What about 3rd party cloud storage file access via bridge?

First of all, lets all agree to get some training to the help chat lines.  Inder was one I was chatting with and as I was typing another challenging question to the just down stupid answer I got being treated as an idiot, he or she cut me off, closed the chat and stated thank you for using Adobe chat support.  I guess the stats on how fast you deal with an issue is far more important than proving a viable service Adobe.  YES I AM F!@#$%G MAD.
So I found out that Bridge went out of their way in development  to stop me from organizing and or just opening files from DropBox. All I wanted to do was conveniently open a JPG in RAW for some preliminary editing before bring the file into Photoshop CC. A feature that Adobe has been ranting and bragging about for a while.  When I tried this GREAT feature in Bridge as it were, I could not even open the shortcut to the folders where I store my photos in the cloud DropBox. When I persisted, Bridge eventually crashed.  I am sure that was some easy code to put in there to teach me a lesson for not buying Adobe cloud storage.
So, after had spending 1000s and 1000s of dollars on Adobe products over the last 20 + years, I get treated as an idiot, an undereducated consumer, no respect and have to adhere to timeline restraints to meet a undereducated / under-trained so called specialist stats she he she won't get reprimanded or loose their job.  
So here is my knowledge to the issue at hand.  I can not navigate Internet Based Cloud services without having to download them to my desktop first using Bridge CC.  Thus rendering this app useless when most if not all project files are on the cloud.  (Using the cloud makes so much sense in my case as a collaborator, project lead - manager, teacher in the arts of multimedia and a professional photographer).
Seems like there is no solution from Adobe, so my question to the forum is, what apps are you using to get around this issue.  Adobe doesn't deserve my loyalty anymore and must EARN IT BACK! Third party solutions free or otherwise is welcomed.
Signed,
I am FED UP compromising my needs to suit your greed.
Brian Muntz

First of all, lets all agree to get some training to the help chat lines.  Inder was one I was chatting with and as I was typing another challenging question to the just down stupid answer I got being treated as an idiot, he or she cut me off, closed the chat and stated thank you for using Adobe chat support.  I guess the stats on how fast you deal with an issue is far more important than proving a viable service Adobe.  YES I AM F!@#$%G MAD.
So I found out that Bridge went out of their way in development  to stop me from organizing and or just opening files from DropBox. All I wanted to do was conveniently open a JPG in RAW for some preliminary editing before bring the file into Photoshop CC. A feature that Adobe has been ranting and bragging about for a while.  When I tried this GREAT feature in Bridge as it were, I could not even open the shortcut to the folders where I store my photos in the cloud DropBox. When I persisted, Bridge eventually crashed.  I am sure that was some easy code to put in there to teach me a lesson for not buying Adobe cloud storage.
So, after had spending 1000s and 1000s of dollars on Adobe products over the last 20 + years, I get treated as an idiot, an undereducated consumer, no respect and have to adhere to timeline restraints to meet a undereducated / under-trained so called specialist stats she he she won't get reprimanded or loose their job.  
So here is my knowledge to the issue at hand.  I can not navigate Internet Based Cloud services without having to download them to my desktop first using Bridge CC.  Thus rendering this app useless when most if not all project files are on the cloud.  (Using the cloud makes so much sense in my case as a collaborator, project lead - manager, teacher in the arts of multimedia and a professional photographer).
Seems like there is no solution from Adobe, so my question to the forum is, what apps are you using to get around this issue.  Adobe doesn't deserve my loyalty anymore and must EARN IT BACK! Third party solutions free or otherwise is welcomed.
Signed,
I am FED UP compromising my needs to suit your greed.
Brian Muntz

Similar Messages

  • 3rd Party SIP phone to CUCM via SIP Proxy

    Hi all,
    This is the scenario i'm currently working on :
    3rd party SIP phone <--> Internet <--> SIP Proxy <--> LAN <--> CUCM
    The SIP proxy basically terminates everything (REGISTER, INVITE, etc), including the RTP stream.
    I can register the 3rd party SIP phone to CUCM and in CUCM and  i can see SIP Proxy IP Address as the registered address of the phone.
    Calls from the 3rd party SIP phone to internal Cisco or internal 3rd party SIP phone and vice versa work like charm.
    The only (fatal) problem is i can only register 1 3rd party SIP phone to CUCM via this SIP proxy.
    Since this SIP Proxy always use its internal IP Address and port 5060 (TCP) as its source of registration, CUCM sees multiple registrations for multiple extensions (users) come from a single IP and port, and rejects the second registration request.
    It seems that CUCM binds a digest user to an IP address and port, therefore cannot accept multiple registrations from a single IP and port.
    Can anyone clarify this?  Or is there any way around this?
    I'm using CUCM 8.6.2 and CUCM 9.X (both do not work).
    Regards,
    Christian

