Westell 2200 Modem, should I upgrade?

To all who can see this, I am running a Westell 2200 Modem with a Linksys Wireless-G BEFW11S4 Router. Lately, probably within the past 6 months, we've been experiencing a multitude of Lost Connections. The way it happens makes it seem like it's bottlenecking....everything is going so well, then it starts to plummet and within a few seconds, Download and Uploads show a 0 transfer and I have to go reset the Modem and Router. This can happen as frequently as 8 times in just one afternoon, or as rare as once a week. I cannot figure out why though, it's not like I'm online maxing out my bandwidth, it just stops.
I was told that our Transfer Rate was upped from 1.5 Mbps to 3 Mbps, yet I cannot get downloads of higher than about 286 Kbps and Uploads of 127 Kbps. The Router was a replacement for an identical one that died about a year ago, but the Modem I've had since I started the DSL Service within the last 4 or 5 years.
My question is, should I get a new Modem and if so, what are some recommendations? I know the Router is fine because all my Pc's still read a Network connection, they just can't get online. I would also like to know if there is a way to get Verizon to confirm what my actual Transfer Rate / Allowance is, because I can't get anyone on the phone to assist me with that question.
I attempted to Post this in the Stickied Thread up top but it won't let me for some reason, so I'm making a new Post. Sorry.

tazhyngarth, I just replaced my westell 2200 with a GEU003AD3 from buy.com. I paid for it, verizon would not send me a replacement modem (although I did not try that hard...). This fixed my drop outs and slow transfer speeds. Although, your problem seems a little different than mine. The drop outs were sudden, and the reduced speeds were more consistent. Let us know if you get a free one and what the policy is. good luck..

Similar Messages

In need Of help with a Westell 2200 Modem and a new Router

Okay, here's the situation:
I am trying to hook up a Linksys wireless Router.
When I try to access the Modem to activate "bridge mode," I am unable to. Apparently back 3-4 years ago, my mother thought it would be a good, safe idea to change the username and password of the router. It's real safe considering she forgot what she changed it to.
My question is:
Is there any way/chance I can get into the modem some other way?
Thanks to anyone who can help in any way!

#1 When you tried to log-in to the router:
a) Did you get a log-in screen?
b) Did you try physically by wire connecting your computer to the router?
#2 Did you try the reset method?
With most network equipment, the reset method is..
Press and hold the reset button/switch while turning off and back on the power to the router.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

!! URGENT !!! Westell 2200 and ALLVOI VOIP

Hello:
I recently signed up with ALLVOI after voicewing terminated services. I have a westell 2200 modem which is directly connected to the ALLVOI adapter. This adapter is connected to a linksys WRT54G. I am fine as far as outgoing calls are concerned. But incoming calls are not coming through. On the 3rd or the 4th try the phone would ring!! On contacting ALLVOI, they had me change the Static NAT setting on the modem. I added the IP address of the ALLVOI adapter as a Static NAT (so that the firewall will not block this IP). This worked fine for a day and now I am back to square one. Again on contacting ALLVOI they said that the modem is not holding on to the STATIC NAT value!! If I see my router settings, I do see the adapter listed as a device on the LAN.
Not sure what the issue is.. Any help would be greatly appreciated
Thanks

I have an idea.
#1 Put the modem into bridge mode.
All DSLR (dslreports.com) FAQs » Verizon Online DSL FAQ » 4. Hardware » How do I use a router with the Westell 2200?
http://www.dslreports.com/faq/9265
#2 And as need be reconfigure this ALLVOI to handle the public IP.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Verizon Turbo Dsl plan with Westell 6100 modem? Help?

So I have a westell 6100 modem and on the 7th I upgraded my bundle i had 1 Mbps for Internet , verizon homephone freedom essentials, and Directv. Since fios is not available were I live. And my new bundle is Verizon Dsl 7.0-1 Mbps turbo plan, verizon essentials and directv for $115.00. My question is will my modem provison the speed correct? will it still work? Or do I have to buy a new modem? Thanks!.
Solved!
Go to Solution.

