Westell 9100 series 3 and apple TV

I am now not able to connect to a Mac itunes with 3 apple TV's in the house I never had this problem before. I was wondering if anyone had any info on opening ports (how to do it with this POS gateway Verizon supplies) or if they have any fixes for this. 
Thanks in advance 
frustrated 
Burma 

I've known Apple products to use a program called Bonjour to communicate with each other on the network. My own experience with this software shows one thing, and that it tends to be very flaky on anything that is not an AirPort Extreme. It works on a basis of Multicast DNS, which is what is used to identify devices on the network. While I know there are some bugs that routers have with this type of data due to the firmware, I would take very good bets in a power off of all three Apple TVs and the machine running iTunes, then turning on the PC with iTunes and from there, turning on the Apple TVs will solve this issue at least temporarily. I would also include the router as the last and first thing to shut down/reboot in this list, too. If this doesn't help then check the obvious to see if perhaps the Apple TVs are actually on the network and can use Internet services. Once on the network, there isn't much the router can do to cause the devices to not see each other. There is really nothing stopping the devices to be honest.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

  • I purchased a tv series and downloaded the first episode, when I went to download the next episode a message popped up saying "this computer is already associated with an apple id" and won't let me download the rest of the shows

    I purchased a tv series and downloaded the first episode, when I went to download the next episode a message popped up saying "this computer is already associated with an apple id.....You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 41 days" and won't let me download the rest of the shows even though I haven't changed accounts and I'm using the same account I purchased the shows with.

    It's been months, so you may not care anymore, but you can't download songs from multiple Apple IDs over a 90 days period.  Sorry, it's not allowed for legal reasons.

  • We purchased a TV series and latest episode has no audio on Apple TV or my iPad

    We purchased a TV series and latest episode has no audio. Schitts Creek, 4/15. No audio on Apple TV or my iPad. Suggestions?

    Probably an issue with the episode encoding, contact iTunes

  • Does the series Crash come to iTunes and Apple TV?

    Does the series Crash come to iTunes and Apple TV?

    Sorry, but we're all just your fellow users here and have no better idea of if or when any given show might become available in the iTunes Store than you do. We'll all just have to wait and see. You can suggest it here:
    http://www.apple.com/feedback/itunes.html
    but it will be up to Starz to decide whether to license the show to the iTunes Store.

  • Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv

    Hello, since the update, and for three days no longer have access to the apple tv to my tv series bought why? I can play them on ipad but not have access to these series on apple tv
    Thanks

    What model of Mac? Mirroring will require a model from 2011 or later, running OS X 10.8 or later
    About AirPlay Mirroring in OS X

  • I mistakenly asked iTunes to download a TV series and I can't get it to stop trying to download it.   how do I kill the download?

    I mistakenly asked iTunes to download a TV series and I can't get it to stop trying to download it.   how do I kill the download?

    You've got to be freakin' kidding me. I'm in Brazil, I accidentally started a 2.2GB download that it says will take 592 minutes to download, and there's no way I can stop it and download something else until that first download finishes? I would have thought it was unthinkable 15 years ago that anyone would build an app that downloads things but doesn't allow the option of canceling the download, but in this day and age? So much for Apple making intuitive, user-friendly products.

  • Setting series and episode of a TV show in iTunes and now the video won't play

    I have an episode of a TV show in my iTunes library that plays just fine on my laptop and Apple TV. The moment I set the TV shows name, series and episode number (so that it is grouped with the rest of the series) the file will not play on laptop or Apple TV.
    I'm usually ok on iTunes and all other TV shows I am adding I am able to set the tags without any problems.....it's just this one file.
    HELP PLEASE

    I'm having the same problem. Windows 7.

  • I downloaded a TV series and when I try to play it, the screen is just black. I downloaded the latest version of iTunes as well.

    I downloaded a TV series and all the episodes show "downloaded" and when I go to play them in iTunes on my laptop, the screen is black and it wont play. I made sure I have the latest version of iTunes. I have no problem playing them on my iPad. This is the first time this has happened...I have been able to play all my downloads on my PC in the past.

    See if any of these things will get the videos app working again.
    Quit the videos app completely.
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Try the videos app again.
    If that doesn't work, reboot the iPad. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that fails, try this. Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of the movie in the field at the top. When the movie appears in the search - tap on it and it should start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK.

  • Verizon DSL, Westell 6100 Modem and Linksys router

    If anyone is having a hard time getting these three to work together to get on-line, I know your pain. I've spent the better part of two days trying to get these devices to talk to each other. After hours spent trying different combinations and little to no help from Verizon and Linksys I have finally gotten my DSL up and running through my Linksys router. I post this in hopes that someone doesn't spin their wheels like I have been doing over the past few days. Here's what I did to get them to work:
    1. Reset both the Linksys router and the Westell modem
    2. Unplug the router and the modem
    3. Connect an ethernet cable from your Apple to the Westell modem and power it back on
    4. Type 192.168.1.1 in the address bar of your browser of choice. The username should be "admin" (w/o the quotes) and password should be "password" (again no quotes)
    5. It will ask you to update your username and password
    6. Under the CONFIGURATION heading select VC CONFIGURATION and click on EDIT
    7. Make sure that both PROTOCOL and MODE are set to BRIDGE
    8. Click on SET VC and then click OK when asked if you want to reset for new configuration to take affect
    9. Once again power off the modem for about a minute then power it back up
    10. Login again with the login you created above and go to the STATUS/ABOUT column and write down the MAC address
    11. Set it to DHCP OFF and change the Private Lan Modem IP to 192.168.2.1. Write this down and keep it so you can access your modem in the future.
    12. Save the settings. You will lose communication with the Westell at this point. Once again, power down the modem for about a minute.
    13. Connect the ethernet cable from the modem into the Internet port on the Linksys router and then connect your Apple to the first ethernet spot
    14. Turn on both the Linksys router and the Westell modem
    15. With your browser (Safari or Firefox) type in 192.168.1.1. Under SETUP go to MAC ADDRESS CLONE and enter the MAC address you wrote down for your Westell modem earlier and then save the settings
    16. Make sure you are in DHCP mode and not PPPoE
    17. Save, exit, and you should be on-line
    That was a lot more difficult than it had to be. I certainly didn't get this from the support folks from Linksys or Verizon...a lot of trial and error and investigating on-line. I hope this saves you from the headaches I experienced.
    Dual 2.7 GHz PowerPC G5   Mac OS X (10.4.5)   Verizon DSL

