WF mail's subject replaced by task name!

Hi all,
I'm facing a very annoying and urgent problem on ECC 6 about mail sent
via workflows.
In some cases the mail's subject (work item text) is replaced with the task
name (in SCOT) and if I access the workflow log everything is ok and the
subject is the one I decided in SWDD.
I never got this problem on the dev. system but in production it's appening daily.
Any help would be very appreciated.
Thanks in advance.
Angelo

Translation tools for workflow has improvement possibilities, yes...
I think if you already have the task in a request the translation will be transported, but I am not sure. Perhaps you have to manually include the translations.
There have been threads about translating before in this forum. I am sure a transaction for translating has been mentioned in those - I just can't remember what it is.

Similar Messages

Oracle forum watch : please send mail with subject as the question

Hi Site Administrator,
The oracle forum send a mail if we are watching any topic. Earlier the subject was named as the question subject , which was very helpful.
Now we are gettting the mail with subject as the topic name ex java programming, new to java etc.
With the current form we have to see inside each mail to know what is the question asked. Earlier from the subject itself we were able to find what is/may be the question. Which has helped to easily and quickly scan through. So please change this new pattern to old pattern. Since that is the best practice.
Hi moderator
Please put my question in the suitable section if it is not placed in the right one.

793619 wrote:
Hi moderator
Please put my question in the suitable section if it is not placed in the right one.Put it there yourself.
Community Feedback (No Product Questions)
The Java and Solaris moderators aka community moderators are not authorized to move content anywhere and everywhere on forums.oracle.com. In future, please check the forum listings and find the correct forum to post to.
I'm locking this thread and it will be removed later.
db

In Mailing, from subject as standard name

Hi all,
       I am sending mail in my program, where i need to set From subject as my company name.... How to achieve this
     In below screen shot in place of DEVELOPER company name 'XYZ' should come ..
please sujjest
Regards,
Lokesh.

Hi Lokesh,
Write below code, This will send from as [email protected] :
l_sender = cl_sapuser_bcs=>create( [email protected] ).
    CALL METHOD l_send_request->set_sender
      EXPORTING
        i_sender = l_sender.
is this the requirement? can you please elaborate.
Thanks,
Anil

Mail Notification Subject

Hi all,
We want to change the Notification of completition subject in workflow task .This comes as Notif of Completition : Workitem text .
Workitem text is something we write , but notif. of completition comes by default in every notification mail .
How can we change this subject text ?
Thanks,
Sahiba

No, you can't change the subject as standard but you can change the body of the message from Trx PFTC under Decription tab.
Regards, IA

Error generating report job with the task name 'FSRM_Report_Task

Since this morning we have been having a problem with FSRM on Windows Server 2008 R2, it is no longer running storage reports (both scheduled and on-demand).
We get the following in the event logs:
Log Name: Application
Source: SRMREPORTS
Date: 09/06/2014 08:09:55
Event ID: 752
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: FILESERVER2.curriculum.riddlesdown.local
Description:
Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SRMREPORTS" />
<EventID Qualifiers="0">752</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-09T07:09:55.000000000Z" />
<EventRecordID>42920</EventRecordID>
<Channel>Application</Channel>
<Computer>FILESERVER2.curriculum.riddlesdown.local</Computer>
<Security />
</System>
<EventData>
<Data>Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
</Data>
</EventData>
</Event>
We have uninstalled and reinstalled the FSRM role service but are still having the same problem.
Anybody have any ideas?

Hi,
From the error message, it failed because of "invalid argument: storagetype = '101' ".
101 means the storage type is "system" + "cache". Is there any change on your storage before the issue occurs? For example whether the source storage is changed?
FsrmStorageModuleType enumeration
http://msdn.microsoft.com/en-us/library/dd392346(v=vs.85).aspx
If you have any feedback on our support, please send to [email protected]

MS Project - can you merge from a spreadsheet/access database based on task names?

I'm wondering if it's possible to import data on certain tasks from a spreadsheet or access database. I know you can import tasks and append them, but I was hoping to:
- Match a task name with the task name on the spreadsheet/access database
- Update that task in MS project with information/fields in the spreadsheet/access database
Can this be done? Thanks.

Hi,
In regarding the issue, my understanding is that you want to use Excel spreadsheet as database for the Project.
I recommend you develop an import map that includes the key fields. Please refer to the link and do it step by step:
http://www.techrepublic.com/blog/tech-decision-maker/importing-a-vendors-excel-schedule-into-microsoft-project/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If I misunderstanding something, please let me know and upload some sample about the Excel spreadsheet.
Regards,
George Zhao
TechNet Community Support

Having been without my Mac for a month I've been using iCloud mail. The new mail boxes that I set up there do not automatically show up in Mail on my replacement Mac. Is there any way to transfer them from ICloud mail to Mail?

Having been without my Mac for a month I've been using iCloud mail.on a PC. The new mail boxes that I set up there do not automatically show up in Mail on my replacement Mac. Is there any way to transfer them from ICloud mail to Mail? Thanks.

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Mail and Address Book adding second name to contacts!?

Each time I recieve an email from, for example, my father, Mail and Address Book change his name to 'Dad Bramhall'. I specifically change it to 'Dad but whenever I sync. to my iPhone the address book entry changes to Dad Bramhall.
This is so frustrating so please does anyone know how to stop it adding/changing a name? Thanks.

I have tried editing his name on both my Mac and iPhone address book but it just changes to Dad Bramhall again. He has is name listed as Mark Bramhall and how do I change email preferences? Thanks.

