WFO Virtualization and Co-res support?
Looking at the specs on the wiki…
If my customer has 2 C210 servers for all of his UC apps. Would it be supported to run the Base Server VM on C210 #1 and the recording server on C210 #2?
Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.2 in Unified CCX 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co-resident on the UCS platform with any number of other virtual machines running any other applications.
Cisco WFO Services supported for virtualization include the following:
Cisco WFM 8.5.2 – Complete system on one virtual server
Cisco QM 8.5.2 Base Server – All QM services except recording
Cisco QM 8.5.2 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording
http://docwiki.cisco.com/wiki/File:NotePencil.gif
Note:
No recording server is required for Desktop recording since recording is done by a service on each recorded user's PC therefore only the Base server is required.
Network(BIB) or Server (SPAN) recording must be on separate virtual or physical servers as the option for running these services co-resident on the Base server for a small number of these users is not supported on the UCS platform.
Virtualizing the Monitor server for Server (SPAN) recording is not supported on the UCS platform.
Hi,
Yes you have to install the Base server and recording server in different UCS platform.
http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX#Virtualization_Support_for_Cisco_Unified_Workforce_Optimization_.28WFO.29_8.5.2_in_Unified_CCX_8.5
========================
The following combination of VMs are supported for Cisco Unified Workforce Optimization (WFO) 8.5.1 in a co-residence deployment with Unified CCX 8.5 only:
Unified CCX and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM)
Unified CCX and Cisco WorkForce Management (WFM)
QM and WFM
Unified CCX, QM, and WFM
Cisco WFO Services supported for virtualization include the following:
Cisco WFM 8.5.2 – Complete system on one virtual server
Cisco QM 8.5.2 Base Server – All QM services except recording
Cisco QM 8.5.2 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording
Note:
No recording server is required for Desktop recording since recording is done by a service on each recorded user's PC therefore only the Base server is required.
Network(BIB) or Server (SPAN) recording must be on separate virtual or physical servers as the option for running these services co-resident on the Base server for a small number of these users is not supported on the UCS platform.
Virtualizing the Monitor server for Server (SPAN) recording is not supported on the UCS platform.
Hope it helps.
Anand
Similar Messages
-
LiveCycle virtual machine, Virtualization and support
Depending who you speak to, it is not clear whether or not the virtualization of Adobe LiveCycle in a Production environment is supported?
With the horse power required and cost of the underlying hardware to run LiveCycle, it would seem appropriate that Virtualization would be supported.
Can someone confirm that virtualization of livecycle is supported by Adobe in a production environment.?
If so, is proprietary hardware required? Or can any server hardware (respecting the minimum requirements) be used?
Is a specific VM software required or will any commercially available VM suffice?
Does any documentation exist? If so, where?
Thanks,st_bush wrote:
Yes my parallels 9 is now working on Mavericks. However in order to install Parallels 9 I had to delete my Parallels 7. And you are right it was an excel file and it is not on the new Parallels 9 desktop, but that is what it was saved to on Parallels 7. I realized now that I should have backed up my computer before updating it. But I just still had a little hope that I could maybe find that excel file.
Parallels is a program which creates an environment in which an operating system (usually Windows) can run on a Mac. The Windows virtual machine which the Parallels program creates is stored in your Documents folder (Documents/Parallels). When you run the Parallels 9 installer, it asks if you want to remove a previous version of Parallels (that appears to be optional), but if you do, the installer does that automatically; there's nothing that you have to delete by hand yourself. All that gets deleted is the old program (i.e., Parallels 7). Your virtual machine files aren't touched and should still be present in the Parallels folder inside your Documents folder.
What you're calling the "Parallels desktop" is actually the Windows desktop which appears when Parallels starts up Windows; you probably have Microsoft Office installed in Windows, which is what you used to create the Excel file. Assuming you didn't delete that Parallels folder inside your Documents folder, the Windows virtual machine should still be there, with the Excel file still on its virtual desktop. With Parallels 9 running, you should be able to open the Windows virtual machine that's in that folder and run Windows, and the Excel file should reappear. -
Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?Hi
To run Mouitain Lion you need to update Logic.
