What accessory to use when connecting to Harman Kardon AVR

Hi,
we use a Harman Kardon AVR 145 for our audio at home. Please can anyone advise me what accessory to use for connecting the iPad? We have the bridge for our iPod, but that is no good of course. Please advise on a cable to use. Thanx!

Sorry, but you'll have to either wait for someone owning that equipment to show up or for someone to take the time and trouble to look it up and see what sort of connection options are provided on it. Or, if you want to perhaps move the process on a bit more quickly, and seeing as how you have it right there, you could always provide that info.

Similar Messages

  • TS3623 Apple TV works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite receiver work fine both ways

    Apple TV (1080p) works fine if connected directly to Samsung tv, but shows no or incompatible signal when connected through Harman Kardon AVR 1565 av receiver, other signals like dish satellite decoder work fine both ways.

    Does it help if you set the output to 720p.

  • What cables to use when connecting Airport Extreme and Windows XP?

    I have a DSL modem and Airport Extreme. Right now I am getting Internet with the cable plugged into "Ethernet" and is connected to my computer. If I want to connect my Airport Extreme to my computer, where do I plug in everything?
    Thank you for your help - I am a complete wireless newbie!

    Jgreene19
    You don't seem to be making much sense, please can you clarify your network and your computer.
    You have a DSL modem with an Ethernet port?
    Do you have an Airport Extreme Base Station?
    What computer do you want to connect by Airport, your iMac listed in your profile (or as this is an Airport for Windows forum) a Windows PC?
    Does this Windows PC have a wireless card or not?

  • What cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    what cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    Mine has four  Seriously shauntana the splitter is easy, a simple click to changre feed and eventually you will damage the HDMI port or cable by taking it in and out.  True you can only use one feed at a time nut you can only use one port on the telly at one time too.  I used it on my old one port telly for PS3 and Sky and it worked a treat.
    Enjoy
    Jules

  • How do I determine what URL to use when launching to display a RH10 .htm page?

    Hello,
    We are implementing RoboHelp 10 for our online documentation and are sourcing it from Framemaker 11. I am trying to determine exactly what URL information the developers need to build for the launch to the specific IBM System i screen. Is anyone launching RoboHelp from a backend ERP system? If so, how did you determine what level to use when building the URL for that page?  Thanks for any assistance you can provide.

    It depends on whether you just want to open the help at the default topic or open context sensitive topics.
    Both methods are described in Calling Help on my site and there is more good information at http://www.wvanweelden.eu
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • ANYONE KNOW WHAT I CAN USE TO CONNECT MY IPOD NANO TO AN AUX DEVICE SO I CAN LISTEN TO MY MUSIC THROUGH MY STEREO

    ANYONE KNOW WHAT I CAN USE TO CONNECT MY IPOD NANO TO AN AUX DEVICE SO I CAN LISTEN TO MY MUSIC THROUGH MY STEREO

    Are these messages in the Sent mailbox? If not, they're not coming from your computer.

  • Harman Kardon avr 1700

    Hi,
    I noticed Best Buy is selling the Harman Kardon avr 1700 for $250. I am hesitant to buy because I noticed it has a different type of amplifier/power supply, type D I think. The receiver weights 12.8 lbs vs 18lbs.
    Has anyone listened to the Harman Kardon 1700 in Best Buy stores. I am curious of the sound quality. There are no reviews of the sound quality besides Best Buy reviews on the product page.
    Best Buy black friday ads show that the Denon AVR 1613 will be on sale for $275. I was curious how the HK 1700 would sound compared to the Denon 1613. If the Denon sounds alot better I would wait and buy it online from BB on black friday.  the specs show that the Denon 1613 and HK 1700 have comparable features for the most part.
    I bought JBL CS 480 surround sound system and need a good receiver to power it.  Will accept other suggestions too.
    thanks,
    Mike

    SlimJim77 wrote:
    rwillen wrote:
    SlimJim77 wrote:
    I was skeptical too, but these modern class D amps are really starting to impress me.
    I'm  fan if the line level Denon units out.
    Real audiophiles test amps without all the effect processing.
    Real audiophiles aren't buying $300.00 AVR's.
    The Audessy MultiEQ is still the better of the pinking technologies.
    So you have to be rich to be an audiophile? Thanks for the 411, but I do not subscribe to your aristocratic values, sir.
    I said nothing of the sort. I simply stated that audiophiles don't buy $300.00 AVR's. Most of them most likely aren't buying their gear at Best Buy either, at least not outside of the Magnolia section. Most audiophiles are still buying seperates rather than an AVR because let's face it, for music, which is what most audiophiles really care about, $300.00 AVR's simply aren't that great.
    However, $300.00 AVR's can be great for multichannel. The basic internals like the DSP are the same across most model lines on most companies AVR's. The differences in price comes solely from things like the number and types of connections, network or serial connectivity, and the software features in the AVR. Most AVR's under $300.00 don't come with helpful features like Pinking Tools (Audyssey MutliEQ, EzSet) or volume balancing and loudness adjustment features like Audyssey Dynamic EQ and Volume.
    For that price getting MultiEQ, Audyssey Dynamic EQ and Volume the Denon is a great bargain for anyone that's looking for an entry level AVR.

