What about this error message : Rastertoscpll quitted before printing ?

Hi all,
I want to print any document and ubnfortunately I obtain this message on mu MacBookPro :
Rastertoscpll quitted.
No problem with the same printer with my iMac.
Many thanks
Paul from France

Usually (not always, but usually) you'll receive this error message because you haven't given your computer a 'name'.
Open System Preferences>Sharing and make sure that your computer has a name. If it doesn't, add one. Try printing again after you've 'named' the computer. It should work now.
Clinton

Similar Messages

TS2753 Unknown error 23. What is this error message all about ?

Unknown error 23. What is this error message all about ?
My phone not starting up. When I updated Itunes - it came up with that error message.
Cheers
Vinay

core audio error mssg -39?
core audio is telling you it needs a break and is "goin' down the pub for a guinness".
the tricky one is: ca error -39bs. where it asks you to shout the guinness.

What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found: /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder. You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again. This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do. The article on how to do this is here. (http://www.apple.com/macosx/recovery/) I have had to do this before and it works like a charm. It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

HT1379 My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying. H

My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks, from Lion. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying, as this darn Error message pops up at least every 60 seconds Help?
Here is thev error data that shows up in my Console after it happens. Of course, it might as well be GREEK TO ME!:
Process:         SafariDAVClient [5937]
Path:            /System/Library/PrivateFrameworks/BookmarkDAV.framework/Versions/A/Helpers/Safa riDAVClient
Identifier:      SafariDAVClient
Version:         106
Code Type:       X86-64 (Native)
Parent Process: launchd [202]
Responsible:     SafariDAVClient [5937]
User ID:         501
Date/Time:       2014-02-02 15:40:22.026 -0800
OS Version:      Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: 38C42EEE-0927-2A62-02AC-FE5E1CEBFA44
Sleep/Wake UUID: F4BAEB51-39DA-42AE-8105-AB27895B59BD
Crashed Thread: 0 Dispatch queue: com.apple.Safari.BookmarkFolder.childrenAccess
As well, my iCloud Pref Pane will not open!
What the HECK is goin' on?

feckinHell wrote:
As well, my iCloud Pref Pane will not open!
That's related since the process is attempting to load your Safari bookmarks from iCloud, and is crashing for some reason.
Try this:
Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
~/Library/Caches/com.apple.iCloudHelper
Drag that entire folder to the Desktop.
Quit Safari.
Attempt to open iCloud Preferences again. If it opens de-select Safari.
Launch Safari again and determine if the problem is fixed.

What does this error message when I try to do updates mean? And how can I fix it? Thanks. The operation couldn't be completed. (NSURLErrorDomain error -1012.)

What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

TS1846 What does this error message mean?

What does this error message mean? I am trying to burn a project to DVD...
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

The project is 1:22:30 - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me

HT1386 I am trying to sinc my iPhone with my iTunes to get my music on my phone and i keep getting an error message 42001 pop up when i attempt to sync what is this error message and what do i do to fix this problem??

I am attempting to sync my phone with iTunes and I keep getting an error message 42001 so my phone can not sync with iTunes... What is this error message and what can I do to fix this problem and sync my phone to iTunes?

Dear Apple team,
I recently bought an iphone3GS from USA and jail broke it. Since I heard the there are lots of disadvantages I thought to unlock it officially through the original owner (in copy). He assisted me and confirmed that he unlocked it with AT& T (See the attachment). According to the instructions I restored the phone. But it is not activating with “Activation server is currently not available, please try again or try with iTunes”
When I try with iTunes , it says “you haven’t inserted a SIM” even though I insert the original AT&T SIM.
My current location is Sri Lanka ,so don’t have any apple support.
Please help me to be a good fan of apple.

What does this error message mean? disc recording not found

What does this error message mean? disc recording not found

Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

TS1702 0xE8000004-what does this error message mean?

0xE8000004-what does this error message mean? I get it when trying to sync my Garmin USA app.

See http://support.apple.com/kb/TS3221.

