Wet iBook G4 and flashing question mark

Hi there!:)
I have a 12" iBook G4 with Panther. Yesterday accidentally it got soaked due to a flooding...
I've opened it and dryed it..
Today I see a flashing question mark when I start the Mac.
I've started up from the system software CD.
From the Apple menu I've choosen Disk Utility, but there were no hd seen...but the disk utility could see the external hd.
I've tried to reset the parameter RAM (PRAM), but nothing changed.
I've done the Apple Hardware Test and the result was that all is ok.
I've tried to install the system on an external hd but, in the pane where you select the destination disk, there were no disk seen,no internal and no external (even if connected).
Is this only an hd problem?Or something else?
Can I solve it by changing the hd?
Thanky so much for your help in advance!

Unfortunately, that external drive won't help you, even if you install OS X on it. An iBook can't boot from USB. Additionally, the drive needs to be formatted using the APM partition scheme as Mac OS Extended (journaled).
If you're game for tearing down your computer once more, pick up an external enclosure that uses Firewire (you can get them at http://www.macsales.com), remove the drive from the computer and place it in the enclosure, then see if the computer can see it. If not, the drive is dead and needs to be replaced.
~Lyssa

Similar Messages

  • Hi guys, problem with grey screen and flashing question mark. on top of it while in utility, i'm unable to verify, verify disc permission or repair disc0 which is obviously my main hd. any ideas where to go from here? tried to reistall osx but no luck.

    hi guys, problem with grey screen and flashing question mark. should be straight forward affair but on top of it while in disc utility, i'm unable to verify, verify disc permission, repair or even erase disc0 which is obviously my main hd. any ideas where to go from here? tried to reinstall osx but no luck, stucked when asked to chose location to install osx. would really apreciate any kind of help with this cause i'm quite new mac user. ty

    If you don't have a backup, read this:
    https://discussions.apple.com/docs/DOC-1689

  • Folder with face and flashing question mark, what to do when this happens?

    I'm sure this has been asked a million times, please help, my brother has a ibook G4, OSX 10.3.9, about 3 years old and now when he turns on the ibook it has a folder with a face in it and a flashing question mark. Do you just leave it and it will sort it self out or is there something to do to make it go away? Any help will be appreciated. Thanks

    I have replaced a 40 G harddrive with a seagate 160 G drive. When I try to start it it only comes up with the flashing question mark. I have tried to boot off the install CD, but it only flashes the question mark. This is my daughters computer and she really needs it to work for school.
    I have tried to "restore" using my new Mac Book and the old 40 G drive in an external USB case. But still is no good. I have used DiskWarrior and the drive will boot.
    This is an ibook G4 running 10.4.2

  • Installed new hard drive and flashing question mark appears

    I bought a new hard drive for my macbook pro (mid 2009) because my original harddrive bit the dust... I purchased it off of amazon which states that its specifically for macbooks and the reviews appeared to back it up. I saw a lot of people with great reviews of the same model of macbook that I have so I figured it was the best solution.. I connected the new hard drive but I am getting the dreaded flashing folder/question mark. Is this normal before re-installing the OS x? Heres the problem, I am out of town on business and do not have the original OSx disc on hand. So my question is, is the flashing question mark normal upon installing a new harddrive? and if so, is there away to install the OSx onto the new harddrive without the disc?
    my macbook was running mavericks before the harddrive went to poo, however I did try to re-install mavericks before i ultimately realized that I needed to new harddrive. I noticed that rebooting my mac with command+r would give me the option to reinstall mavericks without a disc or anything. the next question I have is, would this still be do-able on the new harddrive? I tried the command+R option on the new harddrive but nothing happens.
    Can someone help me out here, I am getting a little desperate as I have gone over a week without my mac and theres so crucial things I need to get done! Luckily I have all my stuff backed up on an external hard drive, I just need to get the mac running again. Thanks for taking time to read!

