What about triple voltage of MSI GTX 660ti PE

 i bought MSI 660ti PE because MSI PR that, but the fact is not like that, what can MSI do in future for us  , sorry about my english

https://forum-en.msi.com/index.php?topic=162345.0
See the official press release, perhaps if everyone effected began complaing to NVIDIA, they would get rid of this green light program.
Is the card at least working minus the overvoltage issues.

Similar Messages

  • MSI GTX 660TI Arriving Tomorrow!

    Hey all, you might also know me from EVGA Forums, where I usually am.
    Anyways, long story short, I got pretty ticked at EVGA lately, they just haven't been ahead of the comp like they were..
    Well I purchased the MSI GTX 660Ti Power Edition (OC'd version), on NewEgg yesterday! It's set to arrive tomorrow.
    What all do I need to do so I can fully register it, just in case any issues every arise?
    I just wanna make sure it's registered right. Because I once had an MSI card and somehow didn't register it right, then didn't have any warranty.

    USA:
    http://service.msicomputer.com/msi_user/productlogin.aspx
    If other, you need to goto your countries site.
    Quote
    I just wanna make sure it's registered right. Because I once had an MSI card and somehow didn't register it right, then didn't have any warranty.
    So long as you can prove when you purchased something, they will need to honor w/er warranty is offered.

  • MSI GTX 660TI P.E ISSUE

    ok so basically i have recently bought an msi gtx 660 ti graphics card but i have been experiencing an issue where on windows 8 if i launch a modern ui application such as twitter the screen will flash and then the graphics quality for maybe a few seconds will look bad before going back to normal but if i just stay on the desktop and use apps on there then nothing will happen. so i was wondering if anyone can help or knows what is going wrong or if they have experienced this.

    Quote from: mohammedalih on 08-June-13, 00:44:06
    ok so i've uploaded the issue on youtube and also this never happened before when my hdmi cable was plugged into the motherboard
    i've tried dvi and that problem doesn't happen, so is there something wrong with the graphics card?
    Use DVI.
    That looks like the HDMI flickering (the HDMI 29/59 Hz frame rate bug).
    This bug affects any videocard with a hardware deinterlacer (most of the recent graphic cards).
    There is no fix.
    The only workaround is in Nvidia Control Panel / Adjust Desktop Color Settings
    3) set content type reported to display to "Full-screen videos"
    See if that helps.
    But as I said before, use DVI (same performances but no bugs).

  • Control Voltage for Msi GTX 760 Gaming

     We can see MSI GTX 760 Gaming has 8 pin + 6 pin conector so good for up to 300W but MSI Afterburner only add 12mV, it's too small with board power and it;s cooler, more voltage can be possible in future

    No, nvidia restricts available overvoltage. MSI won't add more overvoltage possibilities.

  • Cant give any voltage to MSI GTX 770 TWINFROZR GAMING OC

    hi guys
    when i run msi afterburner the mv limit is +12.i cant go any further and giving +12mv doessnt make any difference.it stays at 1.2v under load.how can i give voltage to my card?

    Actually the gpu seems to go in to idle mode even with Gaming App running. Problems seem to only exists in Windows 8.1 though, programs like Spotify, Sound Blaster Cinema and Chrome stress the gpu enough to put back the gaming mode. -disable-gpu on chrome launch options seems to help, so does enabling Windows 7 Compatibility mode on Sound Blaster Cinema, but nothing works for Spotify.
    I can confirm with Windows 7 none of these problems existed for me personally, all of the above mentioned programs ran with idleclocks. The profile changing problem solved itself somehow, now I can switch between them and the clocks apply when I go gaming.
    Thanks for the answer.

  • MOVED: Control Voltage for Msi GTX 760 Gaming

    This topic has been moved to Overclocking, Undervolting.
    https://forum-en.msi.com/index.php?topic=171115.0

    No, nvidia restricts available overvoltage. MSI won't add more overvoltage possibilities.

  • MSI GTX 970 voltage

    What is max (stock) voltage for MSI GTX 970 card?
    Mine is at min: 0.85 and at max at 1.225v
    ASIC value is 66.9% ... maybe the max voltage is dependant on the ASIC value

    I saw someone's MSI GTX 970 max voltage can manual adjust to 1.25v at other website discussion.
    but my friend's 970 the ASIC is 67.8%, and his min: 0.85v, max: 1.218v (default), manual set the voltage to +87 at Afterburner the max is 1.243v.
    Is there any other way to check the max voltage?
    We just ran 3D test to see the max voltage...not sure if it is the max value...

  • MSI GTX 960 GAMING VS MSI GTX 960 GAMING 100ME

    Hello,
    What is the difference between MSI GTX 960 GAMING 2G GDDR5 and MSI GTX 960 GAMING 100ME GDDR5 ??

    Quote from: aatish579 on 08-May-15, 11:17:56
    Does this card is supported on MSI H81m-p33 board?
    it should be if you update the BIOS to the latest available (1.9) and have used the BIOS + ME update on it!

