Western Digital 3T Firewire 800 will not boot iMac
The internal drive on my iMac (intel) is small (300G) and corrupted. My idea was to buy an external firewire 800 drive and use it as the boot disk.
I bought the western digital "My Book Studio" drive (WDB3G0030HAL). I installed the system from time machine backup and it wouldn't boot so I reinstalled Mountain LIon using the recovery partition. After that, I learned it will boot my macBook Pro but still doesn't boot the iMac.
I have found older articles about western digital having problems getting external drives to boot.
Does anyone have newer information or work arounds?
thanks
Dwight
Here is a list of WD bootable drives:
http://wdc.custhelp.com/app/answers/detail/a_id/1787/related/1/session/L2F2LzEvd GltZS8xMzUxNTIzMzIwL3NpZC9ueUFYc1g5bA%3D%3D
You can check to see if yours is on it.
FWIW, are you saying that you have one backup and are trying to boot two different machines with it? Unless the two machines have the same build, that is not possible - Macs simply cannot be booted or run with a system version older than what they came with.
Similar Messages
-
External Firewire Drive Will Not Boot with 10.5.1
I have a Intel Mac Mini and I tried to install Leopard onto a external Firewire Drive. I have done this with 10.4.11 and all works well. The Mac Mini is running 10.5.1 on it's internal drive. I attached the Ext FW drive 320 GB and formatted it using 'Disk Utility' GUID format. I next installed 10.5.0 on the Ext FW Drive. I can shutdown and reboot with 10.5.0 using the firewire drive as the booting drive. I next installed the 10.5.1 update and when it completes it requests a restart, I restart it and it never boots back up just the Grey-Apple screen.
I have left it sit for a long time in this 'trying-to-boot' mode for a longtime because I know 10.5.1 may restart more than once on initial install. but nothing. I have also tried partitioning the drive into 3 40-80-180GB drives, but still the same behavior.
Any suggestions?Went through the motions on that. No positive results. I'm starting to suspect either the enclosure or one of the latest updates.
This what I have found to date.
The Enclosure " Vantec NexStar 3" extrenal USB 2.0 and Firewire. Model NST-360UF-BK
The Drive Seagate Barracuda 7200.10 320 GB IDE Drive
I tried 10.5.0 on an Intel Mac Mini. (GUID format) It boots ok. Install 10.5.1 manually downloaded or automatic it will install the update but will no reboot.
(this part I have to verify a second time) tried the same enclosure on a G4 . I attached the drive formatted it for a PowerPC install and boot. Installed 10.4.10 but not the latest security updates, JAVA, and QT. It will boot ok from the external FW drive. I next install the latest Updates via the update app in the Systems Preference window. After doing the updates for 10.4.10 it will not boot.
So I'm suspecting either the enclosure or the latest updates -
External FireWire Disk will not boot
Hi Forum,
after some installations (OS 10.4.9, latest security update and Qucktime 7.1.6 I canot boot from my external disk (Lacie) connected to FireWire 800 port. The Apple shows up but then nothing more happens. Does anyone have a hint?
Thanks
OliverAdd me to the list also. I had an external firewire disk as a RAID mirror for my boot disk. After a system crash (and some problem with my internal disk) I couldn't boot from the firewire stripe. This used to work.
I've tried creating a single-disk "degraded RAID pair" on the external disk and cloning the internal disk to it (using Disk Utility "Restore"). The cloning works fine but I can't boot from the copy. This is how I originally set up the RAID pair (clone, boot from clone, add internal disk to RAID group). This used to work. I bought a new firewire disk and it has exactly the same problems.
My original firewire disk was an Acomdata E5. My new firewire disk is a Coolmax Gemini CD-311 enclosure with a Hitachi 250GB deskstar inside.
iMac G5 Mac OS X (10.4.9) -
I connect a FW HD and select it as my start up drive. It has recently been upgraded to Mac OS X Tiger from Panther. This problem started when panther was installed, but upgrading to tiger didn't resolve it. I can't boot from this drive like I used to. It is still useable as a HD, but I'd like to be able to boot from it.
When you last formatted the drive, and mounted it in the Finder, did you make sure that Get Info's Ignore Privileges was not checked?
