What about Muse when I am travelling?

I plan to travel for a few weeks, and taking my laptop with me.
I have started a Muse project, which I expect will be ready in about 1 week, - So I hope that I can do this Muse site alive when I'm out and travel to another countries?

Hello,
Yes you can use Muse when travelling. To get the site live you just need internet connection to upload it to Host.
Regards
Vivek

Similar Messages

What about interlacing when using Flip video in a DV sequence?

Hi, I want to include 720p 30fps Flip camera shots in a 50i 25fps DV PAL sequence that needs to remain interlaced for broadcast. I've seen info how to convert Flip for use in FCP7 but what are the interlacing issues - if any - when I'm combining Flip and DV shots in a timeline when I come to export a quicktime file?

The only real issue is how you're going to match the aspect ratio of the downscaled 720p material with that of the PAL. Letterbox the PAL, crop the 720p?
The conversion is easy enough in compressor with Frame Controls on. Just set the Output Fields to match those of the PAL, Better or Best Deinterlace quality.
Change the frame rate in the encoder panel, and the resolution in the Geometry Panel. Back in Frame Controls, set the Resize filter to Best.
All of this should be done with a ProRes LT setting on the clips.
In FCP, be sure your Sequence Settings match your clips.
You can also convert the PAL material to ProRes, or just let it render to that when exporting the sequence to Quicktime.

HT5860 What about if when I start up my MacBook Pro it makes 3 short beeps 3 long beeps and 3 short beeps. Or is that the same as 3 long 3 short 3 long?

The screen does not turn on and makes 3 short beeps 3 long beeps and 3 short beeps again then turns itself off. Well I just tried to turn it on again and now there are no more beeps but instead just a black screen. The LED light in the front of the laptop is on and not blinking. Does anyone know what be wrong with my laptop?
Also this is a 2010 model I believe

Read this:
http://support.apple.com/kb/HT5860
Ciao.

OsX Clean Install - What about Bootcamp??

Hello community!
I have a question. I want to install the new OSX Yosemite on my iMac (Late 2013). There is a HDD with 3TB. On this I have 2 partitions. One with Mavericks, the other one with Windows 8.1 Pro. Now I want to know, what about Bootcamp, when I make a clean install?! Do I need to install Windows Bootcamp again??
I hope, someone can help me!
Thanks a lot!
Best Regards
Kevin

I think that by upgrading there shouldn't be any problems. But clean install on the OS X partition? That's my question too

Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
Picture below, many thanks for your help.
Jason

Back up all data before proceeding.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
Start up in safe mode to rebuild the font caches. Restart as usual and test.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
If you still have problems, then from the Font Book menu bar, select
File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

What about session memory when using BEA Weblogic connection pooling?

Hi,
consider a web application, allowing database connections via a BEA Weblogic 8.1 application server. The app-server is pooling the oracle connections. The oracle database is running in dedicated server mode.
How are the database requests from the web app served by the connection pool from BEA?
1) Does one oracle session serve more than one request simultanously?
2) Does BEA serialize the requests, which means, that a session from the pool is always serving only one request at a time?
If (1) is true, than what about the session memory of Oracle sessions? I understand, that things like package global variables are beeing stored in this session private memory. If (1) is true, the PL/SQL programmer has the same situation, as with programming an Oracle databas in "shared server" mode, that is, he should not use package global variables etc.
Thankful for any ideas...
Message was edited by:
Xenofon

Xenofon Grigoriadis wrote:
Hi,
consider a web application, using BEA between client and an Oracle Database (v9i). BEA is pooling the oracle connections. The oracle database is running in dedicated server mode.
How are the database requests from the web app beeing served by the connection pool from BEA?
1) Does one oracle session serve more than one request simultanously?no.
2) Or does BEA serialize the requests, which means, that a session from the pool is always serving only one request at a time?
Reading "Configuring and Using WebLogic JDBC" from weblogic8.1 documentation, I read:
"... Your application "borrows" a connection from the pool, uses it, then returns it to the pool by closing it...."
What do you mean by returning the connection by closing it? Tbe server will either return the connection to the pool or close it...When application code does typical jdbc code, it obtains
a connection via a WebLogic DataSource, which reserves an
unused pooled connection and passes it (transparently wrapped)
to the application. The application uses it, and then closes
it. WebLogic intercepts the close() call via the wrapper, and
puts the DBMS connection back into the WebLogic pool.
The reason, why I as an Oracle programmer ask this is, because every session (=connection)
in Oracle has its own dedicate, private memory for things like global PL/SQL variables.
Now I want to figure out, if you have to careful in programming your databases, when
one Oracle session (=connection) is serving many weblogic requests.It is serving many requests, but always serially. Do note however, that we
also transparently cache/pool prepared and callable statements with the
connection so repeat uses of the connection will be able to get already-made
statements when they call prepareStatement() and prepareCall(). These
long-lived statements will each require a DBMS-side cursor.
>
Thankful for any ideas or practical experience...
Message was edited by:
mk637Joe

TS1550 What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine

What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine backup. Already have a wireless network that works fine so no need to mess with it. We get the internet via cable company and their modem is upstairs and the Time Capsule is downstairs in the basement. The latest error message was about it could not backup as it was already in use (should have written it down before clicking OK and moving on.