HT3275 Any ideas about this error message? (error -1)

Any ideas about this error message?
"The backup disk image “/Volumes/Data/ MacBook Pro.sparsebundle” could not be accessed (error -1)."

Standard Lion networking .. Reboot the TC or use the disconnect all users in the AU.. it has not closed the sparsebundle correctly from last time.. or has simply forgotten where the TC is.
It is reported at least once a day here.
See C17
http://pondini.org/TM/Troubleshooting.html

What does this error message mean? MFMessageErrorDomain error 1028.

What does this error message mean?
MFMessageErrorDomain error 1028.
I can't seem to delete a message from my mailbox. The above error message comes up every time and the message then reappears in my inbox.

Back up all data. Rebuild the mailbox. Try to delete the message again. If you still can't, continue.
From the Mail menu bar, select
Mail > Preferences > Accounts > Advanced
From the menu labeled
Keep copies of messages for offline viewing
choose
Don't keep copies of any messages
Close the window and save the change. Relaunch Mail and test.

What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)

What does this error message even MEAN??

So as I've been posting on here recently, I'm in the process of upgrading the OS on my old G4 from Panther to Tiger. I've received 2 different suggestions on how to safely do so (the 1st was simply to install Tiger on the 2nd partition of my internal drive, and then designate that one as my boot drive).
But for the 2nd method, it was suggested that I clone my current boot partition (using something like Carbon Copy Cloner, which I'm attempting), save the clone to my external drive (so I can boot off that if something happens), and then Upgrade my Panther to Tiger on the same partition, so that I can keep all my Preferences, Bookmarks, etc.
In preparation, I Verified and Repaired Permissions on both the Source Disk and the Target volume--the External Drive, which is actually formatted in Mac OS Standard; the drive I'm cloning is formatted in Mac OS Extended (Journaled)--and had run the "Clone" command, but immediately got this error message:
"There was an error during correcting volume privileges: chown:/Volumes/Untitled/: operation not supported. Would you like to ignore this error or stop?"
So I stopped.
What does that even MEAN? Should I "ignore" it? Or simply skip Cloning the damned drive, install the new OS to the 2nd partition, and designate that one as my boot drive?? I've been worried about Permissions on this computer, as for some reason I can't seem to Verify, or Repair Permissions for the 2nd partition of the internal drive, but for all I know, maybe you're not even supposed to be able to.
If anyone could help answer either issue though, I'd really appreciate it. I've just been preparing my computer for this upgrade for a day or two, and would really like to go through with it...

You need to first format the external drive Mac OS Extended (Journaled.) Open Disk Utility, select the external volume from the left side list, click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (Journaled) from the drop down menu, then click on the Erase button.
Now you should be able to clone your system volume. However, do this first:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

What does this error message mean and how do I solve it?

I received this error message:
An internal error has occured:Lightroom_Fatal_SQLite_corruption::Database:I:\LR Catalog5\Lightrrom 5Catalog. Ircat:: Error:database disk image is malformed::SQL:DELETE FROM Adobe_Additional Metadata WHEREid_local

It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder. You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again. This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do. The article on how to do this is here. (http://www.apple.com/macosx/recovery/) I have had to do this before and it works like a charm. It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

What does this error message mean? "An unexpected error occurred (error code -6584). It arises when I open my Time Capsule icon.

I had a problem when downloading iTunes 11.1 and had to clear my disc and rebuild it from Time Capsule. Thats when I learned that Time Capsule stopped backing up back in January. So now I keep looking to see if Time Capsule is backing up but whenever I open the Time Capsule icon i get this error message. What does it mean and how can I fix the problem?

The backup is corrupted in some way.. you need to verify it.
The error is common enough but there seems to be a range of solutions.
Read the thread here.. https://discussions.apple.com/thread/3123920?tstart=0
Look particularly for the posts by Pondini.
And check his troubleshooting for methods of doing things like verify.
http://pondini.org/TM/Troubleshooting.html
A5

What about this error message : Rastertoscpll quitted before printing ?

Similar Messages

Maybe you are looking for