Western Digital 80GB Portable 2.5" Passport + PBG4

I was wondering if a Western Digital 80GB Portable 2.5" Passport will work with a G4 PowerBook. As in, can I only use one USB port to power it.
I bought a LaCie Mobile Drive 80GB and found out the the 15” PB Hi Res, which I have, has less power going to the USB ports. So I have to use both USB ports to power it and it is very annoying. I know some USB harddrives have to work, like an iPod. Well im thinking of returning it for a Western Digital one but I don’t want to want to have to buy one to test if it works or not.

I've recently installed a Hitachi Travelstar 100GB 7200RPM drive into my 12" PowerBook and the difference in performance over the original Hitachi 40GB 4200RPM is very noticeable.
For example, startup now happens so quickly that I often miss it if I look away. As my primary use for the PB is iPhoto (with a library of several thousand images), scrolling through the library used to be a pain with lots of the spinning beachball but now it happens with no lag. Everything seems to happen very smoothly now. I would expect you to see similar benefits in your work.
I also have an older IBM Travelstar 60GB 5400RPM and the new 7200RPM is still noticeably quicker. However the difference compared to a comparable new 5400RPM drive may be less noticeable.
With that experience I, personally, would have no qualms in buying a 7200RPM drive (cost permitting) for my needs - but I would be a little cautious about buying an FW800-only enclosure if you are planning on upgrading in the future as the new MacBook Pro no longer has FW800.
15 1.25G/12 1G PBs, Mac minis, iBooks G3/G4, Mac OS X (10.4.3) Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

Similar Messages

Western Digital Passport not mounting

I have a western digital passport that I have used a couple of times. Today I was transferring my music and it said there were corrupted files in my music, and all of a sudden the drive will not be recognized anymore. I don't know what to do? I have been reading everything online. I have tried checking disk utility and it does not appear. Tried checking the hard drive on another computer and it didn't pop up. Please all suggestions are helpful.

The Western Digital Passport drives have a reputation for being power hogs. Your Macbook USB port might not be providing enough power to run the drive. This especially might be the case if you are running off of the battery only. Your PC ports might be giving slightly more power that is enough to run the drive.
I have a portable Simpletech drive (120Gb) that actually comes with a Y cable that plugs into two USB ports on my Macbook. This provides enough power to run the drive without needing a separate power adapter. The Western Digitals typically don't come with this Y cable, but one is offered. You can buy one off their website for about $20 that should allow you to use the drive with your Laptop. It's lame that everyone else provides such a cable for free while WD charges, but that's the way it is.
good luck with getting it to work.

Can Time Machine back up to a Western Digital "My Passport Wireless" over wifi?

I bought a Western Digital "My Passport Wireless" external hard drive / NAS to use as a Time Machine backup for my new MacBook Pro. I plugged it in via USB, formatted it to HFS+, and ran Time Machine. All good.
This hard drive has a wireless chip in it, so one can connect to it via wifi, either directly or through a router. When I dismounted the drive and connected via wifi (via my router), my expectation was that I could run Time Machine and do periodic back-ups without having to remember to plug in the drive, etc.
I can see the drive and read/write to it. I am connected as 'admin', not 'guest'. It is named "MyPassport", both when connected via USB and via wifi. When I try to use the drive via wifi for Time Machine, I'm asked: "Do you want to stop backing up to “MyPassport” and use “TimeMachineBackup/TimeMachine” instead, or back up to both?" When I select "Use both", I'm then told: "Time Machine can’t access the backup disk “TimeMachineBackup/TimeMachine”. The operation couldn’t be completed. (OSStatus error 2.)"
Should it be possible for Time Machine to recognize the same archive, whether connected via USB or wifi?
If I cannot, can I at least back up a new archive over wifi. I recognize that the first go at this would take a long time due to slow wireless transfer speed. What does OSStatus error 2 mean?

So you think that you know better than Apple.
NAS is not supported by Time Machine, you can take all the risks you like but do not advise others to do so. It doesn't matter what WD say, they want you to buy one, Apple are the deciders of what is supported or not.
Here's what WD say:
Note: WD does not provide technical support for Time Machine related issues. For assistance with backing up to a WD NAS drive, using the Time Machine application please contact Apple. As the backup application is built into the OS, they are the only ones qualified to diagnose a Time Machine related issue.
Good luck.