See if this helps...
http://pondini.org/TM/C12.html

Hello adobe muse when opening the program after entering my account information it says an unexpected error has occurred, what should I do

hello adobe muse when opening the program after entering my account information it says an unexpected error has occurred, what should I do

Hi
This looks an older version of Adobe Muse, Please try the steps given in this article
An unexpected error occurred I -200

CS6 About what Adobe thought when...

... when designing the the required option...
To see the effect you need to click on the picture because the forum in this view off the block GIF animation.
I will add that it is very alignment tools in the toolbar toview a very good and I awaited feature. However, itsinclusion causes more trouble than not ...

Wade, Now I see that you're not kidding...
This is a total farce rather than upgrading from where you can enjoy in 2012 because now you have this job so much more for less money. No fussiness, such a life.
I'm sorry but this is too much for me. This and a comedy drama.
I write about the need for true functionality:
Look this, see the date of these alerts.
http://forums.adobe.com/message/3047080#3047080
I'm sick of those damn palette through which you can not see my work on screen.
A quick example. Control bar control. Why all the functionality of the tranform can be achieved with this bar but Control Panel aligment for two separate option requires you to open the Align palette?
When did the control panel apperance and beam pallet with information about the isolated facility, enjoyed as a child. Unfortunately, it seems that Adobe completely different groups doing different tools, and they do not like each other or do not know.
In Illustartor I miss only a consequence of the introduction of new ideas and tools. Now it looks as if Adobe in fear before the start of current customers still tunigowało Ford Model T. You can not leave the new engine to the old steering wheel and manual wiper.
Adobe Illustrator is a responsible program but it is annoying when you use. Especially, it seems that the only missing the great success of these smart people quit people together with the designer in one room. Give the candy to the agreement and does not release until we simplify the method of achieving the goal by the graphics. Now, instead of enjoying the work of the new tools I feel like a hamster in a barrel.
Please help Adobe to stop thinking of me as a man cave you will enjoy the matches.
I do not speak good English but I do not be stupid. I did not learn English I have to sit at the Illustrator ...
Maybe I am too hard, I use this program but I thought that Adobe was this expected?
Wade. I do not underestimate you. I'm really glad that you have the courage to wait to talk about it.
When I sit down to work with the new Illustrator wonder what Adobe thought when he created ...
Thank you nad Best Reagards for all.

HT4413 What about secondary disks - where do they go when they are restored by Time Machine?

What about secondary disks - where do they go when they are restored by Time Machine?

I see the "Remove now" button next to that checkbox--exactly
what messages does that button remove? The current message?
All messages? Just the ones that don't have a blue dot next to them?
The Remove Now button removes ALL messages available at the incoming mail server for the account.
To remove an individual message from the server, select the button at the bottom of the mailboxes drawer which has a gear icon.
At the bottom of the menu window that appear, select Get Info.
Select the POP via the Account selection - the account will be already selected if you are accessing a single account with the Mail.app.
Under the Messages On Server tab at Show Messages, All messages on POP server should be selected.
The window below will reveal all messages currently available on the server. You can select an individual message or multiple messages and then the Remove From Server button.

What are muse templates and how do i use them?

what are muse templates and how do i use them?

thank you for the information. the reason i am asking is that i am having a problem with a website i am building in muse, specifically the functionality of my accordion menu. the accordion menu is on the left side of the page with a couple of elements directly beneath it. i would like the elements directly below the accordion menu to be pushed down when the menu is opened, however the menu is pushing everything on the page that is below down when it is opened. i have attached images to illustrate what i am talking about. is there any way that i can have the accordion menu push down just the elements directly below down and ignore all of the other elements on the page?

HT5071 Is it possible to call a locally installed ibook from a hyperlink? What about to a bookmark?

Is it possible to call a locally installed ibook from a hyperlink? What about to a bookmarked page?
I have 2 questions..
1. Can I send a link via email that when launched will open an ibook that has already been downloaded to the bookshelf?
2. If question 1 is possible, can I take it a step further and call a bookmark, i.e. chapter 3.
Our company has it's own appstore and I want to send out links to sections of the ibooks using bookmarks or at the very least take them to the start of the ibook.
I don't need to give them a link to install the ibook as they already have it installed.
Any help would be much appreciated.
Chris.

That would be cool, but it's not possible. The ibook is not accessible by URL in the user's bookshelf.

HT1206 Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

What is happening when recovered files show up in my trash everyday. These files are recovered from my Iweb.

What is heppening when folder entitled "Recovered Files" show up in my trash daily for the last 3 days?
They are apparently recovered art thumbnails from my I web.

Annoying, but nothing to worry about.
Sometimes the OS just tries to rescue files you've trashed.
It will happen almost every time if they were built-in templates (but the Application will replace them anyway)
Just empty the trash.

What about Muse when I am travelling?

Similar Messages

Maybe you are looking for