WFA 3.1RC1 throws "Object reference not set to an instance of an object", worked in 3.0P1
I am running a custom workflow to create volumes that has worked since WFA 2.x, and which works well in 3.0P1. With WFA 3.1RC1 it throws this error when attempting to apply a quota to the volume: INFO [Apply Quota Policy to Volume or Qtree] Started Quota resize on volume post_wfa31rc1_test2_w_mirror on vserver MySVM ERROR [Apply Quota Policy to Volume or Qtree] Command failed for Workflow 'Create Volume (Schwab)' with error : Object reference not set to an instance of an object. INFO [Apply Quota Policy to Volume or Qtree] ***** Workflow Execution Failed ***** I have executed the PS commands from this code block in a PS shell with no errors. Has anyone else seen a similar issue with 3.1RC1? Scott Lindley
I have narrowed the problem down to a single command and can reproduce the problem very easily. However, I can't seem to fix it. But I believe importing this single custom command into both a WFA 3.0P1 and WFA 3.1RC1 system will easily show that it works in 3.0P1 and throws the odd 'Object reference not set to an insance of an object' error. I say that is an odd error because I'm only used to seeing that error at Preview time referring to an object reference in a Command Parameter field of a workflow. I know how to deal with that issue. However here, the error appears at the end a PowerShell command. Actually, the PowerShell command appears to me to execute entirely and correctly. It is just that at the end of running this exception error is thrown and that causes the command (and workflow if running within a workflow) to fail. But the comamnd correctly adds the 'default' quota policy to the volume and even enables quota resize as it should. So it works, but still blows up the workflow it is within. I'm going to attempt to attach these three things here: 1) screenshot showing the command running (with Command Test Button) fine under WFA-3.0P1, 2) a screenshot showing the command running but throwing the error on a WFA-3.1RC1 system 3) the ,dar file holding just the command: "Apply Quota Policy to Volume or Qtree" (I added .txt to the end of .dar file name) ------1) running OKay on 3.0P1 -------------------------- 2) running with the ERROR on WFA 3.1RC1 SOME NOTES: My lab environment where I re-created the problem: The WFA 3.0P1 system is a Windows 2008R2 server that happens to have the original PowerShell 2.0 on it The WFA 3.1RC1 system is a Windows 7 system that I have updated PowerShell to 4.0. The customer environment: I'm less certain of details (maybe Scott can fill in) The version of PowerShell is TBD (guessing 2.0) , but they are running the same PS version for both 3.0P1 and 3.1RC1 because they are upgrading/downgrading WFA on the same system
Similar Messages
-
Content source is throwing Object reference not set to an instance of an object
we have migrated SharePoint 2010 data to share point 2013 . after migrating web application when we try configure content source we are getting below error in logs. when we are opening content source in search service application.
Application error when access /_admin/search/listcontentsources.aspx, Error=Object reference not set to an instance of an object. at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext
context) at System.Web.HttpApplication.CallHandlerExecutionStep.S... c503ba9c-dabd-00a4-69f1-8ce1acd494bf
Disable loop check is done on web and app server.
Appreciate your quick help!
Regards,
-Naveen.
-NaveenTry to run below command check if it helps
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
Also let us know exact error in ULS Logs. If possible share ULS logs
If this helped you resolve your issue, please mark it Answered -
Object reference not set to an instance of an object on clicking BI Tab
Hi,
I have installed Oracle BI Publisher Desktop 11.1.1.6.0 for 32 bit Office on Windows XP, Microsoft Word 10.
However, after successful installation, when I open word and click on BI Publisher Tab , it throws error "Object reference not set to an instance of an object".
Please help me resolve this setup issue.
Thanks in Advance.
Cheers,
SarikaHi,
This is a general error message. I would ask the following questions to verify the issue:
1. Are these charts inside the table?
2. Does the table display fine? What’s the size of the report and charts?
Please try download the latest cumulative update package for SQL Server 2008 R2 Service Pack 2 from the following link and see if it address the issue:
http://support.microsoft.com/kb/2730301/en-us
You can also capture the screenshots regarding the issue so that I can understand
problem in more details.
Thanks.
Tracy Cai
TechNet Community Support -
Object Reference Not Set To An Instance Of An Object - Outlook Add-In - Add-In Express
Hi,
My Add-In has been developed in VS2010 using the Add-In Express pack.
