What am i doing wrong ? wireless config issue
im at a loss, i have setup a 1131 with multiple ssid's, they show up, but neither one will connect. i need 2 ssid's, one open and one protected. this is the config i have so far:
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ap
enable secret 5 $1$lrBX$8Z39Oh0JQPGmxWdHEvXo20
ip subnet-zero
ip domain name s02710.US.wal-mart.com
ip name-server 10.223.80.132
no aaa new-model
dot11 ssid Ncc Guest
vlan 30
max-associations 50
mbssid guest-mode
dot11 ssid Ncc Staff
vlan 20
max-associations 50
mbssid guest-mode
dot11 network-map
power inline negotiation prestandard source
username Cisco password 7 14341B180F0B
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid Ncc Guest
ssid Ncc Staff
mbssid
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
bridge-group 30 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
ssid Ncc Guest
ssid Ncc Staff
mbssid
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio1.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
bridge-group 30 subscriber-loop-control
bridge-group 30 block-unknown-source
no bridge-group 30 source-learning
no bridge-group 30 unicast-flooding
bridge-group 30 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
hold-queue 160 in
interface FastEthernet0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.30
encapsulation dot1Q 30
no ip route-cache
bridge-group 30
no bridge-group 30 source-learning
bridge-group 30 spanning-disabled
interface BVI1
ip address 192.168.1.175 255.255.255.0
no ip route-cache
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
control-plane
bridge 1 route ip
line con 0
line vty 0 4
login local
end
But, its not working.... what have I done wrong?
Its currently hooked through a simple linksys router. I can ping through console and reach out, so that is ok.
Hi Brend,
You have mentioned that you have one ssid open and other other as protected..But i'm not able to see relavant config for the same on AP.
Assuming you are using open authetication of Ncc Guest SSID, try applying below config and see if it is connecting?
dot11 ssid Ncc Guest
authentication open
For other SSID you have not mentioned what protection (WPA/WPA2 etc...) you are using and hence not able to guide with the configuration.
Regards
Najaf
Similar Messages
-
Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?
I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks. -
Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory
These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying. -
i do all the steps to set wirelessly my TC but when i do my network can't find it. i don't have a modem near by but i have good signal to the mac. what am i doing wrong?
Since you mention that the "modem" (which I'm guessing is a wireless router) is not close to the Time Capsule, I'm guessing a second time when I ask if you are trying to configure the Time Capsule to "join" your network using wireless only.
Is that correct? -
What am I doing wrong - size issue
Need some advice...as usual!
I designed a site on my 17" monitor and set the margins to 0
and table to 100%. However when I look at it on different screens
it looks rubbish...big gap at the bottom of the page with the
design cramp at the top. I wonder if someone would mind looking at
my code and see what's wrong with it. The site was designed using
various techniques including css for nav bars, tables, and
fireworks elements. the site can be viewed at:
www.shelleyhadler.co.uk/nerja.html
thanks for your help. Shell>Re: What ams I doing wrong - size issue.
Several things...
First, your 17" monitor has noting to do with web page
layout. What
resolution is your monitor set to? it could be 800 pixels
wide or 1280
pixels... wouldn't that make a difference? That aside, screen
resolution and
size are irrelevant anyway. What counts it eh size that your
viewers have
their web browser window set at.
I have a pretty large monitor, set to a very high resolution,
so I open
several windows at once and size them so I can see the
content in all.
Sometimes my browser is full screen and sometimes its shrunk
down to less
than 600 x 800. Your web site needs to accommodate that.
Every web viewer
out there is different and likes the way they have their
screens set up. So
you need to be flexible and your site needs to be flexible.
Next, Don't design in Fireworks and import to Dreamweaver.
Fireworks is a
superb web ready graphics and imaging processing program. The
authors
(mistakenly) threw in some web authoring stuff that works
very poorly.
