What action required for Cisco Unity 8 if i am migrating Active Directory Forest

HI
Currently we have running cisco unity 8.0 in our environment. Now we are planing to change our domain name ( i.e from abc.com to xyz.com ) for that change what is the procedure to change the Cisco Unity Server domain name. We need to do anything on cisco unity software or just we neeed to change the domain name of the appliance.
Please share your ideas.
Thanks

Renaming a Cisco Unity 8.x Server or Moving a Cisco Unity 8.x Server to Another Domain
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/upgrade/guide/8xcurug080.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Similar Messages

What is required for Cisco WSA SensorBase network to work ?

Hello !
I would like to know if the Web Security Appliance has to have a public address to receive the data collected by SensorBase network.
Is there any additional requirements ?
Thank you for your answers.
Stephane Walker

Hi Stephane,
The WSA will somehow connected to the Internet directly or via a firewall with your external IP address in the egress point.
SensorBase participation is working via URL via wbnp.ironport.com:443
Depending on your routing, you can test if your WSA can reach this URL from its interface.
I hope this helps.
thanks,
Donny
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

HT201365 I like the additional security features but don 't want to type in a password every time I use my phone. How can I turn off the requirement for a password but leave "Find my Phone" active?

I like the additional security features but don 't want to type in a password every time I use my phone. How can I turn off the requirement for a password but leave "Find my Phone" active?

Settings>General>Passcode Lock...enter your passcode, then: Turn Passcode Off.

Is it possible to map a Sponsor Group in Cisco ISE to a user group in Active Directory, through a RADIUS server?

Hi!!
We are working on a mapping between a Sponsor Group in Cisco ISE and a user group in Active Directory....but the client wants the mapping to be through a RADIUS SERVER, for avoiding ISE querying directly the Active Directory.
I know it is possible to use a RADIUS SERVER as an external identity source for ISE.....but, is it possible to use this RADIUS SERVER for this sponsor group handling?
Thanks and regards!!

Yes It is possible to map Sponser group to user group in AD and if you want to know how to do please open the below link and go to Mapping Active Directory Groups to Sponsor Groups heading.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_guest_pol.html#wp1096365

Requirements for Cisco Jabber Applications

Hi,
I have to setup a lab enviornment for demonstrationg the Jabber technologies for our client.i am really new to jabber technologies and as per my understanding its a Softphone that we can install in PC and Mobile and has the features such as IM,Presence and Web-ex.
For my demonstration I am looking to Install the softphone in a windows PC.
My doubt is what all software combination required for Jabber technologies??
1)Either CUCM+Presence+Jabber(What Versons??)
2)CUCM+Jabber.(Versions??)
We have 3 MCS in our lab and running CUCM version 7.0.If we need a later version for this to support ??
I serached in google for good document but no luck.....Please give me a good documents for integeration and configuration for this requiremnets.
Thanks in advance.
Nithin louis.

Hi Nitin,
May be you can follow these links to get started:
https://supportforums.cisco.com/docs/DOC-23292
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_00.html
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/jabber/Android/8_6/b_Cisco_Mobile_for_Android.html
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_01.html#CJAB_TK_D698EA8E_00
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_010.pdf
Hope this helps.
Please rate helpful posts!!!
regards,
Abdul

I am trying to add a note in numbers when I can link an action required to my calendar... Is this possible? For example I am using numbers like a CRM and I would like to be able to have my next action required for a customer link to my calendar

I am using numbers as a CRM and one of my columns is called 'Next Action Required' i.e
Next Action Required
Email Douglas on the 02-12-14 about information needed for tour
Call Thomas 0446 393 about booking trip
Thank you in anticipation
Doug