  • Ports Crystal Reports uses when Connecting to a Universe as a Data Source

    I have a couple of Crystal Reports that use universes as a data source.  On my Windows 7 machine I am getting an error message that "Logon Failed", rather opening and running the same report on my Windows XP machine, I get the results from the universe as expected.  I have tried multiple universes that report against different databases (Oracle, SQL Server, Sybase, etc) and I am getting the same vague error message on my Windows 7 machine with Crystal Reports 12.3.0.601. 
    Can someone please tell me what ports are being used within Crystal Reports (other than 6400) when connecting to the CMS and pulling back data from a universe?  The odd thing, is that I can connect to the CMS, see the universes that I have permissions too and even see the objects within the universe, but I cannot view the results.  This is a pretty high priority for us, so I would appreciate any feedback possible.

    Hello,
    "Seems contrary to the concept of isolating users (in this case designers) from connection details. I can only be hopeful that report users will not also have to have connections configured on the local workstations to view these reports ;-)"
    As long as you use/set Saved Data with the reports then they don't need the client installed. If they hit Refresh to update the data then obviously they need to be able to connect to the data source, how else are they going to get it.
    Think about it, you sit down to write a report off of a database you don't have access to? How are you going to create a report....
    If you planning on sending out reports for viewing only then export them to PDF or some other type, then DB connections are not an issue, the PDF's are for viewing only.
    Another concept is DB Security. Using NT Authentication or DB Authentication unless that user hitting the refresh button has access to the DB it won't prompt for log on info or if they don't provide the correct log on info they can't see new data.
    It's all about security, CR does not save the Password in the RPT file, if we did anyone could get it and hack your database.
    Not sure what your post has to do with Ports?
    If you have questions then please post, in this forum we assume post that are answered are closed.
    Don

  • What do I use when Migration Assistant reads "you might not be able to transfer using firewire on this computer"?

    When using Migration Assistant to transfer from one Mac to another Mac, as soon as I get to the point where it says to connect the firewire to each computer, it says "You might not be able to transfer using Firewire on this computer". What do I use then?

    firetruckjanet wrote:
    The G5 is running osx 10.4.11, but so is the G4.
    I don't know if it's the Tiger or the Leopard.
    10.4.x is Tiger; 10.5.x is Leopard.
    I've not used the Tiger version of Migration Assistant (just Leopard and later), and there's not much in the way of Apple tech articles for it anymore.
    Since the message says "might not," I don't see any reason not to give it a try.  At worst, it will fail and perhaps leave a partially-transferred user account on the G5.  If that happens, we can deal with it.
    I'd make sure the connections are snug and secure, and try it.
    Good luck, and keep us posted.
    I don't have any backups of the G4 and I don't have an external drive and I don't know anyone who has one.
    If your data is important to you, invest in one . . . soon, and start making regular backups.  They're not very expensive (some as cheap as $50, good ones perhaps $100). Disk drives fail, especially after a few years, other things go wrong, and even the most careful users make mistakes now and then.

  • New Mac Pro: What are You using to connect your eSATA external drives to you nMacPro?

    Hi,
    I have some eSATA external HDs that I would like to use with my 2013 New Mac Pro.
    I was just wondering what other  have been using to connect their nMPs to eSATA devices and how well it has worked.  I have seen a USB3 to eSATA cable from NewEgg.... which seems like a good idea ... if it will work.
    Thanks!

    LaCie TB HUB has two TB ports which is good for daisy chain. Has two esata ports also. I connect a Voyager bought from OWC to one sata port and that's where my bare 2.5 and 3.5 hard drives reside when I need them. The other sta port has a Pioneer 207 blu ray drive. When I sleep my 2013 Mac Pro I turn off the power to the Voyager and the Pioneer. All work flawlessly.

  • What wire to use to connect to my TV?

    I have an old white macbook non unibody and I was wondering what is the cable that I have to use to connect my mac to my sony tv to watch movies?I tried the macbook pro adapter and it seems that the port is different and it doesn't fit my old mac.

    Depends on what input plug you'll be using on your TV. VGA, DVI, Composite or HDMI. You'll need a Mini-DVI adapter and a cable from that to your TV. Here's the various types of Mini-DVI adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13
    (Composite is the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs.)
    You'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs for VGA, DVI or Composite. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macbo o k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable
    If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA or 3.5mm input plugs for audio with the HDMI plug. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.