Design your pages using Dreamweaver. Learn html markup and
css styling to
arrange it, then use Fireworks to create graphics to support
your content.
Along the way, be aware of the diffferant browsers in use.
Internet
Explorer is the most popular (or at least most in use) simply
by virtue of
the Microsoft market share, but it is also the least web
complient (by virue
of the Microsoft arrogance) so some things that work there,
(like your green
bands) won't on other browsers and vice versa.
That said... graphically, your site looks great. You have a
good eye for
composition and simple clean design. You just need to learn
to use html to
your best advantage to create some realy nice looking and
nicely working
sites.
"shelleyfish" <[email protected]> wrote in
message
news:[email protected]...
> Need some advice...as usual!
>
> I designed a site on my 17" monitor and set the margins
to 0 and table to
> 100%. However when I look at it on different screens it
looks
> rubbish...big
> gap at the bottom of the page with the design cramp at
the top. I wonder
> if
> someone would mind looking at my code and see what's
wrong with it. The
> site
> was designed using various techniques including css for
nav bars, tables,
> and
> fireworks elements. the site can be viewed at:
>
> www.shelleyhadler.co.uk/nerja.html
>
> thanks for your help. Shell
> -
I cant set up my older wireless keyboard with my iMac. The Apple site shows this keyboard model as needing a USB keyboard and mouse for initial set up, but I dont know how to do that. Blue tooth finds the keyboard, yet when I need to type the passcode, nothing happens. the keys wont function. What am I doing wrong? Thanks
I cant set up my older wireless keyboard with my iMac. The Apple site shows this keyboard model as needing a USB keyboard and mouse for initial set up, but I dont know how to do that. Blue tooth finds the keyboard, yet when I need to type the passcode, nothing happens. the keys wont function. What am I doing wrong? Thanks
-
I extracted the part of my VI that applies here. I have a 6602 DAQ board reading a counter for frequency, using a Cherry Corp proximity sensor. Getting a lot of noise and errant ridiculously high readings. Speed of shaft which it's measuring is currently 2400rpm with one pulse per revolution so 40hz.
Trying to use the express filter VI to clean up the signal and ignore anything over, say, 45hz and under 35hz. No matter what setting I choose I continually get the 20020 error, Analysis: The cut-off frequency, fc, must meet: 0 <= fc <= fs/2. I know this relates to sample period somehow, but for the life of me I can't understand what I'm doing wrong.
I used this VI without filtering on bench tests with a hand-drill and got perfect output every time. Now it's on the machine and being erratic. Any help here will ease my stress level significantly, thanks.
VI attached
Still confused after 8 years.
Attachments:
RPM.vi 92 KBHello Ralph,
I'm not sure about mounting your sensor to your rig, but I can provide a couple ideas about the filtering. Depending on the type of noise, the digital filters on the PCI-6602 could help eliminate the behavior you are seeing. If the noise manifests as a "glitches" or a bouncing signal, you could use another counter with a minimum period to help eliminate the noise. This concept is discussed in greater detail in this KnowledgeBase. I noticed that you are using NI-DAQmx; the practical application of the digital filters on the PCI-6602 in NI-DAQmx is discussed in this KnowledgeBase. A more detailed description of the behavior of these filters is provided in the NI-DAQmx Help (Start>>All Programs>>National Instruments>>NI-DAQ) in the book entitled "Digital Filtering Considerations for TIO-Based Devices".
I also wanted to comment on your original post and explain why you were receiving error -20020. For convenience, I have copied the text of the error code below.
Error -20020 occurred at an unidentified location
Possible reason(s):
Analysis: The cut-off frequency, fc, must meet: 0 <= fc <= fs/2.
