WFM_Op does not return when iterating indefinite​ly?
I'm using the WFM_Op function with a DAQPad 6020E with the WFMsingleBufRegenerate.C that is provided with NI-DAQ. If I change the number of iterations to zero (i.e., indefinite iterations), it never proceeds to the next instruction.
I'd ideally like to be able to have it repeatedly output a waveform in the background, but so far I've been unable to do it.
Hello;
If you input a zero as the iterations parameter, the NI-DAQ driver will probably hang your computer.
The way to keep generating the same waveform on a output channel, is to set up a continuous Analog Output operation, and pass the same array of point (the array that will determine the waveform), and keep running the Analog Output task in a loop.
That will make the same array of point to be generated over and over again, which will accomplish what you need.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments
Similar Messages
-
VOD Sound drop at commercials and does not return when TV show resumes
i've noticed that there are other customers experiencing this problem and I have not seen any response from COmast support.When playing a TV-Show from On-Demand, the sound drops when a commerical starts and does not return when the TV Show resumes.A reenct example: Walking Dead 515.Yes, I have called comcast support to report it.Of course they wanted me to go through the standard drill - Power Off/On; Refresh Signal; etc. with no result...The problem occurs on series, e.g. - Walking Dead 515; Grey's Anatomy; It happens after the episode has been in the On Demand listing for about a week.It seems that the sponsors are no longer paying for the commercial, so the sound drops when the commercial comes on.However, the sound does not come back when the commercials end and the show comes back on.Stopping playback and starting at that point returns the sound, but, - oftentimes, the counter doesn't advance correctly in the Recently Viewed listing, so you end up starting back to the last time you stopped it. This is clearly a bug on the back-end, and I don't expect it to be fixed until enough people complain and Comcast Support replicates the problem observes it for themselves.
I have this EXACT problem on Anthony Bourdain's show Parts Unknown and the Last Ship. As soon as it hits the advertizement sound drops and continues as dropped. Pausing and restarting the program completely after exit regains sound but as soon as it hits another commercial it goes out again. The counter problem makes this option only good for a few times. Then it resets back.
-
Automator - Run Shell Script - Does not return when script launches firefox
Automator does not work the same on my MacBooks as my Mac mini! Both are latest Snow Leopard. I'm trying to automatically setup my MacBook after it decides if I'm at work, or elsewhere.
The Automator Action "Run Shell Script" (Shell: /usr/bin/perl) does NOT return control when attempting to launch Firefox:
system("/Application/Firefix.app/Contents/MacOS/firefox-bin -private news.google.com &");
Note: the ampersand should cause Firefox to start as a background process.
It only returns control after I close Firefox. I have a "Show Growl Notification" as the second action, so I know that the first action has not completed. Odd thing is that this works on my Mac mini. I also noticed that another difference: on my MacBook status is displayed in the top toolbar when the Automator application is running.
Any ideas?Thanks, it worked. I forgot about stderr and stdin.
I'm using Perl as it is part of a bigger script. I can quickly and easily figure out if I am at work where my MacBook is plugged into a network:
my $ethernet = qx(ifconfig en0) =~ m{status:.active}xms;
if ($ethernet) {
# setup stuff for work environment
} else {
# setup stuff for mobile environment
} -
PIE Graph does not return when values = 0
I use this code to create a PIE Chart
select null LINK
,'E0' LABEL
,(select count(*)
from parts
where om_geometry like 'E0'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
union
select null LINK
,'E1' LABEL
,(select count(*)
from parts
where om_geometry like 'E1'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
union
select null LINK
,'E2' LABEL
,(select count(*)
from parts
where om_geometry like 'E2'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
union
select null LINK
,'E3' LABEL
,(select count(*)
from parts
where om_geometry like 'E3'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
union
select null LINK
,'E4' LABEL
,(select count(*)
from parts
where om_geometry like 'E4'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid) VALUE
from parts where childid = :P1_SELECTED_NODE
It works beautifully, except when each of the values returned equate to zero.
