Westell 2200 support for two computers?

I have a Westell Dual Connect DSL Router (A90-220015-04). Does it support two computers, if one is connected via Ethernet and the other via USB? I've search this forum, Verizon's entire website and google, without finding any definitive answer on this.
Also, if it is supported, how do I go about this?
With one computer, I am able to connect via Ethernet, but not USB. For the latter, I first disconnect the Ethernet connection, power off the Westell router, connect the USB wire (from PC to Westell router) and power on the Westell router. The power and DSL lights turn steady green, but the USB light remains dark. Is a driver required for a USB connection?
thanks,
-bob

tsreyb wrote:
I have a Westell Dual Connect DSL Router (A90-220015-04). Does it support two computers, if one is connected via Ethernet and the other via USB? I've search this forum, Verizon's entire website and google, without finding any definitive answer on this.
Also, if it is supported, how do I go about this?
With one computer, I am able to connect via Ethernet, but not USB. For the latter, I first disconnect the Ethernet connection, power off the Westell router, connect the USB wire (from PC to Westell router) and power on the Westell router. The power and DSL lights turn steady green, but the USB light remains dark. Is a driver required for a USB connection?
thanks,
-bob
It should be one or the other. You can not use both Ethernet and USB. If you have one, try an Ethernet switch connected to the modem. If I recall it will issue more than one address. But your best bet would be to go get a wireless router so you would have wireless capability, and multiple ports.

Similar Messages

  • I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff . I received an email stating that Adobe could not release the payment and that

    I bought a team license for two computers, the purchase was recorded on the credit card and the amount recorded in the making, but was unable to validate the association staff .
    I received an email stating that Adobe could not release the payment and that I should validate the method of payment , tried to insert another card number but the system does not accept the security VAT reporting error message. How do I validate my license with association staff and confirm the payment card?

    Hi Daniel,
    For any sort of payment related matter, kindly contact our support team via:  http://helpx.adobe.com/in/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
    If you are unable to use chat option kindly try below mentioned steps.
    Try different browser.
    Delete cookies and cache
    If you are still not able to chat, Kindly reply with the below mentioned information.
    OS version:
    Browser Version:
    You can also try: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html 
    Thanks,
    Atul Saini

  • Hi all - is it really possible to use one license for two computers or is it just a rumor?

    I heard that it would be possible that you can use one license for two computers. Is that the truth? And if so - how does it work?
    Thanks
    K

    Adobe CC or any perpetual previous version allows you to install & activate it two times (on the same computer or other different one).
    As per End user license agreement, only one computer can be used at one given time.
    Please refer to:
    Licenses and terms of use | Adobe
    Adobe - Adobe product license agreements
    Hope it helps you.
    Regards
    Rajshree

  • NO internet in the network except for two computers after installing ASA 5505

    Hi Guys,,,
    I dont know if any of you guys had a problem like this... I installed a CISCO ASA5505 with 50 user license  to my network as the gateway firewall. So ASA is acting as the gaeway router which is connected to a fibre circuit and also it gives DHCP to the network. The strange thing is that except for two computers rest does not have internet. I also have an asterisk phone system which works fine..
    I tried everything.... static IP's DHCP, DNS nothing worked. But strange enough two computers works fine and have internet.. but are no special computers. One is Win XP and the other one is Win7. When I troubleshoot the problem in win 7 on one of the computers it says
    "The remote device or resource won't accept the connection"
    I have no idea now... any help would be great...
    Thanks in advance

    Hello Amal.
    I hope the gateway of the comupters are configured as ASA.. Are you able to ping your gateway from the PC where you dont have access to internet and also check whether the translation is happening on ASA when you are trying to access the internet ( show xlate  | i 'local ip'
    It would be great if you could share the ASA config as well
    regards
    Harish.

  • I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me.  How do I set it up to access it from my second iMac?

    I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me.  How do I set it up to access it from my second iMac?

    I just had an afterthought, Peter, if I could bother you further; if the downstairs iMac that I want to access it from is in my wife's name and not mine (even though I'll be the one using it on her computer) does that affect anything or can I simply load the software straight into her computer without any complications?

  • I purchased Creative Cloud for two computers.  OK on first one.  The second one

    I purchased Creative Cloud for two computers.  OK on first one.  The second one
    asks for a serial number?...All I have is an order Number:  C0128012167.
    How can you help me?  Please!  Right now I have half of what I purchased!!!