Its a very simple add-in that shows an IT support ticket email detailing PC information. To use it, following installing the add-in, the user must select the tab in outlook and click on the Send IT Support Email button which will generate an Outlook Email
Template with specific information about the PC that I pull using VB.
It works fine in Windows 7 & 8, but throws an 'Object Reference Not Set To An Instance Of An Object' exception in Windows XP. Screenshot is shown below:
The code is below
Imports System.Runtime.InteropServices
Imports System.ComponentModel
Imports System.Drawing
Imports System.Windows.Forms
Imports AddinExpress.MSO
Imports System.Object
Imports System.Net
Imports System.Environment
Imports System.Net.NetworkInformation
Imports System.Windows.Forms.Application
Imports Microsoft.Office.Interop.Outlook
Imports outlook = Microsoft.Office.Interop.Outlook
'Add-in Express Add-in Module
<GuidAttribute("735B7BC8-DD2F-44D8-BC37-30D86769C065"), ProgIdAttribute("$safeprojectname$.AddinModule")> _
Public Class AddinModule
Inherits AddinExpress.MSO.ADXAddinModule
#Region " Add-in Express automatic code "
'Required by Add-in Express - do not modify
'the methods within this region
Public Overrides Function GetContainer() As System.ComponentModel.IContainer
If components Is Nothing Then
components = New System.ComponentModel.Container
End If
GetContainer = components
End Function
<ComRegisterFunctionAttribute()> _
Public Shared Sub AddinRegister(ByVal t As Type)
AddinExpress.MSO.ADXAddinModule.ADXRegister(t)
End Sub
<ComUnregisterFunctionAttribute()> _
Public Shared Sub AddinUnregister(ByVal t As Type)
AddinExpress.MSO.ADXAddinModule.ADXUnregister(t)
End Sub
Public Overrides Sub UninstallControls()
MyBase.UninstallControls()
End Sub
#End Region
Public Shared Shadows ReadOnly Property CurrentInstance() As AddinModule
Get
Return CType(AddinExpress.MSO.ADXAddinModule.CurrentInstance, AddinModule)
End Get
End Property
Private Sub AddInModule_AddInInitiatize(ByVal sender As Object, ByVal e As EventArgs) _
Handles MyBase.AddinInitialize
'Outlook 2010 = 14
If Me.HostMajorVersion >= 14 Then
AdxOlExplorerCommandBar1.UseForRibbon = False
End If
End Sub
Public ReadOnly Property OutlookApp() As Outlook._Application
Get
Return CType(HostApplication, Outlook._Application)
End Get
End Property
'Gets the MAC Address from the NIC Information
Function getMacAddress()
Dim nics() As NetworkInterface = _
NetworkInterface.GetAllNetworkInterfaces
Return nics(0).GetPhysicalAddress.ToString
End Function
Sub CreateTemplate()
Dim sHostName As String
Dim sDomain As String
Dim sUserName As String
Dim sOS As String
Dim s64 As String
Dim sMAC As String
Dim host As String = System.Net.Dns.GetHostName()
Dim LocalHostaddress As String = System.Net.Dns.GetHostEntry(host).AddressList(1).ToString()
Dim MyItem As Outlook.MailItem
'Finds the PC Number
sHostName = Environ$("computername")
'Finds the Domain
sDomain = Environ$("userdomain")
'Finds the Username logged into the PC
sUserName = (Environment.UserDomainName & "\" & Environment.UserName)
'Finds the Operating System
sOS = (My.Computer.Info.OSFullName)
'Shows the results collected from the getMacAddress Function in the sMac variable
sMAC = getMacAddress()
'Finds the Architecture of the Operating System - x86 or x64
If (Environment.Is64BitOperatingSystem) Then
s64 = ("64bit")
Else
s64 = ("32bit")
End If
'Creates a Template Email
MyItem = OutlookApp.CreateItem(Outlook.OlItemType.olMailItem)
'Configures the Sender as [email protected]
MyItem.To = "[email protected]"
'Shows the template
MyItem.Display()
'Shows all of the string in the Email Body
MyItem.HTMLBody = String.Concat("<b><u>IT SUPPORT TICKET</u></b>", "<br/><br/>", "<tr><b>PC Number: </b></tr>", sDomain, "\", sHostName, "<b></b>", "<br/><br/>", "<b>Username: </b>", sUserName, "<b></b>", "<br/><br/>", "<b>OS Version: </b>", sOS, s64, "<b></b>", "<br/><br/>", "<b>IP Address: </b>", LocalHostaddress, "<b></b>", "<br/><br/>", "<b>MAC Address: </b>", sMAC, "<b></b>", "<br/><br/>", "<b>Comment:</b>", "<br/>", "<i>Please give a brief description of your problem attaching a screen shot if possible</i>", "<br/><br/>") & MyItem.HTMLBody
End Sub
Private Sub AdxRibbonButton1_OnClick(ByVal sender As Object, ByVal control As IRibbonControl, ByVal pressed As Boolean) Handles AdxRibbonButton1.OnClick
'Runs CreateTemplate
CreateTemplate()
End Sub
Private Sub AdxCommandBarButton1_Click(ByVal sender As Object) Handles AdxCommandBarButton1.Click
'Runs CreateTemplate
CreateTemplate()
End Sub
End Class
I would appreciate any help with this whatsoever as I am pulling my hair out!!