When this is the case the svg chart is not returned. Any ideas?That will come in handy. I have some line graphs to do as well. I am using version 2.2 so i don't think they fixed it. However, i have some good news i have found a work around to my problem. With my set of data i am always going to be bringing back at max 5 values for the data, so i created an item type for each one and set a value in a temporary table. e.g.
declare
l_id number;
begin
delete from graph_temp where name like 'E0' and graph_name like 'P1_GEOM';
select count(*) into l_id
from parts
where om_geometry like 'E0'
start with childid = :P1_SELECTED_NODE
connect by prior childid = parentid;
if l_id > 0 then
insert into graph_temp (name,value, graph_name) values ('E0',l_id,'P1_GEOM');
end if;
return l_id;
end;
As you can see the table only gets populated when the value is greater than zero. My graph then becomes a simple select from the graph_temp table. The only change i now need to make is to have a session id column in the graph_temp table so i only remove the correct session info each time. -
Re: VOD Sound drop at commercials and does not return when TV show resumes
I have this EXACT problem on Anthony Bourdain's show Parts Unknown and the Last Ship. As soon as it hits the advertizement sound drops and continues as dropped. Pausing and restarting the program completely after exit regains sound but as soon as it hits another commercial it goes out again. The counter problem makes this option only good for a few times. Then it resets back.
Hi hierge, is this happening on both of your boxes or just the RNG150N (the bigger box of the two)?
Thank you -
WebI does not return failed when scheduling a report which only holds parti
WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PMHi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini -
When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
Mockery context = new Mockery();
final MessageListener messageListener = context.mock(MessageListener.class);
final Latch latch = new LatchImpl();
final String prefix = "test" + System.currentTimeMillis();
context.checking(new Expectations() {
oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
will(new CustomAction("release latch") {
@Override
public Object invoke(Invocation invocation) throws Throwable {
latch.unlatch();
return null;
final Connection connection = createConnection(null, null);
Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
connection.start();
Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
final MessageConsumer consumer = session.createConsumer(wildcardTopic);
consumer.setMessageListener(messageListener);
MessageProducer producer = session.createProducer(null);
producer.send(destination, session.createTextMessage("MSG1"));
latch.await(5000);
connection.close();
Thread.sleep(5);
context.assertIsSatisfied();Check where your MDB sends the [response] messages to.
-
OCIStmtExecute does not return immediately when client is busy.
Hi.
I'm testing a very busy multi-threaded client server that consistently generates
a large number of simple queries through oci. The problem is that, when the
server(client) is busy, OCIStmtExecute does not return immediately in
non-blocking mode.
Of course I have set non-blocking mode and OCIStmtExecute does return
OCI_STILL_EXECUTING immediately when the server is not busy. But
when log rotation occurs which concatenates a large text file (~500MB)
onto an even larger text file (up to several giga bytes), or when I simply copies
or concatenates large text files manually, OCIStmtExecute returns very slowly.
(roughly about after 100~200ms)
However, while log rotation takes place, everything else including other oci
calls that come before OCIStmtExecute (prepare, define) return fast. So
for me it really seems that only OCIStmtExecute becomes extremely slower
when local server (especially the disk) is busy.
Is there any way to let OCIStmtExecute immediately return all the time?
Thanks in advance.Yes, I knew that OCIStmtExecute would be the only function that causes such
delay and that was why I traced that call. And so far, I checked several times
what happens at the exact moment on the server but everything was ok.
Actually OCIStmtExecute becomes slower exactly when crontab-ed log rotate
occurs so I think this delay must be a client-side problem for now.
This server is quite busy and has to respond fast, so it is important to
guarantee fast response time while a small number of timeout losses are tolerable.
But as OCIStmtExecutes' first OCI_STILL_EXECUTING return takes hundreds of
ms it has become more like a blocking call and currently I cannot find any way to do what I want.
So now everytime such thing happens, the thread waits
quite long, after the first OCI_STILL_EXECUTING return
the time difference exceeds timeout limit, and the thread
calls OCIBreak() and OCIReset() and returns. -
# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
CQWP does not return result for a specific query when filtering on a managed metadata field.
Hi,
We are facing a serious production issue. We've search the web extensively but to no avail.
Problem:
CQWP does not return result for a specific query when filtering on a managed metadata field.
