WG111v3 Mac OSX 10.4 Driver

I am searching for the driver for my netgear usb wireless adapter. The box said it was compatible with mac OS X. However, the cd that came with it is for windows. Netgear's site only has drivers for OS X 10.5. Does anyone know where I can get WG111v3 Mac OSX 10.4 Driver?
Mac mini, Mac OS X (10.4)

Try this...
http://downloadcenter.netgear.com/en/product/WG111v3#searchResults
http://downloadcenter.netgear.com/en/Disclaimer.aspx?redirecturl=http://netgeard ownload.registria.com/single_page_registration?product[sku]=wg111v3&download_url =http://www.downloads.netgear.com/files/GDC/WG111V3/NETGEAR%20_wg111v3_MacOS10.4 _v1.0.0.0.zip

Similar Messages

Can not remove mac osx base system drive

Hi folks..
Just trying to do a complete clean install of Mountain Lion. I booted up from a USB and erased the Macbook hardrive completely.
However I see a second drive/partition below that says 'disk2 - Mac OSX Base system' and it's about 2 gigs in size. I want to wipe and delete this too so that I will have just one single partion but disk utility will not letr me even touch it.
The 'erase' and Security options are greyed out and inactive and there is some text to the right that says: "This is the start up partition you can not erase it".
I don't see how it can be a start up partition as it's only 2 gigs in size and the main 750 gig drive has already been wiped.
How can i get rid of this drive/partition completely?
Thanks.

That's Mt. Lion's Recovery volume which you could have used to erase the working volume and do a clean install of Mt. LIon. To get rid of it you may have to try to repartition the entire drive with Disk Utility.
Otherwise, reboot with the Command+R keys held down to boot into the Recovery volume. Once there run Disk Utility to again erase the working volume and then do an install of Mt. Lion. This method is much easier and quicker than doing it from the USB device.
OT

Reinstall Mac OSX on partitioned drive without losing Windows data

Several weeks ago, I used bootcamp to partition my mac so I could install Windows. I set aside about 20GB for Windows. I did it so that I could download a program I need to take the bar exam.
Everything worked fine for about a week. Then my "mac hard drive" started running slowly, freezing and crashing where I had to do manual restarts. The windows hard drive worked fine. Then, my mac hard drive quit starting up completely. It would freeze on the grey/blue screens.
Went to a mac store. The guy didn't know what to do (because he wasn't trained in boot camp) but told me I could try doing an install-without-erasing of Mac OS on the mac hard drive. I did this, and it helped, but did not solve the problem. It still froze/was slow.
Now, the Mac hard drive doesn't completely start up, it freezes after I enter my log in information.
I want to know the following: If I do a complete reset/reinstall of the mac OS on my mac hard drive, will it affect my Windows hard drive? I ABSOLUTELY CANNOT lose the program I have installed on my Windows hard drive. However, I am a bit nervous that if I don't take any action now, whatever problem is occurring may seep over into my Windows hard drive.
Any advice would be wonderful. Thanks!
Message was edited by: khiner
Message was edited by: khiner

you could use [Winclone|http://twocanoes.com/winclone> to clone the winsloth partition to an external, then erase your internal drive, reinstall OS X, have bootcamp assistant create a new partition for winsloth, and finally clone your winsloth installation back.
JGG

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

QUESTION.
Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
I am using a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading Iphoto ?
I hope that someone is able to help in this matter , as i have to restore 12000 photos !
Thanking you in anticipation.
Alan from Wigton

Hallo Kieth ,
I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
Thanks for your interest and advice.
regards - Alan

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive?

I have an iMac 5.1 with Mac OSX 10.6.8 and 2 GB memory and an L2 cache of 4 GB. lately I have been receiving error messages of " start up disk almost full; please delete files." is the start up disk the same thing as the hard drive? I opened the hard drive and from the column on the left of the menu I've selected "search for" and under that " all images" then "all documents" I've deleted a few files from each. Are documents and images that I have deleted from here also deleted from the folders on my desktop?

You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Delete any other mail in your Junk folders. Also, look through your Sent Mail to see if there is anything that can be deleted.
Other things you can do to gain space.
Once you have around 15 GBs regained, do a search, download and install OmniDisk Sweeper.
This app will help you locate files that you can move/archive and/or delete from your system.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

HP Laserjet 4 printer driver for mac osx 10.8.5

Anybody know of a mac osx 10.8.5 printer driver for a HP Laserjet 4?

Yeah, looked at this list earlier - they've got v. 19.8 for a Laserjet 4 Plus but mine is a plain Laserjet 4 so I doubt it would work. I used a Gutenprint driver v. 5.2.3 with Leopard that worked OK. Mountain Lion doesn't seem to like it as much...

Bought new Hitachi HD can't install Mac osx there is no destination drive and i already formatted to mac os extended journaled

So i tried upgrading my hard drive to a new hitachi HD and when i tried using the mac osx dvd it doesn't find the hard drive in the destination page. i formatted it to mac os extended journaled with 1 partition and nothing i'm stuck.... here is a picture of the disk utility page i took a screenshot of.... please help

"i tried upgrading my hard drive to a new hitachi HD"
Your havnt said what your trying to do so your posts are very confusing
with this new drive do you want to:
install the operating system on the new drive
format the drive to use it as storage
create a standby bootable drive
something else entirely
Your screen shots show you have an internel drive and three other drives
The drive you have erased is an external USB connected drive - youv erased and partitioned the drive and it shows it is working OK
what do you want to do now?
if the idea is to replace your original systen drive with this new drive youv bought the wrong kind of drive it should have been an internal drive
but you need to explain wahat as the drive shows it functioning correctly