Utterly bizarre. I can't see your two follow-up posts when I'm logged in. However...
Things would be simple if Apple implemented Data Detectors for dates in Numbers, as they have in applications like TextEdit and Script Editor. Then you’d have a system-level means of quickly moving from a selected date in your CRM spreadsheet to Calendar.
Until that happy day arrives, though, we can approximate it with AppleScript and Automator.
First, make sure your Numbers table is called CRM and your column has the header Next action required. (You can change these if you want but you’ll also have to modify the script.) This is the basic setup:
Then, launch Automator and create a new workflow. From the Choose a type… dialog, specify Service.
At the top of the workflow, “Services receives selected…” should be set to text in Numbers.app. (You'll need to choose Other... from the pop-up and then navigate to Numbers.)
In the Library menu at the left, click on Utilities, then drag a Run AppleScript action into the main Automator pane. Delete all the boilerplate text from the script.
It should look like this:
Now copy and paste the script below into the Run AppleScript action.
on run {date_string}
tell application "Numbers"
tell document 1
tell active sheet
try
set crm_table to (item 1 of (every table whose name is "CRM"))
on error
display dialog "No CRM table in this sheet"
return
end try
tell crm_table
try
set the_selection to selection range
set the_row to row 1 of the_selection
on error
display dialog "Select some text in a cell"
return
end try
set the_col to item 1 of (column of the_selection)
set header_cell to cell 1 of the_col
if value of header_cell is "Next action required" then my run_calendar(date_string)
end tell
end tell
end tell
end tell
end run
on run_calendar(date_string)
try
set date_string to date_string as string
set real_date to date (date_string)
on error
set real_date to (current date)
end try
tell application "Calendar"
activate
switch view to day view
try
view calendar at real_date
on error the_err
display dialog the_err
end try
end tell
end run_calendar
Click the little hammer at the top to make sure that the script compiles (indents and colours in). If it doesn’t, you may need to sort out some line breaks in the copied and pasted script.
Now save the workflow as Go to date in Calendar. Quit Automator.
So what does the script do? Basically, it looks at the selected text in a Numbers cell and checks to see that the table name is “CRM” and the column header is “Next Action Required”. It then tries to convert the selected text into a valid date. If it can, it takes you to that date in Calendar. If it can’t, it takes you to today’s date. In both cases it switches Calendar to day view. You have to bear in mind that if you select all of “10/10/14 Call John re contract” it won’t understand that part of this is a date, and won’t go to October 10. You'd have to select just "10/10/14"
To run the Service, right-click or control-click on the selected text and go down to Services, then choose Go to date in Calendar:
Alternatively, run it from Services in the main Numbers menu.
You can set up a keyboard shortcut for any Service in System Preferences - Keyboard - Shortcuts. Post back if you need more info about this.
Tested with Numbers 3.5 (2109). This will not work with Numbers '09.
Hope this works for you, let us know how you get on.
H

Questions on SETSPN syntax and what is required for MANUAL AD auth

I'll preface this by stating that I don't need to do all the extra stuff for Vintela SSO, SSO to database, etc. I just need to know precisely what is necessary to do to get AD authentication working. I managed to get it working in XIr2 previously but it's been so long and I'm not 100% sure that everything I wound up doing was absolutely necessary that I wanted to sort it out for good as we look at going to XI 3.1 SP3.
In the XI 3.1 SP3 admin guide, page 503, the SETSPN command which is
used as part of the setup process to establish a service account to
enable AD authentication is outlined as follows:
SETSPN.exe -A <ServiceClass>/<DomainName> <Serviceaccount>
The guide suggests that the <ServiceClass> can be anything you want to
arbitrarily assign. If I choose something other than the
suggested "BOBJCentralMS" value, is there anywhere else I have to
specify this value to allow the service account to function properly?
The guide suggests that the <DomainName> should be the domain name on
which the service account exists however I've seen many posts online which seem to
indicate this <DomainName> should actually be the FQDN of the server
running the CMS service instead of the general domain name.
Clarification there would be very helpful if anyone has some insight.

The CMS account can have an SPN of spaghetti/meatballs, there are no requirements (cept 2 characters on each side of the / I believe). The SPN created should be the value entered in the CMC > Authentication > Windows AD
The account must run the SIA and it therefore must have AD permissions. Now if you are using IIs or client tools you don't even need an SPN. The SPN is for kerberos only which is required for java app servers.
The vintela SSO white paper in the this forums sticky post explains the roles of a service account.
Regards,
Tim

