Western Digital My Book 500GB External Hard Drive

Hello,
Just wondering if anyone is using the Western Digital My Book 500GB External Hard Drive and how do you like it? A few people I know bought this one and say that they like it. One good thing is that it is already Mac compatible.
Any information on this would be great!
Thanks,
Simonne

Looks like it will work fine but I'd highly recommend you buy one that has both ext. FW and USB2 (as opposed to usb only).
http://computers.pricegrabber.com/hard-drives/m/18150941/search=500%20gb%20my%20 book/skd=1

Similar Messages

  • I have Mountain lion. I also have  Western digital as my backup exteranl hard drive. It no longer is compatable with it. Is the Time Capsdule my Apple tern

    I have Mountain Lion.. I also have Western Digital as my back external hard drive service. It is not compatible  now. Is the Apple time capsule

    likely a dead SATA bridge card,  very common
    verify on another Mac however
    Never again be in a position of a single backup of vital data.       Ever.
    see about your likely fault here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

  • I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?

    I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?   I had to re-connect my iMovie t

    USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
    OWC have a few different ones for sale.
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
    Do you also connect the external USB drive to the AC power as well while you use it ?
    Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
    Stewie
    Message was edited by: stewiesno1

  • Verbatim 500gb External Hard Drive

    I recently invested in a Verbatim 500gb External Hard Drive, but plugging it in seems to freeze my elderly iMac.
    Anyone any ideas they feel they would like to share, please get back to me.
    I suspect it is just too big for my old iMac.
    It seemed attractive at the time because Verbatim advertise it as OS9 through to Leopard compatible.
    It is USB2, my old iMac is USB1 and doesn't have Firewire.
    http://www.reghardware.co.uk/2008/06/04/reviewverbatim_500gb_external_harddrive/
    (I will be getting a new iMac / MacBook over the coming few weeks or months)

    Hi, Prince Busta -
    If you are not using external power for the drive, be sure you do not plug it into a USB port on the keyboard. The unpowered hub in a keyboard just can't pass sufficient power to devices such as printers or drives, and can balk at even an optical mouse.
    Even if you are using external power for the drive, try using one of the additional ports on the iMac - or one on an external self-powered hub.

  • I recently received a  WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer  64 and wd   turbo installer is.  Can someone tell me.  Thanks in advance for all your help.

    I recently received a  WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer  64 and wd   turbo installer is.  Can someone tell me.  Thanks in advance for all your help.

    Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

  • How much external memory is necessary for a IMac desktop that has 4GB? I have a 500gb external hard drive and the computer is saying it is full.

    My Imac has been recalled by Apple to replace the Seagte 1TB hard drive.  I was told to back up my computer and I have a 500gb external hard drive.  The computers memory is 4gb.  why is my 500 gb external hard drive not enough space?

    Your backup drive has half the capacity of the internal drive. Depending on how much of the iMac's drive is full, the external drive may or may not be sufficient.
    It is like trying to pour the contents of a gallon milk carton into a half gallon pitcher. You may be able to pour the entire contents into the pitcher - but not if the milk carton is more than half full.

  • Western Digital WD400AAJB Caviar SE 400GB Hard Drive - 7200, 8MB, ATA-100 E

    Western Digital WD400AAJB Caviar SE 400GB Hard Drive - 7200, 8MB, ATA-100 EIDE, OEM
    I found this drive at CompUSA (Tiger Direct) and I wondered if it would work in my mac. Can anyone advise on this?
    Yours in Mac OS X 10.4
    Jose Mauricio Cuervo
    Message was edited by: José Cuervo
    Message was edited by: José Cuervo

    Hi Kappy,
    I assumed since I posted in the MDD FW800 POWERMAC G$ section that it was understood that I have a MDD FW800. Anyway I have a FW 800 1GHz tower. Will this dirve be ok? Thanks for your helkp in advance.
    Yours in Mac OS X,
    Jose Mauricio CUervo

  • WD My Book Pro external hard drive button manager for 10.5

    For owners of the Western Digital My Book series of external hard drives.
    As you may know, the old WD Button Manager software is not compatible with 10.5. However, it seems that neither is the official new software the WD Drive Manager!
    Anyway, I trawled around the internet and came across a version of the Button Manager software with instructions on how to make it work with 10.5 - instructions are in German and English.
    http://www.divshare.com/download/4474545-424
    My version of the instructions:
    Mount the included disk image
    Run the patch script to generate a package on your Desktop
    Unmount the disk image
    Run the package on your Desktop and do not reboot
    Enter the required command in Terminal
    Add the StartUpItem manually
    Reboot
    Works a treat
    Makes me wonder why Western Digital are incapable of writing software that works as advertised.
    Hopefully this will help somebody.
    matt