Western Digital Passport 320 GB on macbook

Does anyone have any experience in using a Western Digital Passport _320 GB_ model as an external HD with an intel macbook?
Do you power it with 1 or both usb ports?
Had any problems with it?
Would you recommend?
Thanks, .B.

I have the 160 GB model, and it works fine. I only use 1 port to plug it in. I have two partitions- one for data, and one for Time Machine.
Steve

E3200 +Western Digital My Passport 2 TB in time machine osx lion, is it possible?

hi, im going to buy a router linksys e3200, i saw, this router has an usb port for connect an external hd, i read not any hd works with this router, is it true?
i would like to know, does this router work with time machine in osx lion?
does this router work with the western digital my passport 2tb hd?
thanks

Hi elverde, you can open links below.
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a00bdf3f6081412fafa709d15ae9d322_.xml&pid=80&respi...
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=7fdabf9de4f64eddba63d50b11138532_List_of_tested_US...

How do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled.

Western Digital Passport 250Gb external drive and MacBook Pro

Hello,
Has anyone with the 15" 2.2ghz 120Gb hd MacBook Pro able to connect this Western Digital Passport 250 GB external drive to only 1 USB port and has it working?
I intend to buy both of these hardwares, but was told that I may need to get the extra Y-cable that can connect to 2 USB ports of the MacBook Pro since only 1 USB port may not have enough power to work the WD external drive? The WD drive comes with only 1 "standard" USB cable.
Thanks.

I've got the 120GB passport and it's worked when I plugged it into the right-side port. But I prefer my connections on the left (to keep room for my mouse) so I got a powered Kensington Dome hub that I run thru my left USB port and have plugged the HD into the hub and that also works.

Western Digital Passport and itunes.

I recently got a Western Digital Passport external hard drive in order to put my itunes music onto it, so it would not take up so much space on my macbook. I found it relatively easy to move all my files the first time, but then as soon as I downloaded something from the itunes store, it put it onto my computer. Since the artist was the same as some music I already had, it did not recognize that I did not already have it, so I could not simply move the new music onto the Passport.
I was wondering if there was some kind of sync feature for the Passport to macs, because I know there is for windows. All I want is for my music to continually go to my Passport, and not take up space on my laptop.
Thanks!

If the WD drive isn't plugged in, iTunes doesn't know where your library is, and hence can't properly add the new music files where they should go. The passport MUST be plugged in to the mac before you start iTunes or a new library will be created and your new music files will go in to THAT library.
The simple way to correct this is to take the files you added that did not go where you wanted them and put them on your desktop from the folder they are residing in (if you're not sure where they are, just click 'Get Info' on the tracks in iTunes and it will tell you where the real files are). From there, close iTunes and plug in your WD drive.
Reopen iTunes now and make sure in your preferences that the music folder on the WD drive is selected as your music library location. Then make sure 'Copy files to iTunes Music Folder' is checked. Now drag your music files on your desktop in to the iTunes window. iTunes will then copy those files over to the WD drive music folder and add them to the iTunes database.

HT201510 time machine on a western digital my passport wireless.

Has anyone had success in seeing up time machine to backup wirelessly on a western digital my passport wireless?
a bit of guidance would be greatly appreciated
thanks

A third-party NAS is unsuitable for use with Time Machine, especially if it's your only backup. I know this isn't what you want to hear. I know that Time Machine accepts the NAS as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you try to restore, and find that you can't.
Apple has published a specification for network devices that work with Time Machine. None of the third-party NAS vendors, as far as I know, meets that specification. They all use the incomplete, obsolete Netatalk implementation of Apple Filing Protocol.
If you want network backup, use as the destination either an Apple Time Capsule or an external storage device connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
Otherwise, don't use Time Machine at all. There are other ways to back up, though none of them is anywhere near as efficient or as well integrated with OS X. I don't have a specific recommendation.
If you're determined to keep using the NAS with Time Machine, your only recourse for any problems that result is to the manufacturer (which will blame Apple, or you, or anyone but itself.)

Will a western digital 1tb passport se work with lion?

Hi, bought a western digital hard drive at the same time as i bought my mac but it wont work with lion. can anyone help?

