Western HD - for Mac and PC use

Hi experts,
I have a western hard drive that is formatted as Mac OS Extended and works fine on my MacBookPro. I am unable to connect it to a PC and I want to be able to switch back and forth between my home computer (mac) and work computer (pc). Does it have to be partitioned to do so? I have 44GB free.
Also, the other kicker, I don't want to do anything that will erase what is already on the disk.
Any thoughts?

This is a little confusing. First off, as mentioned above, you should probably take this to the Macbook Pro Forum, as this is the Mac Pro forum.
Second, when you say your Western Digital Drive...is this an external drive?
Also, are you booting from this drive, or just using for data storage?
If you're simply using it for data storage (as an external) and want to be able to read the data on both mac and pc, you could just format the drive to FAT32. This can be done on either your mac or pc. Note though, that FAT32 will limit your file sizes to 4GB (roughly, can't remember the exact size). So if you have large video files, this could pose as a problem.
Oh, and lastly when you reformat the drive, everything will erase, so you need some other drive to move your files to temporarily.

Similar Messages

I am working with two computers in my profession (Mac/PC). I want to download testversions, lets say Premiere Elements 13, for Mac and PC using my adobe login. Is this possible?

I am working with two computers in my profession (Mac/PC). I want to download testversions, lets say Premiere Elements 13, for Mac and PC using my adobe login. Is this possible?

Sure. Elements is cross-platform, anyway.
Mylenium

How to format an external drive for mac AND pc use

i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
Look at this page for more information on a dual partition drive for Mac and Windows.
http://macosxhints.com/article.php?story=20030613121738812
iFelix

How to partition my drive for Mac and XP use? from a novice

I would like to use my MacBook Pro for both Mac ad PC programs (Office and others) and hear that I can partition the drive. How is the best way to do that? Also I have an external Seagate FreeAgent GoFlex external drive to set up that supposedly can back up both Mac and PC without formatting each time. Do I have to partition the drive first? Do I use Time Machine?

Is it your intent to run Windows programs on your computer? If so then this is more than simply a partitioning exercise.
In order to use an external drive on both Macs and PCs there are two options. Option One is to partition and format the drive MBP and FAT32, respectively. OS X can read/write a FAT32 formatted drive. However, due to filesystem differences some features of the OS X filesystem are not supported by FAT32, so FAT32 is not the best choice for transferring OS X documents, but would be fine for transferring Windows documents.
Option Two is to partition the drive using GUID then creating two partitions. One partition is formatted Mac OS Extended, Journaled and the other partition is formatted FAT32. Each partition can be used for the data from the appropriate platform.
TM is not a file transfer program, cannot be used for Windows documents, and does not work on Windows.
If you wish to run Windows on your Mac then see the following:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows. You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

How to format external drive for mac AND pc use

hi
i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

There are a couple of disadvantages with formatting a
disk as FAT32. Firstly, there is a limit on the file
size for FAT32. I think it like 2 GB so if you
capturing video the results will probably not fit
into this file limit. Secondly FAT32 will not be
bootable. I alway clone my system to a backup disk as
bootable. That way if anything goes wrong with my
system, I can just boot from my backup disk and fix
it.
The problem with doing this though is that the drive will not be usable with Windows (which was in the original posting) unless you use the third party MacDrive software on the PC.
iFelix

In using MS Word for mac, and using track changes, and I send a copy, the recipient cannot see the track changes, nor do they show up on the printed copies, even though I highlight show changes in print

In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

I just bought a macbook pro and am ready to order Microsoft Office for Mac. I use Windows 2007 at work and want to be sure I am able to work with files from that system. Do I need to buy 2 different editions of Microsoft Office to be able to do this?

Do I need to buy 2 different Microsoft Office products if I want to be able to use my new Mac with Microsoft Office for Mac and also use files saved on my work computer which uses Microsoft Window 2007?