    I can't say about 10.5, as I am on 10.5.2, but my 2 drives work as you say they should. They power down when my Mac powers down, and the lights on the front operate as they should. They show me the approximate used space when idle, and the lights flicker up and down when the drives are accessed.
    I suggest that you make sure to update your drive's firmware to the latest, and ensure (in Profiler) that the version actually updates. Then remove all traces of the WD software, and reinstall the latest version.
    I say to verify the firmware version, as mine appeared to update, but did not, despite repeated attempts. I got a 9-pin to 6-pin cable and connected the drive to the FW800 port, then repeated, and it worked.
    I should note that I do have one issue: I cannot daisy-chain my 2 WD drives. They will only work properly when connected each to their own port - one to the FW400, and the other to the FW800. I cannot daisy-chain other devices off them either, such as a video camera, or a FW memory card reader (I have not tried a hub).
    Edit: Here's a story on the latest updates:
    http://www.tuaw.com/2008/05/12/wd-mybook-updates-for-leopard-compatibility/
    Message was edited by: AndreTheGeek

  • Mac book pro + external hard drive plus desktop with ethernet router combo

    Can anyone advise - for or against / solutions that might be possible as I'm considering time capsule.
    Currently
    Desktop = Mac Pro - 230GB hard drive no wireless card.
    One ethernet port going to router into which my broadband is piped. Out of the router - ethernet to plug in lap top in other room (hubby not so found of wireless).
    Back up = 500GB external formac drive (noisy and vibrates) connected via fire wire. All my photos and music go direct to the formac drive (are not on desktop or laptop).
    I do backup of documents from desktop to the external hardrive manually.
    I have a mac book pro which I access the internet by the the ethernet (but don't think I can file share because of the router which I think just pipes the internet to both computers).
    *What I would like to do*
    1) Access documents from the desktop vire wireless when working on laptop.
    2) Continue to store photos and music without clogging up my desktop hard drive.
    3) Get a quieter external hard drive (been noisy since day 1)
    4) Easy backup of of photos and music (at the moment only one copy exists on hard drive which I am concerned about (other than DVD).
    5) Turn wireless off when not working on laptop - hubby concerned about privacy and I work from home so have confidential material I have to guarentee is secure.
    Can any one point me to whether time capsule and or other bits would meet my needs?
    Thanks - Lou

    1) is doable I use that functionality Even from Pennsylvania to Michigan
    2) I use the TC as backup for my primary hard drive although I always use two back up hard drives for my primary. I use the Finder not Time Machine.
    3) The LaCie d2 or the quadra work fine with TC. They are quiet and sleep appropriately.
    4) is doable and related to your one.
    5) secure your router and wireless setup is not a problem.
    You can also use the setup of the external to interact with ATV. Like streaming movies to ATV

  • Time Machine Backups.backupdb with "Lacie Rugged 500GB External Hard Drive"

    So I bought a Macbook Pro Yesterday. I have a black Macbook from a few years ago and wanted to transfer my Hard Drive onto the new Macbook Pro. I have an external hard drive called "Lacie", made by rugged/neil poulton with 500GB of space. So yesterday I plugged it into my old Macbook and used time machine to store all of my data on the external hard drive. After it was done I plugged the external hard drive into my new Macbook. I ran Time machine and it took about an hour. Then I clicked on my "LACIE" hard drive icon on my desktop, and dragged the folder "Backups.backupdb" into my Hard Drive on my new laptop. Then a Copy window popped up and said "preparing to copy to Macintosh HD". After about 5-10 minutes the Copy Window displayed "Copying 489,020 items to Macintosh HD, Zero KB of 206.96 GB- Estimating time remaining..." I've left this window open for the past 2-3 hours and nothing has happened. It's still remaining at "Zero KB of 206.96 GB-Estimating time remaining...". Does anyone know how I can fix this problem? Did I skip a step? I feel like after 3 hours it would have at least transferred something or changed somehow. Should I rerun Time Machine?
    Thanks a lot.
    -Luke

