
LSNRCTL>
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.4.0 - Production
Start Date 17-JUL-2008 10:45:26
Uptime 0 days 0 hr. 29 min. 2 sec
Trace Level off
Security ON: Password or Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.1.0\Db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
LSNRCTL>
LSNRCTL>
LSNRCTL>
==================================================
Listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
====================================================================
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
====================================================================
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
=============================================================================
I am getting this error from sqlnet.log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 17-JUL-2008 10:23:14
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

LSNRCTL>
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=elvis)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:18 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: ELVIS, pid: 2284>
(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1027))
The command completed successfully
LSNRCTL>

WRT54G and Westell 2100

This problem may have previously been answered, but I can't find exactly my problem. I currently have a wired desktop, DSL through Bellsouth, Westell 2100
modem connected by USB. My desktop has no ethernet port. The modem has one
ethernet connection and one usb. I bought a laptop to use in other parts of the house and a Linksys WRT54G router. I cannot access the internet from laptop wired or not, but the router has a full signal. I switched the modem to bridged mode, but had no internet on either desktop or laptop....everything is now set back to default.
I was told I could not have internet on both at the same time. Is there a way around this? If not, I still need to be able to access internet with wireless laptop but that's not happening either.
Help! Someone!

you need to make sure your westell and router are configured properly. there are issues with at&t/bellsouth westell's and linksys working together properly. you can find that info over here, http://www.dslreports.com/faq/6323 i use the same exact setup you do and once i followed this, it worked perfectly. hopefully that will help you.
well, you go have fun with that.

I am FRUSTRATED! My goal is to create a wireless network using an iMac, a Westell 2100 modem (and router)

I started with a PC, the Westell 2100 modem (also a router) and the Linksys WRT54G. I set it up according to instructions I found on the Internet, and it worked fine for YEARS!!! Then, I switched to an iMac. After problems with the setup, I found help on the Internet, and got it working. It has been a long time since then, and I have had to disconnect things, and I do not remember how to set it up. I have searched the Internet, but cannot find a solution. I have searched the community, and followed some instructions here, but I have had no success. I know the following:
The Westell 2100 works as it should. I can connect directly to my computer and access the Internet.
The Linksys WRT54G has not been damaged.
At one point, I had set the SSID and had a WEP/WAP key that is HIDEOUSLY long. Here are some more tidbits: WPAPSK TKIP.
Please help! My new iPhone 4S(teve) needs it's wireless connection to Wi-Fi .

Pleeeze help???

Replacing Westell 2100 Modem with 6100

I am next to clueless with this stuff, so be kind. I've been having to reboot my 6 year old 2100 at least once a week to get my max DL speed back. Verizon sent me a 6100 to replace it in hopes that it might solve the problem. I swapped all the connections, but the Internet light on the 6100 stays red. What do I need to do to get the 6100 up and running? It came with no instructions. Do I need to call Verizon and have them enable it or whatever? Thanks.
Solved!
Go to Solution.

Strange thing, I always had a Westell 6100 with my netgear wireless for 3yrs now. Went from 1meg to 3meg with no modem reboot issues but when i got to the 7meg plan and now the 10/15meg plan, I have to reboot my westell like clock work almost every 7 days...no one knows why and I have not changed anything but the plan upgrade. I suspect V is doing something with the line regularly. But the thing is its not a nightly or off hours issue...it could be AM, noon or early PM when this happens but the sequence seems to be every 7th day or so. It happened today for the first time on my new 10/15 meg plan. I have a new verizon 7500 modem/wireless combo that i may try to see if it fixes that. But otherwise never had issues with the westell 6100/netgear combo i have on 24x7.

T42P Wireless Stopped Working - can't aquire network address

Hi,
I have a T42P which has run wireless for years with no problems. All of a sudden it stopped working. It has a very good signal strength but hangs when "acquiring a network address"
I have updated the driver for the Intel PRO LAN 2100 3B to 1.2.5.37. I am running XP SP3.
I have 3 other wifi devices that connect to the network without any issues
Any help gratefully received
thx

This worked for me, quoting from an earlier post of mine. My T60 was stuck in perpetually "acquiring network address" (wired or wireless) If that is your problem try this:
I think I may have found the fix. According to microsoft the problem can arise when winsock gets corrupted, either as part of a service pack upgrade or when NORTON is uninstalled.
The fix can be found at
http://support.microsoft.com/kb/811259#FixItForMeAlways
on that page you will find a section titled "fix irtfor me" This will rewrite your winsock file. So far it seems to have worked
Cross you fingers.
You can see if this is the problem by going
control panel
adminstrative tools
component services
services local
and then manually start DHCP CLIENT (and if needed) WIRELESS ZERO CONFIGURATION
You should be ablre to connect then

Wireless suddenly stops working, no idea why......

Over the last two days, my wireless router has just kinda stopped working. I've lived in a two story home since April and when I had my services moved over, the router was placed in an area where it would be about the same distance from devices on either side of the house. We've had absolutely no problems since the installation 5-6 months ago. This is with Computers/Laptops upstairs and down, as well as gaming consoles and an iPad.
Everything has worked seemlessly....until about two days ago.
Out of nowhere, literally....most of our devices upstairs away from the router couldn't even find the network at all and the ones downstairs were extremely slow.
After contacting Verizon and troubleshooting it (to no avail), they've decided to ship me out a new router which I guess will be here next week but I just am having trouble understanding why it just stops working out of nowhere. The router hasn't been moved nor have any settings been changed.
The guy on the phone had me reset the battery box out in my garage and that did absolutely nothing but after doing some research on my own, it seems the router/modem is a piece of junk and tends to quit working after a little while.
When I hardwire myself into the router, it works without fail but the wireless aspect of it has just curled up and died on me over the last few days and I'm simply at a loss as to why and how this isn't something I should be able to correct on my own.
I have Fios and I pay for one of the higher speed packages, I don't recall which off hand but the router that I have Actiontec MI424-WR Ref F.
Anybody else have issues with this thing dying? If so, any way to fix it/make it work?
I understand that Verizon has shipped a "new" router to me but it won't be arriving until probably next week and I have to get this figured out sooner than that for my online classes if at all possible.
Halfway tempted to just go buy a modem/router.....