    This is most likely because of the following...
    Because third-party SIP phones do not send a MAC address, they must identify themselves by using digest authentication.
    The REGISTER message includes the following header:
    Authorization: Digest username="xxxxxxxxxx",realm="ccmsipline",nonce="GBauADss2qoWr6k9y3hGGVDAqnLfoLk5",uri="sip:172.18.197.224",algorithm=MD5,response="126c0643a4923359ab59d4f53494552e"
    The username, xxxxxxxxxxx, must match an end user that is configured in the End User Configuration window of Cisco Unified CallManager Administration. The administrator configures the SIP third-party phone with the user; for example, swhite, in the Digest User field of Phone Configuration window.
    See the following document.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmcfg/b09sip3p.html
    Also Try this bug CSCef88775

  • Are there any 3rd Party Cloud Application Readiness Assessment tools in the market today?

    I have couple of interrelated questions here:
    1
    Are there any 3rd party tools, which do Cloud Readiness  Assessments for on-premises Applications. I am looking for names of any such tools, if they exist, which thoroughly analyse on-premises applications, and generate detailed reports on whether the
    application is ready for moving to the cloud (and why?), or if it needs some changes before moving (which changes?), or if the application needs major changes (which?) or cannot be move to cloud in its present form. The cloud here could be Azure (1st pref)
    or AWS (2nd pref).
    2
    From the tools named in response to above questions, which are the ones which can be used for doing applications assessments for a large number of on-premises apps in most efficient way? Do such tools actually exist? Imagine scenario that an enterprise customer
    comes to me and asks that they want to check the cloud readiness for 3000 applications in shortest possible time - What tool will you recommend for such massive assessments?
    Thanks, LH

    Hi,
    I would suggest you to check this Microsoft Cloud Self Assessment Tool.
    For more information on this, refer this link:
    http://blogs.technet.com/b/schadinio/archive/2012/07/09/microsoft-cloud-self-assessment-tool.aspx
    Regards,
    Azam Khan

  • What are 3rd party plug-ins?

    I always hear people talking about using 3rd party plug-ins in logic but I dont know what they are I have tried looking on the net but cant seem to get a straight answer.I know logic does not support VST plug-ins so are they just the AU plugins you can install in Logic or something completely different please can someone set me straight thanks.

    3rd party (non Apple) Plug Ins can be anything from processing effects to Software synths, samplers, romplers whatever. The AU Plug In format is what Mac's can handle without using VST wrappers. Some users do use VST Plugs with wrappers in Logic but as there are so many AU Plugs out there there is no real need to do so unless you want to use a specific Plug which is only available as an AU Plug In.
    Check the KVR Audio site, they have the best compilation of free and commercial Plug Ins on the net:
    http://www.kvraudio.com/allpluginsononepage.php

  • Album art download spotty at best, what best 3rd party tool works well?

    I have hundreds of Gb of music and probably 40% of that - no cover art.  Running this feature in iTunes does nothing - comes up telling me I have over 5,000 album art covers not able tgo be downloaded.  Tried various other 3rd party tools, not that many work well.
    Can anyone recommend one that works well?   I'm not sure why this feature works so unreliably.  I can find most of these albums on Amazon and can apply the art manually.    It should use some kind of fuzzy logic to guestimate the darn title and bring it down I would think.
    Thanks

    Hello Mdolla650,
    The official release date for The Sims 4 is 9/2/14. We are currently working to update BestBuy.com to reflect that date and hope to have that up soon.
    Thanks for posting!
    Matt|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Question about 3rd party Plug-ins....

