WF problem with rule

Hi expert,
i have created a rule with Category = Agent Determination: Responsabilities; this rule doesn't work correctly only in production and only with some values.
I have tried the note 855494 but i haven't understand what "The rule resolution is not working in case the container type is an ABAP Dictionnary Data Type." means; can you help me? It is urgent.
Thanks and regards.
Antonella

Hii Antonello,
U should post this query in <b>BPM and WORKFLOW</b> which is in SAP NETWEAVER.
There u will find the experts for WF.
Regards,
Ashish

Similar Messages

Problem with rules in mail.app

I've just started having a problem with my rules in mail.app that I just don't understand. I have several rules that I've had working for quite a while now, over a year. All of a sudden beginning about a month ago, some of them -- different ones at different times -- stop working and the incoming mail goes into my main mail box and don't get distributed according to the rules to the appropriate mail boxes.
When I check the rules, all of which are basically the same: If any of the following conditions are met, From contains XXX, Perform the following actions: Move message to mailbox xxx, I see that mailbox XXX has changed from what it should be to some other mailbox name which is a valid name but not the one that I originally put in the rule.
To make it a bit more strange, the rule with the wrong mailbox name is not executed and the mail winds up in my main mailbox.
When I edit the rule and change the mailbox name and am asked whether I want to apply the rule and I respond yes, the rule executed and the mail that landed in the main mailbox gets distributed the way it should.
But then anywhere from a day to a week later the same thing happens, that is, the mailbox name in the rule somehow gets changed again.
Has anyone seen this behavior before and/or have any suggestions for fixing it?

Are you really on 10.8.1 as per your profile - maybe updating to 10.8.3 might help.
Have you tried rebuilding the mailbox? It sometimes helps sort out Mail problems:
http://support.apple.com/kb/PH11811

Problem with rules after migration

After migration of some mailboxes from Exchange 2007 to 2010 we have a problem managing rules. When trying to create or look at rules from OWA we get an Mapi error (See below). Also, When checking the problem user rules from Exchange Management
Console "get-inboxrule -mailbox <User>", it fails with a Doctor Watson error (also below) Witch is similar to the one from OWA.
Any help would be much appreciated.
Mapi Error:
MapiExceptionNotFound: Unable to query table rows. (hr=0x8004010f, ec=-2147221233) Diagnostic context: Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=104] Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=1366][latency=15] Lid: 23226 --- ROP Parse Start --- Lid: 27962 ROP: ropGetRulesTable [63] Lid: 27962 ROP: ropSetColumns [18] Lid: 27962 ROP: ropQueryRows [21] Lid: 31418 --- ROP Parse Done --- Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=53] Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=168][latency=0] Lid: 23226 --- ROP Parse Start --- Lid: 27962 ROP: ropLtidFromId [67] Lid: 17082 ROP Error: 0x8004010F Lid: 17505 Lid: 21921 StoreEc: 0x8004010F Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid: 26426 ROP: ropLtidFromId [67] Lid: 43747 dwParam: 0x5 Lid: 55653 StoreEc: 0x8004010F Lid: 1750 ---- Remote Context End ---- Lid: 26849 Lid: 21817 ROP Failure: 0x8004010F Lid: 30894 Lid: 24750 StoreEc: 0x8004010F Lid: 29358 Lid: 27950 StoreEc: 0x8004010F Lid: 32190 Lid: 21950 StoreEc: 0x8004010F Lid: 27070 Lid: 22974 StoreEc: 0x8004010F Lid: 18686 Lid: 1136 StoreEc: 0x8004010F Lid: 24318 Lid: 32510 StoreEc: 0x8004010F
Doctor Watson:
WARNING: An unexpected error has occurred and a Watson dump is being generated: MapiExceptionNotFound: Unable to query
table rows. (hr=0x8004010f, ec=-2147221233)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=104]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=1366][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetRulesTable [63]
Lid: 27962 ROP: ropSetColumns [18]
Lid: 27962 ROP: ropQueryRows [21]
Lid: 31418 --- ROP Parse Done ---
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=53]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=168][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLtidFromId [67]
Lid: 17082 ROP Error: 0x8004010F
Lid: 17505
Lid: 21921 StoreEc: 0x8004010F
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLtidFromId [67]
Lid: 43747 dwParam: 0x5
Lid: 55653 StoreEc: 0x8004010F
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x8004010F
Lid: 30894
Lid: 24750 StoreEc: 0x8004010F
Lid: 29358
Lid: 27950 StoreEc: 0x8004010F
Lid: 32190
Lid: 21950 StoreEc: 0x8004010F
Lid: 27070
Lid: 22974 StoreEc: 0x8004010F
Lid: 18686
Lid: 1136 StoreEc: 0x8004010F
Lid: 24318
Lid: 32510 StoreEc: 0x8004010F
MapiExceptionNotFound: Unable to query table rows. (hr=0x8004010f, ec=-2147221233)
Diagnostic context:
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=104]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=1366][latency=15]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropGetRulesTable [63]
Lid: 27962 ROP: ropSetColumns [18]
Lid: 27962 ROP: ropQueryRows [21]
Lid: 31418 --- ROP Parse Done ---
Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=53]
Lid: 43559 EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=168][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropLtidFromId [67]
Lid: 17082 ROP Error: 0x8004010F
Lid: 17505
Lid: 21921 StoreEc: 0x8004010F
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropLtidFromId [67]
Lid: 43747 dwParam: 0x5
Lid: 55653 StoreEc: 0x8004010F
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x8004010F
Lid: 30894
Lid: 24750 StoreEc: 0x8004010F
Lid: 29358
Lid: 27950 StoreEc: 0x8004010F
Lid: 32190
Lid: 21950 StoreEc: 0x8004010F
Lid: 27070
Lid: 22974 StoreEc: 0x8004010F
Lid: 18686
Lid: 1136 StoreEc: 0x8004010F
Lid: 24318
Lid: 32510 StoreEc: 0x8004010F
+ CategoryInfo : NotSpecified: (:) [Get-InboxRule], MapiExceptionNotFound
+ FullyQualifiedErrorId : Microsoft.Mapi.MapiExceptionNotFound,Microsoft.Exchange.Management.RecipientTasks.GetInb
oxRule
-FireLite