If you have been using the 6100 previously then the modem should sync to the new speed automatically. If yareou still using an old style flat phone cable from the jack to the modem it may not be capable of the faster speed. The round tan colored cable which originally was supplied with the modem would be the one to use. I moved up recently from 3 to the turbo 7.1 via ASDL2plus and found that Verizon at my location has capped the speed at about 5.5. Their out is to say speeds up to 7.1.

I have a verizon mifi 2200 modem and wonder if an ipad with retina display will connect to it

I have a verizon mifi 2200 modem and wonder if an ipad with retina display will connect with it to use the internet

It should work. Have you tried and it doesn't work?
FYI
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have a Westell 6100G modem. I want to set up Airport Express for wireless. Can someone tell me how to do it step by step. I'm using an HP with Windows Vista. I'm a tech idiot.

Just got Airport Express to save on GBs of data. I have already a Westell 6100G which is for use as Internet Broadband, via Verizon. How do I set up the Airport Express with this Westell. Do I even still need the Westell, or do I need to also buy a wireless router? I'm a tech idiot and this is driving me nuts.

The Westell 6100G is a combination modem and router or gateway device. The AirPort Express is a wireless router.
Since the Express does not have a built-in modem, you will still need your Westell gateway in order to access the Internet.
Which exact model of AirPort Express do you have. It will be written (in very hard to read type on a label on one of the AirPort's sides). It should look something like: A1392. It may also state a Order#. In that case it would look something like: MC414LL/A
Regardless of which model you have, the basic network configuration would be that you would connect an Ethernet cable between the Westell's Ethernet port and the WAN (circle of dots) port on the Express. (Note: If you have an earlier model of the Express, you would connect the cable to the only Ethernet port on the Express.)
The good news is that you will not have to make any configuration changes to the Westell. We should be able to use it as configured.
What we are going to start with is getting a basic Wi-Fi network that should provide your computer with wireless access to the Internet. Once verified as working, we can fine-tune this network to include wireless security and any other goals that you may have.
Ready to start?
I would recommend that you do the following as a minimum:
Power-down the Westell and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the AirPort Express base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
Once the reset has completed, remove the AirPort Express from power.
Connect an Ethernet cable between the Westell and the AirPort Express.
Power-up the Westell; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Switch from Westell 2200 to Westell 6100

I am beyond frustrated. I was using the westell 2200 until it stopped working and was sent a westell 6100. I cannot connect with the 6100 to my dell desktop because it does not have a ethernet drive. I was using the usb connection without any problems. Called tech support and nothing is resolved.
Is there a way for the westell 6100 to connect using the usb connection? I was told to plug the ethernet cord to the modem and the usb to the computer, still no connection. I would like to have my internet again.
Someone please help me. Thanks.

Ok.
Cancel that.
Go to http://www.westell.com/index.php?option=com_content&task=view&id=191&arcsection=support
And get the driver.
Please install the driver.
If you do not know how to, also get the Documentation.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Verizon DSL, Westell 6100 modem/router, and Airport Extreme

Useful info so you won't have to go through what I did.
Verizon ISP using the Westell 6100 modem/router & Airport Extreme.
The Westell 6100 was configured during installation as a modem and router with a direct connection to the Mac. You can actually connect Airport Extreme at this point with an ethernet connection to the Westell and it will work, but you can't do any of the sharing things (remote login, personal web sharing, etc.) To do those things the Westell needs to be in the Bridge mode. In a nutshell, you have to edit the Westell's VC configuration to establish Bridge mode, and disable its DHCP server. Then you have to set up the Airport to connect using PPPoE using the Account Name and Password from Verizon.
1. With the Westell connected directly to the Mac, access the device at 192.168.1.1.
a. Under VC Configuration the first of seven configurations should already be enabled as VPI 0, VCI 35 using PPPoE. Edit that one and change it to Bridge mode.
b. Under DHCP configuration, disable the DHCP server. You can also do this under the Private LAN Configuration page. If at the latter, do not attempt to disable the Private LAN (it won't let you anyway). Verizon tech support kept insisting I had to disable the Private LAN, which caused a great amount of anguish!
c. Before leaving 192.168.1.1 (you won't be able to access it again once the Airport is connected and configured) make sure you know your ISP account name and password. This was assigned during my setup procedure with Verizon, a random selection of letters and numbers.
2. Now hook up the Airport WAN to the Westell's ethernet port and the Mac to the Airport LAN. Fire up Airport Admin Utility.
a. Under the Internet tab, select Connect Using PPPoE.
b. Configure PPPoE using the Verizon Account Name.
c. Change password to the Verizon account password.
3. Restart and that's it.