ULS log:
The Uls logs provides 3 different messages that I could relate to every time the query is executed. The last item(level Medium) is displayed 14 times. For readability I've moved the ULS logs to the bottom of this question.
Query:
The query is as follows:
(I've translated this from dutch so pardon any typo's)
Query: (top selection) Display items from all sites in the site collection
ListType: Documentlibrary
Contenttype:
Items from this group:Custom Document Contenttypes
Items from this content type: Verklaring
Filter: Soort is equal to X
extra info: the field soort (Type) is a managed metadata field that was assigned the value X
Managed Metadata Structure:
-managed metadata service
-Contoso
-Enterprise Taxonomy (term set)
-Document (term)
-Verklaring (term)
-Soort (term)
-x (term)
EXTRA INFO:
When I modify the filter to filter on Title the CQWP DOES return the correct document!
When I modify the query settings to search a specific library the CWQP also does return the correct document! (In this case I am filtering on a managed metadata field).
QUESTION:
Why doesn't the CQWP return the document when filtering on a managed metadata field over the entire site collection.
Why does the CQWP return the document when filtering on a managed metadata field over a single library.
(The type of information the CQWP should return (Soort:x) is stored in a dozen document libraries!)
Here are the ULS logs.
Product: Web Content Management
Category Publishing
Level: Monitorable:
CrossListQueryCache::GetSiteData() caught exception (Microsoft.SharePoint.SPException: Kan deze actie niet voltooien. Probeer het opnieuw. ---> System.Runtime.InteropServices.COMException (0x80004005): Kan deze actie niet voltooien. Probeer
het opnieuw. bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns)
bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns) --- Einde van intern uitzonderingsstackpad
--- bij Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery,
ISP2DSafeArrayWriter pCallback, Object& pvarColumns) bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query) bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery
siteDataQuery, Boolean useSpQueryOnList) bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid)
bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList)) for query: '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}"
Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}" Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True"
Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True" Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef
ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}"
Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}" Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True"
Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True" Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef
ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}"
Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef
Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef
Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True"
Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' at url: /. Titel webonderdeel: Inhoudsquery
Product: Web Content Management
Category Publishing
Level: Warning
Error occured while processing a Content Query Web Part. Performing the following query '<ViewFields><FieldRef ID="{fa564e0f-0c70-4ab9-b863-0177e6ddd247}" Nullable="True" Type="Text"/><FieldRef ID="{94f89715-e097-4e8b-ba79-ea02aa8b7adb}"
Nullable="True" Type="Lookup"/><FieldRef ID="{1d22ea11-1e32-424e-89ab-9fedbadb6ce1}" Nullable="True" Type="Counter"/><FieldRef ID="{28cf69c5-fa48-462a-b5cd-27b6f9d2bd5f}" Nullable="True"
Type="DateTime"/><FieldRef ID="{1df5e554-ec7e-46a6-901d-d85a3881cb18}" Nullable="True" Type="User"/><FieldRef ID="{d31655d1-1d5b-4511-95a1-7a09e9b75bf2}" Nullable="True" Type="User"/><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime"/><FieldRef ID="{30bb605f-5bae-48fe-b4e3-1f81d9772af9}" Nullable="True" Type="Lookup"/><FieldRef ID="{ba3c27ee-4791-4867-8821-ff99000bac98}"
Nullable="True" Type="Text"/><FieldRef ID="{c5c4b81c-f1d9-4b43-a6a2-090df32ebb68}" Nullable="True" Type="Lookup"/><FieldRef ID="{8fca95c0-9b7d-456f-8dae-b41ee2728b85}" Nullable="True"
Type="Lookup"/><FieldRef ID="{39360f11-34cf-4356-9945-25c44e68dade}" Nullable="True" Type="Text"/><FieldRef ID="{543bc2cf-1f30-488e-8f25-6fe3b689d9ac}" Nullable="True" Type="Image"/><FieldRef
ID="{43bdd51b-3c5b-4e78-90a8-fb2087f71e70}" Nullable="True" Type="Number"/><FieldRef ID="{9da97a8a-1da5-4a77-98d3-4bc10456e700}" Nullable="True" Type="Note"/><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}"
Nullable="True" Type="Lookup"/><FieldRef Name="ScopeId" /><FieldRef Name="_Level" /><FieldRef Name="UniqueId" /><ListProperty Name="DraftVersionVisibility" /></ViewFields><Lists
ServerTemplate="101"></Lists><Webs Scope="Recursive" /><RowLimit>45</RowLimit><Query><Where><And><BeginsWith><FieldRef Name="ContentTypeId" Nullable="True" Type="ContentTypeId"/><Value
Type="ContentTypeId">0x010100C5FEE83B67FA6445B0C14AE8B7761BB8011E</Value></BeginsWith><In><FieldRef ID="{aea3cd20-8da0-4cb7-803b-5a33079a0e4d}" LookupId="TRUE"/><Values><Value Type="Counter">783</Value></Values></In></And></Where><OrderBy><FieldRef
ID="{8c06beca-0777-48f7-91c7-6da68bc07b69}" Nullable="True" Type="DateTime" Ascending="FALSE"/></OrderBy></Query>' generated the following error: Kan deze actie niet voltooien. Probeer het opnieuw.
