WF error sending notification to org unit

Hi All,
I'm facing an amazing issue :
I use my WF to send notification. The recipient can be a single user or an org unit(object O, in this case all people belonging to this org unit receive the notification in theur SBWP). It was running very fine before but newly my WF goes on error if the recipient is an org unit. I checked my structure, there is no issue, people are well assigned and have their users defined in the system.
Could you please tell me what's the root cause of this issue? Is there a configuration of WF or rules I should verify?
Many Thanks

here is the last news, My WF runs correctly for another org unit. I went to the detailed log(transaction SWi2_freq) and found that for the container of my task(sending notification to the org unit ) some values of the structure "_Workitem" are diffrents :
Field "callbackFM" which value is SWP_CALLBACK_WI_DONE for both WFs
Field "return value" :
the WF which ran correctly : 0000
the WF which went on error : 1001
So I guess that this FM causes the error, but I can't find this FM with transaction SE37
How to reach it?
Have you faced this error before?
A colleague audited the OM structure, he confirmed that it's well set up, and the error is not due to wrong assignements or invalid dates.

Similar Messages

HCM-ORG MANAGMENT Config error, in creation of Org Units.

Hi Experts,
I am trying to configure the HCM-Organization Management in ECC 6.0, When I try to maintain an Org Unit, the system prompts with an Information Message as stated below, since it was an information message, i continued creating the Org Unit, but when I am trying to save the entry, Now system shows me the same message and doesnt allow me save the entry and prompts me with same message...
No evaluation path specified for structural evaluation
Message no. 5A249
Diagnosis
You want to start structural reporting, but you have not specified an evaluation path according to table T778A.
Can any of you help me in this regard.
Best Regards,
KishoreJ.

Hi Amosha,
When i try to do it through the expert mode..The following error shows in the task bar
For infotype 1000 in status 4, function INSE is not allowed
Message no. 5A043
Best Regards,
KishoreJ.

Error while asssignment of Org unit to cost centre.

HI Frdz,
When I am traying to assign org unit to cost centre I got this error CALL_METHOD_NOT_IMPLEMENTED.
Experts pls let me know how to solve this error.
I maintained A\001 relation for cited above.
Thanks in advance.
Best regards,
Narayana Kaja

Check the table T77S0
When you create relationships between cost centers and positions or
organizational units in Organizational Management, the system requires
that the cost center is assigned to a controlling area, as a cost center
must always be assigned to a particular controlling area. In this case,
the value of this entry will be used as the default for the controlling
area.
Let me know if you need more information.
Thanks,
Kiran.
Reward points are appreciated.

Error when accessing the "Org unit" link from iview "Who's who"

Hi all,
In our ESS/MSS implementation we have come across to a strange error:
In the master iview u201CWhou2019s whou201D when trying to access the link for the org unit we receive the following error:
Service EMPLOYEE_ORGCHART_SERVICE does not exist.
Indeed the respective service does not exists nor the resources. We have ECC 5.0 and EP 7.0. We were unable so far to find the right (or dedicated) resources/services for this.
Any helps are much appreciated.
Thanks,
Eugen

Hi Eugen,
Probably these threads can help you.
Error "Service EMPLOYEE_ORGCHART_SERVICE does not exist." in ESS.
ESS Who's Who - remove link from Org Unit
Good Luck!
Sandeep Tudumu

Send mail by org unit

Hi friends.
I have saw some posts about this, but I can't understand configuration details.
How to link org unit to a send mail task step by step ?
Is that necessary to configure anything with BASIS team ?
Thanks.
Glauco

Hi Rick.
In reality, CO functional asked me to develope this WF to send only a mail, when an account is created in FS00 transaction, to everyone in org. unit of Controlling (and below structures of it). No need of workplace message nor work item.
Once structure code of Org. Unit. can be different between development, quality and production, I create a "general" parameter table maintained by SM30, that we can put the correct code of Org. Unit in each system. So, when WF starts, there is a Z method that get this Org. Unit code and fill in a variable begining with a "O". This same variable, I put in mail step.
Did you understand ?
thanks.
Glauco

The bp id for org unit does not exist

Dear expert,
after transport the org structure from dev to qty system , we found the bp id for org unit does not exist in qty system.
in ppoma_crm, we can see there is a bp id assigned to the org unit. however, when use tcode 'bp' to check the bp id, the system can not fould a valid id.
what can we do to solve the issue?
will there any impact if we keep no bp id for the org unit?

