What adapters are required to connect the shuffle to a speaker?

Can a Shuffle be connecter to an external speaker? If so, what adapter is required?

now to my question - what components would be
required to develop and run a program in writtenin
java that would be able to fulfill therequirements
and how can I tell if these components areavailable
on
the windows 2000 server where the databaseresides?
J2SE SDK, the JDBC tutorial, the JDBC driver class
for the database (should come with the DB). that's
all.thanks for the response.

Similar Messages

  • What steps are required to configure the Payroll Tax ( USA)?

    Hi All,
    Please answer
    What steps are required to configure the Payroll Tax ( USA)?.
    Thanks in Advance
    Thank you,
    GKReddy.K

    hi Dan
    this is covered in the Rapid Clone documents -- Refreshing a Target System
    Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
    Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
    you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
    adcfgclone will not be necessary on the application tier.
    Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
    Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
    source;- https://forums.oracle.com/thread/652681
    AppsMasti
    Sharing is Caring

  • What roles are required to run the export import?

    Hi,
    I want some info on roles are required to run the export import.
    I have done the following in sys user:
    GRANT EXP_FULL_DATABASE TO IMP_TEST
    GRANT IMP_FULL_DATABASE TO IMP_TEST
    But Doing the above command the IMP_TEST will get all priviles (also the system tables)
    Is there any mechanism to restrict the user to export and import only the tables not anything?
    Thanks and Regadrs

    Hi!
    If you create a user like this
    CREATE USER imp_test identified by password;then the user will be able to import or export only its own schema. If you grant the exp_full_database and imp_full_database roles to this user like you did then the use will be able to export or import the hole database (with SYS schema). But as far as I know you can't set any more restrictions to the user.
    yours sincerely
    Florian W.

  • What rights are required to connect to WSUS server usig console

    Hi all,
    I have a WSUS server installed and it is joined to a domain. Another user from domain needs to connect to this WSUS server using a WSUS Management console. What rights does this user needs to be given on WSUS server so that he would be able to connect to
    server and be able to release patches?
    Regards, Darshan G. Parab

    What rights does this user needs to be given on WSUS server so that he would be able to connect to server and be able to release patches?
    The domain user should be added to the local WSUS Administrators group to be able to approve patches.
    I would suggest creating a Domain Security Group, adding the domain account to the Domain Security Group, and then adding the Domain Security Group to the WSUS Administrators local group on the WSUS server. However, while this is a more conformant way to
    configure the security, it also requires the user to logoff/logon (to get the domain group SID in the user's account token) and it requires the WSUS server to be restarted (to get the domain group SID in it's computer account token).
    You may determine that adding the domain user direct to the group is a necessary short-term implementation, and defer the use of groups until such time as the WSUS server can be restarted (which, given that yesterday was Patch Tuesday, will probably be in
    the next few days anyway).
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • What cables are required to connect Mid 2010 MacBook Pro to my TV?

    Hi,
    I've seen a number of forum posts stating that there are mixed issues with different models of MacBook Pro's and connecting to your television. I have a mid 2010 model, 2.53 GHz Intel Core i5, purchased in August of that year.
    I have an Apple TV hooked up, which is fab for my iTunes music, pics and movies, however I'd like to get the SkyGo/Anytime+ working but can only do so by buying an X-Box or a cable - You've guessed it, the cable wins!
    Would someone please be able to point me in the right direction? Some of the info I have found is quite conflicting.
    Many thanks in advance.

    Assuming your TV has HDMI inputs, you will need a mini-Displayport-to-HDMI adapter that supports audio, and a standard HDMI cable of the appropriate length. Your MacBook Pro outputs an audio signal through its Mini-Displayport, unlike earlier models. Once you make the physical connection, you'll have to select the proper HDMI port as the input in the TV's menu system, and select the TV (or perhaps "HDMI") as the output device in the Output tab of the Sound pane in System Preferences on the Mac.
    Conflicting information most often gets posted here when responders are guessing about the equipment being used. You've done a good job of identifying your MBP model, so answering your question with assurance is easy.

  • What cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    what cables are best when connecting apple tv, my HD tv has 2 HDMI slots but they are both in use, one for Sky and one for cinema. There are no hdmi slots spare on the cinema either ...

    Mine has four  Seriously shauntana the splitter is easy, a simple click to changre feed and eventually you will damage the HDMI port or cable by taking it in and out.  True you can only use one feed at a time nut you can only use one port on the telly at one time too.  I used it on my old one port telly for PS3 and Sky and it worked a treat.
    Enjoy
    Jules

  • What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

    hai friends
    what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
    Thanks a lot
    Regards
    VinayKrishna

    Hi Vinay,
    1. For DP_PROC_TY  you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might  have created.
    2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
    3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
    Ragards,
    RRK.
    Do reward points for useful answers
    Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
    Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

  • What wires are needed to connect to a projector

    What wires are needed to connect a macbook to a projector

    A VGA or HDMI cable (Perferably HDMI). But you need mini-displayport connectors to the specific cables.

