What about this website of movies online

I want you all to have a look on this website and let me know if i can make some changes in it. Or share your reviews about the website. What according to you will rate it out of 10. Here is the link to the website.
watch movies online
Thanks in advance

The problem sounds like it could be an issue with what format you selected for the project when you first created it. iMovie gives you a choice of DV, DV Widescreen, HDV 1081, HDV720, MPEG-4. If you choose one format for your project, but the camera is not set for that particular format, you will see the black bars appear on the sides or around the top of your image.
Which Canon camera are you using? Check to see what format the camera is recording, and make sure your new project matches this.
If you find this helpful or if this solves your problem, make sure you indicate this by clicking the appropriate icon in the header of this reply.

Similar Messages

  • Hey What About This Idea

    I tried to find an earlier post about this, and I didn't see anything. I apologize if it has already been discussed.
    How about a "Tab in Tab" browsing feature being added. In other words, having the ability to view two (or more) tabs at once. It comes up for me all the time. I am browsing on one tab, and I am waiting for something to happen in another. It would be great to me if I could see a small version of the one tab while I was browsing for other things in the other tab.
    Thoughts?

    Ahh! But I don't want a thumbnail. I want a live page.
    i.e. I play chess online. I can do a search for another player that can sometimes take some time. While I am waiting it would be nice to be able to browse in another tab, but currently if I am viewing another tab, I have no idea what is happening in the first tab.
    Or suppose I am waiting for a file to finish downloading, or a movie to start playing, etc.

  • What about this case?

    http://www.belkin.com/IWCatProductPage.process?Product_Id=512159#
    it seems like a pretty slim fitting case. i am just really intrested in a better grip. what about that one?

    Morning Alex,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iPhone: Sound muffled or low from the speaker or when speaking into the mic.
    http://support.apple.com/kb/TS1631
    Resolution
    Check the following:
    Check the volume setting on your iPhone. You can adjust the volume by pressing the volume up and down buttons on the left side of the iPhone.
    If you are using a third-party iPhone case, make sure it is not covering the speaker, microphone, or top microphone. Try making some calls without the case to see if a caller can now hear you more clearly or play music to see if the speaker's volume is better.
    If you have not removed the plastic display film used for protection during shipment, either ensure that the microphone and speaker are not covered or remove the film completely.
    Check that the speaker, microphone mesh covers, and top microphone hole are not clogged with lint or other debris.
    If the speaker, microphone mesh, or top microphone (iPhone 4 only) appear clogged, please use a clean, small, dry, soft-bristled brush to clean them. To do this follow these instructions:
    Use the brush to carefully and gently brush the speaker and microphone mesh.
    Brush away from the 30-pin dock connector to avoid getting any debris into the dock connector.
    Hope this helps,
    Mario

  • PROCEDURE DOESN'T EXIST - what about this issue when installation

    install APEX3.2 on Oracle 10 with Http server + mod_plsql
    the Apache error log:
    [Fri Apr 10 16:12:58 2009] [error] [client 192.168.3.56] [ecid: 1239351178:192.168.3.56:1804:5872:1,0] File does not exist: f:/oraclecd/product/10.2.0/db/apache/apache/htdocs/pls
    [Fri Apr 10 16:14:19 2009] [error] [client 192.168.3.56] [ecid: 1239351258:192.168.3.56:1804:5664:1,0] mod_plsql: /pls/apex/apex_admin HTTP-404 \napex_admin: PROCEDURE DOESN'T EXIST\n
    access log:
    192.168.3.56 - APEX_PUBLIC_USER [10/Apr/2009:16:05:16 +0800] "GET /pls/apex/apex_admin HTTP/1.1" 404 357
    192.168.3.56 - - [10/Apr/2009:16:05:22 +0800] "GET /pls/apex HTTP/1.1" 302 5
    192.168.3.56 - - [10/Apr/2009:16:05:27 +0800] "GET /apex HTTP/1.1" 404 342
    192.168.3.56 - - [10/Apr/2009:16:09:49 +0800] "GET /apex HTTP/1.1" 404 342
    192.168.3.56 - - [10/Apr/2009:16:09:57 +0800] "GET /pls/apex HTTP/1.1" 302 5
    192.168.3.56 - - [10/Apr/2009:16:12:58 +0800] "GET /pls HTTP/1.1" 404 341
    192.168.3.56 - APEX_PUBLIC_USER [10/Apr/2009:16:14:19 +0800] "GET /pls/apex/apex_admin HTTP/1.1" 404 357
    and DADs is :
    Alias /i/ "F:/oracleCD/product/10.2.0/db/Apache/Apache/images/"
    AddType text/xml xbl
    AddType text/x-component htc
    <Location /pls/apex>
    Order deny,allow
    PlsqlDocumentPath docs
    AllowOverride None
    PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
    PlsqlDatabaseConnectString 192.168.3.56:1521:apex.domain ServiceNameFormat
    PlsqlNLSLanguage "AMERICAN_AMERICA.AL32UTF8"
    PlsqlAuthenticationMode Basic
    SetHandler pls_handler
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDatabaseUsername APEX_PUBLIC_USER
    PlsqlDefaultPage apex
    PlsqlDatabasePassword *****
    PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
    Allow from all
    </Location>
    Edited by: PPMonkey on Apr 10, 2009 1:21 AM
    Edited by: PPMonkey on Apr 10, 2009 1:22 AM