I think you may have misunderstood exactly what the Filter express VI does. The Filter express VI takes a series of values in a waveform and performs filtering on those signals. So, it will look at a waveform made up of X and Y values and apply the defined filter to this waveform. Specifically in your application, the cut-off frequency (fc) is the Upper Cut-Off level that you specified in the Filter express VI; any frequency components of the waveform outside of the range you have defined will be filtered. The fs is the sample rate based on the data that you wire to the Signal input of the Filter express VI. In your VI, this data is coming from the DAQ Assistant. So, fs will be the sample rate of the DAQ Assistant and is associated with the rate at which points are acquired. The sample rate does NOT relate to the bandwidth of the signal, except that the Nyquist theorem tells us that the sample rate must be at least twice the signal bandwidth in order to determine periodicity of the signal. So, in this case, the sample rate of the DAQ Assistant would need to be at least double the high cut-off frequency.
However, you are performing a frequency measurement using a counter. I think this is where the confusion comes in. For the frequency measurement using a counter, the DAQ Assistant returns a decimal value which represents the rate of the pulse train being measured by the counter. It does not return the actual waveform that is being read by the counter. It is this waveform that would be band-pass filtered to eliminate frequency content outside of the filter's bandwidth. Instead of the Filter express VI, I would recommend that you simply discard values that are outside the range you specify. I have modified the code you posted earlier to perform this operation. The image below shows the changes that I made; rather than using the Filter express VI, I simply compare the frequency to the "Low Threshold" and "High Threshold". I use a Case structure to display the value on if it is within the limits. Otherwise, I display a "NaN" value. I have also attached the modified VI to this post.
Message Edited by Matt A on 09-04-2007 07:58 PM
Matt Anderson
Hardware Services Marketing Manager
National Instruments
Attachments:
RPM (Modified).JPG 17 KB
RPM (modified).vi 72 KB -
Everything I own (iPad, iPhone, mac) is set up on wi-fi. when i bring my work computer home (dell laptop), I cannot get it to keep the connection in a different room. All my other devices work.... does anybody know what i am doing wrong? please help!
Windows drivers for Intel wireless cards are known problematic.. If you have plenty of signal and it still cannot keep or hold the connection the issue can simply be the type of wireless.
Another problem is using names that windows does not easily handle.
eg If you set the TC using apple names, like
Fred Blog's Airport Time Capsule wireless24ad12
Then to windows this is too long.. it has spaces and it has illegal character.
Change all names on the TC to suit windows. Short, no spaces and pure alphanumeric.
Also security must be suitable.. I have no idea how old or what OS your dell is, but if you still have issues.. pull off the security on the TC for a test.. if the computer suddenly works, it is not compatible with WPA2 AES. Make sure you also use a password that is mix upper and lower case plus numbers.. avoid special characters and make it 10-20 characters long say.. it is not required to be more than that unless you are paranoid. -
I'm working on trying to pair my bluetooth keyboard with the Mac. They seem to pair just fine, I can enter the code but when it's time to "enter" it won't take it. Any suggestions on what I'm doing wrong??
Thank you!!Hi, Chris.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing this issue.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
Cheers,
Jason H. -
I uploaded a CD to itunes it shows in my library but it does not show up on my iphone 5. What am I doing wrong?? working on this for 2 days now and still cannot figure it out.
I'm also having the same problem, when before I hadn't. I've been trying to research this issue too w/ little success. All of a sudden I realized that not all my songs were playing and red squares w/ red circles appeared next to a bunch of music on my playlist. So I tried to delete my playlist & re-sync but I couldn't get alot of my songs back onto my iphone 4. I believe we're being forced into subscribing to the itunes Match where it stores all your music (purchased & uploaded) on the cloud. Hoping I'm wrong.
-
I purchased an album on ITunes store, while the items downloaded to my phone, it didn't download to my mac. Some of the songs downloaded but not the majority, when I try to download the songs, it gives me an error 8003 Unknown error occured. What am I doing wrong? If I can't download this album, how do I get a credit??
Hello mercdw,
Once the music has been downloaded to your iPhone, you can transfer purchases from your device to iTunes.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Alternatively, the following article provides further information regarding this error and steps that can help resolve the issue.