Hi,
You can use the transaction CRM_OM_BP_INTEGRATE.
Select the Org unit and enter the org id in the input field and execute it.
Select the org unit from the result list and click on the button Start Repair. This will create a BP without errors for the respective org unit.
Regards,
PP

Workflow - Notification to a Position in Org Unit

Hi,
I have a requirement to Send a Notification to an authorized person in the ORG Unit.This Task is a background task which uses the BO SELFITEM and Method SENDTASKDESCRIPTION.
I can send the notification by passing a value thru address strings.How do i send the notification by selecting from Org Unit.I cannot use a rule as this task is a background task.Is there any FM to determine that authorized person from Org Unit .Or is there any other method to solve this issue.Thank you

Hi Swathi,
I am not clear with your question. Are you trying to get any person from an orgunit? Or Do you want to know the boss of an org unit and then send a notification?
These are couple of FMs that could help you...
HRCM_ORGUNIT_MANAGER_GET - manager of orgunit
HRCM_ORGUNIT_EMPLOYEE_LIST_GET - employees of orgunit
Cheers

Error : Sales Org.Unit does not have these attributes -- Urgent

Hi, Team,
I am unable to create a service order with serivce material ( Only installation visit charges ) for w/o warranty product .
I am getting error : " Sales Org.Unit does not have these attributes "
I had checked the related Org data of respective sales org , already the sales area combination is also maintained from R/3 with required attributes "
Pls revert with possible solution .
Regards,
VCS

PePe :
Thanks for reversion !!
Basically it is a product Service Material (Servicing Charges), where in I had checked in the transaction , Though the required sales area is well maintained in the R/3 System and is being replicated to the CRM .
When I checked the product Service material , the required comination is missing and could find other sales area combinations .
Pls guide , how to go to get this resolved .
Regards,
VCS

Exception: Could not send notifications due to Error

Hi experts...
I have configure the Notification Message function for the new task in UWL follow the guide below.
https://help.sap.com/saphelp_nwce711/helpdata/en/e4/32ff7865fa483dba3686160f5c6dd0/frameset.htm
It does work on the server (BPM/CE7.11) in my office. (CE install in VMware along with mail Server, use same IP: 8.8.2.180)
But when I do the same thing on client's side, it just doesn't work out. (use the same VM instance, but in different Network environment)
I list the detail info. of settings and exception below:
For BPM Mail Server Connectivity:
host: 8.8.2.180 (also try bpm.hjoy.com.tw)
user: jason
e-mailAddress: jason @demo.hjoy.com.tw
PSW: goodtry
For BPM Notification Messages Configuration:
Mark both option
URL: http://bpm.hjoy.com.tw:50000
Could not send notifications due to Error: (Failed in component: sap.com/tcbpemtmear, BC-BMT-BPM-DSK) Exception raised from invocation of public int com.sap.bpem.tm.notification.MailNotificationSender.startNotification(com.sap.bpem.tm.adapter.Action,com.sap.bpem.tm.ITaskInstance) throws java.lang.IllegalArgumentException method on bean instance com.sap.bpem.tm.notification.MailNotificationSender@1a44705 for bean sap.com/tcbpemtmearannotation|bpemtmejb.jarannotation|MailNotificationSender in application sap.com/tcbpemtmear.; nested exception is: javax.ejb.EJBTransactionRolledbackException: (Failed in component: sap.com/tcbpembaseear, BC-BMT-BPM-DSK) Exception raised from invocation of public void com.sap.bpem.base.mail.MailSenderBean.send(com.sap.bpem.base.mail.IMessage) throws com.sap.bpem.base.mail.MailException method on bean instance com.sap.bpem.base.mail.MailSenderBean@14d43e4 for bean sap.com/tcbpembaseear*annotation|bpembaseejb.jar*annotation|MailSenderBean in application sap.com/tcbpembaseear.; nested exception is: com.sap.bpem.base.mail.MailException: javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 554 User unknown
Please kindly help me for this...