For the updaters to work the Logic application must be:
a) Within the Applications folder, and not in any sub-folder
b) Named "Logic Pro" with no extra numbers or spaces
CCT -
I didn't make a rescue e-mail and now i forgot the answers of my security questions!!' And the apple support contact wont open???
I'm not sure what you mean by the 'apple support contact wont open' (?). If you mean the 'contact iTunes Store support' link on the page that you posted from I've just tried it and it seems to wok ok for me, though I haven't gone as far as to actually contact them.
You can contact either iTunes Support or Apple to get the questions reset.
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps on the page that you posted from to add a rescue email address for potential future use, or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570 -
I think I have had enough. So its been a long time back and forth between me and you. Since I am not getting any solution and same thing you guys are providing me again and again.
I want to take a step back and list down a few things which have happened so far :-
I started chatting with the apple support on this issue starting September - please refer back to your chats on this Serial Number.
I have factory reset my phone like 20 times since then as each time they asked me to follow few steps which made me loose my data as your icloud doesn't work properly as stated by your customer care support people itself that sometimes the back up doesn't happen so please take back up at your laptop too.
Send phone diagnostics by clicking on a link.
reset your WIFI settings
Call apple support after 24 hours of observation.
Next day when same issue occurs then extreme Apology.
Take Back up on computer and Icloud both and contact apple support once its done
Call apple support again.
Factory Reset by erase all contents and setting options. Once one call back again.
wait and analyse for a whole day after setting up apple ID and data.
Wifi Issue stil exists.
Call apple support again
Between all this I had to explain the issue each time to a new representative. This above process I have gone through at least 7-8 times. Please go and refer your call notes.
So finally i got to know after escalating it several times and one of your supervisors told me that the issue is a hardware issue and it can only be replaced as they have tried it all.
Supervisor assured me that he has recommended it to be replaced in notes and asked me to visit a center.
I called in local distributor and set up an appointment, unfortunately couldnt make it. So call them to reschedule as I am working women so i dont have all the time in life to keep interacting with associate after associate so thought of walking in to an apple store near by and lodge a complaint. The supervisor updated me that I have warranty left and it will be replaced without any cost and also if i report and issue in warranty and if apple is not able to resolve it so the warranty stands true until its completely resolved after customer's consent.
I went in to give my phone to the tech support and they kept it for analysis and came back saying the issue doesnt exist. I was getting a disconnection in my WIFI every now and then. My Data plan was always used and i fortunately have a proof of that.
Customer rep told me talk to apple support and if they say we will replace it. One more place added where customer has to go.
Now and back to square one - They say phone is damaged - we cant replace it. First of all the phone is not damaged and you guys are just finding reasons to not replace a faulty phone.
It randomly disconnects and its listed as a known issue on your website too. had this not been listed i would have never thought its the phone. Then I started to observe that its the phone that makes a disconnection and not the WIFI connections as it was everywhere home, office and at friends place.
Best i can do is call you guys when this happens if you guys promise me that the tech employee of apple can come to whatever location i suggest at that point and do not be surprised if the phone behaves normal when the person arrives as its random.
Now you want pictures of my phone and you want to analyse further.After making an appointment and waiting over a week I was a few minutes late for my appointment I was told by apple I would have to make a new appointment. The shop was Chatswood in Sydney and the manager Mathew was very pathetic. I travelled 1 hour each way and was treated very poorly I must comment and say this was my first Apple devices and I will never understand how come people are buying these devices. The apps seem really good if only the hardware and the support could match. I really wish this manager all his best to Matthew in his next position somewhere else he obviously should not be in the position of managing an Apple store.
-
Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
MP3 and restricted codec support
hi,
finally I have my system set and running. I did go for the KDE4 which I like very much and followed all the steps as stated in the Beginner'S Guide.
However, I don't have MP3 neither other multimedia propietary format access like MP4, AAC, MOV, WMA, WMV or RMVB - I carry my multimedia collection of songs, videos and movies from when I was on WinXP (yikes!)- despite I installed Xine and other utilities as desccribed in the Beginner's Guide.
