WET54G v3.1 Will not accept the default password for web setup
The setup:
1 2WIRE wireless router for AT&T DSL connection
1 wireless laptop, online and good to go
1 desktop, too far from router to connect with an ethernet cable, this computer does not have wi-fi
1 new WET54G v3.1, trying to setup as a wireless-ethernet bridge to get the wired desktop on the network and online
I have set up the desktop with static IP: 192.168.1.1; Subnet 255.255.255.0; Gateway 192.168.1.226. The WET54G is directly connected to the desktop. I open Internet Explorer and go to 192.168.1.226. After entering the password "admin" and leaving the username blank, the login prompt simply reappears as if the password is incorrect. I have reset the WET54G to factory defaults numerous times (held the reset button for over 30 seconds). It simply will not accept the password.
Any suggestions? I tried live chat but the chat window was so slow and buggy that both times it seemed we were about to make progress the window would freeze up or refresh entirely and disconnect me. Extremely frustrating to say the least.
Thanks,
Sean
Hi brickmonkey,
Sorry for taking so long to get back on this. We left for a long vacation and I got ridiculously busy when we got back. ANyway I just spent some time working on this and wanted to report back. Still didn't get it to work.
Got into the 2Wire and wrote down it's settings:
Router Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Default Gateway: (???) I did not see this under the summary page, but it was on the internet connection details page., it's a 151.x.x.x number, which the WET54G was not happy to accept as the default gateway. It gave me the error "DUT and Gateway cannot locate in different subnet." Also, on that internet connection details page, an additional subnet mask of 255.255.255.255 was listed, but I'm guessing 255.255.255.0 is the correct one to use, right?
Because it wouldn't accept that 151.x.x.x address, I can't get any farther. I did notice when setting up the SSID and security to match that of the 2WIRE, the channel was fixed at 6 and the dropdown was disabled. I changed the 2WIRE from 1 to 6 in case that was an issue. The WET54G is in Infrastructure mode, as the guide you linked to indicated.
Any thoughts with this new info?
Thanks again for your help with this,
Sean
Similar Messages
-
My Macbook Pro is powering on in Safe Boot and will not accept the correct password
My Macbook Pro is only powering on in Safe Boot and will not accept the correct password. What do I do to get it out of Safe Mode?
MBP = Macbook Pro (My shorthand)
I think I now understand what you are describing. This is the Apple support article on a Safe Boot:
http://support.apple.com/kb/HT1564
Note this excerpt:
How are you starting your MBP. Do you see a progress bar on startup?
Ciao. -
I have changed my icloud email in my iphone but in macbook still using old email. I tried to delete the old email in macbook but it requires password and it does not accept the old password for the old email anymore. How do I remove this old email?
Hello farahani hairon nizar,
If your Apple ID was changed from your old account, you may have to change it back to your old account to be able to sign out and then change it back after that is done. Take a look at the article below for more information.
If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/en-us/HT203828
Regards,
-Norm G. -
EA6350 not accept the default password "admin" no matter I reset the router device.
Hello,
I just brought a new router EA6350 and it does not accept the 'admin' to login the router. I did reset the router and can ping 192.168.1.1. Also able to go into the login screen. But the default password: admin was not success to login.
Please help
Solved!
Go to Solution.To isolate the issue:
Disconnect everything from the EA6350
Connect your computer to the EA6350 LAN Port
Make sure your computer wireless is disconnected or disabled
Connect to the router using this link http://192.168.1.1
If the router was reset to factory default you should be present a setup screen instead of a login screen
Info Link:
How can I reset the Linksys Smart Wi-Fi Router, EA6350 to factory defaults?
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
My iphone 5 will not accept the correct password ?
my iphone 5 will not log on to my company wifi even though the correct password is entered.all my other apple products have no issues with this function.Any suggestions
this is what worked for me i tried everything and even installed a new router, same thing doesnt connect even to the new router with a new ssid name, back up the phone, and restore it like new when you got it, and now the WI-FI works!!!, ive even try reset network that does not work at all, so best to restore the phone, i know it may be a hassle, but this seems like the only remedy, hope this helps.