Thank you for your post. When I moved to another home, Verizon sent me the Westell 6100 and I had been having trouble staying connected to the Internet with my Airport. Last night, I loss wireless access and the Airport status in the menu bar read "Looking for a PPPoE connection". Verizon customer support was able to get me back online, albeit with only a direct Ethernet connection between my iBook and the 6100.
I found your post and followed your instructions. Now all the iBooks in our household are back online via the Airport. Thank you very much!
iBook G4 933Mhz Mac OS X (10.4.7)

I am FRUSTRATED! My goal is to create a wireless network using an iMac, a Westell 2100 modem (and router)

I started with a PC, the Westell 2100 modem (also a router) and the Linksys WRT54G. I set it up according to instructions I found on the Internet, and it worked fine for YEARS!!! Then, I switched to an iMac. After problems with the setup, I found help on the Internet, and got it working. It has been a long time since then, and I have had to disconnect things, and I do not remember how to set it up. I have searched the Internet, but cannot find a solution. I have searched the community, and followed some instructions here, but I have had no success. I know the following:
The Westell 2100 works as it should. I can connect directly to my computer and access the Internet.
The Linksys WRT54G has not been damaged.
At one point, I had set the SSID and had a WEP/WAP key that is HIDEOUSLY long. Here are some more tidbits: WPAPSK TKIP.
Please help! My new iPhone 4S(teve) needs it's wireless connection to Wi-Fi .

Pleeeze help???

Westell 6110f modem & Netgear N900 R4500 router

Hi!
I have a Westell 6110F modem and Belkin F5d9230 router that works fine. I want to replace the router with a Netgear N900 R4500 router. I set it up like the Belkin, but it won't talk to Verizon. Right now I have the new router plugged into the old router and have Internet access on the new router. I'd prefer to have just one (I need to stream some music to a couple of places and the Belkin doesn't handle it). Can anyone help?
Extech

#1 With the Belkin router connected to the Westell and it is online, go to the LAN IP of the Belkin router.
#2 In there, the WAN IP Address of the router should be the same IPv4 Address that you see at http://www.pcwintech.com/myip
#3 If it is not, then your modem combo is not in bridge-bridge mode (configured to handle the public IP)
#4 As how to put the modem combo into bridge-bridge mode, see
http://www.dslreports.com/faq/13600
#5 If you have any questions as how to do that, please post.
#6 If the WAN IP Address is the same at step 2:
a) in the Belkin router go to Connection Type under WAN.
b) In the connection type is DHCP...
#1 In the Belkin router go to back to the main page of the Belkin router.
For example if you are at http://192.168.2.1/wan.html, go to http://192.168.2.1
#2 Record down the WAN MAC Address.
#3 In the Netgear router, you will need to spoof/clone that Address.
I believe the feature exist in the Netgear at Advanced -> Setup -> WAN Setup
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Replacing Westell 6100 modem with Netgear Genie

Good day. I'm replacing Westell 6100 modem with a Netgear Genie. I need the following data to complete hookup. Thanks.
Netgear Broadband ADSL2+ Modem (DMP111SP)
IP Address
Subset Mask
Default gateway
Preferred DNS Server
Alternative DNS Server

Since you're plugged into the Westell, use http://192.168.1.1/ to log into the modem. From there, see if your modem shows something along the lines of "Routed Bridge" mode or if it shows "PPPoE" as the connection type. If PPPoE, follow the post I mentioned above. The same goes with Routed Bridge mode. Worst case scenario, call Verizon and have them ensure your Westell is configured correctly if you cannot get online with the Westell, and from there we'll see how the Netgear needs to be configured.
Also, what may have happened here is your Netgear's IP address could have changed. You will want to open up a Command Prompt Window (Start > search for the program "cmd.exe" or go to Start > Run > enter in cmd.exe) and run the command ipconfig. Default Gateway should give the IP of the router you're attached to in a home network.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Verizon Westell Versalink Modem?