I do can watch some AVI files but can't access sound stream so they're muted. How do I add full multimedia support to my fresh shiny Arch? I did try to search the forums but there's to seem a problem because I keep receiving desconnections errors.http://bbs.archlinux.org/viewtopic.php?id=93862
Re: MP3 and restricted codec support
why did you opened a new thread instead of discussion in the previous one?
oops, I did it again, sorry! (yeah, I know you prefer Brtiney saying that )
I just did the same of my very first post: promise to don't screw things again and follow the rules.
@Bralkein: thanks for your tips and useful research, I will stick with xine until I backup my root, then maybe I try gstreamer.
@.:B:.: I have panic of installing things that can break my system, before installing Arch few days ago I came from an entire life in *buntuland, so you'll see : D
Last edited by martin77 (2010-03-27 05:10:09) -
There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?
If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O. -
License Rehosting for CUCM 8.5 to 9.1.2 Virtualization and Upgrade
No license rehosting is required for a jump upgrade from 6 or 7 to 9.1.2.
If you follow the same procedure for a 8.5 or 8.6 virtualization and upgrade - you virtualize your 8.5 or 8.6 software in a lab and then upgrade to 9.1.2 and cutover - do you need to rehost your licenses for the interim virtual 8.5 or 8.6 cluster before upgrading? I've seen this error:
"Upgrades are prohibited during Licensing Grace Period" error trying to move off the "Software Location" page.Hi,
The following link provides details of licenses usage by diff endpoints on version 9.x
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/uct/9_1_1/CUCM_BK_U0AE00F5_00_uct-admin-guide/CUCM_BK_U0AE00F5_00_uct-admin-guide_chapter_0100.html
HTH
Manish -
Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem
Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy -
I've downloaded the Creative Cloud app but the App tab says there is a download error and to contact support. I have tried uninstalling and reinstalling and am gettting the same message. I'm running OS X 10.9.3.
Blakey if you are receiving a download error then please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
i'm not able to purchase with itunes from the game clash of clans! I did it the first time, it worked, but now it wont work and says : contact support.
What they mean is iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html
-
ITunes for Windows, QuickTime, and Apple Application Support
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
*The relationship between iTunes for Windows and QuickTime for Windows*
Conceptually, you don't go too far wrong thinking of iTunes for Windows as a gigantic QuickTime for Windows plug-in. QuickTime for Windows provides the audio and video playback capabilities for iTunes for Windows, the codecs iTunes for Windows uses for importing and burning CDs, and so forth.
So, under normal circumstances, if you uninstall your QuickTime for Windows your iTunes for Windows will no longer launch. The exception is if you install a different application such as QuickTime Alternaltive, which also provides QuickTime playback capabilities. However, most such applications (QuickTime Alternative being a good example) are themselves built from actual QuickTime program files. So there's really no getting away from the requirement to have QuickTime for Windows componentry installed on your computer in order to get your iTunes for Windows to launch and run.
In addition to needing some QuickTime for Windows installed on the computer for iTunes for Windows, a given iTunes for Windows version will require *at mininum a particular version* of QuickTime for Windows to be installed on the computer in order for that iTunes for Windows version to run. For example, iTunes for Windows 5.0.0.35 requires at least a release version of QuickTime for Windows 7.0.2 to run correctly, iTunes for Windows 6.0.0.18 requires at least a QuickTime for Windows 7.0.3, and so on. The same applies for solutions involving other programs like QuickTime Alternative. An iTunes for Windows 6.0.0.18 would require an installed version of QuickTime Alternative to made from (at least) QuickTime for Windows 7.0.3 componentry in order for iTunes to run.
The most straightforward way to go about getting your iTunes for Windows launching again after you've uninstalled your QuickTime for Windows is simply to reinstall QuickTime for Windows. You can get the latest version of QuickTime for Windows XP, Windows Vista and Windows 7 from the following download page at the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
*The relationship between iTunes and Apple Application Support*
iTunes for Windows uses a number of the same program files as other Apple software for Windows (most notably, QuickTime for Windows and Safari for Windows). Starting with iTunes for Windows version 9.0.0, QuickTime for Windows version 7.6.4, and Safari for Windows 4.0.4, program files common to more than one of the programs have been stored in a single location: "Apple Application Support".