at the following url: /. Titel webonderdeel: Inhoudsquery
Kan deze actie niet voltooien. Probeer het opnieuw. This is Dutch. It means something like: Cannot complete this action. Please try again.
Product: Web Content Management
Category Publishing
Level: Medium (this message is displayed 14 times)
ConsoleUtilies.GetContextualControlMode had no currentPage so the current SPWebPartManager mode cannot be retrieved.Hi,
while digging through the logging (again) I found some extra logging regarding the same correlation id (see details below).
We have a fairly large term store (4000+ lines).
If somebody has a clue or tip that would greatly appreciated!
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql. This can result in blocking in sql and excessive memory use on the front
end. Verify that no binary parameters are being passed as literals, and consider breaking up batches into smaller components. If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields. 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa43 High Slow Query Duration: 127.1515 1971313a-6baa-49e9-bace-d024ce67f25c
03-19-2014 13:49:51.87 w3wp.exe (0x2098) 0x23BC SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed: bij Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command,
SqlQueryData monitoringData) bij Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock) bij Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean
retryfordeadlock) bij Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) bij Microsoft.SharePoint.Library.SPRequestInternalClass.CrossListQuery(String bstrUrl, String bstrXmlWebs, String
bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter pCallback, Object& pvarColumns) bij Microsoft.SharePoint.Library.SPRequest.CrossListQuery(String bstrUrl, String bstrXmlWebs, String bstrXmlLists, String bstrXmlQuery, ISP2DSafeArrayWriter
pCallback, Object& pvarColumns) bij Microsoft.SharePoint.SPWeb.GetSiteData(SPSiteDataQuery query) bij Microsoft.SharePoint.Publishing.CachedArea.GetSiteData(SPWeb web, SPSiteDataQuery siteDataQuery, Boolean
useSpQueryOnList) bij Microsoft.SharePoint.Publishing.CachedArea.GetCrossListQueryResults(SPSiteDataQuery query, SPWeb currentContext, Boolean onlyPopulateCache, Boolean useSpQueryOnList, Int32 lcid) bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea
cachedArea, SPWeb web, SPSiteDataQuery query, Boolean useSpQueryOnList) bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(CachedArea ca, Boolean useSpQueryOnList) bij Microsoft.SharePoint.Publishing.CrossListQueryCache.GetSiteDataResults(SPSite
site, String webUrl, Boolean useSpQueryOnList) bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.IssueQuery() bij Microsoft.SharePoint.Publishing.WebControls.ContentByQueryWebPart.GetXPathNavigator(String
viewPath) bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.PerformSelect()
bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.DataBind() bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.EnsureDataBound() bij Microsoft.SharePoint.WebPartPages.DataFormWebPart.CreateChildControls()
bij System.Web.UI.Control.EnsureChildControls() bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Control.PreRenderRecursiveInternal()
bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Control.PreRenderRecursiveInternal() bij System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) bij System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) bij System.Web.UI.Page.ProcessRequest()
bij System.Web.UI.Page.ProcessRequest(HttpContext context) bij ASP.BLANKWEBPARTPAGE_ASPX_1653093133.ProcessRequest(HttpContext context) bij Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext
context) bij System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() bij System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
bij System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) bij System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) bij System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest
wr, HttpContext context) bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
flags) bij System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) 1971313a-6baa-49e9-bace-d024ce67f25c -
Second level detail in master-detail via VL does not return rows
Sorry, I did not want to repost the entire thread. Please see the last entry in the following thread for my urgent question.