Many Thanks!!
ChrisHi,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your Add-in is developed using Add-in Express which is third-party, I suggest consulting Add-in Express forum:
http://www.add-in-express.com/forum/index.php for better support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
"Object reference not set to an instance of an object" on loading reports
Hi,
I get "object reference not set to an instance of an object" for some charts in a report.
Software: SQL Server 2008 R2 SP2 & SharePoint 2010
I have 2 reports each with multiple graphs & tables. The reports are used in SharePoint integrated mode.
3 months back Report1 gave the error for 4 specific charts. After a few days, the error vanished magically & all charts displayed correctly.
I recently deployed Report2 which also contains charts & tables. After a few days, the 1st chart itself would not display throwing this error. I deleted the Report2 from SharePoint and redeployed it. Now the error is shown for 2 charts in between &
I again see the error for the same 4 charts of Report1.
Since deleting and redeploying the Report2, moved the error to a different chart, it does not look like a problem with the chart itself. Please suggest on what I can do further.Hi,
This is a general error message. I would ask the following questions to verify the issue:
1. Are these charts inside the table?
2. Does the table display fine? What’s the size of the report and charts?
Please try download the latest cumulative update package for SQL Server 2008 R2 Service Pack 2 from the following link and see if it address the issue:
http://support.microsoft.com/kb/2730301/en-us
You can also capture the screenshots regarding the issue so that I can understand
problem in more details.
Thanks.
Tracy Cai
TechNet Community Support -
I am working on a standalone install Sharepoint 2013 (no Active Directory). I found newsfeed feature is not available and checked Distributed Cache service is stopped. When start it “cacheHostInfo is null” is returned.
I checked the Windows service “AppFabric caching service” is stopped because the default identity “Network Service” not work. Then I change the AppFabric service identity to use “.\administrator” (which is also the sp farm administrator) and the service can
be started.
However the “cacheHostInfo is null” when try to start Distributed Cache service in central admin.
I searched on web and found this blog: http://rakatechblog.wordpress.com/2013/02/04/sharepoint-2013-spdistributedcacheserviceinstance-cachehostinfo-is-null/
I tried to run the script but it return error:
Add-SPDistributedCacheServiceInstance : Object reference not set to an
instance of an object.
At C:\root\ps\test.ps1:8 char:13
+ $whatever = Add-SPDistributedCacheServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share…ServiceInstance:
SPCmdletAddDist…ServiceInstance) [Add-SPDistributedCacheServiceInstance]
, NullReferenceException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletAddDistr
ibutedCacheServiceInstance
I am not sure what went wrong. Please give me some idea? Thank you for any comment!Can you deploy Active Directory as installing without is not a supported installation scenario - http://support.microsoft.com/kb/2764086.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hi All,
When we do a test-outlookconnectivity -protocol:http the result is a success but then we get the following:
ClientAccessServer ServiceEndpoint Scenario
Result Latency
(MS)
xxxxxxxxxxxx... xxxxxxxxxxxxxx Autodiscover: Web service request. Success 46.80
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
So it looks like it's not completing successfully.