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista: \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7: \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP: \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers,
Allen -
Hi, I have dowloaded the creative cloud onto my windows 7 system and I can install most things but when it comes to downloading the trial for photoshop I get nothing!!!!! What am I doing wrong??? Can someone please help! :-/
Hi,
You can try to download creative cloud Desktop.
https://creative.adobe.com/products/creative-cloud?promoid=KLYVF
Once it is downloaded try to sign in and then try to download the applications.
Some useful links:
Creative Cloud Help | Install, update, or uninstall apps
Troubleshoot Creative Cloud download and install issues
Thanks,
Nikhil Gupta. -
After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
My iPad one won't charge with any cable I buy? Tell me what I am doing wrong.
I have an iPad 1 and have had no major problems with it til now. I want to continue using it, I use it for many things and it would suck if it stoped working because of something IDK about. My first and only apple product.
The charger cable (That came with it) finally broke. The wires just came apart and it wasn't salvagable. I had an Ipod cord here that a friend left and plugged it into the original port (The one that was working fine with original charger and came with ipad). It was a tight squeze into the iPad (which I thought was normal) but I got it into there so I thought it would work. It won't work. So i bought a charger said to be used to ipads, and I plugged it in, same thing happened. I did however still sync it into the computer with the new cable I bought. What am I doing wrong that it won't charge on the wall anymore? Wrong cable? I'm confused. Please help!Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Using Adobe Photoshop Elements 10 Editor as external editor in Aperture. The issue is once i make the changes in Photoshop it request that I save (use tiff) and the photo is not update in Aperture. What am I doing wrong?
Marianne,
how do you save? Photoshop Elements can save either versions or overwrite the original file, afaik.
You need to set the save preferences, so that it will write to the original file and not write a version. Also the filename extension should be "tiff" and not the default "tif" (I think you did that already).
Regards
Léonie -
I am trying to save a photoshop CS6 psd file to jpg and get an option jpg, jpg2000 or jpg stereo, I choose jpg and then Mac 256 colours, normal or interlaced. I just want regular jpg with a high resolution. What am I doing wrong? , never had this problem before. Help!!!
Your description of the issue is not clear:
What format, bit depth and color was your original file "from the net"? It sounds like it was a Color Indexed GIF, which would cause what you are describing.
In the Macintosh Finder, select said "net image" and do a Get Info on it (Command+i). When the Info box appears in the Finder, take a screen shot and upload it here by using the little camera icon in the Reply Editor in the forum's web interface.
If the image is a 256-color GIF, remember the rule: GIGO = garbage in, garbage out.
Maybe you are looking for
-
Can I use an external monitor in portrait mode?
I do not yet own a Mac, but I am doing up-front research to know what to expect. I currently have a Samsung 204T LCD monitor (DVI) which allows rotating the display into portrait mode. I know that OS X supports using an external monitor to extend or
-
Itunes 10.5 wont open after update
I updated itunes to 10.5 and it worked fine, now it will not open using Windows 7 saying "itunes has stopped working a problem occured...' but with no error code, its getting a little silly with all these bugs with iOS 5 & itunes 10.5 is it too much
-
Hi, How do I filter on multiple values / labels within a large data set within a Pivot Table which points to a Power Pivot Model. I am current using Excel 2010 64 bit. I intend to empower users to achieve this by simply using the Excel user interface
-
I forgot to mention it is an ipad 4 with the new applecare+. I met with the owner at verizon where he disconnected the service and I added it to my verizon plan so I know it is a legit deal from Craigslist. I can't get in touch with him and the one y
-
NullPointerException (Unknown Source) in Serializable class
Hi, I have a Serializable class, and I just added a new class variable to it, with its get and set methods. When I try to call either the get or the set method from outside the class, I get a NullPointerException, which refers to the method in the fo