Westell 6100 internet light goes off about 2-5 time an hour

Hello,
I have a westell model 6100 modem and for about a week the internet light has been going off aobut 3 times an hour, it doesnt go red, it just goes black with no light. i was wondering if there was a way to fix it.

try replacing the dsl modem. i had the same symptoms. it took verizon one month to tell me the dsl modem is bad.

Similar Messages

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

Apple TV status light goes off by itself,power cord is on but I'm not watching ATV programes ,I'm just watching tv show on my HD TV.can anyone help?

Apple TV status light goes off while I was watching tv show on my HD TV not Apple TV .the Apple TV power cord is on,I need to switch the power on and off then the status light goes on again on Apple TV is this normal?

i need to turn the power on and off and then the status light come back but if im watching movie or airplay it working fine.if im not watching anything on apple tv but some show on my tv then it happen.

Need Help - Light goes off on screen!!

Have Satelitte Pro A200 and as i am working its like as if the light goes off in the screen, it may switch back on, but usually I have to close the screen down and leave to laptop go into hibernation and then open up again. this is very frustrating please Help!!!!

Thank you for using the Toshiba Laptop Forums. Since there have been no posts to this thread in several days, it is being marked "read only" as part of our routine message board maintenance.
If you still need assistance, please feel free to post a new message or contact the Toshiba Customer Support Center at 1-800-457-7777.
Trina W
Moderator

TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

Try resetting the PRAM and SMC. Try making the device a favorite .
Barry

Light goes off or System crash During Upload data through BDC Call Transaction ..

Hi Experts ,
                How do I know how many records had been updated in database while uploading the flat file through BDC call transaction ,the system suddenly crash or light goes off ..............
Thanks and Regards .
Om prakash

Hi Prakash,
i have already told toy to use bapi to get all the error and success messages, through which you don't need to do all the above stuffs, the first method you have shown is based on algorithm , which might not be correct each time, and the second method is handy.
You can add these code lines in your BDC which will give you all error and success messages
DATA : BEGIN OF options.
         INCLUDE STRUCTURE ctu_params.
DATA : END OF options.
DATA: i_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
       l_message LIKE bapiret2-message.
DATA: p_mode TYPE c.
DATA BEGIN OF it_error OCCURS 1.
DATA : text(100) TYPE c.
DATA END   OF it_error.
DATA BEGIN OF it_success OCCURS 1.
DATA: text(100) TYPE c.
DATA END   OF it_success.
START-OF-SELECTION.
PERFORM upload_data.
*   Report for success
   PERFORM success_text.
*   Report for Error
   PERFORM error_text.
END-OF-SELECTION.
CALL TRANSACTION 'your transaction code' USING bdcdata
                             OPTIONS FROM options
                             MESSAGES INTO i_messtab.
     IF SY-SUBRC NE 0.
       CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
         EXPORTING
           id         = sy-msgid
           number     = sy-msgno
           language   = sy-langu
           textformat = 'ASC'
           message_v1 = sy-msgv1
           message_v2 = sy-msgv2
           message_v3 = sy-msgv3
           message_v4 = sy-msgv4
         IMPORTING
           message    = l_message.
       CONCATENATE l_message '-' wa_input-newko wa_input-wrbtr wa_input-budat INTO it_error-text
       SEPARATED BY ' '.
       APPEND it_error.
     ELSE.
       CONCATENATE 'DATA UPLOADED SUCCESSFULLY :' wa_input-newko wa_input-wrbtr wa_input-budat
       INTO it_success-text SEPARATED BY ' '.
       APPEND it_success.
     ENDIF.
     REFRESH bdcdata.
     CLEAR: wa_input,l_message.
ENDLOOP.
***ENDLOOP.
endform.
                    " UPLOAD_DATA
FORM success_text .
   LOOP AT it_success.
     AT FIRST.
       WRITE :/10 'Following records successfully uploaded'.
       ULINE.
     ENDAT.
     WRITE :/10 it_success-text.
   ENDLOOP.
ENDFORM.
FORM error_text .
   LOOP AT it_error.
     AT FIRST.
       WRITE :/10 'Following records are not uploaded'.
       ULINE.
     ENDAT.
     WRITE :/10 it_error-text.
   ENDLOOP.
ENDFORM.

LED Light Going Off Every Few Minutes

My LED notificiation light is going off every few minutes. I have no new emails, I have no new texts, no new notifications. i have turned off my phone, I have taken out the battery and put it back in. I have changed my notification settings. I don't know what to do next. Help please! I have a Blackberry Pearl Flip Phone.

Hi,
Check and see if you have a program that has an update in Blackberry App World. That might be it. Also, check and see, your device might have a software update under wireless update. It could be one of those two places.
Doc

Display light going off early 6070

How do I extend the time of display illumination on my 6070, it goes off too quickly. Changing power off or time out doesn't seem to make any difference, can anyone help please?
Thanks and regards

I figured it out. I think it had to do with my old case. I was using a case for my old iPhone 3G until I got a new case for my 4S. When I took off the case, it worked as expected - when I moved the phone from my ear and looked at it, the light went on so I could see the display.
Be interesedt to understand (if anyone knows) how the case may have affected it working differently - going dark when moving away from my ear to see the phone.
Thanks.
Shawn

My internet keeps going off

getting sick of my internet going off all the time could it be mt computer its slef HELP

I have the same problem, my internet keeps going on and off too, its been happening over the last 3 months it ALSO HAPPENS TO MY NEXT DOOR NEIGHBOUR I highlight this because the script reading so called helpers at sky keep blaming my computer/router/filters/wiring I am an IT engineer and it stuns me that both myself and my neighbours have the exact same problem yet there is no fault on the line (so they say) it has got to a point where i cant watch a movie on netflix or skygo without interuption. Paying for 10mb and getting bloody dialup connection and so called help from what can only be described as amateurs. I have to be honest sky have gone from being one of the better providers to probably the worst.My suggestion is do as I am going to do and change providers.