Susbtitution Variables in rules file to replace a member name with another

Hi everybody,
Can I use substitution variables to replace a member name with another name in rules file?
Please let me know if we can use substitution vars.
Essbase version :11.1.2
Thanks,
K.as

Are you the same guy?
http://www.network54.com/Forum/58296/thread/1287447433/Susbtitution+Variables+in+rules+file+to+replace+a+member+name+with+another+name
The answer is still, "No".
Regards,
Cameron Lackpour

How to Determine Task Key based on Task Name?

Hi all, I'm trying to implement addProcessTaskInstance and I can't seem to dynamically obtain the task key. I want to find this based on the task name since this will be consistent through environments, but due to multiple development streams going on at once I can't be guaranteed that the task key will be the same in each in environment (i can be guaranteed it won't be actually). I'd rather not hard code the key in a variable in each environment if I can avoid it.
Thanks,
Ryan

Hi Ryan,
you could also use api to retrieve the task key.
          HashMap map = new HashMap();
          map.put("Process Definition.Tasks.Task Name", your_task_name);
          tcResultSet localtcResultSet = tcUtilityFactory.getUtility(tcDataProvider, "Thor.API.Operations.TaskDefinitionOperationsIntf").getTaskDetail(your_form_key, map);
          taskKey= localtcResultSet.getLongValue("Process Definition.Tasks.Key");
This would be slower than database query though.
Regards,
Ece

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does nog display my name or e mail address. This only since upgrading my iPhone5 to iOS7

When I send a mail from my iPhone, it displays the mail server name to the receiver if the mail and does not display my name or e mail address. This only since upgrading my iPhone5 to iOS7. I've checked all settings etc. anyone have a solution please?

Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution.

Task name appears instead of workitem text

Hi,
I have a dialog task. Whn I test the WF frm my system, I am getting the workitem text specified for the task in PFTC and its working fine. but when i test the same workflow in another system with the same user id & pwd, i am not getting the workitem text. Instead the task name is displayed in the inbox.
Any settings needs to be checked? Plz let me know.
Thanks,
Sivagami

Hi, thr was no translated text maintained for the workitem text .the prob is solved.

Task Name Field, "Blank" ("") in 2007, "Empty" (Empty) in 2010, HOW TO FILD/FILTER for empty?

In MS Project 2007, I can use VBA code in Excel and determine if the selected task “Name” field is blanks by using the code “pj.Activecell.text <> “”.
In MS Project 2010, blank name cells are no longer “” (or blank), they are “Empty”. How do users filter for a non-standard value of “empty” then the text of “empty” is not in the task “Name” cell?

Hi Dan,
Since I almost know nothing about VBA and I can only read but not write code, I'll let John or Rod (VBA kings on this forum) jump in.
But here is what I go recording the macro:
Sub Macro1()
SetAutoFilter FieldName:="Name", FilterType:=pjAutoFilterIn, Criteria1:=""
End Sub
Also ensure to have the latest version of Project 2010 since I noticed different behaviour with blank lines with 2 different versions.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How can I configure MA to display "speaking" OpCode and Task names

If you have a custom ETW Eventsource definition: PerfView reads and Displays from the etl files the OpCode and Task values not as integer but as defined in EventSource inner classe for Task and in the
System.Diagnostics.Tracing.EventOpCode. My question is, how can I configure the MA to display the values not as "magic numbers" or can MA get this feature?
Regards,
Alexander
Kind regards, Alexander

Hi Paul,
please take a look to the attached picture. I've tried to make a comparison between automatically behavior of PerfView and Message Analyzer by displaying of the same performance log. The Message Analyzer got metadata, generated with wevtutil. The related
part of the manifest is here:
<tasks>
<task name="ReadingFromGdb" value="1"/>
<task name="LogReadPreInvoke" value="65532"/>
</tasks>
<opcodes>
</opcodes>
<keywords>
<keyword name="Perf" message="$(string.keyword_Perf)" mask="0x8"/>
<keyword name="Gdb" message="$(string.keyword_Gdb)" mask="0x10"/>
</keywords>
<events>
<event value="8" version="0" level="win:Verbose" message="$(string.event_LogGdbReadPreInvoke)" keywords="Perf Gdb" opcode="win:Start" task="ReadingFromGdb" template="LogGdbReadPreInvokeArgs"/>
</events>
<templates>
<template tid="LogGdbReadPreInvokeArgs">
<data name="fullName" inType="win:UnicodeString"/>
<data name="methodName" inType="win:UnicodeString"/>
</template>
I hope, it helps you to understand details of my questions.
Regards,
Alexander
Kind regards, Alexander

How can I localize the text of process names, task names and user actions within a process?

I'm very interested in using the capabilities of Adobe LiveCycle Process Management for my project, however I have one rather large concern... I hope someone here can tell me whether there's a way to address it.
Since I work for the Government of Canada, I have to meet certain requirements relating to bilingualism of the user interface. It's my understanding that the Workspace portion of LiveCycle has already has support for French.
But what about the design of my processes? How can I display text to a user in the language of their choice when they're interacting with my processes? ... in particular, I'm thinking about the process name, task names, and user actions.
I hope that this is possible without too much pain. I imagine this must be a pretty common requirement!
Thanks in advance to all who respond.

You can completely change the content of whole pdf by using "renderPDFForm" operation under service "FormsService". in this operation there is Template category where you can set the Locale.
And if you need to change the other workspace options like Complete, Save as Draft , you can then import workspace ui project and then change apppropriate values.
Thanks,
Prashast

WF mail's subject replaced by task name!

Similar Messages

Maybe you are looking for