    jpdemers wrote:
    Copying a Time Machine archive from one hard drive to another is a very slow process, especially over a USB connection.  You're talking about almost half a million separate files, and the drive not only has to write them all, it has to create a directory that lists and locates all of them.  I'm not sure why the Finder's "Copy" window sticks at zero KB., but if you're patient (we're  talking 15 hours or thereabouts, depending on the performance of the drive), it will all get transferred eventually.  You can see the dated folders popping up on the target disk, if you check on it from time to time.
    I've done it for archiving purposes, prior to getting Firewire drives, but this is entirely the wrong way to transfer files to a new system.  (For one thing, you're copying thousands of system files that aren't relevant to the new Mac, and thousands more that already exist.)  Why do things the hard way, or the wrong way, when Setup Assistant was created for this specific task?
    Amen.

  • Question about LaCie 500GB external hard drives

    Are the LaCie external 500GB hard drives actually 2 hard drives inside the case or just 1? Are they good?
    I read a review that the larger LaCie external hard drives often fail and are not as reliable as the samller ones (like 300GB). Is this true?
    G5 Dual 2.3 GHz   Mac OS X (10.4.6)  

    Hi Tim,
    I have an external LaCie Porsche Design 500Gb drive, and it is definately only one drive. LaCie's spin down when not in use, which some external drives don't. Spinning down extended the lifespan, so I doubt there will be problems because of it.

  • Western Digital Scorpio 2.5" IDE hard drive upgrade soft clicking noise

    Just replaced the original hard drive in my 17" Powerbook G4 with a Western Digital Scorpio 250GB 2.5" IDE drive, model WD2500BEVE. I notice a strange noise coming from the drive every minute or two, almost like the drive is going to sleep and waking up. I contacted WD tech support and this was their response:
    Thank you for contacting Western Digital Customer Service and Support. I apologize for the inconvenience. This issue is caused by a system initiated power management command being interpreted incorrectly by the hard drive. The sound is normal and as of yet, we do not have a fix for it.
    Not sure if it is a larger issue with all WD 2.5" drives but if you have the noise, you are going to have to live with it or settle for a smaller capacity Seagate or Toshiba drive or hope that WD has a firmware update for MacOSX which is slim to none imo.
    Anyone else have this problem or more importantly, are using a WD 2.5" drive and do NOT have this problem?

    dausone:
    This is a known issue with these drives, although not all drives have the problem; indeed, I have seen only a few reports from the many people who have installed them. WD is aware of the issue and there is a fix for PC users of this drive, but not for Macs. I suggest that you call WD Tech Support, or Customer Relations and tell them you would like to have the drive replaced.
    cornelius

  • I have a free agent desk 500GB external hard drive.  Since updating my iMac OS to mountain lion recently, it will no longer backup, stating "an error occurred while creating the backup folder".  Can anyone help me with this?

    I have a free agent desk 500 GB external hard drive.  Since updating my iMac OS to Mountain Lion it no longer backs up through Time Maching like it did in the past.  Now, after completing its work it says, "Unable to complete backup.  An error occurred while creating the backup folder."  I cannot find any sites that help me fix this.  Do I need to purchase a new external hard drive?

    Hi Aaron,
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • Toshiba 500gb External hard drive

    My toshiba external hard drive suddenly quit working. It has all my backed up information and then some on it, including some extremely important files.
    My toshiba laptop (only computer in house) will not load it.
    I am getting a "format before use"message.
    If I reformat it, will I lose all my backed up information? Do I need to take it back to Best Buy? I believe I have a warranty on it still.
    Thanks,
    Dave

    Do NOT format it, that WILL erase your small chance that it's just the enclosure that's died.
    The warranty will not cover your data, or retreiving it, but your store should have some options on how to try to recover it.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • Western Digital is Eating my Mavericks Hard Drive

    Upgraded to Mac OS X 10.9 Mavericks.  It has corrupted my Western Digital internal hard drive.  This is not an external drive, which is what WDC is warning about.  Also, I don't have any of the three WD software programs that are mentioned in their warning.  What other problems are Western Digital customers having?
    MacBook Pro 13 Inch (Mid 2010)

