What adobe flash does my imac with OSX 10.6.8 require?
My older iMac is running Snow Leopard and for some of the software I'm running, including Facebook, I need Adobe Flash. The current version of Flash will not mount on 10.6.8 so need an earlier version of Flash.. Which do I need and how can I get it? Adobe doesn't have it available. I can't upgrade to Maverick because many of my software graphic programs (like Freehand 10) cannot run on that architecture. Have tried to download Flash 11.2 but cannot find it. Does anyone have an answer?
See if this helps:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Similar Messages
-
Unable to install Adobe Flash Player in iMAC with OS X10.7.2 Any suggestions?
Unable to install Adobe Flash Player iniMAC with OS X 10.7.2 Lion. Any suggestions?
I have administrative prviledges.
I obtained the latest version from the Adobe website.
When I double click on the .dmg file I receive a message that I need to close open browsers which I do.
Then I get a message stating that Adobe will be installed when I reopen browers.
Finally when I check the Applications folder I find a file titled: Install Adobe Flash Player.
This same application is shown in the dock.
When I click in the file in either the Applications folder or the dock, the complete installation process starts again.
Any suggestions? -
How does one install Adobe Flash on my iMac?
How does one install Adobe Flash on an iMac?
Hi,
What version of OSX are you running? Assuming it is 10.6 or greater, please visit https://get.adobe.com/flashplayer to download and install the latest version of Flash.
Thanks,
Chris -
I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.
Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print -
Does anyone else get a Netfix window popping up unexpectedly? I have an iMac with OSX 10.6.8 and Safari browser version 5.1.10. It only happens when I go to a specific local news site, and it is only a Netflix window that opens up. I do have a Netflix account.
Do you have Block Popup Windows checked in Safari/Preferences/Security?
What web site? -
My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks
Bluetooth is only supported for tethering.
Barry -
THE ANSWER TO: WHAT VERSION ADOBE FLASH PLAYER IS COMPATIBLE WITH SEAMONKEY 2.2?
I HAVE SPENT 10.5 HOURS ALL NIGHT AND INTO THE DAY ON WHAT WOULD SEEM LIKE A SIMPLE QUESTION. I HAVE SEARCHED YOUR SITE, SEAMONKEY SITE, GOOGLE, ASK, YAHOO AND SOME OTHERS I JUST CAME ACROSS. MY QUESTION IS THIS: WHAT VERSION OF ADOBE FLASH PLAYER IS COMPATIBLE WITH SEAMONKEY 2.2? I MAY BE OVER SIMPLIFYING A QUESTION THAT HAS NO ANSWER, BUT AFTER THIS LAST TIME OF ASKING, I WILL GIVE UP. I SPENT 23 YEARS TEACHING ADVANCED COLLEGE LEVEL COMPUTERS AND ESP CADD AND CAD/CAM AND NOTHING IN ALL THAT TIME WAS AS EXASPERATING AS THIS IS.
My Seamonkey version is 2.2
These are my plugins. -
I have an Imac with OSX 10.6.8 dual intel core.
Apple TV 2
Timecapsule
3G modem connected to iMac for internet access.
I have tied to get Apple TV2 to see the inernet but it does not seem to see the inernet connection either via the Airport network or even if I connect it directly with a ethernet cable to the Timecapsule or the iMac.
I have tired to set up Home Sharing but it doen't see the Itunes Store so no go.
I don't have wired internet but it is probably something to do with using a 3G modem
Any tips on how I can check if the TV coonect to internet and what to do about this problem?
I was trying to connect my HD TV earlier using a WiFi USB modem but it could not see my iMac. Apple Support told me to buy an Apple TV but that is not helping as I can't see anything there either.
Regards from MichaelThank you so much Paul_31 for your suggestions, HUGELY appreciate the effort
I have reset the printing system, a few times for good measure but nadda.
I have also looked at getting the software from the Apple site after seeing that with Snow Leopard you should let the operating system lead the install not the manufacteurers software as it is most likely out of date. I too found it wasn't there so I uninstalled the software got up the CLX_3300 series stuff then went from there with the USB cable. It apparently hasn't worked either
Unfortunately now after using the print utility to scan for a while that has now gone again on the last restart of the Mac. I am so completely clueless
The box says the printer is compatible, the place of purchase said it was compatible, the Samsung site says it is compatible.
I think it's the set up of my Mac? Our maybe a glitch in the network settings?
Thanks again -
How to get Gopro studio on older iMac with OSX 10.6.8?