  • GTX 660TI PE OC

    Hi
    I was hoping if anybody else can comfirm to me that is also using a MSI GTX 660TI PE OC GPU and is Running W8 64bit..
    If they are getting this error pop up randomly in BF3 (this could happen within 5 mins or 4 hours) :
    DXGI_ERROR_DEVICE_HUNG due to badly formed commands GPU NVIDIA Geforce GTX660Ti Driver 31407.
    As I've just rebuilt my PC with this GPU running w8 64bit and this error seems to only pop up when playing BF3.
    I also seem to have a physx driver stuck on my system -- as I can not un install it as it say the file does not longer Exist-- could this cause a problem ? I will re-format my PC to try and clean this BUT I'm not 100% this i will solve my problem.
    If anybody has any ideas how to fix this or if they have resolved this problem already if you could let me know that would be great..
    If you require anymore info please let me know
    Windows 8 64bit
    Intel i5 3750k Ivy 3.4GHZ
    artic cooling 30i CPU cooler
    GigaByte Z77 D3H
    Corsair 16GB DDR3 LP
    MSI GTX660 Ti PE OC
    256GB Crucial RealSSD M4
    1 X 750GB HDD
    ASUS Xonar DX
    Dell Ultrasharp U2312HM 23 inch IPS LED
    COOLER MASTER 650W PSU
    Many thanks for any help or advice you can give me
    apex40000
     

    Ok Svet
    I tried this and I did manage to remove the bad driver File.
    BUT still getting the same problem --- :-(
    If you have any other ideas on how to relsove this problem please let me know  :-)
    Otherwise last resort is to clean install the PC with nothing other than drivers for Nvidia and bf3 to see if that solves it ? BUT I don;t want to do this if possible so keep any ideas on how to fix this coming.
    Many thanks for all your help guys
    apex40000
    Quote from: Svet on 03-April-13, 01:03:22
    Remove vga drivers in Safe Mode with >>Driver Fusion<<
    then install VGA drivers from msi web for your card and retest

  • [Request] GTX 660TI POWER EDITION 2GD5/OC Edition - UEFI Vbios

    Hi, i need uefi bios for my msi GTX 660ti pe oc edition (2gb)
    here is the serial number >>> SN : 602-V284-050B1301129512
    current bios >>> h t t p s://xxx.sendspace.com/file/4pbx6o
    Thank you

    here it is

  • What MSI afterburner to use for GTX 660TI PE

    Hi,
    I am little confused now about what version of MSI afterburner i should use, i assumed my GTX 660TI power edition need 2.2.3 to get fully voltage unlock but i also read that 2.2.4 is the better one and that gives me complete voltage control.
    If that is true, where can i get 2.2.4? I looked all over the Internet but could not find it.
    Thnx in advanced. 

    Quote from: hurricane28 on 09-June-14, 19:10:48
    what is different compare tot he 2.2.3 and the 3.0?
    Read the changelogs where I linked you already... >>How to use MSI Afterburner<<
    Quote from: hurricane28 on 09-June-14, 19:10:48
    And can i use the latest like the final?
      What do you think why we we told you to use 3.0.0? Of course. https://forum-en.msi.com/index.php?topic=161235.msg1300776#msg1300776

  • GTX 660Ti PE's Voltage is able higher than 1.212 V, isnt it?

     i wonder that: the voltage of GTX 660TI PE could be over than 1.212V,  board is designed for that ? thanks so much 

    Use Afterburner. Precision X most likely just reads target voltages like GPU-Z.
    >How to use MSI Afterburner<
    A PE can't be properly controled or read out with other software. As Afterburner 2.2.4 is not out yet the 660ti will however lack triple overvoltage so far.

  • What is the latest VBIOS for MSI GTX 660 Twin Frozr III OC?

    Staff would like to help, first of all sorry for my english, I'm from Brazil.
    I wonder what is the latest VBIOS for the model MSI GTX 660 Twin Frozr III OC?
    Model:
    N660 TF 2GD5 / OC
    S / N: 602-V287-04SB1208202320
    Another my doubt is:
    What is the difference of this model for Gaming Version.
    It has the possibility of transforming the MSI GTX 660 Twin Frozr III OC MSI GTX 660 Gaming?
    Thank you for your help.

    Quote from: Dragon16 on 20-May-15, 10:46:55
    Staff would like to help, first of all sorry for my english, I'm from Brazil.
    I wonder what is the latest VBIOS for the model MSI GTX 660 Twin Frozr III OC?
    Model:
    N660 TF 2GD5 / OC
    S / N: 602-V287-04SB1208202320
    This is the latest UEFI vbios: https://forum-en.msi.com/index.php?topic=251786.msg1447440#msg1447440
    Quote from: Dragon16 on 20-May-15, 10:46:55
    Another my doubt is:
    What is the difference of this model for Gaming Version.
    It has the possibility of transforming the MSI GTX 660 Twin Frozr III OC MSI GTX 660 Gaming?
    No, that is not possible. These are totally different cards. They have a different custom design with a cooler totally different and the GAming offering profiles that can't be used with an ordinary N660 TF 2GD5/OC

  • MSI Gtx 980 core voltage LOCKED !

