What 4SNS/1/40000001:lp6M-0.984 hardware error means?

What 4SNS/1/40000001:lp6M-0.984 hardware error means?

Hi - this is an Apple Hardware Test Result - anything under 1.000 is not passing so you should consult an Apple Service Provider about your Mac Pro.

Similar Messages

  • HT1338 4sns/1/40000001:tbit-0.000 hardware error - what does it mean?

    What does this hardware error mean?

    Hello, is the Battery removed from your MacBook?
    https://discussions.apple.com/thread/1791371?start=0&tstart=0

  • 4SNS/1/40000001: VPOR-0.592  Which could mean the error?

    4SNS/1/40000001: VPOR-0.592  Which could mean the error?

    Indicates a sensor on the logic board has failed. Make an appointment at an Apple store to confirm. You can also try an SMC reset, then run the Apple Hardware test again:
    http://support.apple.com/kb/HT3964

  • 4SNS/1/40000001: VPOR-0.970  Which could mean the error?

    4SNS/1/40000001: VPOR-0.970  Which could mean the error?

    Welcome to Apple Support Communities
    Did you run this test with the MacBook Pro plugged to the charger? If not, do that. It looks like the MacBook Pro wasn't plugged to the charger

  • What does "The System bootstrapper has crashed: Bus error" mean ?

    What does "The System bootstrapper has crashed: Bus error" mean ?

    Was this an upgrade?
    You could repair disk and permissions,  but I suspect a corrupt OS X.  I would reinstall the operating system.
    COmmand R on reboot if your Mac is newer.

  • HT203747 Anyone know what 4SNS/1/40000001:IDOR-0.000 means?

    Any ideas?

    Was the Mac connected to the power outlet when you tested the computer?
    If the Mac was connected to power and you get this error code, you have to contact Apple.
    Best.

  • Apple Hardware Test Error: 4SNS/1/40000001: IDOR-0.958 what's wrong?

    Hello
    i swapped SSD in MBA A1369 to an OWC 256GB, it worked well since 2 months until yesterday.
    When I opened screen to wake up, it showed only blinking folder with question mark so it couldn't find startup volume.
    SSD is invisible in Disk utilities and Apple Hardware Test shows: 4SNS/1/40000001: IDOR-0.958.
    I don't know what this error means, is it any way to repair it on my own?
    If not, memory seller will exchange item, but I'm asking you guys, before shipping.
    Thanks in advance

    Ask and ye shall receive reilogix...
    https://discussions.apple.com/message/18961331#18961331
    Your machine is absolutely fine. Run the test again with your power connected.

  • HT201257 Does anybody know what hardware test error code this is 4SNS/1/40000001: TCOH -1.704

    Does anybody know what hardware test error code this is 4SNS/1/40000001: TCOH -1.704
    Trying to track down fast running fan that will not reset and this error came up.

    only apple techncians have access to what those codes mean.  It is sensor related, but as it is a hardware problem, you need to bring it into an Apple store or AASP to have it correctly diagnosed and fixed.

  • HT201257 mac os x 10.4.11 tiger: apple hardware test has detected an error (what does this mean): 4SNS/1/40000001:VDOR

    Can someone help?  I did an apple hardware test and it has detected an error:  4SNS/1/40000001:VDOR
    What does that mean? Can i correct it myself? how?
    my computer is  "tiger" mac os x 10.4.11, Processor: 2.16 GHz Intel Core 2 Duo,  Memory: 2.5 Go 667 MHz DDR2 SDRAM

    Thank's for answering, realy appreciate your time,
    A technician had installed last year "mac os x snow leopard 10.6" (family pack) at around $49.00 - I had originaly mac os x 10.4.11 (tiger).  He had changed my hard drive, added memory: 2.5 Go 667 MHz DDR2 SDRAM, processor is: 2.16 GHz Intel Core 2 Duo  (he told me he had to change my hard drive probably due to a power shortage. Before he did the changes, I had done a hardware test: it gave me the same error as today 4SNS/1/40000001:DVOR,  He cleaned the inside, but he did not change any sensors. What am i to do???
    Not too long ago i started having problems. (probably from a power shortage, at one point.  I don't know if my external back up got corrupt. so i don't want to use it. He had eraced tiger 10.4.11 and installed snow leopard 10.6.
    I eraced snow leopard and installed mac os x 10.4.11 (that came with my computer).  
    I wanted to install mac os x 10.6 (snow Leopard) without eracing tiger (chat sites say you can do that) but it said it couldn't use my hard disk because of my memory:  my info says: used: 18,78 Go on the disk, available: 446.66 Go, Capacity: 465,44 Go
    So that's when i did a hardware test with the CD1 of mac os x 10.4 (tiger) and that where i got the message.
    If i have a sensor problem, then i guess i'm waisting my time trying to reinstall mac os x 10.6 (snow Leopard) or am i doing it wrong.  I was told i could leave tiger there and upgrade directly to snow leopard, without installing mac os x 10.5 (leopard).  
    Thank again