-
Leopard will not boot from Firewire HD
Hello,
The issue is this,
I have a Mac Mini G4 (M9687LL/A) and I am "trying" to install 10.5 on to a external firewire drive. The Drive is Acomdata 160GB Firewire dirve with a Partition Type of Apple Partition Map and is formated in Mac OS Extended (Journaled) So I boot off the Leopard install DVD and I install it to the firewire drive and all goes well. Then when I try to boot from this drive it will not boot off the FWHD. When I restart the mac and hold the option key to get the boot menu, I do not see the Firewire drive only the internal drive? So if someone can help me on this or is having the same issue let me know. ThanksWelcome to Apple Discussions!
Unfortunately, Acomdata's record on the matter isn't quite clean*:
http://www.macmaps.com/firewirebug2.html
My recommendation, swap out the hard drive case and put another one in its place around the hard drive that is known to be compatible. The only two companies I know of are http://www.macsales.com/ and http://www.cooldrives.com/
There may be others you can write to on the above FAQ*. The problem is not all Firewire nor USB drives are bootable.
Another thing you may be running into is that if you want to use the keyboard to startup from an external drive, you may need an Apple keyboard to be certain the C or Option keys work. Option key should work if you have the right keyboard:
http://docs.info.apple.com/article.html?artnum=106178
Finally, Time Machine is not a bootable backup, but does backup everything. Currently only Carbon Copy Cloner, and Apple's Disk Utility offer bootable backups of Leopard.
- * Links to my pages may give me compensation. -
External HD will not Boot PPC Mac
I have a ppc mac running OS 10.5.8 and an external hard drive, formatted with Apple Partition Map and containing a clone of the ppc mac. Using the firewire interface, this external drive will not boot the computer.
Any suggestions on troubleshooting this problem would be greatly appreciated.A few drives don't support booting a Mac at all.
If you have a Western Digital model, here's a list showing which ones should, or should not, boot Macs: http://wdc.custhelp.com/app/answers/detail/a_id/1787
If you have another make, check with the maker. -
Intel iMac will not boot past gray screen
Intel iMac will not boot past gray screen
my system:
new (month old) 24" intel imac, 2.8 ghz, 4 gb ram.
running: leopard (upgraded from tiger, which was pre-installed at purchase), installed 10.5.1 update right before this huge problem occurred.
install discs on-hand: two-disc tiget set, single leopard upgrade disc.
what led to this:
i wanted to install windows using bootcamp on a 50 gb partition.
at this point i was running leopard 10.5
i followed all bootcamp instructions, printing out the guide, as well. once i got into the windows setup, i was prompted to choose a partition to install windows. unlike the bootcamp guide, which showed three partitions, one clearly labeled "bootcamp", i saw only one partition. not wanting to risk writing over my mac partition, i quit the setup and rebooted the mac os. after some googling around, i looked for firmware updates (didn't need any), and then software updates. i decided to try updating to 10.5.1.
i then ran through boot camp again, deleting my previous windows partition, creating a new one, and moving forward as before. once again, i was only shown one partition to choose from in the windows setup. i exited the setup again to reboot through the mac os, but this time, i was only given a blank gray screen.
here's what i have tried so far:
booting from a CD, holding down the C or D keys: no response (in fact, i have to restart the computer holding down the mouse button to be able to eject the CD)
booting with option key held down: gray screen
booting with option key held down with external bootable firewire drive attached: the firewire drive appears as a boot icon, and i can click on it within a five second window, but then the screen freezes after that time period, and nothing changes
booting into target mode while attached to another mac: gray screen (no firewire icon, and drive never shows up on other mac)
resetting NVRAM: i'm able to hear the boot chimes, but no difference in performance. gray screen every time
Safe boot: nothing but a gray screen
Verbose mode: gray screen
Single user mode: gray screen
Single user mode with firewire drive attached: occasionally (not every time), i am able to get the white on black terminal to show up. from here, i'm able to run fsck, but it appears to only be checking the firewire drive. i have tried several times to boot from here, and once it took me to a blue screen with movable arrow cursor, but it never went beyond this.
is there anything else left to try before taking it to apple?
any help would be greatly appreciated.
thanks,
Casey Burns
Casey Burns Illustration and Design
http://CaseyBurns.comI'd call Apple support at this point. You'll need
to put this issue on the record.