I can't find anything on this in particular, and don't really know how to go about solving it - We are fully up to date, Exchange 2010 Sp2 with Rollup 5-v2
Any help appreciated!hi,
I have the same issue also on Exchange 2010 SP2 RU5v2
I ran your command and get the below
[PS] C:\Installs\report\Activesync>Test-OutlookConnectivity -Protocol:http |FL
RunspaceId : ebd2c626-1634-40ad-a17e-c9a713d1a62b
ServiceEndpoint : autodiscover.domain.com
Id : Autodiscover
ClientAccessServer : CAS01.domain.com
Scenario : Autodiscover: Web service request.
ScenarioDescription :
PerformanceCounterName :
Result : Success
Error :
UserName : Gazpromuk.intra\extest_645e41faa55f4
StartTime : 8/21/2013 4:08:50 PM
Latency : 00:00:00.1250048
EventType : Success
LatencyInMillisecondsString : 125.00
Identity :
IsValid : True
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an instance of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Test-OutlookConnectivity], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Monitoring.TestOutlookConnectivityTask
Any help would be greatly appreciated, I also get random failures of OWA, EAS and web services, very frustrating
I have no errors in the app event log
thanks
Faisal Saleem Windows Systems Analyst 07595781867 -
"An error has occurred:Object reference not set to an instance of an object."
This error message comes up with a user in InfoView. The user schedules a report, updates parameters, and the report kicks off successfully. But then a few minutes later, this error is received. This occurs sporadically, regardless of the length of time of report or amount of data being retrieved. Sometimes the report runs to completion. Other times this error message occurs.
Has anyone seen this before and have any thoughts?
Thank you.
“An error has occurred:Object reference not set to an instance of an object.”Are you able to replicate the issue both in Java and .NET InfoView?
For .NET InfoView, sometimes the "An error has occurred: Object reference not set to an instance of an object" error shows up after the .NET Framework is upgraded to 2.0 -
Hello.
I just installed a new farm, the wizard was succesfull in all steps. However when I try to load the default site it created I got this exception.
Any idea?
System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_ApplicationProperties() at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.get_PartitionIDs()
at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.IsAvailable(SPServiceContext serviceContext) at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.EnsureMySiteUrls()
at Microsoft.Office.Server.WebControls.MyLinksRibbon.get_PortalMySiteUrlAvailable() at Microsoft.Office.Server.WebControls.MyLinksRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at
System.Web.UI.Control.LoadRecu...
Follow me on Twitter <<<I tried removing the user profile service application and creating it again, when I did that, and tried to navigate to the page to manager the user profile application it shows me an exception
According to the uls log viewer its;
Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your administrator.
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy() at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.IsProfileSynchronizationRunning() at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderSectionContents(HtmlTextWriter
writer) at Microsoft.SharePoint.Portal.WebControls.UserProfileServiceImportStatisticsWebPart.RenderWebPart(HtmlTextWriter writer) at Microsoft.SharePoint.WebPartPages.WebPart.Render(HtmlTextWriter ...
I checked and the sharepoint web services default was stopped, I started and still the same error, that pool is under Local Service account.
Follow me on Twitter <<< -
"Object reference not set to an instance of an object" in WAD
10:45:09.659 ########## --> com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SwitchEditable ##########
-EXCEPTION-START- 10:45:09.659: DEBUG ### Browser Init failed. 2nd try will be proceeded. ---
Exception Message: Object reference not set to an instance of an object.