  • What roles are required to use Guided Procedures?

    Hi ,
    What roles are required to use Guided Procedures?
    Thanks
    Srinivas.K

    Hi,
        Refer this block  https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
        This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
    Thanks,
    satheshkumar.R

  • What locks are required on a table when Oracle is processing an UPDATE

    What locks are required on a table when Oracle is processing an
    UPDATE statement?

    Welcome to the forum!
    Whenever you post provide your 4 digit Oracle version.
    >
    What locks are required on a table when Oracle is processing an
    UPDATE statement?
    >
    Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
    >
    Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
    >
    The above describes the locks when you, the user, tells Oracle to lock the row.

  • What amps are required to charge an iPhone 5s

    what amps are required to charge an iPhone 5s

    watt = amps *volt
    this mean
    amps = watt / volt
    the ac charger is 5Watt and 5volt
    so 1 amp
    but the phone also charge at usb which in some cases is 5volt 0.5amp == 2.5watt
    are you looking for how further down then 0.5 amps you can go ?
    the lower the amps the slower it charges

  • GRID Control Server (OMS) - what services are required?

    What services are required (and what is the startup order) on the Windows 2003 GRID Control Server (OMS). The target database is 10g on Solaris.

    Hi.
    I assume that you have three folders in the oms installation folder, called oms, agent and db.
    You should first start the grid database on the 2003 server along with the listener from the db folder.
    Than you should install the application server processes by running:
    opmnctl startall from the oms\opmn\bin - folder.
    Than you should start the agent by runnint agent\bin\emctl start agent
    You should further start the agent on the Solaris node and verify the upload to oms:
    $ORACLE_HOME/bin/emctl start agent
    $ORACLE_HOME/bin/emctl status agent
    Good luck
    rgds
    Kjell

  • Is it possible to define what clients are allowed to connect?

    Hello,
    under certain circumstances i would like to have the possibility to define what clients are allowed to connect to the database. I was trying to find something like an "access list" for the listener configuration in which one can define what computers will be allowed by the listener to connect to the db, but unfortunately i didn't succeed.
    Do you know if something like this exists? (its about an old 9.2 db...)

    Sorry, it seems this already is what i was looking for:
    http://www.dba-oracle.com/security/node_filtering.htm
    I will give it a try
    kind regards

  • Hyperion Planning Fusion Edition, what components are required?

    Hello,
    Currently we're planning to install Hyperion Planning Fusion Edition, but we're not certain what components are required if we want to use Planning with EPMA/BPMA. Can someone post a list of components/applications required?
    Additionally, where from can we download Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition, v11.1.1.1.1? The documentation states that such a version exists, however we're unable to locate it on Oracle's web pages.
    Thank you
    Regards
    Marcin Stawny

    Hi,
    You will need the following :-
    Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.1.1.0
    Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.1.0 - Part 1-3
    Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition Release 11.1.1.1.0
    Oracle Essbase Client Release 11.1.1.1.0
    Oracle Essbase Server Release 11.1.1.1.0
    Oracle Hyperion Provider Services Release 11.1.1.1.0 (if you want to use SmartView)
    Oracle Hyperion Planning, Fusion Edition Release 11.1.1.1.0
    Oracle Hyperion Smart View for Office , Fusion Edition Release 11.1.1.1.0
    You can find the files on Oracle edelivery or here
    Cheers
    John
    http://john-goodwin.blogspot.com/
    John

  • What Files are required to install R12 VISION with out Express selection???

    Hi,
    I had installed R12 before, and i could nt received any error. installation was OK,
    Now i am installing in same way on diffrent machine now i am getting error
    E:\oracle\....\visdb\....\temp\oradun91.cmd (Some thing like that). I think i have missed some files.
    this error come at setp 1 of 5.
    when 91 files unzipped successfully.
    I want to know which file is missing. LOG file does not shows the name of missing of folder or directory name.
    What Files are required to install R12 VISION with out Express selection on Windows server 2003.
    so that i extract that file again.....
    thanks a lot
    regards.
    kalash

    Please check the following log files for any further details about the error:
    1) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>.log
    2) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/dbInstall.log
    I assume you are using the same Stage area, so it should work fine no matter what instance you are trying to install.
    What Files are required to install R12 VISION with out Express selection on Windows server 2003What do you mean by missing and required files? As stated above, you should have the complete stage area staged properly.

Maybe you are looking for