Hi,FireLite,
What kind of the migration?
If it was cross forest or involved PST files then rules rarely come across correctly and should be recreated.
If it was simply install Exchange 2010 and use move mailbox, then rules should have moved with the mailbox.And please provide more information like below:
1)Does this rule problem happen to all moved mailboxes or just part of them?
2)Would you please verify that you have successfully moved these problem mailbox?
3)Can you manage the rule in outlook for them?Have you tried to create a new rule to see if it works for these mailbox in OWA or Outlook?
Please try to move the mailbox back to Exchange 2007,then move it to another mailstore,after that migrate it again to Exchange 2010 to see if it works.
And here are some resolved cases with similar error for your reference.
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/3c795b8f-0b60-4346-b8f1-eb8c4f9c9cb0
http://social.technet.microsoft.com/Forums/en/exchangesvradminlegacy/thread/3cf2360f-0a4c-4c7e-87c9-6726e3dc34fd
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Indesign CC problem with rules

I am used to work with paragraph rules when I have to to highlight text in documents.
Now, in InDesign CC, I have to deal with a strange problem – trying to select the characters in text, the selection is visible in another place. The characters, however, are indeed selected, but it can not be seen correctly.
Here is what I do step by step:
1. write a line of text
2. apply paragraph rule so that it covers the text entirely (for example, for 10pt text I would make rule about 20pt thick)
3. change the left indent to any value but zero and/or change the paragraph alignment to centred or flush right.
Now, if I try to select the text characters the text is selected as if it would still be left aligned with no indent. It means, I can not know if I have selected the text correctly. (I even tested this by selecting the text and then setting the indent to zero and alignment to left, and then the selection is in the correct place.)
I have tried to "cure" this via idml file, but it gives no result. Even when trying this in new document it makes the same problem.
My guess is that this is in some way concerned with fact that InDesign in Mac now uses system-wide text selection.
I have InDesign CC 9.1 on Mac OS X 10.8.5

This sounds like a bug, and you should report it: Adobe - Feature Request/Bug Report Form