    Hi Matthias,
    Thanks for your reminding. The DAD is ok.
    And I have found the cause. and it's a little bit complicated.
    I have installed 2 oracles on my machine. Apex and Apache have been installed on different ORACLEs.
    sorry about this. so mass.

  • What about this black border around my movie?

    I've just started learning about iMovie. With a Canon Digital I've shot some test footage. Thing is, some of the clips have a black border around the entire movie where other clips have no border top and bottom but do have side borders. What gives? Many thanks.
    Mac Powerbook   Mac OS X (10.4.1)  

    The problem sounds like it could be an issue with what format you selected for the project when you first created it. iMovie gives you a choice of DV, DV Widescreen, HDV 1081, HDV720, MPEG-4. If you choose one format for your project, but the camera is not set for that particular format, you will see the black bars appear on the sides or around the top of your image.
    Which Canon camera are you using? Check to see what format the camera is recording, and make sure your new project matches this.
    If you find this helpful or if this solves your problem, make sure you indicate this by clicking the appropriate icon in the header of this reply.

  • What about this Ram?

    I want to upgrade my mbp 2011 ram to 8GB.
    Is this a good quality ram ?
    http://www.amazon.co.uk/Kingston-Technology-Apple-8GB-Kit/dp/B001PS9UKW/ref=sr_1 _1?ie=UTF8&qid=1312031082&sr=8-1
    Do i void apple's guarantee by changing it by my self?
    Is there any better ones for that price or the same quality for a lower price?
    Any help appriciated.

    Alexandros
    I've read that people like Crucial and OWC.  Another good chice is Kingston is another good choice. I personally bought the Corsair because of the price. Remember different people have different experiences with the various manufacturers of RAM. So opinions differ. Many had mixed reviews about the Corsair. But for me and for my new 2011 MBP it has been great. Just remember you need the 1333Mhz DDR3. What I learned was Apple puts Samsung RAM in the 2011 MBP. That's what was in mine when I replaced. The final choice is yours to make. Hope this helps. One other thing whatever RAM you choose don't forget to do the memtest once you install it. The easiest way to do this is to download Rember it is a GUI front end for memtest. It is free to use. A final note, be extremely careful how you unpackage the RAM you buy, and be sure to seat it firmly when you replace it. You can do it yourself it is not difficult at all. Takes about 10-15 minutes. You'll need a #00 phillips head screw driver to remove the screws on the bottom of your MBP. Remember too by adding more RAM it will increase slightly the operating temperature of your MBP, but not significantly.
    Joseph

  • What about THIS message?

    People keep mentioning error codes. I get this:
    *We could not complete your iTunes Store request.*
    *The network connection was reset.*
    *Make sure your network connection is active and try again.*
    My iPhone is activated with 2.0 software, but I cannot restore my data.
    I get no option to do anything other than eject. (I've tried unplugging/replugging about 20 times)
    Any ideas?

    Activation servers are down (tons of threads and news reports now about it).
    Just wait till later.
    Leave phone plugged in, no need to unplug/replug
    When you want to try, just click on Music or Movies or something then click back on the iPhone.

  • What about this battery life???!!!

    Has anyone come up with an optional battery. Even with the Advanced Killer, my battery doesn't last an entire day. And I don't talk on the phone much at all for it to go dead like it does..Help!

    The great one strikes again! I love my HTC extended battery. Not like we have tons if accessories to purchase with this phone. May as well enjoy life like me and not worry about battery life. I'm a heavy user on WiFi mostly. This battery will get my heavy use to the end of the day plus a pinch more. Just in time for Mr Phone to charge when I get my charge sleeping.