  • MacBook won't boot after trying to repair with Disk Utility. Cannot boot in Safe Mode. Just powers down after about 5 minutes. Apple Hardware Test says error 4SNS/1/40000001:IG0C-0.265 But I cannot find anything on the net about it. MacBook 4,1 Intel.

    Hello Everyone,
    I am in dire need of assistance I am hoping someone could provide. I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
    I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
    I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
    Any suggestions are welcome and appreciated.
    Thank you for your time.

    You've a couple of issues .... when Disk Utility tells you it can't repair a drive, if the error is a soft error, like an invalid tree or node, Disk Warrior (or TechTool Pro) can handle it. However, if Disk Warrior (or TechTool Pro) can't handle it, you can erase and write zero's to the hard drive and restore to it, or you can buy a new hard drive. Sometimes running SMART Utility can provide additional insight into the health of the hard drive. 
    THe 4SNS error is a sensor error.  You could install iStat Pro to see if something is indeed getting too hot or remaining room temp or less.  You may need to take it into an Apple shop so they can use their thermal diagnostics to test and isolate it further.

  • Hardware error 4SNS/1/40000001 TB0T-9.597 MBP early 2013

    My 15" retina Macbook Pro OSX 10.8.5 suddenly went black - seems as if it is shutting down the screen, including an external monitor connected via mini-display port.  This happened suddenly with no particular reason and repeated in different configurations, on mains and on battery.   I was afraid the graphics hardware had completely quit but it seemed temperature related.  After a few minutes it would start for 2 or 3 minutes then sleep.   Without the fan going on and not particularly hot, it seems to be going into sleep.  Even cool, I had to put it in the freezer to get it to complete a basic hardware test.
    Can anyone help me understand what error 4SNS/1/40000001:TB0T-9.597 means? 
    I suspect it is a temperature sensor?  Is this repairable?  The machine is 14 months old and apple wants over $50 just to talk to me on the phone.  I have tried setting "sleep" to never in the Energy Saver settings, resetting the PRAM etc. It will start in safe mode.  Hopefully I can keep it cool enough to get it through a detailed hardware test and get more information...
    I have 4 different MacBooks and I've never seen this.  Any help would be much appreciated.

    It is a sensor error. It is repairable: make a Genius Appointment and take it in for service. Do this ASAP to prevent damage to the computer.

  • Hello. Apple hardware test has detected an error. 4SNS/1/40000001:TN1D--1.000

    Hello. Apple hardware test has detected an error. 4SNS/1/40000001:TN1D--1.000  Anyone knows what that means ? OS doesn't boot. Maybe it's hard disk error ?

    It means your screwed if you're out of warranty.
    That error translates to your northbridge temperature sensor is bad- BUT IN MAC "GENIUS" LAND, that means you either need a whole new logic board (a $700 part) or buy a new MacBook. On the non-unibody MacBook pros, you could have came to my store and spend $75 and had a working computer the same day- this is no longer possible on the unibody MacBooks.
    WHY, WHY, WHY?
    In a bold design move, Apple decided to SOLDER the thermal sensors to the logic board (along with many other components such as the video, graphics and IO), thus rendering these parts NON-SERVICEABLE by us independant technicians. Apple's reasoning is that they can "make their notebooks thinner", but why sacrifice performace for asthetics? Who cares, buy a new MacBook.
    WHO NEEDS TEMPERATURE SENSORS?
    It doesn't matter if your laptop is running hot or not, when a temperature sensor goes bad on a Mac, it shuts your computer down to prevent further damage. Apple was the first company to implement this "failsafe", now PC motherboard vendors are following suit after watching Apple's stock soar. What this means: Is that you could actually have a perfectly functioning MacBook except for one thing; the little guy who's sole purpose is to report whether it's not the computer is running hot or not has decided to not show up for work, so they closed up shop. If you ask me, it's the equivalent of a restaraunt closing on account of not having a dishwasher- but that's just the opinion of an ex-certified ACMT and what do I know- I'm not a "genius" or anything.