Problem with rule file ,not able to create a new column

I am trying to create a text temp in column 53 and trying to join with another column54.A new column temp is created but some filelds are blank instead of temp.I donot understand why it is happening like this ,what is the reason behingd this .
Thanks

Check out the following thread..
Re: SLD forbidden access
Your user id has to be assigned to the group JDI.develeopers
Regards
Krupa
Message was edited by: Krupakar Oleti

Problem with rules

I want to create a rule that under certain conditions copies a message to one mailbox and then moves it to a second mailbox (removing it from its original mailbox). However, when I do this and set up the corresponding actions the Rules Preferences insists on reordering the actions so the move happens first. Surely this will mean it's not then available for the copy ?

Matthew Morgan wrote:
Are you saying Apple Mail is broken in this area ?
Not necessarily, I'd need to know more specifics about what you're trying to do.
Matt
I thought I made it clear in my original post, but this is what I mean -
1. I go into Mail/Preferences/Rules
2. I select any for the if statement
3. Next line I have Any Recipient Contains "My String" (a particular sequence of characters)
4. After "perform the following actions" I have 2 actions. The first is a copy to a specified mailbox. The second is a move to another mailbox. However when I click OK the two actions get resequenced so the move becomes the first action. Firstly, is this correct behaviour, and secondly, am I right in thinking this will delete the message from the source mailbox thus causing the second action to fail ?
Also, what I really wanted to do was 2 move actions, leaving the original mailbox unaltered, however the Rules Preferences doesn't seem to allow this. After doing one move and then adding another action the move option becomes greyed out.

Problem with two of my business rule triggers

Good morning every one,
I have a small problem with two of my business rule triggers.
I have these tables:
pms_activity
csh_cash
csh_integrate_leh
csh_integrate_led
and my process goes like this:
upon approval of a row in my pms_activity table I have a trigger that insert a row in my csh_cash - and in the csh_cash table I have a trigger that will insert in the csh_ingerate_leh and csh_integrate_led.
my problem is pms_activity does generate a row in csh_cash but the trigger in the cash does not fire to generate a row in the csh_integrate_leh and led tables.
I have generated in the following order after I created my business rule:
I have generated the table from the designer (server module tab)
I have generated the CAPI from the head start utility
I have generated the API from the designer
I have generated the CAPI from the designer
I have run the recompil.sql
I have checked that my business rule trigger is enabled and should run on insert and no where restriction
=== this is my business rule logic ======
l_rule_ok boolean := true;
begin
trace('br_csh001_cev (f)');
csh_gl_pkg.csh_gen_integ_jvs(p_id
,p_ref_num
,p_own_id
,p_trt_id
,p_value_date
,p_description
,p_amount
,p_cur_id
,p_gla_dr
,p_gla_cr
,p_gla_pl
,p_gla_rev
,p_gla_eqt);
return l_rule_ok;
exception
when others
then
qms$errors.unhandled_exception(PACKAGE_NAME||'.br_csh001_cev (f)');
end br_csh001_cev;
==== end =======================
Any help will be appreciated as I have struggled with this for two days.
Thanks

hmmm...
Try resetting it again and restoring with the same backup file...
Does the phone work properly once you've reset it before you try restoring? A lot of people here have experienced problems restoring from backups... could be worth forgetting about it and starting from scratch.
You could try contacting your nearest Nokia Service Centre (www.nokia.com/repair) and see if they can do anything - it may need the firmware reinstalling or upgrading... possibly... give them a call though and see.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Problem with business rule

Hi all,
I have a problem with a business rule (BR) deployed as a standalone Descision service.
the BR consists on a simple decision table wich compare an input (bigInteger) with 50. It returns two facts (as output).
the two conditions are confugured (i.e. <50 and >=50).
the Decision service (stateless) is called in a simple BPEL process. in some cases the the assign activity in the bpel process rise this exception :
<bpelFault><faultType>0</faultType><selectionFailure xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"><part name="summary"><summary>empty variable/expression result. The XPath variable or expression /ns5:callFunctionStatelessDecision/ns5:resultList/ns6:processResponse/ns6:CodeRetour is empty at line 440. An attempt to read or copy data referenced or computed by the XPath expression either had invalid data, according to the XML schema, or did not contain certain optional data. Ensure that the variable or expression result named in the error message is not empty. Enable XML schema validation of related variables to ensure the run-time data is valid. </summary></part></selectionFailure></bpelFault>
it seems like an output of the business rule used by the assign after the invoke activity is empty.
But in the input payload for the decision service all elements are not empty. I can't inderstand how the OBR return an empty variable?
Any help please?