    Is it just me or does Logic have some SERIOUS issues with 3rd party AU? For example, I can run Logic with all its own plugins and instruments just fine but the second I go to use my FM7, Novation Bass Station, or impOSCar I start experiencing bugs, crashes, etc... I have the latest drivers for these items, but they just don't seem to want to work well with Logic. Anyone else have this problem or know of a better way to use 3rd party plugins like this more safely in logic? Like maybe installing them as VST's instead of AU and putting them in a VST wrapper for Logic? It's honestly almost impossible to work with any of these devices in Logic for me without causing continual crashes!!

    why to pay for software then you can have a real thing?
    i pay only for hardware cos software is never good it not worth more than a few bucks. I have imposcar and vstation and they work just fine i use vstation alot never had a crash. are you sure that there are these au's for tiger?

  • Sync fail - files accessed via app always older versions

    Hi, I have a 2TB My Cloud device and various Android devices running the My Cloud App. I have the app set to auto-sync every 120mins however when accessed via the app my files are always older versions, often by a couple of months. The time stamp suggests sync has occured but when I open the file it is clearly an older version.  No other error messages or obvious issues. Any ideas? ThanksStuart

     
    Welcome to the WD Community,
    If you access the drive directly from a pc, are you able to see the recent versions of the files?
    Have you tried reinstalling the app?

  • Hooking file access via a driver

    Hi all,
    I would like to write a driver in such a way that all file access to a media containing a ufs file system goes via my driver.. ie in the NT scenario its a filter driver... how do i do this in solaris 7.. can i write a driver which is just above the disk driver and catch all the i/o operations like read / write....
    gurus any idea how to proceed about this... any help is really appreciated...
    thanks
    azad

    This maybe possible to build a virtual driver which sits to map
    into the actual solaris disk driver layer (sd driver). Start with bp_mapin()
    manpage and DDW (Solaris Device Driver Writing) manual (http://docs.sun.com) and get more info on the bp_mapin() usage.
    Hope this helps.
    Hae
    Sun Developer Technical Support

  • Problems with third party package and file access

    I am using a third party package that allows me to decode
    multipart forms that I use to upload files to our server.
    I have been able to write my own code (JSP) that both reads and
    writes to our filesystem. However, when I try to upload a file
    using the third party package the method I am using fails with
    the following IO exception: The error message is "access is
    denied." But the files get written and are usable (even binary
    files). I have checked the directories and all the dirs I am
    writing to have read, write and execute permission.
    I have access to the code so when I duplicate the actual
    methods used for writing (FileOutputStream.write(foo)) in my
    JSP, it writes fine without exceptions. In fact, I use
    FileOutputStream.write() in other code and it works fine. My
    question is: why would FileOutputStream work in packages we have
    developed and not in a third-party package. I have added the
    codebase and filePermissions to <weblogic_home>\weblogic.policy
    without any changes.
    I am running WLS 5.1 and NT 4.0 with SP5.
    Does this problem sound familiar to anyone?
    thanks for any and all help,
    saulj

    HI Mike,
    If you have third party Document Management System, then you can post two different message, i.e. service order in transaction details of the third party tool with link to document which would be posted to third party Document management server.
    If you don't have third party document management system and what to use sap infrastructure, then you don't need to maintain attachment, maintain the link between the third party tool and SAP document repository, with some login utilities.
    Best Regards,
    Pratik Patel.
    Reward with points if it is of any help to you!

  • Cannot open my photos in 3rd party apps by file menu- open file command

    iphoto08 prevents me from opening my photos in ANY application by way of the file menu' 'file open' command located on the apple bar at the top of the screen..
    the only work around i can find for this issue is to have iphoto open and drag each photo i want to use from iphoto into the 'file open' dialouge box in another program. or drag the photo from iphoto onto the desktop.
    DOES ANYONE KNOW OF ANOTHER SOLUTION?
    I HATE IPHOTO 08- I WANT ACCESS TO MY PHOTOS LIKE IN PREVIOUS VERSIONS !!!!!!!!!!!!

    This is the most ask question - a quick search would turn up many, many, many answers. For TD's comprehensive discussion see -- http://discussions.apple.com/thread.jspa?threadID=1143631&tstart=15
    The short answer is that Apple has made the library a package to protect it from damage.
    Old Toad has a back up script to backup your library on your local disk
    For e-mail the best way is to configure MAIL as your mail client if it will work for your service (it does work for many), select the photos you want and click e-mail to generate an e-mail to send
    For editing you can set iPhoto preferences to use a third party program to edit photos.
    So there are Many solutions depending on what you are trying to do.
    Larry Nebel

  • I want to be able to access my main computer when I'm away from home. Are there honest and trusted 3rd party applications that allow access to the home computer when I'm traveling?

    the job takes me away from home and at times I need information stored on the iMac. I would like to access the main computer and its files through a second computer, Mac Pro. Is there a service that will allow me to access my main computer when I'm traveling? For example if I'm in Brasil and need to access files found in my main computer in Canada, what reliable allows me to connect between the 2 computers?