Specific UME Actions required for Deployement in CE 7.1

Hi Experts,
I need to know how many and which UME action are required for deploying the application in CE 7.11
For deployement, we usually assign the UME Role called "Administrator" to the ID that we use for deployment.
If I remove this "Administrator" UME role, an error message is thrown as...
com.sap.ide.eclipse.deployer.api.APIException: DeployException,cause=ERROR CODE DPL.DCAPI.1023AuthorizationException
This "Administrator" UME role has some 2978 UME Actions assigned to it.
For the UME role "Administrator", inside the assigned UME actions, I have tried filtering the UME Actions based on the filter keyword "deploy", which returned some 14 UME actions.
Now, I have made following Test case and result.
Test Case:
1) Remove the Administrator Role from the ID that is used for deployement.
2) Now Assign all the above 14 UME actions that were found related to "deploy" keyword to a Custom UME role "DeployRole".
3) Deploy using the same id.
Result : Deployement fails with the same above mentioned error.
Conclusion: There can be 2 possible conclusions...
1) None of the above 14 UME actions provide the authorization for the deployment.
2) OR There are some other UME actions which might have some dependecies that are required along with the suspected UME actions.
In short my requirement here is, to find out the specific UME actions that are required for deployment, so that i can remove the "Administrator" UME role and assign the specific UME actions needed for deployment to a my Custom UME role, and assign this Custom UME role to the user ID for deployment.
Regards,
Shreyas Pandya

Hey Nghia Nguyen...!
Thanks a lot for your reply, i have rewarded you the points.
I have found out that for deployment following UME actions are required.
dc_action (Mandatory)
auth.all.all (Mandatory)
deploy_action (Not Mandatory)--> if you remove this deploy_action UME action the deployment will still work, but in developer studio, the Deploy result dialog box with OK button, that pops every time after you deploy your project by right clicking your application and choosing "Deploy new Archive and Run" will cease to appear and the application will directly run in the browser.
Regards,
Shreyas Pandya

What legal requirements for releasing an Microsoft Excel add-in?

Hello,
We developed an application to be released as a Microsoft Excel add-in. What are the legal requirements for releasing an add-in? We are located in Manitoba, Canada.
Kurt Jakob,
C.E.T.
Certified Engineering Technologist
Horizon Innovations

You are free to release the add-in any way you want - for free or commercially. There are no legal requirements.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

What is Required for Distribution of Desktop App

Hi,
I'm trying to figure out what is required to distribute JMF. I don't want to make users install an executable, I just want to include required JARS/data files/libraries for a streaming webcam (no audio). (I have read the README and searched all over online, but I'm still not sure)
I create my app, and I have customizer.jar, jmf.jar, jmf.properties, mediaplayer.jar, multiplayer.jar, sound.jar in the lib folder. Although I only need the jmf.jar, and possibly the jmf.properties? I am using NetBeans.
Anyways, I still can't get it to work on another WinXP computer. If I disconnect my camera on my computer, the app still knows what type of device camera it is looking for (vfw:Microsoft WDM Image Capture (Win32):0), but when I trying to run it on another computer with or without the camera connected , it doesn't seem to know because no devices print out when I print the list.
Thanks for your time, I am out of ideas.
J

806359 wrote:
Captfoss,
Do you know where I can find a programmer's guide that explains the Dll's that I need to include for JMF distribution without the installer? I can't find documentation anywhere. The Windows delivery doesn't seem to include any, so I guess they are only installed with the executable installer?AFAIK, there isn't one...
Or better yet, do you know much about DirectShow? or can you point me to a nice replacement to JMF, possibly one that has some JNI included? I just want a lightweight simple video framecapture support on Windows 7. ( I have read that JMF might not work on Windows 7 anyways) I can't believe I haven't found anything good online yet, maybe I am looking in all the wrong places.Adobe Flex and Silverlight 4 are probably the most commonly used "new" technologies for dealing with AV data... You can use C/C++/C# to use some native AV libraries, but as far as using Java, there really isn't much support for video because you really need lower-level access than Java provides to take advantage of things like hardware acceleration and such...
So all of the Java APIs (JMF, FMJ, Quicktime for Java, etc) are essentially Java wrappers for native code... so those are the 3 things I'm aware of that do AV in Java...

SNMP Configuration for Cisco Unity

Dear All,
Can you please tell me how i can configure SNMP on my Cisco Unity.
Please help me.
Regards,
Malik.

Dear All,
Can you please tell me how i can configure SNMP on my Cisco Unity.
Please help me.
Regards,
Malik.