    Hi JrBieb33,
    Please follow the steps suggested in the below link and that should help you.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Thanks
    Manish

  • PSE 10 one program for two computers

    Hello; my question is, it possible to use my PSE 10 that is installed on my PC and use it on my laptop via a home network ? downloading the program onto my PC is not an option. I once had it installed I had to replace my drive thus using the two allowed installs by adobe. I contacted adobe about another licence, they were not much help, they only wanted to sell me another program. thanks for any info on this matter. Paolo

    You can certainly install PSE on two computers. If you have used both your activations and you no longer have one of the computers to deactivate it so you can reinstall on a new one, you will need to contact activation support:
    http://www.adobe.com/products/activation/
    You can often start a chat session right in that window and get things resolved right away.

  • Macbook Pro Retina (late 2013) and support for two external monitor

    Hi,
    I have a Macbook Pro Retina 13" (Late 2013) and are looking to buy two DELL U2414 monitors. But after searching the web i´m a little bit confused if my MBPr will actually supports connecting two montors from one single Display port.
    I will be using this montors at work where I use my MBPr with Windows7 (Paralllels).
    I want to set up these two monitors with extended desktop not mirroring. The reason of using just one DP on my MBPr is that the other one is used by my wired ethernet connection. Will this work under OSX10.9.2 or 10.9.3?. Does my MBPr 13" support DP1.2a MST that is needed for daisy chain multiple monitors?

    The hardware supports DP1.2 and MST but unfortunately at present OS X Mavericks does not.

  • Two cloud accounts for two computers.

    I am currently using two cloud accounts with CS6 on my two computers. How do I consolidate two accounts into one?

    Contact support directly by phone or web chat.
    Mylenium

  • External hard drive for two computers

    I have two computers linked with Airport Express and am converting to Leopard. Can I back up both computers via Time Machine with one hard drive?

    The Macbook Pro that is connected to the firewire drive saves its backup in a "Backups.backupdb" folder. The machines that connect over the network save their backups as sparse bundles that are mounted by the machines. I have never had a problem with two machines backing up at the same time. The caveat would be that the two networked machines do not have large changes, and so their backups are usually small.
    I have restored from the backups to test the setup, and everything works fine... There is a lot of useful information on the forums about making this work, and steps to make it less painful for the initial backup.
    Steve

  • One Time Machine drive for two computers

    Okay I know that I can use one drive for my macbook pro and my iMac. But, I am wanting to keep both my computer connected to the drive, without having to disconnect one and then hooking up to the other. Is there a way for both computer to recognize the drive and pull from it for backups. Can a usb switch solve this problem or is there software that will work. Also if there is a way to do this I know that i will have to off set the backup time so that both computers are not writing to it at the same time. Thanks in advance,
    Adam

    you can't have a drive directly plugged in into two computers at once. what you can do is keep it plugged into one computer, back up that computer directly and back up the other computer over network (wireless or ethernet). you don't need to worry about overlapping backup times. the OS will take care of it itself.

  • Lightroom for two computers

    Hi there,
    I have lightroom on my macbook, and now bought an imac. I'd love to install lightroom on there as well. I read that it's possible to install lightroom on two computers/laptops.. but how do I go about it? I downloaded the test version, and tried to enter the license key I used for my macbook version, but this doesn't work...
    Thanks a lot for your help
    Cheers

    Du fragst im deutschen Forum, deshalb kriegst Du die Antwort auf deutsch.
    Du kannst eine vorhandene Lizenz auf zwei Geräten gleichzeitig nutzen, aber nur einmal zur gleichen Zeit ausführen.
    Du musst das zweite Gerät mit der selben Lizenz bestücken, wie das erste Gerät. Deshalb ist es das beste, den selben Installer zu verwenden und dann bei Geräte auf den letzten Stand updaten.
    Da es unterschiedliche Lizenzmodelle für Lightroom gibt, und Du nicht geschrieben hast welches, können wir Dir nur beschränkt helfen. Wenn Du ein Einzellizenzmodell hast, dann musst Du diesen Installer nehmen, hast Du die Cloud, musst Du Dich bei der Cloud anmelden und darüber installieren, hast Du die Box, musst Du die gelieferte CD verwenden und darüber installieren.
    Wichtig ist auch, dass die beiden Installationen die selbe Version haben müssen, damit die SN funkt.

  • Does Ipad 2 support for two sets of headphones at once?

