What adapter to connect my Macbook Pro to projectors?

Hi All,
For the last year I've been using my old WIndows laptop when doing presentations out at client sites purely because it's what I was used to, and in almost every single case, the client will provide a VGA cable to plug into my laptop (which connects to the projector they provide) so it was SAFE and RELIABLE every time.
However it's gotten to the point where I'm way more comfortable with my Macbook Pro and want to know exactly what cable I shoudl take to client sites to ENSURE that I will always be able to connect to their projector. I'm wondering if it would be some sort of HDMI to VGA cable? I've noticed some mini displayport to vga cables online but I don't think my macbook has that port. Do I need it to be HDMI to 'female' VGA or male? I want to ensure I have all bases covered, because there's nothing more stressful or daunting than going to do a large presentation and being unable to connect!
Any help would be appreciated. and any other tips/advice is welcome for using a macbook for presentations with projectors etc!
I'm using MacBook Pro Retina Mid 2012 w/ OS X Mountain Lion 10.8.3
Cheers,
Manachi

Your Thunderbolt ports 'double' as Mini DisplayPorts so if the projector uses VGA for an input, you could use this adapter, for example, to output from your MacBook Pro to VGA.
Monoprice has just about any adapter that you could need.
Good luck,
Clinton

Similar Messages

Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

No. You need a converter box like this to go with your MDP-VGA adapter:
http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2

What is the correct adapter to connect my Macbook pro with mini-dvi to my TV with Scart

I have a MacBook Pro with mini-DVI and I want to connect it to my TV which has only a scart thing.
Can I use the mini-DVI to Video-Adapter and then a Video to Scart-Adapter?
Thanks for your help!

So of course you've corrected the title : "What is the right PLUG to connect my macbook pro to my TV ?"
OK so a bit more info : my TV is a Sony Trinitron TV.
It has the yellow/red/white plugs. I don't believe it has anything more sophisticated or recent than that.
Thanks for your help !

Thunderbolt Ethernet adapter not connecting on MacBook Pro Retina

I recently purchased the Thunderbolt to Ethernet Adapter to connect to my 13in MacBook Pro Retina Late 2012 (Mountain Lion 10.8.2) to a hardwired internet connection for faster downloads. However, when I connect the ethernet cord to the adapter nothing happens and only the wifi connection is identified.
Ethernet or Thunderbolt Ethernet are not an option in the System Preference > Network. Also, either connection are options when trying to add a network interface ( System Preferences > Network > + > Interface).
I have tried several fixes like Resetting PRAM or Removing Network Preferences File. The NetworkInferences.plist and Preferences.plist files did get recreated after reboot, but only the WIFI interface shows up.
http://tearfulwolfstudios.wordpress.com/2012/03/13/reset-network-preferences-osx /
http://rohanradio.com/blog/2012/02/27/fixing-thunderbolt-ethernet-on-the-macbook -pro/
I am sure the Thunderbolt ports are functional since I am able to connect my display using Mini DisplayPort to DVI Adapter
Could I have corrupted the Network Preference File or is could the Thunderbolt to Ethernet Adapter damaged?
Please help.

I had this problem, too, and an Apple Support call and Genius Bar visit later, I had the answer: if you're using Network Locations that preexist your Thunderbolt display, it doesn't seem to auto-add the possibility of "Display Ethernet" to your available network ports. To solve this, either:
Create a new Location in your Network system preferences. It will finally detect the "Display Ethernet" and use it. It'll slowly change from disconnected to No IP to green-is-for-go.
or
Fix an existing Location by clicking the + to add a port and choosing Display Ethernet. It'll slowly change from disconnected to No IP to green-is-for-go.

What cable/adapter do I need to connect my MacBook Pro to a Sharp Aquos TV?

What cable/adapter do I need to connect my MacBook Pro to a Sharp Aquos TV?
I want to watch videos on youtube or read articles on my laptop, and I want a cable/adapter that will hook up the Macbook to the TV and display the webpage that is on the laptop.