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
The wait may be long for an agent to come on the line
so expect that and have some other stuff to do in the meantime.
If you have the applecare protection plan, I'd ask about "onsite"
service.
I like your work ! Good luck !
Slim
Message was edited by: slimpikkunz -
IMac will not boot from any mode except Target Disk
I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot, and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
I reformatted the HD and installed 10.7 again, it still freezes up at the same point.
I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
UPDATE...
Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own. I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
I did manage to have it start one time got a copy of the the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
Specs...
The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
Error Report…
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0Here is the complete error log...
Sat Sep 1 17:13:12 2012
panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80602db800 : 0xffffff801a41d5f6
0xffffff80602db870 : 0xffffff801a4b7b95
0xffffff80602dba40 : 0xffffff801a4ce4ad
0xffffff80602dba60 : 0xffffff7f9bab8654
0xffffff80602dbb60 : 0xffffff7f9baa218c
0xffffff80602dbbb0 : 0xffffff7f9baa20e2
0xffffff80602dbbd0 : 0xffffff7f9ba73554
0xffffff80602dbc00 : 0xffffff7f9aa8d470
0xffffff80602dbc40 : 0xffffff7f9aa8d3df
0xffffff80602dbc60 : 0xffffff7f9aa926ec
0xffffff80602dbcf0 : 0xffffff7f9aa8af20
0xffffff80602dbd20 : 0xffffff7f9aadacc7
0xffffff80602dbd70 : 0xffffff801a833b9b
0xffffff80602dbdc0 : 0xffffff801a862d57
0xffffff80602dbe30 : 0xffffff801a497cef
0xffffff80602dbe80 : 0xffffff801a420abd
0xffffff80602dbeb0 : 0xffffff801a410448
0xffffff80602dbf00 : 0xffffff801a4195fb
0xffffff80602dbf70 : 0xffffff801a4a5ad6
0xffffff80602dbfb0 : 0xffffff801a4ced13
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide: 0x000000001a200000
Kernel text base: 0xffffff801a400000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26349024446
last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver 2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
loaded kexts:
com.apple.driver.AppleHDAHardwareConfigDriver 2.3.0f2
com.apple.driver.AppleHDA 2.3.0f2
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.iokit.IOBluetoothUSBDFU 4.0.9f8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMuxControl 3.2.6
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.1
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AirPortBrcm43224 600.36.17
com.apple.iokit.AppleYukon2 3.2.3b1
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBUHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
USB Device: Trackball, 0x046d (Logitech Inc.), 0xc404, 0x1d120000 / 4
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3 -
IMac will not boot up. Need to transfer data iMac (2006) iMac (2009)
I have an iMac (built/sold late 2006 -400 Firewire) and an iMac (built/sold late 2009 - 800 Firewire).
I have connected computers with a 400 to 800 Firewire cable.
The old iMac will not boot to desktop. It was suggested to hold down the "T" key and then power up the iMac. This was done and the old iMac shows a "Y" shaped icon that appears to be a Firewire icon. The old iMac does not show up on the desktop of the new iMac.
I would like to transfer data from the old iMac to the newer one. Suggestions ?
Thanks.
old iMac OS 10.4.xx
new iMac OS 10.9.2She's holding T down on the old computer.
Which is the way it has to be done. The old computer's hard drive will mount on the new computer.
To use FireWire target disk mode
Make sure that the target computer is turned off.
If you are using an Apple portable computer such as a PowerBook or MacBook as the target computer, plug in its AC power adapter.
Use a FireWire cable to connect the target computer to a host computer. The host computer can be powered on.
Start up the target computer and immediately press and hold down the T key until the FireWire icon appears. The hard disk of the target computer should become available to the host computer and will likely appear on desktop. (If the target computer is running Mac OS X v10.4 Tiger, you can also open System Preferences, choose Startup Disk, and click Target Disk Mode. Restart the computer and it will start up in Target Disk Mode.)