second level detail in master-detail-detail does not return rows
"second level detail in master-detail-detail does not return rows"
Thanks so much!
TeriAhhh ... that explains everything!
You wrote:
ListView1
-> ListRowView2 (via ListRowFkLink1)
-> ListValueView2 (via ListValueFkLink2)
That's why I thought it's a master and two details.
But it's more like:
ListView1
-> ListRowView2 (via ListRowFkLink1)
-> ListValueView2 (via ListValueFkLink2)Is that correct?
That's the explanation.
A ViewLink is basically a RowSetIterator controlling a detail RowSet. When the iterator navigates, the detail RS is refreshed.
When you create a hierarchy in the wizard, the controlling master iterator is always the default iterator! But you used a new iterator (listRowIter) to iterate over your first detail. The default iterator of that first detail didn't move, hence the RowSet of your second detail was not refreshed.
When you navigate in the tester, the tester always uses the default iterator. That's why it worked there.
Sascha -
My PC does not return to the source document I print from
I had a setting control for
this in XP but can't find the page I got it from.<o:p></o:p>
<o:p> </o:p>
In ANY application or browser
this happens. I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from. This is maddening and causes all kinds of issues.
Searching the web for this now produces nothing and I know I can't be the
only person who experiences this.<o:p></o:p>
<o:p> </o:p>
This is a Windows 7 platform
in a networked business environment. I'm running the Classic Menu add-in
from Addintools because I can't stand the ribbon and have never liked it.
In Windows 7, I'm running a couple of other add-ins that restore the XP
use of the task bar properly so one can work efficiently.<o:p></o:p>
<o:p> </o:p>
None of the add-ins are what
is causing this issue because I'd run the same Classic Menu add-in on the XP
box and it had the same issue until I found the work-around that I can't
remember now.<o:p></o:p>
<o:p> </o:p>
Has anyone else experienced
this issue?<o:p></o:p>
<o:p> </o:p>
Jeff Lynch<o:p></o:p>Hi,
"I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from."
If I'm not misunderstanding, do you mean that the workbook is automatically closed after you print from that workbook, right?
As I know, if we use the default ribbon in Excel, no matter in Windows XP or Windows 7, the opened workbook should be stay opened after you print from that Excel workbook.
So the question is that: what is the version of office? What is the Classic Menu add-in you're running now? Did you manually download and install it to your system? Could you please share a picture with us about the add-ins you're using?
Yolanda Zhu
TechNet Community Support -
Very Very Urgent Issue: Restricted Key Figure does not return any data
Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any dataHi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW -
FM HRTRV_IF_GET_TRIP does not return USERDATA
Hi, it's me, yet again...
I'm using the FM "HRTRV_IF_GET_TRIP" in FITE_VC_GENERA_DATA in a post exit of comp-controller method "ON_SHOW" to get the structure/Table USER/PTK99 from the TE Cluster for binding to the context afterwards. At least that's the plan. The FM does not return me the data I expect in parameter USERDATA, although there is data in the TE Cluster and within the FM, I can see the global Table USER being filled whilst the macro RP-IMP-C1-TE. But this data is not further process neither is seems the strucutre USERDATA to be touched at any point of the FM. Am I calling the FM 'wrong' in any way? I'm close to making an implicit enhancement at the end and forcefully fill userdata from user....
Too long, didn't read: USERDATA is not returned filled --> WHY?