Of course it doesn't. But you can buy an adaptor from HDMI to the Mini-DisplayPort port on the computer.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

EXACTLY what cable(s) do I need to connect my MacBook Pro (early 2011) to an external display with a 2560x1440 resolution?

I am trying to connect my MacBook Pro (early 2011 w/ Intel HD 3000/ 384Mb) to an external display with a 2560x1440 resolution. Specifically, what cable/connections do I need to display at this resolution? I cannot get the display to work using a "Thunderbolt to HDMI" or a "Thunderbolt to DVI" connector. Note: I used both older and newer (uni-directional) HDMI cables on the first config, and a Dual-link DVI cable on the second config. Apple specs state this is possible ( support.apple.com/kb/SP619 ), but I am at a loss as to how this can be done. Thanks in advance for the help!

You use a Mini DisplayPort to either HDMI or dual-link DVI adapter. If that component doesn't work, something's wrong with either the cable or something else in the connection.
(112855)

HT1338 What cable do I need to connect my macbook pro to my television(hdmi)?

What cable do I need to connect my macbook pro to my television(hdmi)?

If your Macbook has a Mini Display port and you want to connect it to an HDMI input on your TV you can use the Apple adapter available here;
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er
A similar, non-Apple connector is available on Amazon here:
http://www.amazon.com/DisplayPort-Female-Adapter-Macbook-Pro/dp/B002HU629E/ref=s r_1_1?ie=UTF8&qid=1325274750&sr=8-1
Hope this helps.

What cable do i need to connect my macbook pro to the hdmi input on my tv?.

what cable do i need to connect my macbook pro to the hdmi input on my tv?.

hi Sam
It's actally an HDMI adapter that Apple sells.
You hook the small adapter up to your MBP and then HDMI cable to your TV. Please note adapter is for HDMI compliant for HDMI rev 1.3 and above:
My TV, which has DVI port also, besides HDMI gets its best resolution by DVI of which also sell at Apple store for the MBP.
Bottom line is check w/ your TV manufacture to be sure your flat screen supports 1920 X 1200.
Let 'er rip and...
cheers

What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...

As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.

Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections.

What cable do I need to connect my MacBook Pro to my TV?

What cable do I need to connect my MacBook Pro to my TV?

If your Macbook has a Mini Display port and you want to connect it to an HDMI input on your TV you can use the Apple adapter available here;
http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er
A similar, non-Apple connector is available on Amazon here:
http://www.amazon.com/DisplayPort-Female-Adapter-Macbook-Pro/dp/B002HU629E/ref=s r_1_1?ie=UTF8&qid=1325274750&sr=8-1
Hope this helps.

What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

Hello Alex,
It sounds like you are getting excessive CPU usage when connecting an external display via HDMI to your computer. I would try the troubleshooting steps outlined in the article named:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the systemYou can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Cheers,
Sterling

What is the best way to connect a MacBook Pro to my HiFi system ?

Hi,
I'm new to Apple support communities having just bought my first Macbook Pro (a 17" 2.5GHz i7 model) and this is my very first community post.
Im a bit of a Hi-Fi enthusiast, so, with my new MacBook Pro I've taken the opportunity of completely reloading my iTunes library in high quality Apple Lossless format. Took a while but now I've completed the task Im pleased I've done it.
My question is, what is the best way to connect a Macbook Pro to a high quality Hi-Fi preamp - my Hi-fi system is musical Fidelity, and the pre amp (an A5 CR Pre amp) and this pre amp, which has superb audio quality, only has analogue phono inputs ?
I'm interested to understand what both the wired and wireless connection options are. I'm guessing one option must be to use the headphone output, but I have no idea if the output from the headphone socket on my new macbook (which is presumably designed to drive headphones) would be at a suitable level for a phono line level input ?
Ive also read a few comments about using digital connection - and my second question would be - what is the audio digital connection on my macbook ?
Aplogies if this question has been asked lots of times before but I've looked through some previous posts and can't find any answers in simple and straightforward language concentrating on the issue of connecting a MacBook Pro to an analogue phono pre amp input ?
Thanks in anticipation of some advice.