Mac OSX wont reognise my internal hard disk drive

I have a problem where for some reason when I start up my Macbook Pro (intel core duo) it does not detect the internal hard disk drive at all. I have run a hardware test and it shows no problems whatsoever. I have tried resetting the PRAM etc and to no avail. Yesterday the system hung and I tried to force quit and it wouldn't do anything so eventually I held down the power key and when it tried to reboot this is the problem I was faced with (it would boot up with the "no entry" sign). I accepted complete defeat and went to completely re-install OSX however it doesn't even show the internal hard drive when I wait for it to give me install destinations. I had tried seeing the hard drive through disk utility however it only shows the install DVD and that's it in the sidebar. I resigned myself further to thinking either the logic board or the HDD had packed in all and I took it round to my brother in law to see if there is anything he could do without opening the machine (he is Oxford educated and writes programmes etc so is very knowledgable), now this is the part that has miffed us both, he started it up using a Linux disc and once running, Linux see's the hard drive with no problems. He has been able to access the HDD with absolutely no problems under Linux both reading and writing to it. I even took my Mac Mini round and he booted them both up in Linux and completely copied Mac OSX from the mini to the macbook pro but still when I try booting up its as if the HDD isn't even there. Why can Linux see the drive and not Mac OSX? Please don't be affraid to get very technical in your answers as they may mean nothing to me but will probably all make sense to my brother in Law. Any sugestions at all would be greatly accepted.

Dear mcdkev,
You guys may have made a big error cloning the Mini HD into the MBP. They both have very different drivers and hardware settings and their OS X versions are customized to fit the hardware. That is why each mac comes with it's own version of OS X and their backup disks. That's a reason why it did not work.
Ok, so now that you do not have any of the original info on the MBP try the following:
Use linux to scan the disk surface & repair any problems.
Reformat the drive as DOS or FAT 32. (I wouldn't go into any linux specific format unless you can "Apple" format it, which I don't think linux has that option.)
Now, the MBP should be able to see it's drive...
boot from the OS X DVD , from the Utilities menu choose Disk Utilities, partition the drive as GUI file system (in case the linux format made the drive a "system boot record", you do not want that... )
Then format the drive as "OS X Extended Journaled"
Now go back to install and install your original basic set of OS X (the factory default).
*If nothing works, please do take your MBP to the Apple store or to a certified tech before you do more damage to the drive and it becomes unusable ...*

How do you retrieve a Hard Drive on a mac OSX?

ok, here goes recently my Mac OSX froze so i immediately turned it off , so when i turned it back on the loading screen had a file with a Question mark on it, then i went to my room to get my Mac OSX installer Disc and i put in disc one and waited for it to load, when i started to install it and agreed to the terms it said select a destination Volume to install The Mac OSX Software but their was nothing to click for the destination and i have no idea what to do, for the past couple of days i have been utilizing my PS3 to use the internet which is also what i am using right now.
So can some one please help me out and tell me what to do i cant take it to Micro where i bought it because my warrentee has expired
please help me

It appears this particular Mac system has a hardware problem. The disk, the I/O controller (depending on the particular Mac box) or motherboard are the obvious candidates. Particularly given the installer and Disk Utility are not offering up any disks to work with.
You're now faced with the costs of having a repair service run some diagnostics, and/or swapping the drive or related component, up to replacing the particular Mac system.
Some Mac boxes are easier to swap drives than others. Depending on your familiarity with working on computers, you might first remove the drive out of the system and into a USB enclosure or such (about US$30 at various vendors), and see if the disk works over there. (If you're not comfortable or familiar with working inside a computer system, this might not the best time to learn. Accordingly, you might want to enlist a local Apple dealer or an Apple store.)
And how current are your backups? If they're not current, how much is your data worth? And if they're not current, don't re-install or otherwise damage your disk contents until you're sure you're ready to clobber your data.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all. Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac.

I have an external hard drive 1 TB - it says that 559GB has been used , but I can't see any files at all.
Is there a way to recover those files. I have a lot of photos on it. I have an IMac and running MAC OSX versuib 10.7.5 I am new to Mac, so I hope somebody can give me some advice.
Cheers

if it's ntfs microsofts filesystem then you need a windows machine to recover them

I'm trying to install Mac OSX on an external drive with my Mac Mini

A few days ago, I picked up my new Mac Mini. I'm using the install disk included with the Mini in an attempt to install Mac OSX 10.4.5 onto my external hard drive - a LaCie d2 200GB.
The installer knows the LaCie is there - but it won't let me install it there. I had no problem doing this with my last Mac (Power Mac G4). Does anyone have any suggestions?
Mac Mini Duo Core 1.66Mhz Mac OS X (10.4.7) LaCie d2 Firewire Hard Drive 200GB

If you are using an Intel mac mini you need to change the partition scheme. Without doing this the Intel Macs cannot boot from the drive.
To do this you need to open Disk Utility, select your drive (not the partition), then select the Partition tab. In there you'll see an Options… button. Click on it and change the partition scheme to GUID Partition Table. Click OK and then apply the reparitioning.
Please be aware that by making this change you will be able to boot your Intel Mac from the drive although a PowerPC drive will no longer be able to use the drive as a boot drive.

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections. Does anyone know their way around this obstacle? Thanks!

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

How do you know what version Mac OSX is on ANOTHER drive?

How do you know what version Mac OSX is on ANOTHER drive without starting that drive
and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I boug

Mac OSX 10.6.8 running Photoshop CS5. My hard drive went belly up. Installed a new one and then tried to install Photoshop from my backup. I get an error message 6 telling me to uninstall Photoshop and then reinstall from the original software. But I bought from Adobe online. How do I go about this?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

WG111v3 Mac OSX 10.4 Driver

Similar Messages

Maybe you are looking for