My WD Passport is working with Lion.
Did you reformat your drive using Disk Utility to Mac OS Extended (Journaled)?
If you have and are still having problems, I would return it and get the Seagate GoFlex drive.

IMac Backups on Western Digital My Passport for Mac

I have a Western Digital 1TB My Passport for Mac which regularly backs up my iMac. It is creating a backup file apparently every day. I decided to remove all but the most recent 3 backup files and moved them to trash, but am unable to empty the trash. How do I empty the trash now?

Time Machine back ups in the trash are not a good combination.   You may find this link helpfull ...
Solving Trash Problems
and you should also look at Pondini's document   ...
http://pondini.org/TM/ Troubleshooting.html   Section E6 in particular.

Mac mini win7 western digital passport

Hi,
I have a Mac mini recently (4day) and I installed Win7 ultimate 64 on one partition. So far all OK.
I attached a Western Digital Passport external HD 1T; FireWare 800.
Win7 connection driver instaled OK.
I see the HD in the "Printer and device" menu.
With Win7 Explorer i cant find it.
Have a suggestion?
Tank you.

Hello, what Format is the external drive?
Does OSX see the drive fine?

I am trying to use an external HD and need to configure it for the MAC. Can someone explain how to configure the HD (Western Digital - My Passport SE)?

Can someone help explain how to add an external HD to the Mac? I have a Western Digital My Passport SE and need to configure if for the MAC and add it to the HD location on my Mac.

Connect the external drive to the Mac. You can do that while the Mac is on, (If the drive is one that has to be plugged into a wall outlet do that too and turn the power on.) If there is a light on the drive it should turn on.
Now double click on the hard drive icon - top left of the screen of your computer. When it opens look for the Applications folder. Double click that. Next look for a folder called Utilities. Double click. In there you will see a file called Disk Utility.app. Double click on that.
You will now see something like this, with two items on the left. The second one is your new drive.
Select it - one click. And click on Erase - one of the buttons at the top, You will see this.
You must select the Format, it's a drop down - the one shown in the image above is best. You can change the name from Untitled if you want. The name can be changed later if you prefer.
At this point look at the bottom right. There is a button there called Erase. Click on it. Then go get yourself a cup of coffee - this will take a few minutes.

Problème Disque dur Western Digital My Passport Essential 1 To USB 3.0

Bonjour,
J'ai acheté un hdd Western Digital My Passport Essential 1 To USB 3.0 / USB 2.0 Silver.
P/N WDBACX10010BSL
S/N WXK14AA0X1511
Le problème est le suivant : Le disque n'est pas visible, alors j'ai regardé dans le gestionnaire de périphérique un point exclamation d'affiche jaune en disant "WD SES Device USB Device".
Je suis aller sur le site Western Digital pour recherche le driver, après avoir lancer la rechercher il n'y aucun driver disponible en tapant le P/N.
Si quelqu'un pourrait m'aider à résoudre ce problème.
Message was edited by: ageofempiresz

Le problème était le fichier système formaté sous mac. *Les partitions étaient en mac os x étendu.* Windows ne pouvait lire ce système de fichiers.
Alors on essayé différentes file system. *Il faillait choisir MS-DOS (FAT32) pour mac et Windows.*
Après ce formatage nous avons essayé sur un machine Windows vista ou 7. Maintenant ça marche.
Merci de ton aide.

T41 not recognised USB Western Digital Passport 2.5" Ext HDD

My T41 used to worked fine with my WD 2.5" ext HDD. For the past 3 months, do not know what happen every time i plug my ext HDD it just not recognised. When i plug this ext HDD to other computers, it just work absolutely fine.
Can anybody help, please.

I had same issue with same type of pc and USB Western Digital Passport. Problems was on laptop usb ports that had gone broken. Laptop didnt have warraty anymore so i had to connect USB-DISK to docking stations usb port that is still working.
Other solution is to buy usb2 PCMCIA adapter.
Mouse worked on laptop port but no harddrive so i think its was some power issue that laptop usb cannot give enoght power to run harddrive.
Message Edited by outouser on 04-03-2009 12:04 PM

Western Digital 80GB Portable 2.5" Passport + PBG4

Similar Messages

Maybe you are looking for