Western Crop Marks in FrameMaker 8

When creating a PDF from FrameMaker 8 using Western Crop Marks, the text above the crop marks is in symbol font. How do we change the font used for that text?
Thank you.

Let me reinforce part of what J Maloney has said:
Never, EVER, allow a printer/publisher to skip the paper proof for something that's going to be mass produced.
NEVER.
They WILL screw it up.
-Noel

Similar Messages

  • Saving as PDF with crop marks.

    I'm trying to create a Printready PDF from my Structured FM file. I recently upgraded to FM9.
    With earlier versions of FM we've had issues with colours not exporting correctly from FM, and I've had to print .ps files, run a colour correction script and then open the files as .pdf. Due to a limitation of my colour correction script I could only print 5-10pgs at a time. Which made the process very time consuming.
    I pitched the upgrade to FM9 to my boss because when I initially tested the trial version and used the 'save as PDF' function, the colours came up correct without having to use the colour correction script.
    HOWEVER, now that I'm trying to create printready PDF's of my document, via the save as PDF function, I'm not getting crop marks/registration marks on my files.
    On the PDF Setup Dialog box I have 'Western' choosen under Registration Marks. (Screen Shot attached)
    Initally I thought it could be because I had the page size set to the exact page size I wanted, but I've tried making the page size bigger and they still don't seem to appear.
    Hopefully this is an easy question and I've just missed something simple!

    Caveat CMYK!
    Unfortunately, it's still not completely reliable. There are issues with quite a number of OTF Pro fonts not rendering correctly, and with spot colour tints and table fills that use spot colours.
    The upgrade to from COlourChameleon to PubliPDF may be still worth considering...
    Also, with your crop mark issue, how big is the page size compared to the output size that you specifed in the PDF Setup? You have to add at least 1cm to the page size to give it room to place the crop marks.

  • Change crop marks offset

    Do someone know how to change crop marks offset into Framemaker 7? I want to extend then to 0.125" (9pt) Thanks!

    These are hardwired and cannot be changed.
    You can always create your own crop marks on Master pages (objects can always be placed outside the defined page boundaries) or change the page sizes to allow you to see what you are adding. At print time, specify the sheet size required. FM always prints the "page" centred on the specified sheet size.

  • CS5 Crop marks don't work in Save For Web

    I'm playing in the trial version of Illustrator 5.
    I'm having trouble figuring out the crop marks.  I select an object and try the various versions of creating crop marks.  But when I Save For Web, it does not use the crop marks as a guide to trim the artwork down.  The crop marks are visible. 
    In CS3, which I've used for years, I would create an object and use the crop mark tool to create the marks at the size of my object.  When I would Save For Web it would save the file to the exact size of my crop marks, no matter if I had artwork in clipping masks that go outside the crops. 
    Why does this not work in CS5?

    You do speak the truth so in CS 4 and now Cs 5 you instead of drawing a rectangle and the making it into crop marks you simply draw an artboard then when you export you select to use artboards in the export dialog  and select the artboard you just made and voilá.
    Now before you go crazy this is an advance you can also choose to export all the artboards a range of artboards or a non-contiguous selection of artboards this way.
    the difference here is that you draw the artborad which is actually drawing a rectangle and making the crop marks as in the CS 3 all in one opertation
    it is really the same feature with lots of features added to it. Including the ability to name the art boards (cropped areas) number them reorder them
    manage them in the artboard panel and then the team went farther than that with pasting in place pasting an element on all the artboards at once.
    It is really just the crop area feature but with lots of possibilities.
    If you need t draw an artboard within another artboard hold down the shift key.

  • How do I print the guides on artwork so that Printer will see crop marks?

    I designed a wedding invitation in Photoshop CS3 and I need to send him samples of the artwork. I wanted to show him where the Guides are located so that he'll know where to do his cuts. I thought that I could should him where those cuts would go by including the Guides on the artwork. I saved the artwork as a jpeg.
    Kareem

    I did a quick online search and came up with the following.
    http://technology.cca.edu/helpsheets/Photoshop_CS3.pdf
    Check it out and see if it helps. If not, please let me know.
    I have seen advice not to use crop marks in CS3....printer automatically doing that and in some cases charges for removing them. But, I have not been there and done that, so...
    ATR

  • How do I print a pdf without the standard crop marks that appear when I have created it in Illustrator originally?