    1. Yes, it is normal. If there's no OS on the drive, there's nothing to take the computer past that point.
    2. No, there's no way on that Mac model. You need to use an existing system(see #4).
    3. Not on that Mac model; it doesn't have the Internet Recovery system, and there isn't a recovery partition on the new drive.
    4. If the backup drive contains a bootable clone of any compatible OS, or a Time Machine backup created from Mac OS X 10.8 or newer, connect it and restart the computer with the Option key held down. If it doesn't contain either, you can't.
    (105476)

  • Why won't my MacBook Pro start up? White screen and flashing question mark.

    Hi,
    I've had my MacBook Pro for almost 2 years now and I installed OS X 10.8 about 4 months ago.
    Today I turned the MacBook Pro on and a white screen with a flashing question mark appeared. I tried then getting the startup manager up: turning on the laptop and immediately holding in alt (option). But nothing appeared for about 25 seconds until a rotating Earth labelled 'Internet recovery' appeared that gave me options to join wireless connections. However, my internet wasn't in the options and when I tried typing in the information required to join my internet the laptop would just load and never find it.
    I then tried putting in my Mac OS X install DVD (10.6.7) and help in C until the apple logo appeared on the screen and the little rotating loading circle appeared. That then disappeared and a cicle with a cross through it appeared (similar to a no entry sign). Then after about 30 seconds a blue screen followed by a grey screen appeared until eventually the disc ran properly. I then went into Disk Utility but there was no option called Macintosh HD, only the discs content. It wouldn't let me first aid, erase or repair anything.
    I'm totally stumped and have 4 exams at university within the next 2 weeks. I'd really appreciate it if anyone could help me out here?
    Thanks,
    Best wishes,
    Connor

    The support article linked below is somewhat outdated. Where it refers to starting up from an installation disc, you should instead start up in Recovery by holding down the key combination command-R at the chime. Release the keys when you see a gray screen with a spinning dial.
    If you don't have a current backup of all the data on the startup volume, and you want to preserve that data, then you must try to back up before you do anything else. Ask for instructions if you need them.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to reinstall OS X from Recovery, if necessary. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    A flashing question mark appears when you start your Mac

  • On start up my mac is showing a folder and flashing question mark sign?

    On start up my mac shows a folder sign & flashing question mark?? Help and Why??

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
    Boot From The Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Assistance with Disk Warrior and Flashing Question Mark

    Hello, guys!
    I need a help. My computer was not booting and kept flashing question mark. I've tried First Aid, didn't help. Then I've checked with Apple store technicians, after all they reccommentd me to run Disk Warrior v.4. I did, but it couldn't create a directory for the files. What does it mean? What would be next step?
    Thank you very much for any advice.
    Message was edited by: Host

    Hi, Olimpia. If your hard drive's directory is very, very badly damaged, DiskWarrior may not be able to reconstruct it. Did you see an error message in Diskwarrior that said something like that? If so, you have no choice but to use something like Data Rescue II to recover what files it can, and then erase and zero the hard drive and start over.
    If you didn't see any error message, but Diskwarrior seemed to be taking a very long time and didn't appear to be doing anything, it was probably still working and just needed time and patience. I've seen several reports of Diskwarrior successfully rebuilding badly damaged directories but taking several days to do it, and one instance when it successfully completed a rebuild after *14 days* of continuous work. If it doesn't show any error message, just let it keep on working.

  • Clicking sound and flashing question mark folder

    This morning I started getting a repetitive clicking sound from the left of the machine. I wasn't using it at the time.
    This stopped, and I tried closing apps: got the spinning beach ball. Let it run for a while, then tried force quit, which didn't work - the "Force Quit" window didn't appear. So, did a power off by pressing the power button.
    At start up got a gray screen, the clicking noise, and then the folder icon with flashing question mark. Tried another start, got the chimes and blue screen and the clicking noise this time, then the gray and question mark.
    My guess is I've got a bad hard drive: should I keep trying to start up so I can try to back up if I get a good start (last backed up a week ago) or is it doing more damage to keep trying?
    Is it worth trying to run Disk First Aid or Tech Tool since it seems to be hardware related?