I have an 06' iMac with OSX 10.6.8 that can no longer update to newer versions. I recently got a Gopro 4 Silver only to learn that I cannot download the Gopro Studio editing software to my outdated OSX. The software requires a minimum of 10.8. Can anything be done to put the software on my iMac? If not, will any of the Apple software edit my Gopro media files?
Would appear from detailed viewing of iMac models circa 2006, none of them could be used
to run an OS X version as new as Mountain Lion 10.8.5. Most can't run Lion 10.7.5. So the
answer would be to find a newer model computer that can run Mountain Lion, or newer...
Depending on what kind of files the GoPro generates, the ability to edit, alter, and use them
will vary. Certain editing software exists, but the details of what is still available for older OS X
and your configuration, is sketchy at best. That is one of the reasons why the maker suggests
their GoPro device and/or software needs a later OS X system. Major upgrade. (OS + Mac)
The information on various Mac products can be read online at sites such as Everymac.com
where they show all models of a product name, and info about almost every mac built. To
use resources to see what kind of later computer may be affordable, available, and run the
software you already have, may take time. To keep a useful older computer at the best-last
state in OS X, with its software, is helpful if you have other applications that work for you.
Then you'd just need to find a niche product, such as a MacBook Pro from 2010; perhaps
a Late 2012 model 13-inch. Maybe even an earlier MacBook; these are no longer made.
Some reputable sellers offer restored or repaired older vintage Macs. For newer ones
that can run later Mac OS software, the Apple Store has their refurbished pages. These
are fairly current. Older ones no longer under any AppleCare plan, can be found at
shops that repair them for a living; or used. Be careful when buying used products, read
to see if there were issues, damages, and be sure to get the accessories & system discs
if the model is old enough to have DVDs included. Oh, be sure if you get a used Mac that
is newer, did not ship with install DVDs, the original owner has not tied it to their AppleID.
A promised upgrade in a used Mac, to Yosemite, does you no good if the computer is
tied to a former owner, and their password and their Apple ID accounts.
In any event... to use that peripheral will require a newer computer & later OS X version.
Good luck & happy computing! -
I am using a new imac with osx lion 10.7.5 and have just bought Apple iLife 11 on dvd so that I can install iWeb and iDVD, as macs no longer ship with these apps. When I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate.
Next problem is that when moving through the installer and get to custom install, as I only want to install iDVD and iWeb, I am presented with the option to install iDVD, Sounds & Jingles and iWeb, but not sure what is going on with the other 3 options iLife Support etc, they seem to be greyed out but still look like they may install over the top of the newer versions already on my imac. Is it ok for me to just go ahead and hit install? Or do I have a problem?Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
Then use Software Update to get any late iDVD updates. -
Wacom Intuos Tablet and Pen not working on new iMac with OSX 10.9.4
Hi there, I've been using an A3 Wacom Intuos tablet and pen for many years now on a 2006 iMac for my illustration work, but I cannot get them to appear or work on my new iMac with OSX 10.9.4. I think they are the original Wacom Intuos tablet and pen. Does anyone know if they are just out of date now and aren't supported on the new OSX 10.9.4? Any advice would be greatly appreciated as I need to work and it's frustrating!
Many thanks,
SteveBarbara B.
I have done as you suggested; I uninstalled PSE 11 and set my wife's account up as admin and reinstalled from there. Still have the same problem with my wife's account, but when I went to mine it is working correctly. Any ideas on why that would be? I'm sure it should work on both accounts. I have 2 accounts on my Mac Mini running OS X 10.6 Snow Leopard and it works on both.
Thanks for your help; at least it's working on my account so that's a great improvement. -
I am unable to register by Adobe flash builder 4.7 with the key i got from complimentary upgrade to Adobe Flash Builder 4.5
Please helpKind of. I never actually solved the bug, but I did make it past the install.
Upon running Adobe Flash Builder 4.7 Plug-in Installer it appeared to crash and only load a blank screen with a single unclickable button. It wasn't actually "hanging", and would react when I clicked on the program menu and moused over "Services". This would allow my clicks and keystrokes to register with the program, but only after I mouse over the "Services" menu item. For example, you need to click "okay", then mouse over "Services". When you want to enter text you need to click in the text box, and mouse over "Services". Then you need to type the text you want, and mouse over "Services" to see the text appear. It's a PITA, but you can get through the install by doing this.