    Hi
    I am so frustrated as I cannot work out why my pdf files that I have created in Illustrator, print out on my printer with crop marks as well as scaling the image to fit them in on the paper. I just want to be able to print it out without the crop marks at the correct and original size it was designed in.
    Help Please.

    The crop marks are part of the design, no reason why Acrobat wouldn't print them. You could try cropping them out in Acrobat.

  • Adobe Illustrator CC 2014 - Custom Crop Marks?

    Hello all,
    I've been looking for a solution to this problem for some time now, and am hoping to find help here!!
    Adobe Illustrator CC 2014 - want to be able to customize how crop marks are created through Object>Create Trim Marks.  Does anyone know of any plugins that could achieve this?  Manually shrinking and shifting the crop marks takes too much time...
    Thanks in advance to any contributors!

    I know of no plugins for this.
    The fastest way we found was to use Libraries.
    1. Make one set of trim marks and save it in the library.
    2. On a new document, make a box the trim size of your doc.
    3. Snap guides to the 4 edges of the box.
    4. Drag out the crop marks (double, triple, with registration marks, or whatever you created in your original Library item).
    5. Snap each of four mark sets to the guide corners.
    Voila.

  • Booklet .pdf with crop marks, booklet doesn't fit the current paper size warning

    Hello. I am on XP using CS4 InDesign.
    I have the document set up as 4 pages, each 8.5 x 11, however, when creating a booklet .pdf, I mean it to be 2 pages 11x17.
    When I add in the crop marks they do not appear on the .pdf when it is created. I receive a warning in the booklet diaglog that the booklet doesn't fit the current paper size and it says to specify a larger paper size.
    What can I do to have the crop marks on my file? I understand the .pdf will be a little larger than 11x17 in order to fit the crop marks.
    Thanks for any help in advance.

    Hi Peter,
    Thank you. I did try that first, but now I figured out what I did wrong. When the .pdf was made and opened, I cropoped the page according to the marks, but the page remained 12 x 18 instead of 11x17. I made sure that the "automatically adjust to fit marks and bleeds" and "use document bleed settings" was checked in the booklet dialog and print InDesign dialog.
    When I cropped the page again to make sure I sized it correctly, it was 11x17.
    Thank you!!!

  • How do I change the alignment of crop marks?

    When exporting a document as a PDF the crop marks are automatically aligned with the edge of the document, but I need to move them a couple of millimetres in to account for the bleed.
    I can't find any options where I can change this. The only option I can see is 'offset' but that just varies the actual distance of the crop marks from the document.
    I'm sure it's something really obvious but I'm going nuts here. Any help would be great. Thanks.

    Why not make the document the cut size and set the bleed in the document? That's out of box and standard.
    Alternately you can use the Crop Marks script found in the Scripts panel and make boxes in your document's cut size, crop marks based on their bounds.

  • Cannot print crop marks in Adobe Reader 9.4.2, 10.1

    Printing from an A4 pdf to A3. Using a full version of Adobe 7 or 9.42. the crop marks appear but using Adobe Reader 9.4.2 and up no crop marks appear. Show art, trim, & bleed boxes is ticked. Does Adobe Reader print these marks?
    Thanks in advance.

    No difference in output using the latest version.
    We are printing to Xerox WorkCentre 7425/7435 printers. When printing from a full version of Adobe Acrobat the advanced button of the Print Driver popup has check options for Marks under Marks and Bleeds while printing from Adobe Reader does not.