  • HT3964 Hardware test error 4SNS/1/40000001:TN1D--1.000. meaning

    I have some problems with my Mac Book Pro 7.1,
    It freezes after starts up or while functioning and I have to force the shut down.
    I run the Hardware test and it reports the following error 4SNS/1/40000001:TN1D--1.000.
    Could anyone tell me this kind of error what does it mean?
    Thanks,
    Serena.

    Welcome to Apple Support Communities
    This error is showing a problem with the logic board controller sensor. The only thing you can do is to take your computer to an Apple Store or reseller to have the computer repaired. Read > http://reviews.cnet.com/8301-13727_7-57352461-263/how-to-invoke-and-interpret-th e-apple-hardware-tests/
    Did you run Apple Hardware Test with the charger connected? If not, connect it to the charger and run Apple Hardware Test again

  • What does error code 4sns/1/40000001: IDOR-0.000 mean?

    I have a MacBook Pro modWhat does error code 4sns/1/40000001: IDOR-0.000 mean? My video display is partially striated and I ran the self test a few minutes ago.el 10,1 with an NVIDIA Ge ForceGT 650M graphics card with 1GB of VRAM.  When I turned on my laptop this morning the right 1/3 of the screen was black with red and multicolored lines, I had to reduce my window view to see the document I was looking at.  I rebooted several times and ran the hardware test recommended.  The results indicated an error, the code: 4sns/1/40000001: IDOR-0.000.  Can anyone decipher the code and tell me what is wrong?
    thanks

    That error code indicates a DC current anomaly.  A visit to an Apple store genius bar is your best option.  They should be able to specifically isolate the problem and and advise you of your options.
    Ciao.

  • Bluetooth failure - hardware error 4SNS/1/40000001:TB1T-0.000

    I was installing updates in my computer and suddenly the bluetooh icon started to fail, I noticed that a red led was on (in the mic input), but after restarting it was off, I tried the hardware test and I got the error 4SNS/1/40000001:TB1T-0.000, so I also tried:
    - Reseting PRAM & NVRAM
    - Reseting SMC
    - Deleting the com file of the bluetooth in the Library folder
    But the hardware error is the same, I also noticed that when I test the stereo sound the left speaker volume is very low.
    My computer is still with guaranty so I'll request the replace of the bluetooth chip and speakers.
    Don't waste your time if you did the hardware test and you receive this error message, none of the soft advices you'll find in this forum will work, just replace.
    What I'd like to know if it is better to send the computer or the replace the chip by myself, I saw some youtube videos and it looks very easy, and honestly I don't like how the technical service treats the computers.
    Thanks in advance for the advice,

    Dear all, after some reboots, and honestly I don´t know which of the previous soft advices was, but my bluetooth is now working.
    Just as a extra comment, the mighty mouse bluetooth is the best i ever had, works for Windows Vista better than in OS X. This genius idea of having the right and left button options in one button is very awesome.
    Apple 1 , Microsoft 0

Maybe you are looking for

  • HP Envy m6 - getting error while recovery of my OS. Detect some error during PININST_BBV

    I am receiving the following error while reinstalling my OS using the HP recovery Discs. I get this window with no close button except for Save , Details or Retry. [ 2:37:49.82] ChkErrBB.CMD : Detect some error during PININST_BBV. [ 2:37:49.82] ChkEr

  • No midi clock out on AMT8 ports 4-8

    Hi, Logic 9, with daisy chained Emagic Unitor8's and AMT Unitory8->Unitor8->Amt8 I"m getting midi clock out on all ports except the last 4. Does anyone have a suggestion on how to make this work or if it is even possible? - Joel

  • Moving row in Jtable

    Hi, what i want is to move row UP and DOWN. I have my own Abstract table model. Im looking for the easyest way to do this. public void moveRow(int i, int j){     Vector v = new Vector();     v = (Vector)data.get(j);     data.add(j, data.get(i));    

  • How can I shorten the gap between songs?

    I have this awkward gap in between songs. Crossfade is ridiculous and doesn't shorten the gap. Any way to get one song to fade into the next with no silence?

  • App Error 606 ~ Please Help

    Just upgraded to OS 6.0. Deleting unwanted mailboxes > asked to update Email Set Application > did so > BB dies with message...App Error 606, Reset. What to do?