    I currently have a replacement WD drive installed in the MacBook Pro running OS X 10.8.5 rebuilt from scratch.  I have the corrupted WD drive connected externally by Corsair SATA to USB cable to salvage data off of the OS X 10.9 drive.  I also have my Time Machine drive attached by Firewire 800. 
    I have not installed any WD software, either now or in the past.
    From Etrecheck:
    Hardware Information:
              MacBook Pro (13-inch, Mid 2010)
              MacBook Pro - model: MacBookPro7,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              8 GB RAM
    Video Information:
              NVIDIA GeForce 320M - VRAM: 256 MB
    Audio Plug-ins:
              AirPlay: Version: 1.7
              iSightAudio: Version: 7.7.1
    System Software:
              OS X 10.8.5 (12F45) - Uptime: 0 days 4:21:41
    Disk Information:
              WDC WD7500BPKT-00PK4T0 disk0 : (750.16 GB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 749.3 GB (420.32 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS23N 
    USB Information:
              Apricorn                                750.16 GB
                        disk3s1 (disk3s1) <not mounted>: 209.7 MB
                        Macintosh HD 10.9 (disk3s2) /Volumes/Macintosh HD 10.9: 449.3 GB (115.92 GB free)
                        Macintosh HD 10.8 (disk3s3) <not mounted>: 99.48 GB
                        Macintosh HD 10.7 (disk3s5) <not mounted>: 99.48 GB
                        Macintosh HD 10.6 (disk3s7) <not mounted>: 100.11 GB
              Apple Inc. Built-in iSight
              Apple Inc. iPhone
              Apple Internal Memory Card Reader
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Computer, Inc. IR Receiver
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
              Seagate FreeAgent FW 800mbit - 800mbit max
                        disk1s1 (disk1s1) <not mounted>: 209.7 MB
                        disk1s2 (disk1s2) <not mounted>: 999.86 GB
                        Boot OS X (disk1s3) <not mounted>: 134.2 MB
    Thunderbolt Information:
    Kernel Extensions:
              com.sophos.nke.swi          (9.0.3)
              com.sophos.kext.sav          (9.0.3)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.SwitchBoard.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.sophos.autoupdate.plist
              [loaded] com.sophos.configuration.plist
              [loaded] com.sophos.intercheck.plist
              [loaded] com.sophos.notification.plist
              [loaded] com.sophos.scan.plist
              [loaded] com.sophos.sxld.plist
              [loaded] com.sophos.webd.plist
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist
              [loaded] com.adobe.CS5ServiceManager.plist
              [loaded] com.sophos.uiserver.plist
    User Launch Agents:
              [failed] [email protected]t.plist
              [loaded] com.google.keystone.agent.plist
    User Login Items:
              Dropbox
              Google Drive
    3rd Party Preference Panes:
              Flash Player
              Growl
    Internet Plug-ins:
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              Mathematica.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                  22%          Google Drive
                  10%          Finder
                   5%          WindowServer
                   3%          Dropbox
                   3%          InterCheck
                   2%          Locum
                   1%          EtreCheck
                   1%          mds
                   0%          ps
                   0%          mdworker
    Top Processes by Memory:
              336 MB             mds
              197 MB             Finder
              170 MB             Dropbox
              164 MB             InterCheck
              156 MB             SophosScanD
              139 MB             Google Chrome
              128 MB             Google Drive
              98 MB              WindowServer
              90 MB              Google Chrome Helper
              57 MB              coreservicesd
    Virtual Memory Statistics:
              4.06 GB            Free RAM
              2.33 GB            Active RAM
              613 MB             Inactive RAM
              776 MB             Wired RAM
              5.23 GB            Page-ins
              0 B                Page-outs

Maybe you are looking for

  • APP-AR-96024 when applying receipts

    One of my users is getting this error when trying to apply a receipt - they are logged into 11i as Receivables Manager -> Receipt Batches -> Receipts -> Select the receipt record -> Apply. They then begin entering data and the error is produced. I sa

  • Why does my cover flow scroll bar look like THIS?

    here you can see how very often the scrollbar looks like. is there any known reason for that? when I change the size of the cover flow part of the window it changes back to normal. but very often, even in full screen view, the scroll bar looks this b

  • Problem with User-defined function

    Does anyone know how to make the user-efined functionto return a object. We know how to run a java class within cal script and pass the result to that java class. However, what we need is to be able to return the result in the form of a java class wi

  • Creation of multiple users

    Hi All, Please ignore this one i have mentioned subject wrong and i post another one. Edited by: SIDDABATHUNI on Oct 19, 2010 1:59 AM

  • I am fed up with this phone.

    I have had nothing but problems with this phone since I bought it last August. It is slow. Heats up. The screen locks up. It doesn't let me answer some calls. It powers itself down at random... The list goes on.... and on. There is still another 8 mo