Exception at SAPWADMXHTML.IWADMXBrowser2.AttachAnnotator(Boolean On)
at com.sap.bi.et.wad.AxSAPWADMXHTML.AxCWADMXBrowser2.AttachAnnotator(Boolean on)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SwitchEditable(Boolean iBool)
Full Stack:
at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
at com.sap.bi.et.wad.Debug.Exception(Exception, String)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SwitchEditable(Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.set_BrowserDesignMode(Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.Navigate(String, Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SetHTMLsafe(String, Boolean)
at com.sap.bi.et.wad.wadhtmlediting.WADctlWADHTMLControl.SetHTML(String, Boolean)
at com.sap.bi.et.wad.man.WADctlEditViewLayout.SetDocumentHTML(String)
at com.sap.bi.et.wad.man.WADctlEditViewLayout.TemplateXML2HTMLEdit()
at com.sap.bi.et.wad.man.WADfrmTemplateMDIWindow.UpdateView(Int32, Int32, Boolean)
at com.sap.bi.et.wad.man.WADfrmTemplateMDIWindow.tabLayoutTab_Switch(Object, EventArgs)
at System.Windows.Forms.TabControl.OnSelectedIndexChanged(EventArgs)
at System.Windows.Forms.TabControl.WmSelChange(Message&)
at System.Windows.Forms.TabControl.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.SendMessage(HandleRef, Int32, IntPtr, IntPtr)
at System.Windows.Forms.Control.SendMessage(Int32, IntPtr, IntPtr)
at System.Windows.Forms.Control.ReflectMessageInternal(IntPtr, Message&)
at System.Windows.Forms.Control.WmNotify(Message&)
at System.Windows.Forms.Control.WndProc(Message&)
at System.Windows.Forms.ScrollableControl.WndProc(Message&)
at System.Windows.Forms.ContainerControl.WndProc(Message&)
at System.Windows.Forms.Form.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr, IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.NativeWindow.DefWndProc(Message&)
at System.Windows.Forms.Control.DefWndProc(Message&)
at System.Windows.Forms.Control.WmMouseDown(Message&, MouseButtons, Int32)
at System.Windows.Forms.Control.WndProc(Message&)
at System.Windows.Forms.TabControl.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
at System.Windows.Forms.Application.Run(Form)
at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----Hello Dieu,
Have you found a solution of this exception?? i also come across this one.
Kind Regards,
Clark -
"object reference not set to an instance of an object" error while running ssrs report locally
Hi Folks,
I am a bit new to SSRS.
I am using ssrs 2012 and trying to use a method from a dll file. I am loaded the assembly file in reference of the report.
Now I am trying to use a static method from the Dll. e.g. applicationName.classname.MethodName()
But while running the report I am getting "object reference not set to an instance of an object" error.
For a note I am trying execute the report locally.
Any help would be highly appreciable.
sarat chandra sahooSorry for late reply Sinaloe..
I have added a dll file in my report reference. And in a textbox trying to execute this below.
=Recall.Common.LocalizationEx.Localization.GetString(Parameters!Culture.Value, "RFID", "BICustomerPortal")
where Getstring() is a static method in the dll.
I guess some configuration setting I am missing here.
1. I have copied these dlls in "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PrivateAssemblies" and "C:\Windows\Assembly".
sarat chandra sahoo -
Object reference not set to an instance of an object error with Import data
Hi Experts,
We are using BPC 7.5M with SQL Server 2008 in Multiserver environment, I am getting an error "Object reference not set to an instance of an object." while running Import data package, earlier we use to get this error sometime(once in a month) but it goes away if we reboot the application server but this time I have rebotted the Application server multiple times but still getting the same error.
Please Advice.
Thanks & Regards,
RohitHi Rohit,
please see the sap note 1615837, maybe this help you.
Best regards
Roberto Vidotti -
Object reference not set to an instance of an object. in Query disigner
Using the Bex query desingne we get the following message:
An unhandled exception occured in your application etc
Object reference not set to an instance of an object.
Details are:
System.NullReferenceException: Object reference not set to an instance of an object.
at com.sap.bi.et.QueryDesigner.QDcElement.Contains(QDbElement iValue)
at com.sap.bi.et.QueryDesigner.QDbElement.WhereUsedAdd(QDbElement iElement)
at com.sap.bi.et.QueryDesigner.QDbStructureMemberFormula.WhereUsedAdd(QDbElement iElement)
at com.sap.bi.et.QueryDesigner.QDbElement.FromUndoTable(RSZ_X_ELTXREF isWhereUsed, QDcElement iElements)
at com.sap.bi.et.QueryDesigner.QDbElement.FromTables(Hashtable iTables, QDcElement iElements)
at com.sap.bi.et.QueryDesigner.QDbElement.Undo(QDbUndoRedoBuffer cUndoBuffer, QDbUndoRedoBuffer& cRedoBuffer)
at com.sap.bi.et.QueryDesigner.QDbCommandEditElement.Undo()
at com.sap.bi.et.QueryDesigner.QDbCommandEditElement.EditFormula(IQDView iSelectedView)
at com.sap.bi.et.QueryDesigner.QDbCommandEditElement.ExecuteCommand()
at com.sap.bi.et.QueryDesigner.QDbCommandBase.Execute()
at com.sap.bi.et.QueryDesigner.QDbCommandManager.CommandExecute(QDbCommandBase iCommand)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.InitialCommandExecute(QDbCommandBase iCommand)
at com.sap.bi.et.QueryDesigner.QDbCommandManager.DoExecuteCommandInternal()
at com.sap.bi.et.QueryDesigner.QDiButtonCommand.Execute()
at com.sap.bi.et.QueryDesigner.QDiButtonCommand.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at Syncfusion.Windows.Forms.ButtonAdv.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)Thanks for the suggestion Deepu. I looked at the available downloads and saw there was a SP13 available, so I downloaded that and will try this on Monday May 21st.