What DVD Require for AIX IBM

Dear All,
Please Suggest me We want install SAP 2005 On AIX IBM
What DVD Change for AIX IBM Os.
We want to install SAP on AIX IBM Operating System so We have all sap DVD for windows
IS any difference for AIX IBM Os.
Thanks
Kumar

"SAP 2005" is not a product. Contact you SAP Sales Representative to help you define which SAP product is best suited for your business needs

Cannot get Unity 8.0 to syncronize with Active Directory

Hi All,
any help/advice will be greatly appreciated here. Pulling my hair out on this one. So we installed our CUC 8.0.2 a few years ago. At the time, CUC was setup to sync with LDAP, our windows AD. Filters were defined, etc. All has been fine until recently. Unfortunately I cannot define recent - not sure when this started. I normally don't deal with CUC, but I am now. Basically we either modify or add users in AD and they are not showing up in CUC->users. I actually have 1 user where this person took over for another and in CUC/users half their info is the last user and half is the new user. Weird stuff.
I don't know what the issue is. To my knowledge nothing has changed either in CUC or AD. I attempted a wireshark sniff only to find out that infact LDAP queries were successful from my unity server to domain controller.
I then turned on dirsync on one of the unity servers, looked at the logs using the RTMT and specifically dealing with the user above, I see that unity successfully queries AD and AD cleary responds with the user attributes. But even in the log it states that nothing has changed with the user. I went a head and changed some of the attributes on the user that are mandatory in our CUC setup, performed another sync, and still no change.
I have 3 domain controllers, 2 unity servers (sub and pri). No matter which unity server I attempt the sync from or which domain controller I list as #1 on the list in the CUC setup, no changes are made. This is really frustrating. I have 1 windows 2008 R2 DC and 2 windows 2003 DC's (at present time) each is also a GC.
I rebooted both unity servers (utils system restart) waited a while after the first server rebooted came back online before I did the second. Still no change.
Can anyone suggest where I can look to find the answer as to what is going on?
thank you in advance for any ideas.

Renaming a Cisco Unity 8.x Server or Moving a Cisco Unity 8.x Server to Another Domain
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/upgrade/guide/8xcurug080.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Cisco ISE Failure: 24408 User authentication against Active Directory failed since user has entered the wrong password

Hi,
Since we implemented Cisco ISE we receive the following failure on several Notebooks:
Authentication failed : 24408 User authentication against Active Directory failed since user has entered the wrong password
This happens 2 or 3 times per Day. So basically the authentications are working. But when the failure appears, the connection is lost for a short time.
The Clients are using PEAP(EAP-MSCHAPv2) for Authentication. We've got a Cisco Wireless Environment (WLC 5508).
Why is this happening?
Thanks,
Marc

The possible causes of this error message are:
1.] If the end user entered an incorrect username.
2.] The shared sceret between WLC and ISE is mismatched. With this we'll see continous failed authentication.
3.] As long as a PSN not receiving a response from the supplicant within this limit during an EAP conversation, it will throw this error code. In majority of cases it says eap session timed out.
In your cases, the 3rd option seems to be the most closest one.
Jatin Katyal
- Do rate helpful posts -

Cisco NSS 322 not staying connected to Active Directory.

Hello,
We recently deployed a NSS 322 in our office, and connected it to our windows 2003 domain controller (running as a VM). It seems every morning that i need to log into the NSS 322 and reconnect to the active directory (Network Services -> Microsoft Networking). After i do this, everyone is able to connect to the shares on the NSS 322.
Just to add, we do not have any issues during the day with the active directory authentication, it seems to only occur over night when no one is using the shares.
Does anyone have any idea why this would be happening, or any solutions to resolve or minimize its occurrence.
Cheers,
Walter.

Hi,
Please maske sure you are running on the latest firmware 1.3.0.5 .(always make sure data is backed up)
Make sure write cache is disabled.(since it's VM)
Make sure the NSS time is pointed back to your PDC
We have a couple VM running 08 Server; hadn't run into any issues.
If this doesn't fix your issue, please call in for support 1-866-606-1866
Thanks,
Jason Bryant
Cisco Support Engineer

What action required for Cisco Unity 8 if i am migrating Active Directory Forest

Similar Messages

Maybe you are looking for