    Yes,
    http://support.apple.com/kb/PH10618?viewlocale=en_US
    other ways:
    http://www.macworld.com/article/1152611/remoteaccesintro.html

  • Can't mount 3rd party DAS storage and Xsan volume simutaneously

    Xsan client(MacPro) equipped an Apple FC HBA card can't mount SGI TP9300 DAS storage and Xsan volume simutaneously when powering on or restarting.
    Among 2 FC ports, one port is used for Xsan volume using Xserve RAID, and the other port is used for SGI TP9300 storage which is directly connected to that Mac.
    When booting, Xsan volume is always mounted normally, but SGI TP9300 volume is not.
    Sometimes TP9300 volume is mounted about 20~30 minutes later.(I attached system.log file)
    The LUN of TP9300 is seen at Disk Utility, so it's not physical problem.
    It seems that actual volume information is not correctly processed at booting time.
    While, after booting the system with the FC cable for TP9300 disconnected and confirming that Xsan volume mounted normally, then connecting the FC cable for TP9300, the TP9300 volume is mounted immediately.
    Mac OS X 10.4.8, Xsan 1.4 is being used.

    Yes, I think you screwed your xsan volume. You can not remove luns from pools, and you can not remove volumes from volumes.
    How important is your existing data? In your case I would concentrate on that. This is not trivial. Theorotically you have lost your data allready. In practise you might have luck.
    Once I was in your kind of twilight zone, and managed to keep the data. It is a complete cli job. You have to be very carefull about with your config files. You could hire an experienced xsan consultant. If that is not possible, read the manpages very carefully before doing anything on the volume.
    Regards
    Donald

  • What is the best cloud storage solution to free up space on an iPad?

    My elderly parents use an iPhone and iPad as their only computers.  They have hit their space limit for their 16 gb ipad because of photos and home videos.  They don't have a computer to download photos to. 
    Have you used a cloud solution to get files off the iPad? What do you recommend and why?
    Thanks!

    Welcome to the Apple Community.
    Dropbox has an automatic camera upload and comes with free space, but there are others.

  • Docus about  3rd-party defined integration scenario: SAP Web AS u2013 SAP NW

    Hi all,
    we have an SAP integration solution which we want to get certified. We are interested in the third-party defined integration scenario: u201ESAP Web AS u2013 SAP Netweaver Application Serveru201C as similar products have this certification. Where can we find technical details/documents about this certification. Is there any sample scenario for this certification that we can use as a template.
    Thank you in advance for your help.
    Cheers
    Jack

    Dear 'jackwhite',
    The SAP Integration and Certification Center (SAP ICC) has confirmed Uphantis ([http://www.uphantis.com]) as its first u2018SAP Certified in Integration Servicesu2019 partner within the EMEA region. SAP AG has certified Uphantis as its Consulting and Certification Service Partner for Independent Software Vendors. This certification enables Uphantis to implement and supervise the integration of ISV software with SAP solutions. The ISV will then be able to have this integration certified by SAP (u2018SAP Integration Certificationu2019).
    Uphantis Integration Services ([http://www.uphantis.com/uis]) is an integration specialist with extensive knowledge in this field. Uphantis integration consultants have been trained by SAP and are certified in many different areas of expertise. This makes Uphantis a unique consulting partner, well acquainted with the requirements for developing an SAP certified solution.
    Perhaps we should get in contact?
    Best Regards,
    KENNY VAN SLEUWEN 
    Senior Integration Consultant
    Uphantis Integration Services
    'SAP Certified in Software Integration Services'
    I www.uphantis.com/uis
    Uphantis | Connecting our future

  • At what time does Creative Cloud unlock for access tomorrow?

    I'm in the UK, all I know if my order for a years Creative Cloud has been recieved, I need this for work when will in unlock tomorrow?

    Muse and Edge Preview are the only two left to install that are not included in the Master Collection.
    You can compare between here http://www.adobe.com/products/creativesuite/mastercollection.html and here https://creative.adobe.com/apps.

Maybe you are looking for