    Feedback for Linksys:
    In the Linksys Help system "Easy Answers" there's the question "How can I set up a Linksys router with DSL Internet?" This is what I used to try and solve my Internet connection problem.
    The Answer says "Most DSL providers use Point-to-Point Protocol over Ethernet (PPPoE) ..." and goes on to explain how to set up the router for PPPoE. However, my service (AT&T/Yahoo high speed internet) uses DHCP. That meant I spent several frustrating hours trying to get it to work with PPPoE.
    The Answer would have been better if it first explained how to tell if you have PPPoE or DHCP (see the reply from vness above, it's an excellent explanation), and then linked to the appropriate setup instructions.
    Thanks for the help!!!!

  • Can i change /etc/hosts in verizon modem/wifi router (westell 9100) ? If yes then how ?

    I need to change the hosts file on the verizon FiOS wifi modem / router. The modem is westell 9100. Can anyone tell me how can i do this ?
    I tried telnet and it gave me error as follows...
    C:\Windows\system32>telnet 192.168.1.1:22
    Connecting To 192.168.1.1:22...Could not open connection to the host, on port 23
    : Connect failed
    Please suggest.

    OpenDNS is the right approach here ... you can selectively block specific domains / urls.

  • I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

    I have a samsung scx 4100 series and i just updated to mountain lion and now i keep getting a "filter failed" error, anyone have any suggestions as to how to fix it.

    Hi again, when you clicked on Mountain Lion and Lion in the App Store you are telling the laptop to reinstall them both.
    You may have allowed simutanious downloads checked at the bottom of the window, I don't know, but I expect Mountain Lion is downloading, so Lion is waiting for it to finish, so if you have Mountain Lion installed cancel both download's.
    Cancell both downloads anyway.
    Go to the apple logo , top left, click on it, then click on about this mac, a window will open telling you what's installed,  Mountain Lion is OX 10 version 10.8.2 click on more info, to find out more, Lion will be OX10 version 10.7.4.
    Only update were it say's check for updates, not download now.

  • I downloaded a series and only 4 episodes will show why can't I watch the others even though I purchased the entire series

    I downloaded a series and only 4 episodes will show why can't I watch the others even though I purchased the entire series.  It won't let me watch and every time is select the little cloud it tells me that it is downloading but nothing happens.  I have tried to sync it on my PC but I could only get the first couple of episodes.

    Hi Kousies!
    It sounds like you may need to report this issue with your purchases:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    You can also use this article to try to restart these stalled downloads:
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • If i download a tv series on Apple TV 2, can i transfer it to my iTunes? If so, how?

    I have downloaded a few new series of "Keeping Up With The Kardashians" on my Apple TV 2, and have been trying to get the series onto my itunes, and then onto my iPad. It also doesnt download movies i rent directly on my Apple TV. I have Home Sharing on my computer and Apple TV, and can see my music library and photos on my TV. I'm always checking for available downloads too, and it comes up with nothing. Please help?

    Hi There,
    I had this same question, and I found the answer in the following link.
    https://discussions.apple.com/thread/3953315?start=0&tstart=0
    Best Regards,
    T00nc3s

  • Problem with bose sound dock 2 series and iOS 5.1.1

    Hi everyone i just bought a bose sound dock 2 series,is made for iphone 4 and 4s but with ios 5.1.1. but doesnt work..how could be possible?Dock is ok but i cant hear the music from my iphone 4!!I spent 400 euro!!!
    Please help me!!!
    Thanks in advance

    From what I have read on this discussion boards so far, it sounds as though Bose was using the 12v firewire charging circuit on there Sound Dock and not the recommended 5v charging circuit that Apple told all of its licensed accessory manufactures to start using,when Apple changed the syncing of iPods from firewire to USB2, a few years ago.
    The firmware update has now enforced charging via the 5v circuit and those manufactures that ignored Apple specifications, are now faced with end users, asking those manufactures for a fix, (not Apple.) This has been a well known road map between the accessory manufactures and Apple, for at least 3 to 4 years now.
    Here's the funny part, even apples own HiFi system breaks there own rules and doesn't charge, you would think they would follow there own guidelines, wouldn't you?

  • Bridging Westell 9100 EM

    Does anybody have specific instructions on how to bridge the Westell 9100 EM?

    The COAX LAN WIRELESS is already bridged. If you want you can just turn off the DHCP on the router and do DHCP and/or PPPOE from the other router. LAN to LAN. You do not need to use the WAN Ethernet port or the WAN COAX Port. Do not use the WAN at all on the Westell. That is what I did with my Actiontec. Keep it simple and see if it works. But if you use the COAX from the ONT and not Ethernet then there could be issues.
    If you do not have TV service and use COAX on the WAN for your connection you could just disable the COAX WAN and it would just be a coax LAN port and all is bridged.
    Message Edited by prisaz on 05-08-2009 07:22 PM
    Message Edited by prisaz on 05-08-2009 07:24 PM

Maybe you are looking for