    If it's clicking, it's probably failing. Try things in Apple doc.#58042 on Flashing? mark.
    If the drive still spins, You could try the free demo of DataRescuell .
    If the demo "sees" your stuff, you can purchase the full version to rescue the bigger files. Don't use the drive, till you get this program, if the demo works. Best chance of recovery. Otherwise Data Rescue companies will charge you a fortune! Everyone needs to have at least one backup of their system.
    Cheers! DALE

  • Imac G5 won't start white screen and flashing question mark

    tried every key combo recomended -   erased HD using target mode/firewire with laptop - but won't boot up from install disc...

    The white screen with flashing question mark means that it cannot find a bootable volume.
    The iMac G5 will not boot from just any install disk. Ideally, use the grey restore disks which came with the computer. If you've lost these, you can order them direct from Apple. Alternatively, a Mac OS X 10.5 retail install DVD will work provided the iMac G5 has also 1GB RAM (minimum requirement for 10.5).
    Sometimes, if the internal drive is faulty, it can take a long time for the computer to recognise other disks. I would suggest holding down the option key on the keyboard (labled alt on some keyboards) and turning the computer on, keep holding alt until you get to the early boot menu, insert your DVD/CD, and click the circle arrow to refresh, wait a bit and the DVD/CD will show up and you can click on it to select it and boot from it by pressing the straight arrow.
    After a little while it will get to the install menu, select your language, then on the next screen go through the menus to find "Disk Utility" (it's in different places on different versions of Mac OS X).
    You will want to check that the internal hard drive is detected, and that it doesn't have a SMART error (it might be red, or say that the disk is failing). If you get that far, then (assuming you have erased the disk previously, as this will step really will erase the drive and take all your data with it) partition the drive, making sure that under 'Options' you select Apple Partition Map (this will be the default on earlier versions of Mac OS X, but might not be if you've erase the disk from an intel Mac like a MacBook).
    Once, you done all that, and there haven't been any issues, you should be able to quit Disk Utility, and carry on with the sytem install as usual, and a 30mins to 2 hours and reboot later you should be booting from the internal drive again.

  • Flashing Question Mark on Boot-Up

    Any help would be greatly appreciated with a problem I am having.
    I have a Mid 2009 2009 MacBook Pro that is showing a flashing question mark against a grey background when I try and start it up.
    If i remove the HDD and place it in a USB caddy the system boots and runs just fine but the same drive does not appear in the list of bootable drives (in fact no drives appear)
    I have tried with several known good HDDs from other Macs.
    I have tried resetting the NVRAM with Command-Option-P-R but each time the same grey screen and flashing question mark remains - no options appear.
    I have tried to resting PRAM via Terminal - refuses to recognise command.
    I have removed hardware password using System disk.
    I have pulled my hair out.
    None of the above have worked.
    Does anyone have any clues as to anything else I can try?
    Many thanks.

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
    Boot From The Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Gray screen with flashing question mark inside a folder icon

    Screen was unresponsive, cursor would move, but nothing else. Turned power off, turned power back on, now has a gray screen with a folder icon and flashing question mark in it. any ideas to correct or should i take it to Best Buy for service ( Geek squad) ?