Log into the Westell at http://192.168.1.1/ (same goes for ActionTecs) and visit the Wireless Settings. Disable Automatic Channel Selection, and choose Channels 1, 6, or 11 to use, whichever gives the best performance, range and stability. Make sure, before applying the settings you ensure a check box for Remembering your settings through reboots is checked, this way the settings remain permanent.
The FiOS routers should be using a login of admin for the username, and the router's serial number as the password.
========
The first to bring me 1Gbps Fiber for $30/m wins!

IChat Video Stops Working

Hello
I just upgraded to Leopard doing a clean install. I went to try a video chat with someone and it would not connect at all. So I went to try the test name appleu3test01 which also failed to connect.
I use a Westell 2200 modem with static NAT on to forward all ports my computer. I have tested to see if all ports are correctly opened, and indeed they are. I decided to connect using PPPoE directly from OS X and video started working! However, after a few hours, I went to try again and it failed.
Why would this randomly stop working like that? Even if I don't use the computer it stops working after a few hours.
What could be causing this randomness? Oh, I have the firewall set to Allow all incoming connections, too.

I figured out the problem!
Turning off Internet Sharing resolved the issue and allowed me to connect properly. I know this is not a work around everyone can do, but it works. We shouldn't have to turn that off, though. =[

Itunes wont open and gives me a message saying "Itunes has stopped working". What can I do to fix this?

I use windows vista and I have upgraded my itunes. Now when I open it, it gives me a message saying "itunes has stopped working" and then gives me a message saying it will notify me for a solution. What can I do to fix this so it can open and not give me any more problems???

First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)!

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

Since I installed a printer software Satellite L300 has stopped working

Hello there!
I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
when i load it up it goes to Windows error recovery:
'windows has failed to start.a recent hardware or software change might be the cause
if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
then it gives two options: Launch startup repair (recomended)
start windows normally
==========
-so i click launch startup repair (reccomended)
-then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
========
5 years ago Report Abuse
Additional Details
so i just click 'next'
========
then i have 5 options:
-startup repair
-system restore
-windows complete pc restore
-windows memory diagnostic tool
-command prompt
==========
startup repair says it cannot manually fix any problems
-system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
-windows comple pc restore says i need to insert a backup disk which I dont have
windows memory diagnostics tool says that windows is preventing this
============
but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
but i don't know where...i typed it in the command prompt but don't understand how to use it
=========
i also tried to click start windows normally but it won't work

If the problem is installed software, start notebook in safe mode and try to start system restore from there.
Please let me know which options are available. Can you roll back OS few days back?
Are some restore points listed there?

Mozalloc.dll A firefox plug in container has stopped working. I can't get firefox to work for more than 2 mins. before crashing. How do I make this stop?

AdapterDeviceID: 0x9712
AdapterDriverVersion: 8.861.1.2000
AdapterSubsysID: 164c103c
AdapterVendorID: 0x1002
Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
AvailablePageFile: 13967405056
AvailablePhysicalMemory: 6222434304
AvailableVirtualMemory: 3783245824
BIOS_Manufacturer: Hewlett-Packard
BlockedDllList:
BreakpadReserveAddress: 46661632
BreakpadReserveSize: 41943040
BuildID: 20141113143407
CrashTime: 1417153956
EMCheckCompatibility: true
EventLoopNestingLevel: 1
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1416895140
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 175
StartupTime: 1417153798
SystemMemoryUsePercentage: 25
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 16630353920
TotalPhysicalMemory: 8316153856
TotalVirtualMemory: 4294836224
URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
Vendor: Mozilla
Version: 33.1.1
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 :
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP TCP Service Provider : 2 : 1 :
RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 2 : 2 :
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.
AND:
A plugin container for firefox has stopped working.
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 33.1.1.5430
Application Timestamp: 54656826
Fault Module Name: mozalloc.dll
Fault Module Version: 33.1.1.5430
Fault Module Timestamp: 54654321
Exception Code: 80000003
Exception Offset: 00001425
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7. Message shows that iTunes has stopped working. This happens every time. I have updated iTunes Software. Will not solve the problem. What is wrong

I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
          iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
          "Check online for a solution and close the program"
          "Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
     Here are some of the Problem Details:
     "Problem signature: APPCRASH
     Application Name:     iTunes.exe
     Application Version: 11.0.1.12
     Application Timestamp: 50c8fc7e"

I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony

Can't get itunes. I get the following message when I click on either the shortcut or the program. It says ITunes has stopped working and I can either check on line for a solution and close the program or just close the program.

When I click on the itunes shortcut or the program I get the following message:
ITunes has stopped working. My two options are: Windows can check on line for a solution to the problem or close the program.
It seems that my entire library is not there. If I sync my ipod will it add it back into my library on the computer?
I've even tried installing again and nothing works. Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
Thanks

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Westell 2100 Stopped Working

Similar Messages

Maybe you are looking for