CALL FUNCTION 'HRTRV_IF_GET_TRIP'
EXPORTING
employeenumber = wd_assist->GS_COMMON_RFC_INPUT-employee_number
tripnumber = lv_tripno
* LANGUAGE = SY-LANGU
* CALCULATE_AMOUNTS = 'X'
* GET_TRIP_FROM_MEMORY = ' '
IMPORTING
* FRAMEDATA =
* STATUS =
USERDATA = ls_user " should contain cluster values, but it doesn't
tables
* RECEIPTS =
* ADDINFO =
* GUESTS =
* TEXT =
* MILEAGE =
* STOPOVER =
* DEDUCTIONS =
* COSTDIST_TRIP =
* COSTDIST_STOP =
* COSTDIST_RECE =
* COSTDIST_MILE =
* AMOUNTS =
* ADVANCES =
return = lt_bapiret " says method was executed successful
In the insides of the FM:
* IF CALCULATE_AMOUNTS <> 'X'. "XJY
* import the trip because it was NOT imported before
READ TABLE T_PERIO INDEX 1.
TE-KEY-PERNR = T_PERIO-PERNR.
TE-KEY-REINR = T_PERIO-REINR.
TE-KEY-PERIO = T_PERIO-PERIO.
TE-KEY-PDVRS = T_PERIO-PDVRS. " Once this line is executed, the global table USER is fileld with the data I expect
RP-IMP-C1-TE.
* ENDIF. "XJY
if t_perio-abrec = '0' or
t_perio-abrec = '1'.
clear te-key-pdvrs.
import beler from memory id te-key.
endif.
I hope somebody has ever used this one and can tell me what I'm doing wrong...
Cheers, Lukasgood to know. that you have already implemented similar thing. In our case if employee want to pick a manager he will only be given option from a custom table entries.
They way i was thinking was that there will be a checkbox that will say "Override Approver"
and when that will be checked text filed will be enabled with search help restricted to custom table entries.
I have one question. When I am enhancing FITE_VC_REVIEW and adding field in that view, I m finding it hard to track it. Looks like adding to General data screen will be much easier.
R u using ABAP memory to track field and use it at SMOD or you are using SAP memory ?
I am just starting on this one and not expert at webdynpros.. will ping you if i need any more help
and yes i just added following like in FM HRTRV_IF_GET_TRIP
read TABLE user INTO userdata INDEX 1
to get it to load userdata.. -
Search does not return my documents
Hi Gurus,
I have created few documents using CM SDK. I could able to see these documents using IFS browser.
Now I wrote content search method to search document content.When I search for "cmsdk" string it returns 13 documents.But when I search for a string in the document, I created , for example a text like "struts" it does not return any result , though this document I can see in IFS browser.What could be the reason?.
BTW I didn't create any FORMAT type while I am storing the document. Can any one point me to a document where I can find some instructions on "must and should things to do before search".
I am using CM SDK 9.0.3.
Thanks in advance.
Giri.have you set the indexing on?
Maybe you are looking for
-
Unable to start BI Publisher 11g
Hello Gurus, I have installed OBIEE 11G complete suite on windows machine. Immediately after installation and configuration, everything was running great. I was able to log into BI Publisher just fine. After I restarted my machine, suddenly I am gett
-
Low resolution albumart when connected to 'made for Ipod' ICE-systems.
I've recently installed a new stereo in my car. It is 'made for Ipod', and should therefore work great with my new Ipod Touch (3G) 32GB. And it does, in all ways but one. The albumart, shown on the stereo, looks really poor (with low resolution). I'v
-
SWF Banner works in Live View not in Any Browser? Losing my mind...
Hello, I'm not a pro but have some web building experience. I'm currently building a website for myself in Dreamweaver CS5. I made a simple flash banner where pictures fade in and out. I placed it into my template and it works fine in Live View but n
-
Many to Many relation ship not working
Hi Guys I have a allocation logic which allocates costs from multiple cost centers to multiple cost centers. The code that i have is this .. could you please check . I am on BPC NW SP02 version. Could you please advise if i am missing any thing are d
-
Position cursor in text field when form is opened
Another newbee question I'm afraid! I want to position the cursor in a text field when a user opens the form. I can't find a way to do it but I'm pretty sure it's straightforward! Also, can I remove fields from the tab order? Thanks (for your help an