    Before taking it in for service, I'd folllow this article. Although it's possible it's a drive issue, it's equally likely to be something else. That article walks you through steps to fix it if it's not the drive.
    Note: For the archive & install, if you're on 10.6, follow the disk instructions, if you're on 10.7 or later, you'll want to boot into the recovery partition. To do that, just boot the computer while holding down the Command+R button. No need for disks.
    Regards,
    Gnomish8

  • I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

    Which iBook do you have?
    http://support.apple.com/kb/HT1772?viewlocale=en_US
    Which version of the OS is installed, and which version are you trying to install?
    You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

  • I got this flashing question mark, i did some research into this and found out that the hard drive is the cause

    i recently found my ibook and decided to see if it would still turn on. it did but i got this flashing question mark, i did some research into this and found out that the hard drive is the cause. so i opened it up replaced the hard drive and closed it up, booted from the disc and crossed my fingers but it did not pick up the hard drive. i thought it might not have been installed properly, so i opened it up to check the connections to make shure they were secure and closed it back up but now it wont even boot from the disc. so dose anyone know whats wrong with it because i really don't just want throw it away if its a simple fix. please if anyone know i would greatly appreciate it.
    <Re-Titled By Host>

    There often were more than one build of Apple computer per model number designation...
    In the instance of iBook (white dualUSB) there appear to be two with number A-1007.
    And both of these were 14-inch display models.
    •iBook G3/800 14-Inch (32 VRAM - Tr) 800 MHz PowerPC 750fx (G3)
    •iBook G3/900 14-Inch (Early 2003 - Op) 900 MHz PowerPC 750fx (G3)
    •Apple iBook Specs (All iBook Technical Specs) for entire series - everymac:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    There are a few fairly good repair guides online, some on http://iFixit.com site.
    Here's the link to the early iBook G3 series, includes color + white dualUSB.
    If your iBook is a 14-inch G3 white dualUSB model that one is there, too:
    •iBook G3 Repair guides - iFixit:
    https://www.ifixit.com/Device/iBook_G3
    Either of these may be able to run a system no later than OS X Tiger 10.4.11.
    So a system install disc set could be used to troubleshoot, install, restore &
    prepare a replacement hard drive for a new system.
    Not certain what the issues are behind your situation, there may be more than
    meets the eye. Some models of iBook were more prone to hardware problems
    and as they age, fewer opportunities to affordably repair them exist.
    Good luck in resolving the iBook G3 issues...!

  • IBook G3 flashing question mark/won't boot from disc

    I recently bought a used iBook, and I knew that the hard drive was bad. No big deal, just replace the HD and reinstall OS X, right? Not quite. I'm still getting the flashing question mark, and the CD won't boot. I reset the PRAM, etc. Still nothing. Held down alt/option at start up. It recognizes that the OS X disc is there, but still won't boot it. It just shows me a smiling computer with a spinning rainbow CD looking thing in the upper left corner. At this point I'm thinking it might be a failed optical drive, or the ribbon might not be seated properly (Entirely possible, since the retard that owned this before obviously took it apart at least once. Half of the screws are missing). Am I correct in this assumption, or is there something else I should be looking for?
    Edit: I have 256MB of RAM, a combo drive, and am using a 10.1.3 disc.
    Message was edited by: InVenereVeritas

    Well, that iMac has a G3 processor and I see it's running OS X, so if you can get the iBook working, that is about what you can expect from it.
    There was a later G4 processor (in iBooks and iMacs), and the end of the PowerPC iMacs had a G5 processor in them, but that processor ran too hot for a portable — a main consideration in Apple's decision to switch to Intel processors.
    Surfing the web may be a trifle difficult with it, depending somewhat on the speed of your internet connection.
    The MacBooks are a phenomenal improvement over the iBooks (even the iBook G4). There's no way around it — the Intel processors are just so much faster. I wince a bit when I hear someone say they're basing a future purchase decision on the performance of such an old model as this. It's simply not an accurate representation of what modern Macs are like.
    Comparing Mac OS X 10.2.4 to Mac OS X 10.6.7 is a bit like comparing Windows 98 to Windows 7.

  • I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    I have a PowerMac G4 running ProTools that no longer boots up.  All I get is a file folder on the screen with a flashing question mark in it.  Ran the Utility disk and all systems passed.  Any ideas?

    You need to use the computer's install disks to repair the hard drive or install a new OS.
    (58033)

Maybe you are looking for