I am buying a new imac intel duo core 2 20 inch. Can i just plug into my Verizon Westell Versalink Modem and go? Will it automaticley detect my connection? Thanks

Verizon's DSL is a mixed bag. Sometimes the software which comes with it works great. Sometimes you have to get on the phone with them and wait up to two hours to get ahold of a Mac technician as they don't leave a certain setting on right in the modem. You should at least find out from Verizon if you have a PPPoE connection and what are the default username and password in case the software that comes with it does not install properly, as well as the Domain Nameserver and Nameserver addresses. Then you can put those settings yourself in Apple menu -> System Preferences -> Network.

Time Capsule: Port Forwarding Issue and DHCP with Westell 6100g Modem

Ok two issues as of right now, but more down the road i think... Anyways, number one, i would like to be able to backup my computer using time machine and my time capsule.. Right now it works properly when inside the local network, was wondering if there was a way to backup when outside the network... i travel a lot and always have my macbook pro with me.. Also, i have a USB hard drive connected to the usb port on back of time capsule but its not showing up anywhere... is that only for printers??? that's not such a big deal, but would be nice to have access to that hard drive from multiple computers... OK so part two of my issues is, i have a WESTELL 6100g modem for DSL verizon service, which is crappy, but that's besides the point, it is a modem/router, so i have the time capsule connected directly to that westell.. the westell only has one Ethernet port, so that's wired to time capsule and then my computers are connected wirelessly and wired through the capsule. It seems that the westell is distributing the IP's and is controlling the port forwarding and what not.. I have tried a few things to give control to the time capsule but that didnt work.. i followed these directions on the web page http://www.dslreports.com/faq/vz/4._Hardware#13600 but it didnt work properly, i couldn't log onto the web at all.. Maybe im doing something wrong.... Anyways, what i really want to do is control everything that the westell is controlling right now with the time capsule... i want to give out IP's and also control port forwarding with the capsule.. Any way of getting that accomplished would be AWESOME... I'm somewhat intelligent when it comes to computers so i should understand everything you are talking about... please help!!!

wattabing wrote:
Ok two issues as of right now, but more down the road i think... Anyways, number one, i would like to be able to backup my computer using time machine and my time capsule.. Right now it works properly when inside the local network, was wondering if there was a way to backup when outside the network... i travel a lot and always have my macbook pro with me.
If you have Back to my Mac (available online service from Apple's MobileMe), then you can perform the following actions with your Time Capsule remotely,
1. Remote disk access to both the Time Capsule disk and a compatible disk connected via the Time Capsule's USB ports.
2. Remote configuration.
Also, i have a USB hard drive connected to the usb port on back of time capsule but its not showing up anywhere... is that only for printers???
Printer, hub, or compatible disk.
http://support.apple.com/kb/HT2421
Anyway, it could be a setup issue for you, assuming you have Back to my Mac (MobileMe) then the procedure for Time Capsule services is shown in the following Apple support kb
http://support.apple.com/kb/HT3486
and for USB disk please see the following Apple support kb
http://support.apple.com/kb/ht2426

I regularly have 15 MB of Available Memory - Should I upgrade or is there an issue I should solve first? EtreCheck report pasted below