When you are finished copying files, locate the target computer's hard disk icon on the desktop of the host computer and drag it to the Trash or choose Eject (or Put Away) from the File menu.
Press the target computer's power button to turn it off.
Unplug the FireWire cable.
(my emphasis).
Excerpt from: http://support.apple.com/kb/ht1661
The terms are Target and Host. The old iMac is the Target, the new one is the Host. -
My 2009 macbook pro will not boot up and I have tried everything to get it to work. Please help!!!!!!
Do you have an external drive? If no, then you will need to purchase a drive so you can backup your data.
If you have a drive that is formatted as GUID you can select to install OS X from recovery mode on the external drive. Now you can boot from that drive and make a backup of your internal drive so you can erase and reformat the drive.
Recommended Drives
USB 3.0 drives work on USB 2.0 but you do get 2.0 speed. They are cheaper because they are popular PC drives. If you get a new computer you'll get the bump to 3.0 speed. I don’t recommend FW. The newer computers don’t have FW ports. You would need a connector in order to use the drive on a newer computer.
Size: I recommend either the 2T or 3T drives. Often they are cheaper than a 1T drive. The 4T drives have more issues and failure rates.
Many drives come formatted for PC but easy to format in Disk Utility.
This Western Digital drive has good reviews: Has a 2 yr warranty. Comes formatted for Mac but I would still format using Disk Utility.
WD My Book Hard Drive for Mac 2 TB (WDBYCC0020HBK-NESN) $99
WD My Book Hard Drive for Mac 3 TB (WDBYCC0030HBK-NESN) $119.99
Check the warranty when comparing. The longer the warranty the better the drive. WD makes cheaper drives but with almost no warranty.
Locally, Best Buy seems to have the best prices. -
Power Mac G4 400 MHz (AGP graphics) will not boot from hard drive
I have a Mac G4 400 MHz (AGP graphics) Machine Model: PowerMac 3.1 CPU Type:PowerPC G4 (2.8)
When I try to boot from the hard drive I get the folder with the flashing question Mark. The Machine will start up from the OSX 10.4 installer disk.
The system was running OSX 10.4.9 fine. I began to have problems with the hard drive, so I replaced it with an old Maxtor 5T040H4 40Gig Apple branded drive that I had sitting around.
The drive is jumpered (r50) for Master/Single.
I erased the drive in the old G4 using disk utility and wrote all zeros. I then used my store bought Tiger 10.4 install disk to install 10.4 on the drive.
After restarting I still get the flashing question mark. If I leave the Install disk in the DVD drive the system will attempt to install again.
I have zapped the PRAM, pressed the CUDA button, removed the battery and let the system sit unplugged for over and hour and it still will not boot from the hard drive.
To test the drive I removed it and put it in a Granite Digital firewire enclosure and connected it to another mac. The drive shows up and the system appears to be installed correctly.
What am I forgetting to do? Does anyone have any suggestions.
Thanks in advance.
Wesley G.Hi! If Tom's solution doesn't work I would reboot from the install disc and then partition the drive as 1 partition instead of erasing it. Sounds like the driver on the disk is too old and installing a new partition map should write a new driver to the drive that is compatible with Tiger. Other than that it is possible that the drive has a spin delay jumper enabled and the drive isn't spinning up fast enough and the computer isn't looking long enough for the drive. Tom
-
Mac Mini (PowerPC version) will not boot - or reinstall...
All of a sudden my MacMini is playing up. It will not boot. I have tried leaving it overnight and reinstalling the OS to no avail.
It boots from CD and reads the install disc, but it hangs everywhere for ages. It verifies the install DVD - then just fails to install. And I have tried installing to external USB drives too with the same result.
I have run DiscWarrior twice and that sees no problems...any ideas? Any help will be greatly appreciated,
NeilDoes the external HD have a GUID partition table?
Is the external drive formatted Mac OS X Extended (journaled)?
Is this a 2011 or late 2012 Mac?
How was Mavericks installed on the external drive?
Who is the builder of the drive mechanism in the external drive?
Who is the builder of the external enclosure?
What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
Is the external enclosure directly connected to the mini?