    I just put my msi gtx 980 4g into my pc, was gonna take some benchmark testing and overclock, but i found out that in the msi afterburner, the core voltage is locked. now this is weird i think, im really new to overclocking, but iknow with all the money i spendt on the 980 that option should be UNLOCKED !
    Any help to get ? Thank you.
    My PC specs:
    MSI Geforce gtx 980 4G
    ASROCK h87M pro4 Motherboard
    16 gig ram
    i5 4670k processor
    600watt powersupply
    256 gig ssd
    1tb harddisk
    some fans, some led lights, and uh yea thats it.

    Quote from: shahabi-89 on 17-December-14, 00:14:30
    @Nichrome Off-topic
    But can you please help me with the new bios for gtx 970.
    I did as Svet asked and created a new topic with bios attached and S/N. But he is offline now and hopefully you can help me.
    Continue with your own topic then.
    Quote from: shahabi-89 on 17-December-14, 00:14:30
    @partynachim, sorry for loaning your thread..
    Instead of hijacking 

  • Msi gtx 970 4G low fps

    Hello,
    Been struggling with this for about a week now. I took the offer on the Far Cry 4. I upgraded my card from a GTX 660ti single card. I have played FC 3 on the old card with no difficulties. I have loaded the newest drivers and upgraded my BIOS. I have Bench marked the card  on 3DMark and Unigene. I am getting very low readings and not even reaching 30 fps. When I play Far Cry 4 I barely get 12 fps. I am not sure if I have done something incorrectly here via the installation or I have a faulty card. My setup is as follows;
    i7 - 3770k @3.50 GHz 4 core
    16 GB of RAM
    Windows 7 Home Premium 64 bit
    BIOS American Megatrends Inc 2014
    Any insight here would be very much appreciated.

    Hi Dave,
    I have the same card as you this is what ive found to be my best setttings. There by no means a fix just helps.
    1 uninstall the driver suite using DDU in safe mode .
    2 download drivers 344.11.
    3 install ONLY 344.11 not the package install what you need later down the line.
    4 go in the bios and see if you can enable x.m.p in your ram  also when your there check pci is on next gen 3 .
    5 back in windows go to nvidia control panel and set ( this is the best one for  me ) change down from the native resolution to one lower that works for you . eg i use a Sony bravia native is 1080p 1920x1080 iv'e changed to 1080p 1600x900
    6 go to manager 3d settings
    max  pre rendered frames  use 3d
    multi display single display use performance mode
    power management prefer maximum performance
    vertical sync use 3d application
    virtual reality pre rendered frames  1
    msi after burner overclock  your gpu
    core voltage  +20
    power limit  max
    clock core  +200
    memory clock +250
    fan speed auto
     In game  set  all  graphic settings to  max (for some strange reason you don't see any fps improvement if you set them to low )
    turn v sync on  in all games or cap fps
    use fraps software  to monitor your fps
    my games 
    Bf4 multi player  in use bf4 settings editor to cap my fps at 60  . have micro stuttering but is  is 95% 60 fps every where
    cod blop2 frame in game caped at 45  very  little problem
    crysis   totally unplayable
    far cry 3  working ok
    just cause 2 good
    batman arkham just started playing seams OK
    Hope it works for you
    Michael

Maybe you are looking for

  • Mapping of Equipment (Excavator) in SAP ETM

    Hello Experts, I have a senario where ihave to map a machine (Excavator) with the following specification in SAP ETM: 1. WORKING HOURS PER SHIFT 2. ACTUAL DIESEL CONSUMPTION PER SHIFT 3. STANDERD DIESEL CONSUMPTION PER HOUR 4. STANDERD DIESEL CONSUMP

  • Trying to create addon...

    Hi all, I am trying to create an addon for B1 2007 for the first time. I have created the program. I have downloaded B1DE and installed it for the installation wizards, but I am using Visual Studio 2003 and doesn't seem to support it. [Content Delete

  • Why has iphoto stopped importing from iphone

    Up til now iPhoto has always opened automatically when I connect my iPhone to my computer and started importing photos. In the last week it has stopped.  I have looked at iPhoto preferences and iTunes preferences but can't find how to change settings

  • When I try to restore my Iphone 4 the status bar almost reaches the end but then freezes HELP!

    Its in recovery mode and Itunes recognizes it . Yet when it gets to the restoring Iphone software it freezes at the very end.

  • Videos Corrupted When I Tried To Change Their Icons?

    Today I tried to change the icon of an avi. file from the standard video screenshot to a normal picture. I started by changed the icon of the file in 'get info' & then using liteicon, I restarted the finder to change the image. For some reason though