Hello,
My MacBook is running super slow. I downloaded Memory Clean from the App Store and I regularly have 15MB or free memory available.
In Activity Monitor I usually see the following:
~800 MB kernel_task
~500 MB softwareupdated
~500 MB Image Capture Extension
In Console, I see mdworker.bundle errors attributed to UID's: 501, 503, 1422
My current UID from what I can tell is 502. Other UID's left over from various upgrades are 89, 99, 235.
Lastly, Drive Genius is giving me a Drive Integrity Warning. But I can't create a bootable clone.
I have no idea if the above problems are related. I'd like to think I just run a lot of stuff that eats my memory and upgrading the RAM would be the easy path. What say you all?
-Jeff
Problem description:
I regularly have 15 MB of Available Memory - Should I upgrade or is there an issue I should solve first?
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 1:42:38 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (17-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,3
    1 2.5 GHz Intel Core i7 CPU: 4-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 412
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1920 x 1200
    AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 11 days 16:29:20
Disk Information: ℹ️
    APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 748.93 GB (73.11 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 749.30 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Boom.app
    [not loaded]    com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) [Click for support]
        /Applications/DiskWarrior.app
    [not loaded]    com.alsoft.Preview (4.4) [Click for support]
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hidhook (9.0 24237.1028877) [Click for support]
    [not loaded]    com.parallels.kext.hypervisor (9.0 24237.1028877) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (9.0 24237.1028877) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (9.0 24237.1028877) [Click for support]
    [not loaded]    com.parallels.kext.vnic (9.0 24237.1028877) [Click for support]
        /Applications/VMware Fusion.app
    [not loaded]    com.vmware.kext.vmci (90.5.7) [Click for support]
    [not loaded]    com.vmware.kext.vmioplug.12.1.17 (12.1.17) [Click for support]
    [not loaded]    com.vmware.kext.vmnet (0188.79.83) [Click for support]
    [not loaded]    com.vmware.kext.vmx86 (0188.79.83) [Click for support]
    [not loaded]    com.vmware.kext.vsockets (90.5.7) [Click for support]
Startup Items: ℹ️
    HP IO: Path: /Library/StartupItems/HP IO
    Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.xpc.loginitemregisterd.plist
    4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.GSSCred.plist
    [killed]    com.apple.ifdreader.plist
    [failed]    com.apple.loginwindow.LFVTracer.plist
    [killed]    com.apple.nesessionmanager.plist
    [killed]    com.apple.periodic-monthly.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.xpc.smd.plist
    8 processes killed due to memory pressure
Launch Agents: ℹ️
    [running]    com.bjango.istatmenusagent.plist [Click for support]
    [running]    com.bjango.istatmenusnotifications.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.[redacted].UpdatePodcastsAgent.plist [Click for support]
    [unknown]    ~ [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.backblaze.bzserv.plist [Click for support]
    [running]    com.bjango.istatmenusdaemon.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
    [loaded]    com.prosofteng.DriveGenius.locum.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.akamai.client.plist [Click for support]
    [running]    com.akamai.single-user-client.plist [Click for support]
    [running]    com.backblaze.bzbmenu.plist [Click for support]
    [loaded]    com.divx.agent.postinstall.plist [Click for support]
    [running]    com.ecamm.printopia.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
    [running]    com.prosofteng.DGMonitor.plist [Click for support]
    [running]    ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
    Dropbox    Application Hidden (/Applications/Dropbox.app)
    Fantastical    Application Hidden (/Applications/Fantastical.app)
    TextExpander    Application Hidden (/Applications/TextExpander.app)
    HazelHelper    Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 3.3.1.3   - SDK 10.8 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    npP3Remote: Version: 0.3 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivXBrowserPlugin: Version: 2.2 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
    BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
    CitrixOnlineWebDeploymentPlugin: Version: 1.0 [Click for support]
    WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Safari Extensions: ℹ️
    1Password
    FastestTube
    DivX Plus Web Player HTML5 <video>
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    Akamai NetSession Preferences [Click for support]
    Backblaze Backup [Click for support]
    BrowserPlus [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Hazel [Click for support]
    Logitech Control Center [Click for support]
    MacFUSE [Click for support]
    Printopia [Click for support]
    Xmarks for Safari [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 748.93 GB Disk used: 675.81 GB
    Destinations:
        Time Machine [Local]
        Total size: 999.85 GB
        Total number of backups: 49
        Oldest backup: 2014-10-30 20:23:53 +0000
        Last backup: 2015-02-26 13:07:38 +0000
        Size of backup disk: Too small
            Backup size 999.85 GB < (Disk used 675.81 GB X 3)
Top Processes by CPU: ℹ️
        12%    WindowServer
         7%    bzfilelist
         1%    loginwindow
         1%    Dropbox
         0%    bztransmit
Top Processes by Memory: ℹ️
    361 MB    bztransmit
    326 MB    Finder
    206 MB    Safari
    163 MB    WindowServer
    146 MB    Console
Virtual Memory Information: ℹ️
    647 MB    Free RAM
    2.99 GB    Active RAM
    2.45 GB    Inactive RAM
    1.67 GB    Wired RAM
    10.17 TB    Page-ins
    6.32 GB    Page-outs
Diagnostics Information: ℹ️
    Feb 27, 2015, 09:46:13 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/helpd_2015-02-27-094613_[redac ted].crash