Have youtried a different interface cable? -
Mac Mini i7 (Mavericks) will not boot from the external drive
Mac Mini i7 (Mavericks) will not boot from the external drive with Disk Warroir 4.4. or Drive Genius or Lion.
Not even from the external Firewire hard drive with MavericksDoes the external HD have a GUID partition table?
Is the external drive formatted Mac OS X Extended (journaled)?
Is this a 2011 or late 2012 Mac?
How was Mavericks installed on the external drive?
Who is the builder of the drive mechanism in the external drive?
Who is the builder of the external enclosure?
What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
Is the external enclosure directly connected to the mini?
Have youtried a different interface cable? -
Hey everyone,
I am having a strange problem, My computer will not boot up on the 1st try after it has been shut off for 2 hrs or more. Here are my specs and then I will go into more detail. I like to use pictures because some of the terminology escapes my vocabulary.
MSI P6N Diamond LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard
Intel Core 2 Duo E6850 Conroe 3.0GHz 4M shared L2 Cache LGA 775 65W Dual-Core Processor
ZALMAN CNPS9700 LED 110mm 2 Ball CPU Cooler
2 X Seagate Barracuda 500GB 7200 RPM SATA 3.0Gb/s Hard Drive In Raid 0
XFX GeForce 8800GT 512MB 256-bit GDDR3 PCI Express 2.0 HDCP Ready SLI Supported Video Card
Kingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
BFG Tech 800W Power Supply>>+3.3V@24A,+5V@30A,+12V1@20A,+12V2@20A,+12V3@20A, +12V4@20A,[email protected],[email protected]
2 X LITE-ON 16X DVD±R DVD Burner
SONY Black 1.44MB 3.5" Internal Floppy Drive
COOLER MASTER Stacker 830 Evolution Black Aluminum ATX Full Tower Computer Case
Logitech Z-5300 Speakers 5.1
Samsung SyncMaster 204B monitor
Logitech G5 mouse
Windows XP home, SP2
Build Date 11/26/2007
Problem:
After being shut off for more than 2 hours my computer will not boot up on the 1st try. It goes to a message that says"Reboot and select proper boot device or insert boot media in selected boot device and press a key". I shut it down using the power button, wait for the hard drives to stop spinning, and then hit the power again and it starts up just fine. It will restart just fine also as many time as I want to restart it, after it has been running in windows. Once it is running, it runs terrific, no problems at all.
If you go right into the bios after sitting for a while you see this in the boot sequence, notice there is no hard drives(Nvidia Stripe)in the boot sequence.
After shutting it down and starting right back up this is what you see in the boot sequence. This pic is from a different time, thats why the boot sequence is different.
Here is a short youtube video (2:10 sec) made to help show the problem. (I called it a Cold boot Storage problem for another thread) just ignore that.
Things I have done to try to solve the problem:
1. Update the bios
2.I have moved the boot sequence around, Foppy1st, or CD 1st, ect. and even disabled the [USB:HP Photosm] in the boot sequence, Hard Drives are 1st now.
3.Replaced the Mobo Battery thinking that it was not remembering the boot sequence
4.Checked that the Hard Drives are connected to the correct plugs (6-7) on the motherboard, and that the raid connector JP1 was shorted out for Raid 0 and the blue indicator light was flashing.
* Just a note in this area. I did set up the Raid 0 with a tech from MSI because I was having an issue with the initial set up, and I did use the Nvidia raid drivers that came with the motherboard. Pchas01 in another thread thought that this could be part of the issue because it is not necessary to load the drivers when you set up the Motherboard in the Raid mode.
F10 and look in the Raid Array
5. Pulled the jumper off of JP1 and it just went to the "Reboot and select proper boot device or insert boot media in selected boot device and press a key" screen much faster, but would never boot up after 5 tries. Put the jumper back in and started up on the 2nd try like the normal problem.
6.Went into the On-Chip ATA devices in the bios and Changed the Raid Mode to an IDE, I cannot F10 and get into the Raid Array now, but I guess that is normal.
Now this is what my boot sequence currently looks like.
That is the point that I am right now. It runs great, games are awesome on it. Its just does not want to start up on the 1st attempt.