  • Test: Using Crop marks in indesign CS4 with Epson 3800 Mac 10.5.7

    Jun 19, 2009 9:35 PM
    Crop marks using indesign CS4 with Epson 3800 Mac 10.5.7
    My crop marks and pages are printing larger than my document sizes.  My paper size is 13x19, so I should have crop marks at the exact corners of the page sizes.  But indesign is printing the entire document larger.  So my document which is 11x14.75 is now printing 11.25x15.5.  All my settings are correct. So, is anyone else using an Epson 3800 with CS4 indesign having issues such as the above?  And can I ask (beg) a few of you to do a test print with crop marks and let me know the results?
    My workflow has been completely stalled because I can't get my pages to print the right sizes with the crop marks at the right measurements.  I'm printing a photo portfolio on the Lumijet double sided paper and "when" it did work awhile back sometime several months ago, the finals looked great. I've already reinstalled both the Epson 3800 driver and the Indesign CS4 software, but the results are still the same.
    So, here are my settings:
    document size: 11x14.75
    in the print panel:
    Printer: Epson 3800
    Setup: Paper size: Super A3/B13x19, scale 100% width & height, page position Centered
    Marks & Bleed: Marks: "Crop Marks" checked. offset: 0, weight: .25, Bleed and Slug: Use Document bleed settings, include slug area.  The bleed is 0 for top, bottom, left and right
    Color Management: Document profile: Adobe RGB, Options: Indesign handles colors, Printer Profile: (A custom made profile using Xrite for the 3800 with Lumijet paper)
    The settings on the Epson 3800
    Epson 3800 Printer
    Presets (set for the profile mentioned above)
    No Color management
    Sometimes, on a whim, the printer and indesign cooperate together like good little children should. But not often.  And I can not conclude why they are nice to each other sometimes, but given the same detailed data at other times, they fight.
    If anyone could run through a similar process using indesign with a photo layout and setting up the printer settings for both the Epson 3800 and in the indesign program and let me know their results, I would value your conclusions very much.  You don't even have to waste paper or ink.  Finally, after wasting so many pages of paper and of ink. I deleted the photos from the page, and printed it blank with only the crop marks for me to measure if it was coming out right or not.
    Thank you for any response.  And feel free to call me if you want to vent about Epson 3800's or about Indesign CS4 anytime! I'm up late....  646 256 8853.
    Thaddeus

    I specified the paper size as strictly 13x19, no boarderless, no retain size.  Same problem.   I also did as you suggested below.  The pdf document does remain true to the document.  As a pdf doc. I changed the color mgmt to Adobe rgb 1998.  It looks okay, but not as lively as I get when printing correctly with my color mgmt working and in sync. 
    Your final question about simply using photoshop.  Well... I might go back to it and give up on Indesign if this is the case that it won't simply crop my documents to the sizes that I input them to be cropped as.  But, I am using Indesign so that I can create a page layout that I can't do in Photoshop.  My folio is about 25 or more pages with double page spreads.  I am printing on a two-sided Lumijet paper and my folio was custom designed to be cut out at 11x14.75.  If and when it is printed correctly, I am printing on both sides of the paper and trimming it to exact size.
    It sounds as if you have exhausted the potential problems and don't have a clear explanation for why the doc isn't printing correctly in Indesign either with the color mgmt. or the document sizes.  I'll try one more print using a different color profile similar enough to get at minimum, an okay print. If it doesn't print at least okay, then it isn't most likely my profile..... Okay done.  Crazy.  The color is inaccurate, but for some reason or another, the document size printed correctly. It measured exactly 11x14.75.  What I have done during this period of time is:
    First) I did as you suggested and turned the Print to Adobe PDF 9 and created a print there. I measured it and it did measure correctly.  I didn't love the color, but... at least it is measuring correctly. 
    Second) I turned the Printer back to Epson 3800 (I'm beginning to think that this simple gesture was what caused the printer to print correctly)  I didn't change any settings, but I did make sure that they were set correctly as before. The paper size was set to 13x19.  When I make sure this setting is right in the "printer" dialogue for the Epson 3800, and then switch back to ID, the printer dialogue in Id changes to "Define by Printer."  But I changed nothing, other than the profile to an older one that I used before. The color is still inaccurate, but at least for two prints just now back to back, the measurements were correct.   What to do? Lol.
    Thanks again for all of your time spent trying to resolve this issue.
    Sincerely,
    Thaddeus