In the taskflow you should be capable to trace step by step what happens in the execution. Does this give any clue, e.g. why sometimes the assert does not work?
cu
Andreas

Problem with Business Rules in OBPM 10.3.1 Enterprise for WebLogic

We're having a problem with our Business Rules. We've updated two of our business rules (that are used by business rule transitions) in Studio; however, when we publish the updated process, the business rules are not updated. We cannot find anywhere in the Process Admin where to administer the rules to make sure they're overwritten.
I've double checked, and the updated rule code is in the .project.xpdl, but for whatever reason, the rules are not being updated during the deployment. I'm sure that we've done this many times in the past, but for some reason, now it is not working.
We're tried variations of the different versioning when we publish, and we've also tried to unpublish all of the older versions of our process, but it does not change the business rules. We can try to unpublish and undeploy, but it seems like we would lose all old instances of that process that are still running if we did that.
Has anyone ever had this issue, or know if there is a way to effect the business rules via the process admin?

I see what you're saying, but here's why it works the way you're observing it.
Once deployed, the 10g business rules are edited by a business user (the owner of the rule). Changes in Studio that a developer makes to a business rule don't override the changes that the business user made.
To let the business owner edit the rule, add a Global Interactive activity and change its property setting to edit the business rule. Put this activity in the role for the business owner (the person you want to edit the rule).
Dan

Problem with the active version of the transfer rule ABAP program with sour

Hi,
I have a problem with the active version of the transfer rule ABAP program with source system EXCEL.
The system does not react to changes done in the transfer rule coding. For FISCPER I have hardcoded the result 'BABABA' and still the results delivered are those from the CSV.
Resetting the system buffers does not help. The problem is systematic in combination with source system EXCEL (i.e. not only 1 InfoSource). Checking the active program Extras->Display Program shows the coding (result='BABABA') being there, but
as stated, the system does not produce the result BABABA, but instead the result of the CSV.
It seems as if the original version from the very first activation of the transfer rule program remains somewhere and continues to be used. Does anybody know how to flush it out and get the system to actually use the coding appearing as the active program.
I have posted an OSS note, but SAP takes it time to answer and I am under time pressure so I figured that maybe one of you know who to solve it before SAP does.
Greetings and thanks,
Martin

Hi martin,
just try to go out the RSA1 and then return to your infopac. ...
sometimes there some "cache" trouble

Problem with scrambling rules

Good afternoon, I have a problem with the conversion rules, when I transfer the employee does not take into account any of the scrambling rules, those made by me and with the rules that I copied by CNV_TDMS_HCM_SCRAM transaction. I understand that this conversion is performed in the task to prepare data transfer. Someone can give me an idea that I may fail to do. Somebody has documentation of Scrambling rules? Thanks in advance.
Manuel Campos

Thank you, when I execute the program wherever Phase or activity ID that I select, for example PC001_RULES_MAINTAIN
It shows me this:
Rules for packege 90042
Rule Name                     Status         Active
CNV_MBT_BOP             red              check
INITIAL                           red             check
MOVE                            red             check
01_RVNUM_CK_DGT      red             check
99_HR_PEVAL2              red             check
99_PD_SEQ_NR             red             check
ADDR_SCRAM1             green          check
SAMP_SCR_DOM          red             check
SAMP_SCR_FIELD        green          check
In your package appear something like this?
I used transaction CNV_TDMS_HCM_SCRAM to prepare and maintain customizing for
scrambling at project or subproject level. And I made this:
To use the SAP template, choose Copy from other Project. You can now copy a scramble
definition. To copy the SAP template, input the following:
Pack ID: TDHSC
Project: *
Subproject: *
Process Type: R
Select the "Get from client 000" checkbox .
You can use a description prefix, for example SAP_, to easily identify elements. For
example, if you use this prefix and the name of a scramble group in the template is
HCM_DE_01, then after the copy the name is SAP_HCM_DE_01. This is useful for copying
in add-on mode into an existing project, because it helps you to determine what was new
from this copy.
Then I tried to use this scrambling rules copied, but They doesn´t work.
Thanks a lot for your help