After installing the FB plug-in starting eclipse with editors open appeared to cause errors. If this happens, this is because it seems that FB attempts to load when eclipse starts up. Close all editors and restart eclipse. The Welcome page for FB may pop open up. At the bottom there is a check box that will keep that form loading - check it. If the page does not open when eclipse starts, then open up an MXML file. The Welcome page should load, and you can check the box.
I hope this helps you move forward. Also, if you find an actual solution please let me know. -
Should i use adobe flash on an iMac?
Are There any problems with installing Adobe Flash on my IMAC?
Yes, but only download and update it from Adobe - Install Adobe Flash Player
-
Old imac with osx 10.5.8 How do I upgrade to a more recent os?
I've recently been given an old imac with OSX 10.5.8. The itunes is 10.6.3 (25)
I'm having no joy downloading newer versions.
What do I do?
Please someone help.
Thanks>About This Mac
What processor do you have? -
I'm considering FileVault usage on an iMac with OSX 10.6.7. Wanting to know more about strengths and weaknesses of Filevault with Time Machine, Parallels and Carbon Copy Cloner. Any negatives to consider before flipping the switch? Any information ?
Would specifically like to know:
Filevault impact on performance and application usability.
TIme machine impacts, and whether TIme Machine volume will also be secure?
Will a Cloned copy made with CCC be bootable, or usable?
Any other negatives to consider before turning this thing on?
Thanks,Filevault impact on performance and application usability.
FileVault encrypts the user's home directory only - it is basically an encrypted disk image that is automatically opened when you log in and closed when you log out. It does cause disk accesses to be a bit slower so it isn't a good idea to use an encrypted account with sound or video or large graphics files. I have no experience with it with Parallels Desktop but suspect that you'd notice a bit of a slowdown. Note: in the User's directory you'll see a Shared Folder. Since FV only encrypts the user's directory you can put data you don't need encrypted in this shared folder which won't be encrypted.
TIme machine impacts, and whether TIme Machine volume will also be secure?
There are issues with TM and FV but how extensive they are with Snow Leopard I can't say, once I realized that TM and FV hadn't substantially changed between 10.5 and 10.6 I stopped dealing with it. When FV and TM were first introduced my testing led me to recommend using CCC or SuperDuper! for backing up.
Will a Cloned copy made with CCC be bootable, or usable?
Yes
Any other negatives to consider before turning this thing on?
Since FV is nothing more than a disk image - and disk images can fail - there are several problems with FV in my opinion. If an encrypted disk image fails it isn't possible to access any of that data. If you don't have a recent (undamaged) backup of the disk image and/or recent backup of the data within the disk image you are in a world of hurt. This isn't just a warning of possibility - this is a real danger that I've seen all too often at the shop where I have worked part time for a number of years.
At this time I strongly recommend that people who have sensitive data keep that sensitive data segregated from their general data and encrypt only the sensitive data or use other methods of locking it down such as saving on an external drive that is kept in a safe. Call me paranoid but I don't even keep all my sensitive data in one encrypted disk image. I use multiple disk images and keep multiple sequential backups. That way I might someday find that my up-to-date investments disk image won't mount but (a) I can go back a week to a backup and (b) that won't impact my up-to-date business records because those are in a different disk image
Maybe you are looking for
-
Problem with Queue Table while dropping schema
Hi, I want to DROP a schema, but it gives the following error while trying to drop it: ORA-00604: error occurred at recursive SQL level 1 ORA-24005: must use DBMS_AQADM.DROP_QUEUE_TABLE to drop queue tables From TOAD, I found that no queue or queue_t
-
Hi All, We have requirement to change the Database name of the Database which is in ASM. The question : Can we copy the datafiles with in the diskgroup as we are changing the databse name , the directory structure will change Can y ou post the proced
-
How to save requisitions without using E-Recruiting
Hello All, Is there a way, to save requisitions data without using the E-Recruiting Web pages? Is there a Function module or a Class or a BAdI that I can use? We want to use a Interface that will send a flat fille with a lot of data and then to handl
-
Cant seem to delete OracleXE and reinstall.
My OracleXE has a lot of problems. Sometimes it couldnt connect to the server, and cannot display the appropriate pages, and today i couldnt even run the home page. i decided to delete the program and re-install. And there is this error message, "the
-
hi i am using OS 10.8.5 i have a problem moving items to trash when i move a specific thing to trash it deletes from that folder but does not appear in trash and my hard drive space is not getting free i am a new user to mac kindly help me out