Good day! I configured the notification but I stack with a problem.
There is an error in logs:
Could not send notifications due to Error: {...} nested exception is: com.sap.bpem.base.mail.MailException: com.sun.mail.smtp.SMTPSendFailedException: 550 authentication required
But I've entered the login and the password to the smtp. Where can I find a reason of the error?
Also I tried to configure notification service using the link http://help.sap.com/saphelp_nwce711/helpdata/EN/e4/32ff7865fa483dba3686160f5c6dd0/content.htm, but when I try to configure tcbpembase~ear service there is no edit button and the column "Modifiable" has no check. What it can be?

Org unit error !!!

Hi
I have a few questions and an org unit error when trying to process a quotation. Details below. If anyone can help, then that would be great.
"ORG UNIT (SALES) DOES NOT HAVE THESE ATTRIBUTES"
Org unit (sales) does not have these attributes
Message no. CRM_ORGMAN022
I have an org unit set up as follows
Root Org - Sales
Sales Org - Sales - Sale Organization
Sales Office - Sales - Sales Office
Sales Group - Sales - Sales Group
Org attributes for Division & Distribution Channel is a cobination called Tupel
In the organization tab it is shown as follows
Organization Unit - PLSG
Sales Organization - PLS
Distribution Channel - Z3
Sales Office - PLSO
Sales Group - PLSG
No Division ?
Why does org unit and Sales group have the same Code ?
I have pasted the diagnosis of the error but cannot determine from that where I have gone wrong.
Diagnosis
You have entered or changed an organizational unit in the "Organizational Unit (Sales)" field.
The attributes assigned to the entered organizational unit (sales) in the organizational model do not correspond with the data (sales organization, distribution channel, sales office, sales group, on the item level: division) in this document. Organizational data are inconsistent.
System Response
The system cannot continue to process the document. It cannot execute subsequent processes dependent on organizational data (for example, partner processing, pricing).
Procedure
You have the following options for solving this:
Enter an organizational unit with the appropriate attributes. Use the input help. You can check the attributes of organizational units in Organizational Model
Check the organizational model in CRM Customizing under Organizational Management -> Organizational Structure -> Change Organizational Structure. Change the attributes of the required organizational unit as required.
Regards
Avi

Hi Avinash,
goto TC : OOATTRCUST
Check the following for Sales Scenario
1. For Sales Scenario activate buffering
2. Select Attributes/Scenarios node and check for Attribute IS_SA_ORG is having inherit. Type as '0' and deactivate invisible
3. Remaining org.stru. attributes like IS_SA_GRP
N No inheritance
3 IS_SA_OFF
N No inheritance
2 IS_SA_ORG
N No inheritance
1 All should be activated for invisible(tick)
Run CRM_COM_ORGMAN_BUPA_INTEGRATE to update org.model.
To improve system performance, you can use the HRBCI_ATTRIBUTES_BUFFER_UPDATE(need to run after MW replication to clear the buffer) program for buffering organizational model and attributes. Call up view T77OMATTR via SM30 and select the buffering field for each scenario to buffer corresponding objects. Execute the HRBCI_ATTRIBUTES_BUFFER_UPDATE program every morning (after 0:00 hrs) before starting your systems
i hope it ll help u
Reward points if helpful
Cheers
Ranga

Org unit doesnt exist but I getting error by HRBCI_ATTRIBUTES_BUFFER_UPDATE

hi
Gurus, i have an issue with Org. Model, an Org Model was created and transfered from customizing box to testing box, then one error was issued when running HRBCI_ATTRIBUTES_BUFFER_UPDATE report: "missing COUNTRY for xxxx org unit". then I checked it in ppoma_crm and HRP1000 table to solve it, but it does not exist in the system, so my Org, Unit determination rules are not working due this error.
Has anyone gotten that error for that kind of ghost Org Unit, how can I figure it out??
Thanks in advance

You can set breakpoint at message -> get line in program there message appears and follow solve the problem.