Ok.
I think that got it all. Anything else you see?
Problem description:
Uninstalled CleanMyMac2
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 3:31:40 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (17-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,3
    1 2.5 GHz Intel Core i7 CPU: 4-core
    8 GB RAM Upgradeable
        BANK 0/DIMM0
            4 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 412
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1920 x 1200
    AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ℹ️
    OS X 10.10.2 (14C109) - Time since boot: 0:51:42
Disk Information: ℹ️
    APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 748.93 GB (76.14 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 749.30 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Boom.app
    [not loaded]    com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) [Click for support]
        /Applications/DiskWarrior.app
    [not loaded]    com.alsoft.Preview (4.4) [Click for support]
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hidhook (9.0 24237.1028877) [Click for support]
    [not loaded]    com.parallels.kext.hypervisor (9.0 24237.1028877) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (9.0 24237.1028877) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (9.0 24237.1028877) [Click for support]
    [not loaded]    com.parallels.kext.vnic (9.0 24237.1028877) [Click for support]
        /Applications/VMware Fusion.app
    [not loaded]    com.vmware.kext.vmci (90.5.7) [Click for support]
    [not loaded]    com.vmware.kext.vmioplug.12.1.17 (12.1.17) [Click for support]
    [not loaded]    com.vmware.kext.vmnet (0188.79.83) [Click for support]
    [not loaded]    com.vmware.kext.vmx86 (0188.79.83) [Click for support]
    [not loaded]    com.vmware.kext.vsockets (90.5.7) [Click for support]
Startup Items: ℹ️
    HP IO: Path: /Library/StartupItems/HP IO
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [running]    com.bjango.istatmenusagent.plist [Click for support]
    [running]    com.bjango.istatmenusnotifications.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.[redacted].UpdatePodcastsAgent.plist [Click for support]
    [unknown]    ~ [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.backblaze.bzserv.plist [Click for support]
    [running]    com.bjango.istatmenusdaemon.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.prosofteng.DriveGenius.locum.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.akamai.client.plist [Click for support]
    [running]    com.akamai.single-user-client.plist [Click for support]
    [running]    com.backblaze.bzbmenu.plist [Click for support]
    [loaded]    com.divx.agent.postinstall.plist [Click for support]
    [running]    com.ecamm.printopia.plist [Click for support]
    [running]    ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
    Dropbox    Application Hidden (/Applications/Dropbox.app)
    Fantastical    Application Hidden (/Applications/Fantastical.app)
    TextExpander    Application Hidden (/Applications/TextExpander.app)
    HazelHelper    Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 3.3.1.3   - SDK 10.8 [Click for support]
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
    npP3Remote: Version: 0.3 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivXBrowserPlugin: Version: 2.2 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0
    googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
    BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
    CitrixOnlineWebDeploymentPlugin: Version: 1.0 [Click for support]
    WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Safari Extensions: ℹ️
    1Password
    FastestTube
    DivX Plus Web Player HTML5 <video>
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    Akamai NetSession Preferences [Click for support]
    Backblaze Backup [Click for support]
    BrowserPlus [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    Hazel [Click for support]
    Logitech Control Center [Click for support]
    MacFUSE [Click for support]
    Printopia [Click for support]
    Xmarks for Safari [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 748.93 GB Disk used: 672.78 GB
    Destinations:
        Time Machine [Local]
        Total size: 999.85 GB
        Total number of backups: 49
        Oldest backup: 2014-10-30 20:23:53 +0000
        Last backup: 2015-02-26 13:07:38 +0000
        Size of backup disk: Too small
            Backup size 999.85 GB < (Disk used 672.78 GB X 3)
Top Processes by CPU: ℹ️
        32%    Finder
        25%    Console
        14%    WindowServer
         4%    NotificationCenter
         3%    hazelworker
Top Processes by Memory: ℹ️
    395 MB    bztransmit
    186 MB    Finder
    146 MB    Console
    146 MB    WindowServer
    129 MB    mds_stores
Virtual Memory Information: ℹ️
    1.51 GB    Free RAM
    4.26 GB    Active RAM
    1.38 GB    Inactive RAM
    1.44 GB    Wired RAM
    21.08 GB    Page-ins
    3 MB    Page-outs
Diagnostics Information: ℹ️
    Feb 27, 2015, 02:36:10 PM    Self test - passed
    Feb 27, 2015, 02:13:40 PM    /Library/Logs/DiagnosticReports/Memory Clean_2015-02-27-141340_[redacted].cpu_resource.diag [Click for details]
    Feb 27, 2015, 01:49:15 PM    /Library/Logs/DiagnosticReports/WindowServer_2015-02-27-134915_[redacted].cpu_r esource.diag [Click for details]
    Feb 27, 2015, 09:46:13 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/helpd_2015-02-27-094613_[redac ted].crash