IPod switches off when the light goes off.

When I play music in the car on my Nano, I switch it on, using shuffle. After 40 seconds or so the light of the Nano goes off and the music switches off. I restart it sometimes 8 or 9 times. Suddenly it continues to play, also for a 3 hour drive and doesn't switch off again.
I can find no explanation for this. Any ideas?

Hi Jackie 1,
Since I'm not sure which iPod nano you have, you might want to start here:
iPod troubleshooting basics and service FAQ
http://support.apple.com/kb/ts1382
which has a link to more specific help at:
iPod Support
http://www.apple.com/support/ipod/
Selecting the iPod nano (7th generation) for example, then the troubleshooting section shows this article:
iPod nano (6th generation): Music stops when display turns off
http://support.apple.com/kb/TS3700
Verify that you have firmly connected the headphones to the headphone jack on your iPod nano. The cable should be flush against the iPod with no visible gap.
Hope that works for you,
Nubz

HP Pavillion starts, then the pushbutton light goes off and on again before it starts

When I attempt to start this Pavillion Elite HPE, the startup button light turns on, then goes off and back on several times before the computer finally starts. Occasionally, the screen remains blank. So far, I can eventually get the computer to start up, but I wonder if this is a sign of a failing power supply.

Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Followed by resetting the PRAM > Resetting your Mac's PRAM and NVRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then if those do not fix the problem, you may need to reset your Energy Saver and Keyboard Preferences by readjusting them.

HT1651 after turning on my macbook the power light goes off but the apple sign on the screen continues on for a while and then the screen goes blank and the computer starts and stops repeatly

power light goes on the immediately goes off, screen show apple then goes black without turning onn

You can try disabling emoticons and image previews in your IM appearance settings in your Skype options to see if that changes anything. Some people running Windows XP have had odd graphical and resource issues with versions of Skype above 7.5. The alternative solution would be to downgrade to Skype 7.5 for the time being. You can find links to 7.5 in the thread below. http://community.skype.com/t5/Windows-desktop-client/Skype-7-6-crashes-on-startup/m-p/4031560/highlight/true#M353247

Alarm incorrectly going off since Daylight Savings Time

My alarm is always set for 6:30AM Monday through Friday.
Since Daylight Savings last week, my phone has consistently gone off at 5:30AM, and the 6:30 alarm doesn't go off. If I set a later alarm, say for 6:31AM (in addition to the 6:30AM alarm), my phone will go off at 5:30, and then 6:31... disregarding the 6:30 alarm.
I have deleted my alarms and then rebooted the phone, and then added the alarms back in. Unfortunately, my phone keeps going off an hour earlier than it should.
Last night I set an alarm for 6:31AM and deleted the 6:30 alarm, and my phone went off at 5:31, disregarding the 6:31 alarm.
Any ideas on how to fix this, or am I doomed to wake up at 5:30 the rest of my life?
Message was edited by: louismartini
Message was edited by: louismartini

Or you could expect a product that you pay for to work as it's supposed to.
I don't disagree with that.
The iPhone, and ALL smart phones are highly complex devices. There are several hundred different programs all interacting with each other, in addition to the phone operating system.
This software is constantly being changed and updated. Certain versions will be stable with certain applications. Updates can cause bugs (like the clock not working).
I am a pilot. I do not use the navigation programs on the iPhone. I use a FAA certified navigation system, because I need something more reliable.

IPhone 5s switch off about 3 weeks time and it can't switch on now help

I did not use my iPhone 5s for about 3 weeks time due to I'm trying another phone currently, of course the battery died and I didn't charge it. Now I want to use the phone back but it can't turn on after I charge for an hour or so, the screen is completely blank and I have tried the solution posted by Lawrence Finch online (What to do if your iPhone or iPad will not turn on), but it's still can't be work. My cable and charging point are completely fine as well where my parents could charge on their iphone6. Help thanks.

Hey there Chuanjin,
It sounds like your phone is not responding to anything even after charging it for an hour. Based on the troubleshooting you performed in the post you quoted, it looks like there is not much more to recommend other than having it repaired, and that is what I would recommend:
iPhone Battery and Power - Apple Support
Thank you for using Apple Support Communities.
Regards,
Sterling

My new Westell Modem/Router will work as homenetwork, DSL light works but internet Light is off.

Hello, i recently recieved a new modem/router from verison tech support. Its a newer model adsl2+. Well it will work as a router but won't connect any devices to the internet. The DSL light lights up but the internet does not. It says the same then when i connect it to my other router. The devices are connected, but not to the internet. Please Help. Thanks.

Perhaps this may help you
http://www.dslreports.com/faq/13600
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Westell 6100 internet light goes off about 2-5 time an hour

Similar Messages

Maybe you are looking for