What is the best way to connect a MacBook Pro to my HiFi system?
Look at the back of the reciever and see what your connection options are, the front headphone jack is output usually.
The Mac's analog audio in/out ports doubles as a optical in/out ports.
The analog won't over power your amp, it's just a headphonejack, like a powered mic, just enough power to get the signal to the destination in one piece.
Since you have a analog amp, your stuck with inferior analog connections, however you mentioned you wish to listen to the best sound quality of your lossless music.
To do that your going to need a decent surround sound system with Toslink optical import jacks, a Toslink stereo jack to regular Toslink adapter, Toslink cable and enable the optical output in your System Preferences >Sound
Another method is to use a Airport Express, it also has duo analog/opical out port. Then set up the Airport Express for iTunes streaming using the Airport Utility, then in iTunes setup the lower right corner one can set the connection.
I recommned a Harmon Kardon surround sound system, with their 100 watt satelight speakers and the 200 watt subwoofer. Enable the "concert hall" and other neat effects which will turn your 2.0 (stereo) iTunes music into 4 channel speaker sound filling the room with music and sending the lower channels to the subwoofer.
It will likely bring tears to your eyes that you can actually hear the full quality of your music as intended, I almost quarranty you will never want listen to music on a crappy iPhone or iPod again.
If a surround sound system is out of your budget, you can get by using the Harmon Kardon "Go Play" portable stereo and a analog stereo cable.
If your going to use your analog amp to power reference speakers, then there are various analog adapters of all sorts to make the appropriate connections once you know what they are, check out Radio Shack online for them.

HT201300 What cable should be used to connect a macbook pro, 13 inch early 2011 model to an external projector so it will display the computer screen image through the projector?

What cable should be used to connect a macbook pro, 13 inch, early 2011 model to an external projector so the project displays the image on the computer screen?

You will need a cable or adapter with a minidisplay connection for the MBP. That will be inserted in the Thunderbolt port. The other end is dependent upon the connections of the projector which you have not listed.
Ciao.

What do i need to connect my macbook pro to my samsung widescreen tv?

My Samsung Widescreen TV has a hook-up (15 pin connector/serial port?) for a PC. What do I need to do to connect my MacBook Pro to it and can I use the TV as the monitor or for viewing an internet website? I'm trying to use the larger screen for a meeting of several people to discuss website improvements?
Thanks

If you can tell me whch TV & MBP you have i can give you exact cable part numbers and settings but short of that i'll try & see what i can do for you. Older MBP do not support audio over the HDMI & by default VGA doesn't either so will need an audio cable in addition to the video regardless which input you use. aparently newer MBP Do support audio over HDMI so as long as your TV does also you're a one cable hookup. My Samsung has a specific HDMI port labled DVI/ HDMI which accepts a cable i got at the apple store & simply plug play. Look in your samsung manual to verify what resolutions the TV suppports, select the input & mode from your menue and set the resolution & you should be good to go. Obviously you'll need to do a little tweaking inorder to optimize the screen but assuming you're familliar with your mac to begin with it's a no brainer. you might not be able to run optimal resolution on the TV untill you close the lid (clamshell mode) on the MBP which means you need a key board & trackpad or mouse. on the other hand if you are attempting to mirror the displays or use it as a 2nd display those modes are also available from the MBP setup. you can detect & gather your screens & calibrate the screens right on the MBP (under dispalys) and once you have the TV reckognizing the input it's nothing but a monitor. now all of the above assumes you are NOT running Lion as i'm NOT. I hope this at least gets you in the ballpark.

What adapter to connect my Macbook Pro to projectors?

Similar Messages

Maybe you are looking for