  • What RapidMart is using to connect SAP R/3?

    Hi, We used Data services for mostly OLTP system and now we are thinking of using it for SAP R/3 system. I read that the most efficient method for large amount of data is to use SAP ABAP call using SAP R/3 Data flow. We can create ABAP program from DS and load in SAP system. We want to know what rapidmarts are using. I don't think rapidmart is using ABAP method to connect SAP R/3 and get data.
    Can someone clarify?
    Thanks,

    I got no reply so closing this thread.

  • What trigger to use when wanting to form commit information

    Want to commit information from form to database.
    Only appears I can use when button push
    The on validate record does not facilitate form commit
    In previous forms versions used a post update trigger
    however this one is not valid/recommended anymore.
    THX IN ADVANCE

    Thank you Sanjay for your response. I am currently using When Validate Trigger. It works for all the scenarios except when order line is cancelled.
    When line cancelled I should rewrite the order quantity to 0 and save then only DFF's are updating to 0's.
    Thanks,

  • What adaptor to use when travelling international

    what adartor can I use for international if I need to charge my iphone 4S & ipad air

    The iPad charger is international; it's rated 100V to 240V.
    It's better to use a 10W/12W charger to charge iPhone and iPad. A 5W charger will get very hot when charging iPad.

  • What can be used to connect Panasonic Full HD SD/SDHC Camcorder to the iPod

    I am thinking of buying the Panasonic Full HD SD/SDHC Camcorder which uses the new SDHC/SD Memory Card to store the movie clips. What I would like to know is there anything in the iPod accessories range, that I can connect to a Fifth Generation iPod so I can store all the clips from either the camcorder or the SDHC/SD Memory Card, so I can re-use the memory card. I understand that I will not be able view the moive clips on the iPod as the camcorder uses the AVCHD format.
    All I want to do is use the iPod as a storage unit as I will be taking the camcorder on hoilday and I don't want to buy a lots of the 8Gb Memory cards nor take a portable hard drive with a card reader.

    -I already read entirely those threads, but nothing about stereoscopic 3D AVCHD movies through USB port, on Panasonic TVPlasma3D.
    (Also, Sony said me that is not possible to play 3D videos on your 3DTV through USB port).
    I tried to made a H.264 videoclip, with .MP4 extension, at 960x1080p side-by-side layout, but nothing was displayed, and black screen.
    I think that just the AVCHD movies, with .MTS extension, that comes from Panasonic consumer camcorder "HDC-SDT750", can play the 3D videos via HDMI cable, not USB port.
    But not the exported videos from PremierePro via USB port.
    I seen this tutorial from David K Helmly:
    http://www.youtube.com/user/dhelmly#p/a/u/1/_YtF0c2bmkw
    Dave export the video from PremiereProCS5 as "MPEG2-bluray" format with "Match Source Attributes (HighQuality)" Preset, and build the Bluray Disc in EncoreCS5, with the footage as MPEG2 with .m2v file extension:
    1) Anyone tried to play correctly in 3D, those MPEG2-.m2v side-by-side files, in Panasonic3DTV, with BlurayDiscReader?
    2) Why MPEG2.m2v side-by-side?
    3) The official standard stereoscopic 3D format, is not the .MVC (MultiViewCoding) for Bluray3D Disc?
    I am confused!
    Help!
    Horsepower0171.

Maybe you are looking for

  • HT1918 why do i see contact itunes support when i'm opening an acount on my iphone or computer?

    when i'm trying to open an acount on my iphone or computer it wont open and i see the message ( PLEASE CONTACT ITUNES SUPPORT TO COMPLET THIS TRANSACTION )?? please help me to have my acount thank you

  • Connecting SAP with an independent SQL database

    Dear all, I need to connect SAP with an independent MSSQL database. My requirement is to transfer a set of records from my Ztable to a table in SQL database. I have maintained the settings in DBCO transaction. I maintained DBMS as 'MSS' in DBCO. send

  • Error in Getting Database Connection from datasource

    Hi, I am getting the following error when I tried to get the connection from the datasource object. The call is made by the client proxy and the code is getting executed on the server side.    InitialContext ic = new InitialContext();    DataSource o

  • Audition Equivalent for Soundbooth Equalize function?

    Soundbooth was a less-capable program, but for my work the equalize function was awesome. Any/every voice track, I could equalize it and it would bring the quiet parts up and hold the loud parts, even if the quiet part was like just one single word o

  • Facinate and Flash 10.1 mobile

    Do I have to wait for Andriod 2.2 for Facinate or is there a way to update from Flash mobile 9 to 10.1? I receive errors to upgrade from Flash 9 to Flash 10.1 when opening videos.