Pomme4us wrote:
Do I need to buy 2 different Microsoft Office products if I want to be able to use my new Mac with Microsoft Office for Mac and also use files saved on my work computer which uses Microsoft Window 2007?
Sorry, but your likely going to have to use Windows 7 and Office on your Mac at work using Bootcamp.
Although you can share files OfficeMac and Office on Windows, the formatting will be off because two platforms use different installed fonts and formatting. This will cause a productivity lost and require extra editing at work
If you could share just PDF's then your fine, but that will unlikely be the case.
So to share files seamlessly your going to have to install Windows 7 (another $300) full version, 64 bit, using Apple's Bootcamp.
https://www.apple.com/support/bootcamp/
It's ok, though, you can boot into OS X to use that online and surfing etc at home. It's the internet and sharing of files from other Windows users that cause Windows to hoze up, so mimimalize both of those and you should be fine.
You can also run Windows 7 in a virtual machine software like Parallels or VMFusion. as long as you don't have any super demanding needs of the hardware, like running 3D games or super intense CPU actions like video processing. Office work is just fine and it's safer than Bootcamp, as in a virtual machine you can keep "snapshots" of previous states of the OS, and revert back to in case something goes wrong in mere seconds.
A real good piece of news though, Windows 8 is so radically changed from Windows 7, that your workplace will remain with Windows 7 as long as possible to put off all the retraining necessary with that new OS version.
So think of the $300 + $60 investment in Windows on your Mac as a longterm thing.

Before I transfer files from my PC to the new imac should I load office for Mac and parallees? Will this mean I have to open the new account on my imac first and thus have two user accounts when I transfer the PC? I would prefer to only have one account.

IIt was in my mind to load office then transfer. After to load paralels and transfer my windows system. I have a new copy of office for Mac plus paralels PC to Mac transfer version 8. As this is my first mac (I have ipads and iphones) I am unsure of what to do. Also to confuse matters I use a windows laptop as my sync machine for the phones and ipads (i do have a cloud account with backup) can I transfer both machines to my new imac? I will have a 1tb fusion drive + 2tb time capsule although I only have less than 400GB of data on both machines. Hope this is not too confusing for everyone but I am looking forward to sorting this mess out by just using the one machine.

Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

Format a Western Digital Elements for MAC and PC

I have a new Western Digital Elements and I need to format it for Mac and PC. I have a G-Tech drive (which has content from an FCP edit) and I need to make a duplicate of the content onto the Western Digital so that the client who has a PC can open the files.
Any help? I tried searching in Disk Utility for FAT-32 but couldn't find it and didn't want to do something to harm the drive.
Thanks!

I have numerous external drives all formatted as FAT 32 on the Mac which transfer Quicktime back and forth between Windows and Mac machines.
As an additional note, check that the CODEC used for these files is available on the PC or they wont play.
We encode our client previews as H264 for playback only.
Applications > Utilities > Disk Utility > Partition >
in volume scheme select 1 partition
format: MS DOS FAT
options > Master Boot Record
apply and it will partition and format the drive

How do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled.

How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

How do I convert my Windows 7 Folder to an ISO image to burn to my USB Flash drive (16GB) in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

Sorry - confusing - My question has NOT been solved yet - can anyone help?

Can I use the same serial number for mac and pc?

My problem is that my mac is falling apart and I don't know how long it's still working - can be hours or can be months. I'm not sure if my next computer is mac or PC, so I'd like to know if the same serial number can be used with both mac and PC? I have understod that I can delete the program from my old computer and then use the same serial number in my next computer (Is it working that way?). So if I now buy a lisence for mac, can I use the same lisence later with PC?

Riisar for retail copies of the software you would need to complete the process detailed in Order an Adobe product platform swap or language swap.

Keeping Gmail email addresss and using Outlook 2011 for Mac and Exchange

Hi,
we use gmail for email at present with Outlook on a Mac. Having found that contacts and calendars cannot be synched between Oulook for Mac and Gmail I want to use exchange as a means of getting this sync working between my iPhne, iPad and OSX calendar and
contacts.
We actually want to continue with our gmail addresses (because it's too painful to change to anything else). I understand that gmail can forward messages to Exchange and presumably to be read in Outlook for Mac. How do we use Outlook for Mac and Exchange
to send emails such that they are sent using our gmail email address.
I.e people are not aware of what is going on in the background - they sent to our gmail address and receive a reply from the gmail address
Many thanks
Mike

Good luck with that.
You're not going to like this answer, but you should let Exchange be your e-mail system. Move off Gmail to Exchange on-premises or Online.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

I have downloaded MAMP for Mac and want to use it for working with Wordpress. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!

I have downloaded MAMP for Mac and want to use it for working with Wordpress. I'm on an Imac with Maverick OS 10.9. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!

It depends on how you installed it. You have to shutdown the MySQL service first. If you used the standard, but obsolete Startup Item, you can do that with the Startup Item. If you created a launchd script, you can do it with launchctl. Once MySQL is no longer running, you can delete the Startup Item or launchd script and the rest of MySQL.

Western HD - for Mac and PC use

Similar Messages

Maybe you are looking for