  • Pop-ups - what about this?

    Is it possible to create a link in Presenter that opens a small HTML pop up in the middle of the page? (in other words each pop up is an HTML file already uploaded online) If so does anyone know how to do this?
    Regards, Neil

    See the following http://forums.adobe.com/message/4312894#4312894

  • What's this, when mouse move on a href ?

    When the mouse move on a href, a samll icon will apear, and if mouse hove on the icon, the href details will be showed.
    like: https://www.sample.com/....
    #Base64

    Firefox doesn't do this by default, so this feature is added by an extension or theme.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • What about this web site wants to run the add-on Quicktimecheck Scriptable Object fr. Apple Computer Inc.  ( unverified publisher )

    Since the change to the layout of the Apple Forums here on line in the apple support, and after the I Phone  ( eye Phone )   news about the I Phone capturing movements and data from consumers, I have lost the trust of the new Apple Computers, and wandering if the company really wants us to inner act with one another, I wonder if they know they could lose us?  Anyway,  I still need to find my old discussions from the Apple Forums and my G4.  I have one because I tabed it on the tool bar.  It displays just like it used too, so I better copy it and save it as a souvenir

    Don't trust that wherever it coming from, sounds like the DNS changer a bit, which pretended to be a QuickTime update.
    I & another asked higher up for help on your name, no reply yet, but I think the / in your alias liiks like a folder seperator to the new board anyway.

  • Email contact list breached and what about this "mac protector"

    I use Hotmail as my email address, and safari as my web browser.
    Last week someone was able to send an embarassing message to all the folks on my contact list.
    How could this have happened?
    Also a couple of weeks ago, I received something called "mac protector" unsolicited. It looked very much like an update from Apple, but I deleted it.
    Is there any connection between these two incidents, and what can I do to prevent anyone from getting my contact list again.
    I'm running the latest MAC OS (10.6.7).
    Thanks for your help.

    You were right to delete it: Mac Protector and Mac Defender are malware of a quite nasty kind: never ever install programs you are offered. Only obtain programs from legitimate sources. No legitimate program will arrive unannounced, or claim to have 'scanned' your Mac and found something.

  • S v K - what about this?

    http://discussions.apple.com/thread.jspa?threadID=1197649&tstart=0

    Quote
    Originally posted by Lamy
    There are same test on my machine. Your scores seem to be ok, see yourself:
    Sandra Arithmetic Benchmark and Sandra Memory Bandwidth Benchmark
    Is what your bios version ?
    could u post here your complete configuration ?
    Ps: i´m doubtful about which Mobo to buy...865PE FIS2R or 875P FIS2R....i´m lost

  • TS1389 -42110  What about this error with windows 8 ?

    Itunes, How to resolve error -42110 on windows 8 ?

    "Error 3001,"  "-42110," or "5103
    This alert is related to iTunes Store movie rentals and authorization issues.
    Make sure you are using the most recent version of iTunes and QuickTime. They both  can be downloaded free of charge.
    If your iTunes is up to date, remove the SC Info folder.
    NB: the article for windows 8 isn't there yet.

  • Ok, so what about this...

    I was wondering how to export Metadata for multiple images as seperate files without having to export the master files as well. All I can see is I either have to export the masters with the sidecar files, thus duplicating the lot or I can export a single text file with all metadata for all images. How does one A) export individual XMP files without the masters or B) use the single txt file in apps like photoshop?
    I suppose I could export all the masters and the throw away the exported master files and put the XMP files into the folder that already has the images in it. But this seems like more work than I should have to do.
    Thanks
    Craig
    PS, I probably should note that I am referencing the files, not storing them in the Aperture library

    HI Victor
    For some wedding clients who choose to pay me sufficiently, we release the files after a set period. As they are purchasing the images, we think it fair that they receive the original RAW file. But also want to ensure that they can reproduce what we gave them. It is strongly suggested that they use one of a list of Labs that we reccommend. I suppose that I could limit them to tifs with the changes already set in place, or give them a set of tifs or jpgs as well as the RAW, but really the problem is if they are getting the RAW, they need the XMP file with those changes. Many people have PS but few know what to do with a RAW file ( assuming that they have heard of one)
    But that is not really the question here, what if I am working in Aperture and then need to send the files to one of my Windows machines (admitted, unlikey) or ask my lab to work the image in some way (who use Macs but not Aperture.)
    It would just be nice if all these programs talked to each other in this area.
    Craig

Maybe you are looking for