    Does I pad 2 support using two sets of headphones at once? what accessories do I need to do this please

    Rudegar wrote:
    It 1/2 the volume
    In power, yes, but I don't know the effect on the human ear.  Something is gnawing in the back of my mind that suggests that the human ear can compensate for a portion of the lost volume.

  • Macbook Pro support for two external displays

    I keep seeing articles since yesterday stating that the new MBP retina display supports 3 external monitors and the new Macbook Air supports two (through just one ThB port?) but how come no one says anything about the new regular MBP's support? If the Air supports two isn't the regular MBP also supposed to be able to work with two external monitors?

    USB video has performance limitations, but it's fine for stuff that doesn't involve fast-action video.
    ah yes, sorry, the new USB 3 now supports speeds up to 5 GB/sec so it may become suitable for AV use. Actually, only ThunderBolt (and HDMI) has higher speed than the USB 3 port.
    but I just found this page here at the Apple support, which states that the Air and Pro both support 2 displays and the retina MBP one more through the HDMI port, so I guess now it's official

  • IPhoto '06 iweb/NO HOMEPAGE SUPPORT and two computers - what is best?

    I am a science teacher(+PhD student) - and use my powerbook for work/study and my imac as general file store and workhorse. I very dependant on .Mac to swap info and publish web pages(mostly pictures) on the fly etc. I need a reliable system because I simply don't have time to mess around.
    I have just upgraded both computers to iLife '06 and have discovered that my workflows are going to be bothered - there is no way to edit iweb from both computers - and most importantly share photo files from both(most of my colleagues don't use safari and iPhoto RSS is thus redundant) Now the Homepage button has gone - I can really only run my .Mac picture files from my powerbook. Anything from the imac will have to be data pinned accross/networked. More hassel. I am really cross about this.
    I would just like to be able to load up loads of pictures on to webpage, then later on when I have time to url them with iweb.
    I don't have time to fuss about using idisk and homepage online - too time consuming. I don't want pretty - I just need to be able to communicate the information.
    Shunting photos to a home page was simple way of letting people see your pictures (mostly electron micrsoscope pictures in my case!) - I could send the link in an email and bingo! XP users can join the fun.
    So unless Apple read this and come to their senses sometime soon and allow multi location editing of iweb AND reinstate homepage support in iPhoto '06 I need to desperatly find a solution.
    I notice a similar rant (though more a slanging affair at Apple has been locked! - why?)
    I will have to reinstall iPhoto '05 on the iMac at least. Apparently it is possible to run both concurrently using an external/partitioned drive with the OS on it, is this correct?
    I assume this means the other drive with the OSX on it will thus have it's own directory structure Library/Application Support etc - so there will be not conflict with the main system. Is this correct? What about my home directory - will iPhoto '05 and iPhoto '06 display the same photos - just with a different interface?
    On the iMac I will just need to use the start up disks which have iPhoto '05 on them.
    Other options involve getting an other web server and use something like Dreamweaver (well actually MacJournal has a simple web page creation tool - enough for me!) - but again I will have my swift work flow ruined.
    I could spend hours fiddling with this - but I think a back step to iphoto '05 on my imac is the only option - but I lose out on the vast photo storage that iphoto '06 allows. On balance it is the better option.
    Any one out there have a basic run through of what I need to do - or any one have any ideas? I am not a computer dunce - I simply don't have the time to be constantly fiddling with things.
    As they say "you can take my money, my belongings, maybe even my missus! - all are replaeable - but no one can replace time wasted!
    12" Powerbook G4 60GB/1.33GHz/1.25GB RAM/Combo +20" iMac G5 250GB/2.1GHz/1.5GB Both 10.6.4   Mac OS X (10.4.6)  

    Welcome to iLife 06,
    This is a major problem, and you'll notice that this discussion area is ripe with users like you and I who are furious over this. Apple has just orphaned Homepage.
    Here's a thread where we were discussing it and some people posted work arounds. Notice that this thread has been locked! The only locked thread I've ever seen on an Apple board. What's that all about?!
    http://discussions.apple.com/thread.jspa?threadID=331564&tstart=0
    Share your concerns directly with Apple. Let's hope that an upgrade or batch comes out soon that re-enables Homepage or that at least provides some way to migrage the pictures over. I have 100s of such pictures, now orphaned.
    Best,
    - Seth

Maybe you are looking for