Problem with Settelment Rule for iw32

Hi,
Good day guys
Iam getting the problem while creating the settelment rule creation. Ive got a problem with " wa_srules-SOURCE     = '1' ".
If i wont fill this field, settelment rule is going to be created. but i need to fill this field as per requirement.
Ive got a error message "Enter an Existing source assingment for souce stracutre CS.
Plz any one guide me, how to overcome this prob
DATA: srules TYPE srules_ext OCCURS 0,
      wa_srules TYPE srules_ext,
      lv_mandt type SYMANDT.
DATA IT_OBJNR TYPE STANDARD TABLE OF IONRB WITH HEADER LINE.
DATA: ls_copadata type BAPI_COPA_DATA occurs 0.
DATA: ls_cobrb type standard table of cobrb with header line.
IT_OBJNR-OBJNR = CAUFVD_IMP-OBJNR.
APPEND IT_OBJNR.
break-point.
CALL FUNCTION 'K_SRULE_PRE_READ'
EXPORTING
   I_PFLEGE               = ' '
TABLES
   T_SENDER_OBJNR          = IT_OBJNR
*   T_COBRA                =
EXCEPTIONS
   WRONG_PARAMETERS       = 1
   OTHERS                 = 2
CALL FUNCTION 'K_SETTLEMENT_RULE_EXISTENCE'
EXPORTING
    objnr                = caufvd_imp-objnr
*   FLG_LOCAL            = ' '
* IMPORTING
*   E_COBRA              =
EXCEPTIONS
   RULE_NOT_FOUND       = 1
   OTHERS               = 2
CALL FUNCTION 'K_SRULE_CREATE'
EXPORTING
   i_objnr                   = caufvd_imp-objnr
*     I_CHECK_ONLY_LOCAL        = ' '
*   IMPORTING
*     E_COBRA                   =
EXCEPTIONS
rule_already_exists       = 1
OTHERS                    = 2.
wa_srules-SOURCE     = '1'.
wa_srules-settl_type = 'FUL'.
wa_srules-percentage = '100'.
*wa_srules-amount     = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
wa_srules-SOURCE     = '1'.
wa_srules-settl_type = 'PER'.
wa_srules-percentage = '100'.
*wa_srules-amount     = ''.
wa_srules-COMP_CODE = caufvd_imp-bukrs.
*wa_srules-PROFIT_CTR = caufvd_imp-PRCTR.
*wa_srules-costcenter = caufvd_imp-kostl.
wa_srules-costcenter = '10-60'.
APPEND wa_srules TO srules.
CALL FUNCTION 'K_ORDER_SRULE_ADD'
EXPORTING
    object_no                  = caufvd_imp-objnr
* IMPORTING
*   FLG_RULE_INSERTED          =
tables
    srules                     = srules
IF sy-subrc = 0.
commit work.
Endif
Regards
Edited by: balaji kiran on Mar 26, 2010 10:18 AM

Hello Vitaliy,
Nice to "see" you here
I did try remodelling and it works fine here. A constant value rule really gets a constant value.
The user exit option also works fine here. Here's an example of a very simple user exit for a KF:
method IF_RSCNV_EXIT~EXIT.
FIELD-SYMBOLS: <l_s_old> TYPE ANY,
                 <l_fillfield> TYPE ANY,
                 <l_newfield> TYPE ANY,
                 <fs_kfsource> type any.
* Assign the references to field symbols
ASSIGN c_r_newfield->* TO <l_newfield>.
ASSIGN i_r_old->* TO <l_s_old>.
* We will use the value of the 0AMOUNT KF. The value of the new KF is 0AMOUNT + 5.
ASSIGN COMPONENT 'AMOUNT' OF STRUCTURE <l_s_old> TO <fs_kfsource>.
<l_newfield> = <fs_kfsource> + 5.
endmethod.
For a KF, you can check the fields of the FACT Table (/BIx/Fzzzz) to know the field names for your source KFs.
Hope this helps.