Frustrated trying to set up a wireless network with Bellsouth Fastaccess's Westell Wirespeed modem.

Today, about 6 hours ago in fact, I came home with a Linksys WRT54G wireless router. It took me a while to get a grasp on how to connect it. I had no network port on the back of my PC, as far as I knew, and I had been connecting my Westell Wirespeed modem to my PC via USB for years. In the end I ended up spending an hour digging up the old Ethernet cable that came with the modem, and finally managed to do everything the Router setup program asked of me.
One hour after restarting multiple times, experimenting with different orders of plugging in things, and countless resettings of the Router AND the modem, it finally set up the network. It ran for an hour.
One of my cats ran behind my computer, jarring one of the cords and causing the PC to turn off. It happens twice or thrice a year when they get rowdy. When I jiggle all the plugs back into place and turn on my computer, the connection was dead! Gone! And there was nothing in my Program Files that said "Start Linksys Network" or anything convenient like that. I suppose that would be too easy, right? And my internet didn't work either! So with no other choice, I opened up the installation program again - there was no trace of any sort of folder or application on my PC linked to the router. In fact, as far as I can see, I still have no way to get into ANY sort of router-related application aside from the install CD.
So I stuck that back in there.
I've spent the last three hours grueling over this thing. I connect it all before turning the PC on. Nothing. I disconnect everything and plug it all back in meticulously step by step according to the program. Nothing. The install program always gets through the PC checking, and lets me fill in the PPOE (or whatever) information. As it tries to update the router configuration, though, it tells me one of two things.
1 ) If I have just done a reset of the router, it gets to 99% in the router configuration progress bar before telling me the 'router configuration failed'.
2 ) If I exit the setup program and reopen it, I get a generic "So and so has caused an error in 4746545x48345675 (or some other random number)," and asks me to either Cancel or Debug.
My hands are sore and I'm stressed to the limits. I bought a laptop a week ago for the sole purpose of alleviating the battles my kids have over the only source of internet in the house, but it's just been sitting there. I'm really at the end of my wits. Between the errors that don't tell you what went wrong and the perfectly-connected router that keeps pretending it's not connected, I'm just about ready to return the laptop.

This happened to me when I was setting up the wireless router for a friend. The issue is with the Westall modem. You need to go in and setup the "bridge" option on the westell modem. The link below gives directions or you can call bellsouth dsl support (this is how I learned about it).
http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=3f993409%2Ddff7%2D422...
Good luck
Solution:
Method 1 - Hard Reset
Restore the modem to default settings by pressing the Reset button on the back of the modem and holding it for 3 seconds. (Bridged mode is the default setting for the Westell).
After the modem regains sync, it is in Bridged mode. Do not attempt to surf into the modem as surfing into the modem will enable the Easy Login page and convert the modem from bridged mode to a PPP mode.
Method 2 – Bridged Mode
Access the Westell interface using http://192.168.1.254 or http://launchmodem.
Click on the Broadband DSL Line button.
Click on the Protocols button
Select the radio button to the left of Option 2 (Bridge)
Click the save button. Once the modem has restarted it is in bridge mode.
ALL STEPS COMPLETE

Westell 2200 Modem, should I upgrade?

Similar Messages

Maybe you are looking for