  • EPS file placed within INDD art shows crop marks when exported to PDF

    Hi Friends -
    I have a INDD art file I'm working on, within which I placed an EPS image.  Upon exporting the INDD art to PDF, the document has what appear to be crop marks surrounding the EPS image.  This is not where the image should be cut, and these marks are being shown in a functional part of the design.  Here is a screenshot of one corner of the EPS; the other 3 corners have identical marks:
    Additional information:
    - MS Windows 7 Enterprise SP1
    - InDesign CS5.5  Version 7.5.3
    - Marks are generated during export process/conversion to PDF; they are not visible in InDesign.
    - EPS file does not create these crop marks when placed into another INDD file and exported using the same process as above.
    - No other elements of the INDD file have similar marks displayed after export.
    Any help with where I might find the setting in INDD to turn this OFF would be greatly appreciated!
    D

    That was probably the most expeditious reply I've ever received in a forum.
    Anyhow, the crop marks are not part of the actual EPS image.  Opening the EPS file in PS or AI reveals no stray crop marks so, unless the marks are somehow part of the EPS settings rather than a visible element of the image, I think it has something to do with INDD and its settings.  To confirm, I did place this EPS in another INDD document and an export procedure utilizing the same steps does not reproduce the crop marks.

  • Multiple crop marks in Ai CS3

    Ai CS3, Win Xp Pro
    I'm setting up business cards for two color printing and need crop marks around each card. Total of 4 cards, 7 cuts. In searching for Multiple Cropmarks on the internet, I'm finding articles that say it's not possible. However, I'm now looking at an Adobe livedocs help page that says:
    Define and view additional crop areas
    Select the Crop Area tool, and then do any of the following:
    To create a new crop area, hold down Alt (Windows) or Option (Mac OS) and drag. Each crop area has a unique number in the upper-left corner.
    To view all crop areas, press Alt (Windows) or Option (Mac OS).
    To set a crop area as the active crop area, hold down Alt (Windows) or Option (Mac OS) and click the crop area you want active.
    To rotate between crop areas, press Alt (Windows) or Option (Mac OS) and click an arrow key.
    When I select the first cropped area with the crop tool, and attempt to copy it using the ALT key, a number 1 shows up in the upper left corner (ok so far). But as soon as I let go of the mouse button, the cropped area just moves to the place I've copied it to, and still has the number 1 in the corner. When I have the crop tool selected, and an area defined, I can press Enter and get a menu. There is an exclamation icon at the bottom signifying "Crop areas: 1", but there's no box to select multiple crops.
    Am I SOL, or is there a trick to this?
    Thanks,
    Sandoer

    Ok, I've sort of answered my own question with a little more research.
    For those that search this topic, here's what I discovered:
    If you have several items that need to be cut, such as business cards, 8 or 10 up on an 8.5x11 sheet, you can
    +create a stroked box at 2x3.5 (for business cards) around each card.
    +one at a time, select a box and from the drop down menus select Filter>Create>Crop marks.
    This will create marks that a printer can use for multiple cuts.

  • Crop mark issue when placing and PDF in Indesign

    I've just had this strange issue that I can't figure out and I'm not sure if anyone else has had it as well.
    I exported a PDF through InDesign with crop marks. I then placed the PDF in Indesign  and for some reason the bleed and the crop marks don't
    show up! I've never had this issue with Indesign before.
    Is it even InDesign, or is it the PDF itself?

    Select show options when placing and select the appropriate crop to choice.
    Bob

  • Adding crop marks to a documents with bleeds & save as EPS

    Working on Adobe CS6
    A sign maker has asked me to submit my artwork for different signs (quite a few of them, in different-sizes) as EPS with crop/trim marks.
    For instance: The size of this sign is 24"x24" with a .25" bleed.  The Artboard shows the right size, and the crop marks show uo as they should.  But once I let go of the Artboard, no crop marks show on my screen.
    Any crop mark I try adding via the Object ("Create Trim Marks") or Effect menu for crop marks, both cases would create them around the BLEEDS, rather than the REAL ARTBOARD, which, of course, defies the purpose of a crop or trim mark...
    I usually submit files for production saved as PDF w/bleeds & crop marks, but this sign maker wants them as EPS.
    Is there a way around it, other than create those marks manually?....
    ...Thanks.

    Set your artboard to the size of your sign and save the file as a pdf with "Trim Marks" checked and the bleed settings where you want them.
    Open the resulting pdf in acrobat and save as an .eps
    Open in Illustrator to verify that you're cross-marks were preserved.

Maybe you are looking for