I will also check the .NET 1.1 framwork and hotfixes. -
I'm running this command in the Azure PowerShell to deploy my node project as a service:
Publish-AzureServiceProject -ServiceName <name> -Location "East US"
Using my service name instead of <name>.
Each time I run this, I get an error:
Publish-AzureServiceProject : Object reference not set to an instance of an
object.
At line:1 char:1
+ Publish-AzureServiceProject -ServiceName <name> -Location "East US"
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : CloseError: (:) [Publish-AzureServiceProject], N
ullReferenceException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.CloudService.Pub
lishAzureServiceProjectCommand
I have added my certificate and verified it with Get-AzureSubscription.
Can anyone help?When I run Get-AzureSubscription, the subscription already seems to be set. I assume this happened when I imported my publish settings. I tried your suggestion to do it manually, but this didn't fix my problem.
I've started implementing the deployment script linked in the blog post, but I'm running into all sorts of problems as I try to do so. First, this seems to assume I have a service package and publish settings. I'm guessing the package is going to need to
be generated for each deployment, but the script doesn't handle this. How can I also have the script generate the new package so that the service can be deployed? I've currently hard-coded the path of cspack into the script, but this seems like a bad way to
do it.
Since the publish settings have the certificate, I imagine I don't want to commit those to version control. Can I also generate this as part of the script? I want the script to be as hands-off as possible.
Thank you for your help! -
I am getting an object reference not found error when trying to view the version history of any list item within my web application, as well as view or edit any list item properties in general. Below is what the ULS log generates when I try to view
the version history of an item.
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.SharePoint.ApplicationPages.VersionsPage.ItemVersion.get_CreatedBy()
at ASP._layouts_versions_aspx.__Render__control14(HtmlTextWriter __w, Control parameterContainer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer)
at System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output)
at System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children)
at Microsoft.SharePoint.WebControls.UnsecuredLayoutsPageBase.RenderChildren(HtmlTextWriter writer)
at System.Web.UI.Page.Render(HtmlTextWriter writer)
at Microsoft.SharePoint.WebControls.UnsecuredLayoutsPageBase.Render(HtmlTextWriter writer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I followed what was said in this blog post to remove any extraneous calls of the "Microsoft.Sharepoint.ApplicationPages.dll"
in the GAC or the bin folder of the web application, yet I am still getting the same error.Hi Max, did you ever get this resolved? if yes, what were steps? thanks
Stacy www.sharepointpapa.com
Maybe you are looking for
-
Higher resolution possible with capslock keyboard as midi contoller?
I'm wondering if it's possible to use the capslock keyboard in logic as a midi controller with higher precision than i seem to be getting. For example, assigning the capslock keyboard to control the tune knob in the exs24 goes from 0 > +/- 24 in 1 pr
-
[SOLVED] Linux 3.0: Udev events failed to load
Hey Guys, Nothing too alarming here. Just got this boot msg after upgrading to Kernel 3.0. Loading udev events [FAIL] I'm checking my modules right now to see if something's missing. Any idea on how I can find out what failed? Thanks. Last edited
-
How to maintain the proportions of a component?
The root content pane of my swing application has a third-party JComponent (A PCanvas from Piccolo http://www.piccolo2d.org) in the center position of a border layout. The objects I'm displaying inside this PCanvas have a fixed proportion. A problem
-
Hi all, i had database of 9.2.0.1 on windows xp. i am trying to configure EM using OMS. while discovering nodes i am getting error saying intelligent agent not running. i tried to start that using "agentctl start" but its saying "could not able to co
-
MDSInstance.getOrCreateInstance causing NoSuchMethodError
We're attempting to create an MDSInstance object to read data from the MDS database. When we run the following line: MDSInstance mdsInstance = MDSInstance.getOrCreateInstance("harvester-mds", new MDSConfig(configURL)); where configURL is the location