RSAU461, problem with activating update rules for cube 0csrv_c01

Hello,
I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
Regards
Radek

hi
As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
Khaja

A problem happened when building dimensions with Rule File

Hi All,
I was trying to build dimensions with the rule file. But it showed the error 1030100, which means "cannot open file".
I can load data with a data source (.txt). Thus, I assumed that it's a problem to open a rule file.
I don't think it's the problem about the rule files I wrote since I cannot even build dimensions with rule files in the Sample/Basic database.
Anyone knows how to solve the problem? Thanks for the help.
Best Regards,
Anderson

854285 wrote:
Hi Prebhas,
Here are the error messages:
Object [Basic] is locked by user [admin]
Building Dimensions Elapsed Time: [0.016] seconds
Cannot open file: [E:\Hyperion\products\Essbase\eas\Client\dataload.err]
Unexpected Essbase error 1030100
Object [Basic] is unlocked by user [admin]
p.s. Even I re-install my system is English, the word "Client" is shown in Chinese. Is it possible this is the reason? If so, how I change the folder?
After I saw this message, I checked the folder and there is no such file. I tried to created one, but it disappear after I tried to build dimensions.
Best Regards,
Anderson
Edited by: 854285 on 2011/4/25 上午 3:27HI,
E:\Hyperion\products\Essbase\eas\Client\dataload.err
This path is referred to error message .... it will show the errors in that file...
and one more thing...
while adding data source to rule file it will ask you provide a path for the error message...there you can see this path...
Just check dataload.err file after running the rule file...
have you associated the out line to the rule file ???
is that rule file validate fine?
if not associate it and try...
Regards,
Prabhas
Edited by: P on Apr 25, 2011 4:43 PM

Steps to troubleshoot and get past common problems with Audition

When you encounter a problem with Audition, the following steps are often useful for getting past the problem and/or determining the cause of the problem:
1. Hold down SHIFT while you launch Audition
     This overrides the preference files and launches Audition using the default settings.
2. Manually rename or delete the preferences folder
     Step 1 only overrides certain preference files, while others such as Workspace preference files, may be the cause of the problem. Depending on your OS, locate the "5.0" folder in the location below and rename it or delete it.
     Windows XP: C:\Document and Settings\<username>\Application Data\Adobe\Audition\5.0\
     Windows Vista/7: C:\Users\<username>\AppData\Roaming\Adobe\Audition\5.0\ *
     Mac OS X: ~\Library\Preferences\Adobe\Audition\5.0\ **
          * "AppData" may be a hidden folder. You can type it into the location bar, or enable "Show Hidden Files" in Windows.
          ** This is your user-level Library folder, not the system-level tree.
3. Check your Audition Log.txt file
     To enable a log file with CS 5.5, you must create an empty file in your preferences folder called "Audition Log.txt" using notepad, text edit, or any other editor. After you create this file, launch Audition and if it fails, open and/or share the log file for more specific information about what's happening.
4. Check the Operating System console or error log
     Both OS X and Windows can track application errors, and if the problem is occurring outside of the application code - a driver conflict, for example - then the OS error report may be more informative than what we can get from the application.
     OS X: launch /Applications/Utilities/Console.app   Clear the view, then launch Audition and note any error messages that appear.
     Windows: launch Control Panel > Administrative Tools > Event Viewer > Windows Logs > Application then launch Audition and note any error messages that appear.
5. Re-install Audition
     If at this point, nothing has resolved the issue or the error logs are inconclusive, it's a good time to uninstall Audition, reboot, and reinstall Audition.
6. Obtain the full crash dump and send it to the Adobe team
     So you've walked through all the above steps, you've disconnected any external hardware interfaces to rule out any device or driver conflicts, and you've exhausted the basic troubleshooting steps. Visit http://forums.adobe.com/thread/900619 and follow the steps for your OS that Charles has documented to best obtain a full crash memory dump for Audition, and send that to [email protected] with a description of the problem and the steps you've taken, and we'll take a look.

Firstly yes these are common problems and secondly hopefully they will be fixed with updated software 2.1 which is due for release this coming Firday!

WF problem with rule

Similar Messages

Maybe you are looking for