How does workflow retrieve users under an org. unit when sending email

Dear All:
Workflow supports sending email activity where you can specify the receipt type and receipt ID. For example, the email is supposed to send to the users within an organizational unit.
I am just wondering how SAP workflow determines the users within an organizational unit? Does it use HR-ORG evaluation path to get objects under an org. unit?
Many Thanks in advance!
Haifeng

Hi,
For example, the email is supposed to send to the users
within an organizational unit.
Yes workflow template and standard task are also part of organizational unit. As you mentioned that the if the recipient type is choosen as Organizational Object then the workflow system will try to fetch the data from the organizational unit based on the recipient ID you provided in the mail step let say if you are using the recipient id as position Id then workflow system will try to get the data from the organizational unit
Org object types supported by the workflow system are US, C, S, O....
If at all the you choose the workflow recipient type as email address which can be a external address then in that case it just simply makes use of BCS communication methods and and in this case your SCOT settings must be configured properly.
The difference between the first and second is, in the first case the work items or mails/documents will be sent to sap inbox (SBWP) in the second case it depends on the mail ID you mention for example a outlook mail ID.
Regards
Pavan

Error " enter Org Unit sales"

Hi CRM SDNers,
In a servicer transaction the responsible org determination is carried automatically (a pop-up for selection) and later I changed the determined org unit manually to XYZ.. this is showing an error that the Item level "enter org unit sales".
We dont use any sales organization in our application. Please sugget / guide how to resolve this error.
Regards,
Fedor.

Hi
Provide the same details.
Create org. and other in tcode :BP.
Cheers
Deepanshu

Org Unit Number Range Error...

Hi,
Iam trying to maintain the Number Range for Org unit in the configuration.
I have maintained it like the below
$$$$     IN     EX
01C     IN     EX
01O     IN     EX
01S     IN     EX
I have also checked the Plan version which is '01'.
But when I create an Org unit, it takes the OU number from some where in the middle. It is not even taking from the below setting as well.
$$$$     IN     EX
Could you please throw some light on this ?
Thanks in Advance..
Regards
Vijay

I think you have posted the question in wrong forum , move this to SD

Org Unit as Distribution Point for Document Distribution

Hello Experts,
I would like to maintain a distribution point for the document distribution. Therefore i still have maintained the distribution point (it is an org unit) in the available communication types (INT, RML,..) in SPRO...->Document Distribution->Define Communication Type.
But now every time when a distribution package will be started for distribution I get an error message: "Function <senden> not possible". The package should be send via distribution type INT to the distribution point.
Perhaps the communication type INT is not maintained for the org unit yet?Where can i do this?
Regards,
Christian

Hi Christian
The distribution point under Type of distribution point and Distribution point is used under the following conditions:
1. If distribution is initiated manually and the Distribution immediately indicator was set without entering an explicit distribution point.
2. If distribution is initiated manually and the
Distribution immediately indicator was not set.
3. If distribution is initiated by an event.
If the "Send to distribution point" indicator is set and no distribution point is entered explicitly, the current user becomes the distribution point if distribution is initiated manually. If distribution is initiated by an event, the user that triggered the event becomes the distribution point.
Follow this Procedure.Also Check all the setting in Define Distributio Types for Distribution type INT
where you mention distribution Point details.You will have to explore alittle bit.
With Regards
Mangesh Pande

WF error sending notification to org unit

Similar Messages

Maybe you are looking for