-
I am not able to recover my keychain access. I followed the directions to "Reset My Default Keychain" and then entered a new password. It will not accept a new password. How do I Reset or recover the KeyChain Access Password?
This is what you tried?
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544
Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631 -
My 3GS will not accept my correct password and user name to start using the Cloud. It just spins while "verifying." How can I make it stop so I can activate iCloud ?
try using @me.com instead of your service address, i mean hotmail or yahoo or else, thanks.
-
I was trying to add and app to my iphone and was not able to do so. It wanted updated credit information. So, I entered it and it will not accept the month of experation. I have shut the phone down, sync it to the computer to update. Will not work. What can I do to continue?
Off the top I dont thing its good practice to post an email address here
I dont see how a google password change would impact on ur Apple ID/iTunes account
Have u access to the old email address? If not and you fail the apple security process then you need to call them
Have u tried to manage ur apple id from : appleid.apple.com -
we have 2 itouchs, we a separate itunes account for each one. We have one home computer to use them both on for sync and icloud, the icloud will not accept the 2 accounts?
Do you know what happens if you delete the icloud account from an iphone 4s? Will it delete the pictures, documents, etc. from the phone, or just unlink the icloud from the phone? I want to associate a different icloud account to the phone.
-
My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.
Hello buddyacw
You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I am trying to change the color of a background layer and it will not accept the color I want
I am trying to change the color of a background layer and it will not accept the color I want
If you want to get help you may have to provide a lot more details about what you are doing (which tools or commands do you use, what exactly happens when it fails, …)?
-
I have installed Adobe Creative Suite 5 Master Collection on a 2nd computer but now it will not accept the seriall. What can I do? I'm using a fresh install of windows 8.1
What exactly means "will not accept"?
-
I'm having problems uploading video taken with my iPhone 4 to Photobucket. FB will not accept the file extension which is ex. IMG_423. They will play on my computer and will upload to Facebook. Why is the phone taking video with this file instead of something like .mov or mp4. How can I change the extension after the fact and avoid it in the future?
You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.
-
I purchased a new computer and also Adobe acrobat XI Pro. It has not worked properly. I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number. What can I do?
Hi,
Have you tried the help documents below:
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error
In case of any other error message, please specify.
Regards,
Sheena -
I just updated to XI, but it will not accept the serial number
Hi there
If you have purchased an Acrobat XI upgrade you will be prompted to enter the Acrobat XI serial number first then the serial number for the prior version.
Which serial number isn't being accepted? Please provide more details and send me a private message with both serial numbers so I can check further.
Thanks
Bev
Maybe you are looking for
-
Hi, Is there any way to display Internal table values as output in SAP Query. I need to develop a query (sq01) which need to dispaly all the sales summary in single line based on customer, means need to do sum of all customer sales for a particular
-
Which partitions can i safely delete in win 8.1 on g510
I have amended the post as i wrote folders and I meant partitions. which partitions can I safely delete, I am not interested in onekey as I have added a smaller ssd drive. I am not sure if any boot details are hidden anywhere.
-
NTSC switches to PAL in clamshell
When connected to a TV via RCA out to TV from MacBook the MacBook switches to PAL every time I close the MacBook. Very frustrating. I have tried rebooting with the tv connected and closing the MacBook immediately. This used to work on my old iBook G4
-
Function to compare 2 expressions
Can you please any one give the expression to be used in sql to find out the small value in the 2 expressions given.
-
How to deploy app level JMS resource using DeployerRuntime?
I have an app level (described in the app, not global) JMS module. And inside this module I have several different resources. Here is my question: when using weblogic.management.deploy.DeployerRuntime (or WLST) what syntax should I use in c