Thanks for any help on this
Chris aka Fritzpeed novice builderThanks for the reply,
I started with the easy fixes first, changed the sata cables, and tried different power supply connectors. Both tests had same results, still boots up on 2nd try. I did not know how soon the problem would re-occur after it has been shut down, my shortest time so far is 25 minutes.
Quote
Why only one RAID channel is enabled? Array can't be detected in that way...
Well right now, it is not even set up that way, in my #6 problem solving, it was suggested that I turn the Raid Mode off and try [IDE] to see if that made a difference,"because I don't need Raid enabled for the hardware raid". It did not, it only booted to the "Reboot and select proper boot device or insert boot media in selected boot device and press a key" window about 60 seconds faster. It is currently set up in this way.
This is how it looks in my On-Chip ATA Devices
How do I check this?
Quote
Does the problem persist when you use Silicon RAID instead Nvidia RAID?
I am still working on getting the seagate diagnostics to work, I am getting an error message before I can even test them.
I do have another question. Why is my HP Printer showing up in the Hard drive test, and also why is it showing up in my boot sequence, is this normal?
And speaking of boot sequences I got in there again just now and saw 2 [USB:HP Photosm]
Thanks again, still working on testing hard drives.
Chris -
Brand new iMac will not boot, just make's funny "bonk" sound.
I have a brand new iMac (Intel, 20-inch flat panel). Just out of the box. Ran through set-up wizard. Used firewire to transfer files from an old CRT iMac. All was good for about an hour.
Tried to empty the trash. Finder says Trash was emptied, but, if I open the Trash, the 50-odd files I just deleted are still visible! If I try to select one, its icon immediately disappears. Hmmm....
I decide it's time to restart.
Upon restart, computer will not boot.
I push the power button. I hear the startup chime as usual. Screen lights up gray. But no apple logo on the screen. There is a long pause. Screen remains gray. Computer then starts making a soft "bonk" sound every 4-5 seconds. (Kind of hard to describe the sound, just imagine clipping the very first fraction of a second of the normal Mac startup chime, and repeating it every couple seconds.) This continues indefinitely.
If someone has experienced this, or has advice, please let me know your thoughts. Feeling rather bummed. Thanks in advance!!!
iMac Intel 20-inch 2.16 GHz Mac OS X (10.4.8)Boot from the Install Disk 1
I cannot boot at all (see my post above). The
machine just sits there with a blank gray screen.
I appreciate the article link, though. I've already
read it and it will make a great reference for the
future, provided I can get back to a place where this
iMac actually runs.
Since you're new to Macs, I'm sure you don't realize that while your iMac is sitting there with only a gray screen, you can insert/push in "Install Disc 1" - and it will be accepted. Then press and hold down the power button until iMac shuts down. After waiting a few seconds until everything has settled, press power button and immediately upon hearing the usual Mac startup tone/chime/chord hold down the "c" key until you see the spinning progress indicator below the Apple logo. It will boot to the DVD, you will be able to use (from the Utilties pull-down menu) Disk Utility to "repair" the hard drive directory, then you will be able to quit the installation process, choose Startup Disk from that same Utilities pull-down, and restart your iMac:)
Maybe you are looking for
-
Copying tables in pdf's to excel in Acrobat Standard 7.0.8
Hi there I am having problems copying tables of numbers from pdf's into excel in Acrobat Standard 7.0.8. I am finding that when I select data in a table, right-click, and select 'Copy As Table', only about 50% of the time will the data be pasted corr
-
Error when executing the query or refreshing the workbook
Hi All, Whenever I am trying to execute a query or refresh a workbook a error message is poping up saying that Error: <internal error> Problem when writing table: E_T_cel. I face this error in few of the queries and when i refresh workbooks. These qu
-
Rendering Portlet True through Programmatically in Webcenter Portal App
Hi, In web-center portal application, in home.jspx i have dragged & dropped a portlet and declaratively i had given portlet as False, i want to make it True through programmatically, based on some condition in Bean. How can i achieve this...? Regards
-
I am installing Photoshop 12 on a new Windows 7 based PC. After installation, I tried to run the updates. They gave an error message and would not install. What to do next?
-
please read quesiton thanks