So, if you uninstall your Apple Application Support (using the Add or Remove programs control panel in Windows XP, or using Programs and Features in Windows Vista or Windows 7), your iTunes for Windows 9.0.0 (or higher version) will no longer launch ... because several essential program files for iTunes for Windows 9.0.0 (or higher version) will have been uninstalled.
At the time of writing this user tip, Apple Application Support is not available as a "standalone" download from Apple. It is only available as part of the installer bundles for the most recent versions of iTunes for Windows, Safari for Windows and QuickTime for Windows. So if you have uninstalled your Apple Application Support and your iTunes for Windows 9.0.0 (or higher version) is no longer launching, the most straightforward way of getting your iTunes for Windows launching again is to uninstall your existing version of iTunes for Windows and reinstall the latest version of iTunes for Windows. (The iTunes reinstall should also reinstall your Apple Application Support.)
[Latest iTunes for Windows version|http://www.apple.com/itunes/download>
If, however, you've uninstalled both your Apple Application Support and your QuickTime for Windows, the most straightforward way of getting them both reinstalled is to download the latest QuickTime for Windows installer from the Apple website. (Use the download link that doesn't mention iTunes.)
[Latest QuickTime for Windows version|http://www.apple.com/quicktime/download>
This is the 1st version of this tip. It was submitted on March 7, 2010 by b noir.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Only LiveCycle Data Services 2.6 and higher are supported.???
not sure if this is the right forum but I have flash builder with sdk 4.1 and I recently installed blazeDS turnkey and tried to set uo a new flex project with a J2EE server type.
However I get this message and am unsure what to do.
Only LiveCycle Data Services 2.6 and higher are supported.
Im trying to follow this tutorial
http://www.adobe.com/devnet/livecycle/articles/blazeds_gettingstarted.htmlCan you please try using the blazeds from:
http://opensource.adobe.com/wiki/display/blazeds/download+blazeds+4
Few articles which might help you:
http://balajisridhar.wordpress.com/2009/06/06/flash-builder-4-makes-a-new-marriage-proposa l-between-flex-and-java/
http://sujitreddyg.wordpress.com/2009/06/01/building-flex-application-for-blazeds-remoting -service-using-flash-builder-4/
Hope this helps.
Thanks,
Balaji S -
My iphone 4s suddenly displays images from Yahoo, Google, and Flickr at a low resolution. I have IOS 7.0.4. My phone camera works fine, but any web based photo content from Safari, Yahoo images, Google images, and Flickr all come in pixelated and low res. What's the deal?
It happened to me but later I figured out that cellular signal was not that great and so the Internet was very slow. It took me about 2 minutes to get the full resolution picuture on either of the app you've described. Try to get faster internet either by wifi or good signal and then check.
Maybe you are looking for
-
Mini DisplayPort to VGA Adapter NOT DISPLAYING ON EXTERNAL SCREEN
Hello! Mid 2012 MacBook Pro Processor 2.9 GHz Intel Core i7 Memory 8 GB 1600 MHz DDR3 Graphics Intel HD Graphics 4000 Software OS X 10.9.3 (13D65) I have a mid 2012 MacBook Pro, I have connected a Mini DisplayPort to VGA Adapter in order to watch
-
HELP! Overcharges--outside of US
I'm currently outside of US. I turned on my phone for about an hour because I didn't have wifi. I assumed the data would be used from the 2 GB that I had left to use for this month (which I haven't used at all so far). This is my first time using a U
-
My audiobook is for sale on iTunes, but iTunes is using the wrong "Preview" section. The section they used is the only 30 sec. in Spanish and the rest of the book is in English. How can I get iTunes to fix this?
-
Does multiple selection possible in the lists.
HI Everyone, in the t-list can we select more than one Element IF yes than how to do this. Thanks, Kashif.
-
I can't get links pasted into Safari 5.0.2. The link appears in the address but when I press enter it does not go to the link but just reloards the page, or does nothing in Top Sites. It goes to the address onlyif I add a space after the link.